Used Injector Feeder for sale (2,740)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) Chodpfxjyuuzdo Ac Tob • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: good (used), Year of construction: 2006, turning length: 305 mm, turning diameter: 320 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, rotational speed (max.): 5,000 rpm, quill diameter: 65 mm, quill stroke: 80 mm, bar passage: 51 mm, FANUC i Series control system Turret with 12 stations (non-driven) Tailstock Chip conveyor Chodpfxey S U Dhj Ac Teb Bar feeder IEMCA BOSS 545/32 E

Condition: used, Year of construction: 2008, Perfect binding line Müller Martini Pantera (1577) Year: 2008-2000 Consisting of Gathering machine Müller Martini 1571 Year: 2000 Description: Chjdpfoy R Ty Esx Ac Tjb - Hand feeding station - Number of gathering stations: 12 - ASAC automatic self adjusting calliper - Excluding pump(s) - Set up element - Transfer into the binder Perfect binder Müller Martini Pantera (1577) Year: 2008 Description: - Colour monitor with touch screen - Hand feeding - Number of clamps: 12 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - PUR premelter for PUR spine glue unit: MOD 30 POT (2007) - Hotmelt side glue - Premelter for side glue unit: Nordson Durablue 4 - Gauzing station - Drum cover feeder - Scoring station - Nipping and pressing station - Lay down device Transport system Müller Martini 3520 Year: 2008 - Transport system, length (approx): 8 mtr Max. mechanical speed: up to 4.000 cycles/h Maximum size range: 380 x 320 x 50 mm Minimum size range: 120 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Documents

Condition: excellent (used), Year of construction: 2009, operating hours: 19,000 h, Ref:11108 . 2009 Muller Martini ‘Acoro A5’ Perfect Binding Line Excellent condition line with only 19,000 hours worked! Comprising: 16 x 1571/21" top loading feeders + hand feed station ASAC thickness control ASIR III signature recognition & 3715 reject unit M.M. 3642 automatic book block feeder M.M. 'Commander' automatic make-ready Muller Martini 3026-20 ‘Acoro A5’ with 20 x Combi-clamps Measuring table for automatic make-ready ICS C80 & 30 EVA pre-melt tanks EVA spine gluing tank EVA Hot-melt side gluing tank Gauzing station Pile/rotary cover feeder 2 x nipping stations Lay-down delivery unit to; Two tier 180 degree flat conveyor system to; M.M. 3671 ‘Merit S’ three knife trimmer Including accessories, tools & manuals. N.B. Compressed air required – NOT included. Specification: Chodpfxszaa Rbs Ac Tsb A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm Clamp opening, Max: 82 mm Open cover width, : 203 - 642 mm Mechanical speed, Max: 5,000 cycles/hr.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. Codpfx Aszhi Uqsc Tjhb FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. The plant minimizes production time with its unique location just in front of the screen.

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Condition: Completely Overhauled Features and Technical Specifications: - Equipped with a new glue application system - Manually adjustable feed guide - Pre-milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pneumatic press unit 1816 - Trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush) - Blower nozzle, complete - Scraper unit 1929 - Chip collection box Chjdszk Nlhepfx Ac Tjb - Surface scraper, 1964 - Exhaust hood set - Complete set of protective covers - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge banding thickness depending on configuration: 0.4–5 mm - Edge banding height, max.: 55 mm - Edge banding strip length: min. 350 mm - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Exhaust: - Jointing unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: - Joint milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Min. air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: available shortly Location: Röllbach

