Used Inject Star Brine Mixing Station for sale (10,205)

Condition: good (used), Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintenance, 13Kw motors, high shear overhauled 2017, level detection, 50mm discharge pipe, 3Ph Iedpfoulz Haox Afuoih

Year of construction: 2016, condition: used, Gas supply: natural gas from the public gas network, gas treatment: drying using a molecular sieve, max. refueling pressure: 300bar(g), natural gas compressor station capacity: 630m³, storage type: SP28, storage pressure: 300bar(g), inlet pressure: 2.5-700mbar(g), storage type: SP28, storage volume: 2.24m³, storage pressure: ≤300bar(g), compressed air/gas supply (Pₛ,in/Pₛ,out,EGT): 1bar(g)/300bar(g), temperature range: -10 to 50°C/-10 to 60°C, volume flow rate: 74-113Nm³/h, power consumption: 36kW, noise level: 65dB(A) at a distance of 1m, length: 4,850mm, width: 2,690mm, height: 3,100mm, weight: approx. 30t, including documentation. Ijdpfx Aez R A Nxefujih

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Iijdpfx Aez Dhnrsfueh Plug combination for electrical connection

Condition: used, Year of construction: 2008, Technical details: max. turning diameter: 350 mm turning length: 1040 mm control: OSP E 100 L Fanuc greates pass round over bed: 550 mm Max. distance between centres: 1200 mm max. workpiecediameter: 550 mm Traverse X-Axis 1: 270 Traverse X-Axis 2: 230 mm Traverse Y-Axis 1: 120 (±60) mm Iijdpfxjz Ig Sqj Afujh Traverse Z-Axis 1: 930 mm Traverse Z-Axis 2: 920 mm Spindle 1 Power: 22 / 15 kW Spindle 1 RPM: 5000 1/min spindle nose: JIS A2-8 bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 VDI 40 Turret 1 tool RPM: 4500 1/min Turret 1 power rotary tools: 7.0 / 3,3 kW Turret No.2 stations / rotary tools: 12/12 VDI 40 Turret 2 tool RPM: 4500 1/min Turret 2 power rotary tools: 7.0 / 3,3 kW rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 26 m/min rapid traverse Z-axis: 40 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 7,0 x 2,3 x 2,3 m Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck 300 mm CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets. There is an Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 7 identical machines available, all in very good and well maintained condition. *

Condition: used, Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Iijdpfok Aa Rnox Afujh Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Belt width: 400 mm Axle distance: 708 mm Deflection roller: 68 mm Funding speed: 1.9 m/sec Engine power: 0.55 kW Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2000, Clamping unit 22 ton Max / Min Plate space 400 / 200 mm Screw: 22 mm Injection pressure 1732 bar Iijdpsz Sl H Refx Afuoh Injection volume 30 ccm Shot weight: 27 g/PS Weight: 950 kg

Year of construction: 2018, condition: used, There are six Arburg ALLROUNDER 320C 500-170 available, year of manufacture: 1x 2006, 1x 2008, 2x 2012, 1x 2013, 1x 2018, an on-site inspection is possible. Iisdpfxez Sr Rnj Afuoh

Year of construction: 2016, condition: used, Rated current: 44A, connected load: 25,5kW, an on-site inspection is possible. Iisdpfez S Iucjx Afueh

Year of construction: 1996, condition: used, Rated current: 117A, connected load: 68kW, an on-site inspection is possible. Iedpfx Afjz S Ivgjusih

Year of construction: 2015, condition: used, There are two Arburg ALLROUNDER 270S 350-70 available, an on-site inspection is possible. Iodpfez S It Sjx Afujih

Condition: new, mileage: 1,690 km, first registration: 09/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 23, total length: 1,000 mm, total height: 1,000 mm, Equipment: ABS, USB port, air conditioning, cruise control, retarder, = Additional options and accessories = Ijdpoz Da D Sofx Afujih - Air conditioning (driver) - Air conditioning - Webasto heater = Further information = Damage: none = Company information = We are an international company based in Belgium, near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers an extensive parking area serving as a showroom. We always have numerous buses of all brands, capacities, models, and in every price range in stock. We can find the right coach, school bus, or city bus tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical errors reserved. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: used, fuel type: electric, Year of manufacture: 2013 Lifting capacity: 230 kg Ijdpfxezflile Afujih Please contact Gebrauchtgeräte Center for more information