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a Günther injector for meat, fish, and cheese, type PIH57M from 2017 – a compact, automatic machine for injecting brine and marinade with a capacity of 30 l/min. Chjdpfx Acsyibhqe Tob The device has been designed for the processing of meat, poultry, fish, and cheese, where even distribution of brine, improvement of taste and color, and increased yield of the finished product are important. The PIH series is specially designed for the requirements of poultry and fish injection, with a high needle density for the best possible distribution of brine in the product. The Günther PIH57M injector operates at 400 V, 1.6 A, 50 Hz, requires 6 bar compressed air and provides a capacity of up to 30 l/min with an installed power of 2 kW. The set includes a brine filter, documentation and spare parts, which facilitates quick implementation of the machine into production and subsequent servicing. Technical data: Manufacturer: Günther Maschinenbau GmbH Type/model: PIH57M Year of manufacture: 2017 Application: injection of meat, poultry, fish, cheese Power supply: 400 V, 50 Hz Current: 1.6 A Operating pressure: 6 bar Capacity: up to 2000 kg/h Number of needles: 57 Needle diameter: 3 mm Maximum product height: 150 mm Working width: 280 mm Power: 2 kW Equipment: filter, documentation, spare parts Machine dimensions: L: 1800 x W: 800 x H: 2500 mm Their outstanding features are: Rugged construction Compact design High injection accuracy Easy operation Easy to maintain High flexibility Easy to clean

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Material feed slide length: XLL Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm Chsdpfx Aszk E Irec Tob

Condition: used, Length: 285 cm Belt width: 32 cm Chsdszdnnzspfx Ac Teb Side rail height: 11 cm Overall height: 24 cm Belt for food processing Stainless steel Manufacturer: Haith Please check out my other listings.

Condition: used, Length: 1000 cm Codpfxszduwis Ac Tjhb Belt width: 45 cm Working width: 62 cm – with side guards and splash guard Side guard height: 11 cm Overall height: 26 cm Belt suitable for food processing Stainless steel Manufacturer: Haith Please check out my other listings.

Condition: used, Length: 480 cm Belt width: 90 cm Distance between scrapers: 32 cm Scraper height: 8 cm Side rail height: 23 cm Overall height: 47 cm Belt suitable for food processing Stainless steel Manufacturer: Haith We offer a wide selection of conveyors. If you need one with different dimensions, please inquire. Codpfx Acezdvnpo Tohb Please check out my other listings.

Condition: used, Length: 400 cm Belt width: 60 cm Side guard height: 10 cm Overall height: 24 cm Drum diameter: 10 cm Belt for food processing Stainless steel Manufacturer: Haith We offer a wide selection of conveyors; inquire about the size you need. Codpfx Aszdvp Hjc Tehb Please check out my other listings.

Condition: used, Year of construction: 1999, Offset 8 color with perfecting Heidelberg SM74-8-P-H Year: 1999 Number of impressions (mio): 247 Machine control - CP 2000 Feeder - Preset feeder - Suction feeder table - Double sheet control - Steel plate in feeder Printing units - Number of printing unit(s): 8 - Machine with perfecting: 8/0, 4/4 - AutoPlate Csdpfx Aezdcx Aec Tshb - Alcolor dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans Delivery - Standard delivery - Powder spray

Condition: excellent (used), Max board width: 16 cm. Magazine height: 70 cm. Overall dimensions: Height 180 cm, width 60 cm, length 200 cm. Chedpsy Avf Usfx Ac Tsb

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: Fanuc 21T range of revolution per miute: 20 - 6300 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 kW electrics - voltage/frequency: 400 / 50- 60 V/Hz Weight approx.: 1,0 t dimension machine approx.LxWxH: 2,2 x 1,0 x 1,62 m Csdpfxsy Emfwe Ac Tshb The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria). It is positioned in the mid-range performance and size segment and is frequently used in training, workshops, and production. It is particularly designed for the precision machining of small parts, shafts, and chuck components. Automatic chuck Interface for bar feeder available Various accessories *

Condition: excellent (used), functionality: fully functional, Min./max. workpiece height: 15-100 mm Min./max. workpiece length: 500-2000 mm Csdpfsymn Rcjx Ac Tohb Min./max. workpiece width: 25-230 mm Feed speed: 5-36 m/min

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 160 t, stroke length: 150 mm, overall weight: 19,000 kg, Equipment: CE marking, Single-point hydraulic knuckle press, complete with accessories. Uncoiler, straightener, feeder, and safety guards. Manufactured by HANIL KNUCKLE PRESS CO LTD, South Korea – 2018. Model HKCA-160. Pressing force: 1600 kN. Maximum pressing point (R.T.P.): 4.0 mm before the lower dead center. Slider stroke: 180 mm. Working speed: 80 strokes/minute. Maximum die height: 450 mm. Slider adjustment: 100 mm. Work table: 1300 x 700 mm x 14 mm thick. Working slider: 900 x 600 mm. Air pressure: 5 bar. Dimensions (Width x Length x Height): 2100 x 1800 x 3450 mm. Csdpfsy Twgzjx Ac Tohb Weight: 19 tons. Main motor: 15 kW.

Condition: used, The device is in good working order and ready for use. Chsdpey Ua Epsfx Ac Tsb The machine was used for dispensing mayonnaise into buckets. Height: 1800 mm Width: 950 mm Length: 1600 mm Please check my other listings.

Condition: refurbished (used), functionality: fully functional, - Reker multi-bucket excavator, 45 l bucket - Petersen multi-bucket excavator type EKBL 14/45/4, 45 l bucket; - multi-bucket rope excavator, 45 l bucket; - Rieter multi-bucket excavator type LBD -G30/4; - Rieter Werke box feeder type KBN - 6.0, belt width 1200 mm, length 6 m; - Haendle box feeder type BK1250/600x6; - Witte-Loehmer box feeder, upper structure approx. 3 m; - Large-sized Hochreuter und Baum box feeder with a 6 m upper structure, 130 m2; - Haendle box feeder type BKS 120b, 1508b; Cedpoymdf Nsfx Ac Tohb - Haendle box feeder type BKL 3.58; - Haendle box feeder type BKG 1035A

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Technical Specification Counter Spindle No Chodpoy E I Hiefx Ac Tob Driven Tools Yes

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg Cjdpfxsy Ulzie Ac Tehb

Condition: good (used), mileage: 653,000 km, power: 170 kW (231.14 HP), first registration: 07/1995, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 4,050 mm, fuel: diesel, fuel tank capacity: 300 l, color: orange, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro2, suspension: steel, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1995, Equipment: ABS, differential lock, = Additional Options and Accessories = - 6-speed manual transmission - Heated exterior mirrors - Leaf spring suspension - Comfort driver's seat - Differential lock - Speed limiter - Hydraulic system - Radio/CD player - Rotating beacon - Power take-off (PTO) - Power take-off (PTO) = Notes = Cjdpfx Acezu R Rge Tjhb GOOD CONDITION M.A.N. 17.232F (F90 / 6-CYLINDER ENGINE) 4x2 FULL STEEL CHASSIS WITH CONTAINER SYSTEM & MANUAL GEARBOX!! 230HP, EURO 2, 6 CYLINDER ENGINE (MECHANICAL PUMP & INJECTORS)!! 6-SPEED MANUAL GEARBOX!! FULL STEEL SUSPENSION!! LOCKING DIFFERENTIAL!! P.T.O.!! HYDRAULIC KIT!! ETC.!! CONTAINER BODY!! SIZE CONTAINER SYSTEM; LENGTH x WIDTH x HEIGHT Approx.: 4.70 m x 2.50 m!! TRUCK IS IN GOOD WORKING CONDITION, READY FOR THE JOB!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 6x6 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (/) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 6,587 cc Transmission Transmission: ZF 6-SPEED MANUAL, 6 gears, manual gearbox Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 7100 kg; Steered; Tire tread left: 40%; Tire tread right: 40% Rear axle: Double tires; Differential lock; Max. axle load: 11500 kg; Tire tread left inner: 20%; Tire tread left outer: 20%; Tire tread right inner: 20%; Tire tread right outer: 20%; Reduction: single reduction Weights Unladen weight: 8,180 kg Payload: 8,820 kg GVW: 17,000 kg Functional Body brand: MEILLER CONTAINER BODY Loading platform height: 100 cm Condition Technical condition: very good Optical condition: very good Further information Please contact the Sales Department for further information.