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Ijdpfx Afslc R Rxeujih Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: used, Year of construction: 2015, machine/vehicle number: 00, ACM Vertical Sawing Machine, Model Star 700 Ijdpelp Irrofx Afueih Year of manufacture: 2015

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Iijdjb Tmrvspfx Afuoh Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: good (used), functionality: fully functional, machine/vehicle number: 5.000 Liter-Tankstelle, tank capacity: 5,000 l, 5.000 l diesel or heating oil pump station Iiodpodccdqsfx Afuoh

Year of construction: 2025, condition: new, machine/vehicle number: 100119-4, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips  Input material 0-200 mm Iijdpfjg I Uqiex Afujh  Capacity approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversize  To be mounted on customer-supplied impact plates or a base frame Technical data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area 6.3 m², number of shafts 40 o Drive: 2 x 9.2 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes possible) o Bearing lubrication located externally, optional central lubrication system available at an extra cost Delivery time approx. 16 to 18 weeks.

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 Iijdpegrzh Esfx Afueh 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: excellent (used), Year of construction: 2003, Piovan material dosing unit colouring station Type Model: MDT 14 -- 1MD 1840 Specification: PA 58D /54S M Year of construction: 2003 volumetric dosing capacity: 0,1 to 3,2 kg./h Ijdpfx Aohupq Esfusih hopper volume: 15 ltr. 2 separate dyeing stations + 1 main hopper tested for functionality before dismantling available immediately in our warehouse Hannover /Germany

Year of construction: 2005, condition: excellent (used), 16 stations design: cassette shaft Ø: 45 mm strip width: 300 mm Ijdpfoh I Nizox Afueih strip thickness: 2 mm

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 24-month warranty Stainless steel model Advantages: + Excellent price-performance ratio + Simple and quick installation and operation + Housing made entirely of stainless steel + Can also be combined with an ice water system + Unit automatically opens the required water supply, providing hot/chilled water + Delivers the correct mixture until the desired temperature is reached + Powerful electronic system based on a microprocessor + Water dosage from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + Digital display of water temperature and quantity + Temperature is adjusted with a thermostatic mixing valve (rotary knob) + Fast supply of spare parts within 1-2 working days STANDARD accessories included in the price: - 1x drain hose (2 meters long) with hanging hook Technical data: - Dosage quantity: 0.1 - 99.9 liters or 1 - 999 liters - Temperature range: 0°C to +40°C (depending on water supply) - Power: 25 W - Water pressure: 2 - 4 bar (recommended) - Connection values: 230 V - 1 phase - 50/60 Hz Iodpfx Asivdxmsfujih - Dimensions: 305 x 120 x 390 mm (W x D x H) - Net weight: 6.8 kg

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Iiedpoibyatofx Afush Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Year of construction: 2016, condition: used, Suitable for Kolbus BF 512 Iedpfx Aeid Nvwefuoih

Condition: good (used), Sapphire 120L high shear mixing tank Stainless, high shear mixing vessel, variable speed mixer, pressure vessel, jacketed with adjustable temp settings, bottom mounted high shear, central bottom discharge, mobile, 1Ph Iisdpjrwz Rdsfx Afush

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating hours: 100 h, Gravimetric dosing and mixing system: Mixing system with 5 gravimetric dosing units 5 units: • Gravimetric screw dosing unit • Feeding hopper with pneumatic rotary valve, each with a lid • Screw conveyor for feeding from a big bag, with height-adjustable individual stand Iiedpfot S Rduox Afuoh 1 unit: • Trough screw for combining and conveying the dosed materials into a transfer container. 5 units: • Big bag feeding station, with a suspension crossbeam to prevent the big bag from collapsing during emptying. • Big bag disc base with discharge aid (vibration drive) Option not included in the price: Control cabinet including control system Delivery EXW