Condition: used, offer consist of: - one clamp perfect binder BQ-280 - 2kg pre melter of SM-Klebetechnik Horizon BQ-280PUR one-clamp perfect binder - clamps: 1 - spine gluing: PUR - glue refill: by pre melter - sight gluing: hotmelt - book block thickness: integrated monitoring station (outside the clamp) - milling section: with extraction - milling depth: adjustable - cover feeder: suction drum feeder with 4x scoring - technology: touch & work - saveable jobs: 200 memories for repeat orders Cedpjzwu Inefx Ac Tshb - sheet size: max: 385 x 320 mm; min: 135 x 105 mm - cover size: max. 660 x 385mm; min. 240 x 135mm - book thickness: max. 50mm; min. 1mm - cover weight range: 90 - 300 g/sqm - cover pile hight: max. 70mm - speed: max. 500 cycles/h dimensions: 3.055 x 905 x 1.520mm - power: 400V/ 50Hz - 2,7kW -weight: 900kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Codezwvtxepfx Ac Tehb Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: new, input voltage: 400 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 25 A, welding current (max.): 400 A, Lorch iQS series – Top-level welding for maximum productivity in industrial manufacturing Maximum performance and reproducible quality: The Lorch iQS series is a powerful, digitally networked MIG-MAG welding system for demanding industrial applications. The newly developed inverter generates an exceptionally stable and smooth arc. All parameters can be continuously adjusted to the optimal operating point – for high-quality, reproducible welds on steel, stainless steel, and aluminum. The iQS is suitable for both manual welding and robotic integration, providing a future-proof platform for modern manufacturing companies. Less spatter, less rework: The innovative Smart Process Control Engine enables continuous development of the available welding programs. New processes and functions can be transferred to the system, ensuring that users always work with the latest technology. The integrated RCS module improves short-circuiting in particular: the process runs more cleanly, the weld pool is easier to control, and spatter formation is reduced. This increases weld quality and reduces time-consuming and costly rework – especially on thin sheets under 3 mm. Chodpfszwfgbex Ac Teb Lorch Speed processes for higher productivity: Depending on the configuration, proven Lorch processes such as SpeedPulse XT, SpeedArc, SpeedTwin, SpeedRoot, SpeedUp, and SpeedCold are available. They enable higher welding speeds, better penetration, attractive weld bead surfaces, and precise process control. Users receive a flexibly configurable solution for a wide range of materials, weld geometries, and welding positions. Intuitive operation with Smart Cockpit: The robust 7-inch Smart Cockpit can be operated via touchscreen or rotary control – even with welding gloves. A clear menu guides users, displaying only suitable material, wire, and gas combinations, thereby reducing incorrect settings. Important parameters can be accessed immediately via the configurable QuickAccess menu. Current values are visualized during welding; subsequently, the Hold function indicates whether the specified parameters have been met. Networked, robust, and easy to service: WLAN and Lorch Connect enable the recording, documentation, and analysis of welding data, as well as updates and future function upgrades. The encapsulated air duct, the dust-protected electronics area, and the modular design simplify maintenance and ensure uncomplicated service. Optionally, the robust MF-09 wire feeder complements the system with 4x4 drive, a quick-change system, and various chassis and transport options. Technical performance variants: The iQS 3 offers a welding range of 25 to 320 A, and the iQS 5 offers a range of 25 to 400 A. Both models operate on 3-phase power supplies from 380 to 480 V, have an IP23S protection rating, and a robust 4x4 wire feed unit. The equipment and scope of delivery depend on the chosen configuration. Document 1: technical details IQS series (EN) Document 2: brochure IQS series (EN) Document 3: technical data IQS series (DE) Document 4: brochure IQS series (DE)