Used Hinowa Goldlift 14.70, Spin Hoogwerker for sale (1,607)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, height adjustment type: mechanical, RM Group Spindle Moulder (Under Spindle) Specification: • Condition - used, fully serviced • Manufacturer - RM Group • Model - SM 110 Iedow Avxbopfx Aatjif • Spindle diameter 30 mm • Motor power 4 kW • Star-delta motor starter • 3 belt-regulated spindle speeds: 6,000 / 8,000 / 10,000 rpm • Manual up/down adjustment • Original paintwork • Extraction port - 120 mm • Year of manufacture - 2009 • Weight - 360 kg • Dimensions: 112 x 75 x 115 cm (L x W x H) Additional information: • Very good, factory technical and visual condition • The presented photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 Iedpfovcfhmox Aatjif - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are offering this machine for sale. It is connected and can be tested under power. A video of the machine can be sent via WhatsApp. Centre height above bed: 1,250 mm Maximum swing diameter over cross slide: 2,000 mm Maximum swing diameter over bed: 2,500 mm Maximum workpiece weight between centres without supports: 80 t Bed height: 700 mm Bed width: 3,000 mm Ijdpfxsv Spvms Aatoif Distance between centres: 7,000 mm Machine weight: approx. 160,000 kg

Condition: used, Year of construction: 2011, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Mechanical counter Iijdpfxszdzbue Aatef Swivel angle indicator: Mechanical counter Milling stop indicator: Mechanical counter Milling spindle diameter: 30mm / new milling spindle Spindle speeds: 1500, 3000, 4500, 6000, 9000 Motor power: 4 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1000mm Machine depth: 1200mm Weight: 580kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 750 mm, quill stroke: 110 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 22 rpm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Weiler Condor AC stepless rotary machine Iiedpfx Aasruqzcjtef

Condition: used, Year of construction: 2020, - Brand : Skyjack - Type : SJ16 - Year of construction: 2020 - Weight: 980 kg. - Hours: 64 hours - Drive: 24-volt battery - Built-in battery charger (220 volts) - Working height: 6.75 meters - Non-marking tires - New safety inspection possible - Aerial work platform book available - CE document available - Trade-in and transport possible * Brand: Skyjack *Type: SJ16 * Weight: 980 kg. Iijdpsy A S Eqsfx Aatef * Construction year: 2020 * Hours: 64 uur * Working height: 6.75 meters * Drive: 24 volt battery

Condition: used, Year of construction: 2007, Aichi rm04b Bj 2007 / 2009/2010/2011 Weight 630kg Iijdexcgatjpfx Aatof LxWxH 78x 130 Fits through a door Equipped with CE+ approval and built-in charger Ready to use and super powerful

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer you: Manufacturer: GGF / MAG Type: SPECHT 500 DUO Year of manufacture: 4 x 2011 / 1 x 2014 Control system: Siemens 840D sl Technical data: Travel distances: X-axis: 750 mm Y-axis: 650 mm Z-axis: 560 mm Main spindle: Spindle speed: max. 16,000 rpm Drive power: 40 / 26 kW Table dimensions: Working area diameter: max. A 1,100 / B 710 mm B-axis table plate diameter: 2x 450 mm Load weight: max. 2x 290 kg Tool changer: Tool holder: HSK-A63 Iiedpfxezl D Hvj Aatjf Feed rates: Axis speed: max. 60 m/min A total of 5 machines are available. 4 units manufactured in 2011, 1 unit manufactured in 2014. Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), mileage: 25,119 km, power: 103 kW (140.04 HP), first registration: 03/2022, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, Year of construction: 2022, Equipment: ABS, central locking, electric window regulation, power mirror, = Additional options and accessories = - Beacon(s) - Leaf spring - Stairs - Toolbox = More information = General information Number of doors: 2 Cab: single Registration number: GE820ZD Axle configuration Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels Functional Make of bodywork: MOVEX TLR 16 Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Iiodpfx Aaszmyt Ustjf When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2018, - Brand: LGMG - Type : AS0608 - Year of construction: 2018 - Hours: 172 hours - Weight: 2050 kg. - Working height: 8 meters - Lifting capacity: 380 kg. Iijdpjy Dfxtofx Aatof - Drive: Battery - Non-marking conveyer belts - Safety inspection until 12-2026 - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible *Type: AS0608 * Construction year: 2018 * Hours: 172 uur * Weight: 2050 kg. * Drive: Battery * Working height: 8 meters CE document: Yes * Lifting capacity: 380 kg. Video on website: Yes Aerial work platform book: Yes * Brand: LGMG

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control unit, converter, controller, servo line former, drive control unit, AC mainspindle drive, spindle controller -Manufacturer: Indramat. AC mainspindle drive from a Mikron VC500D CNC machining center -Type: KDA 3.2-100-3-AP0-W1 -Art.: 776781-001 Iijdpfoztppfsx Aatsf -Dimensions: 485/390/H150 mm -Weight: 17.8 kg

Condition: used, Year of construction: 2018, - Brand: LGMG - Type : AS1012 - Year of construction: 2017 + 2018 - Hours: 23 + 293 hours - Weight: 3000 kg. - Working height: 12 meters - Lifting capacity: 320 kg. Iijdjy A Tp Djpfx Aatof - Drive: Battery - Non-marking conveyer belts - Safety inspection until New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: LGMG *Type: AS1012 * Construction year: 2017 + 2018 * Hours: 23 + 293 hours * Weight: 3000 kg. * Working height: 12 meters * Drive: Battery * Lifting capacity: 320 kg. CE document: Yes Video on website: Yes Aerial work platform book: Yes

Condition: good (used), Year of construction: 1979, Table dimensions 1100 x 760 mm Motor output 4,7 kW Spindle diameter 30 mm Iisdpfjzhcg Tox Aatef reus 4 U/min Weight 850 kg Year 1979

Condition: used, Year of construction: 2022, - Brand: Rees - Type : AMWP6100-5.6 - Year of construction: 2021 + 2022 - Weight: 810 kg. - Hours: 5 - 14 hours - Working height: 5.6 meters - Drive: 24-volt battery - Built-in battery charger (220 volts) - Length: 135 cm. - Width: 75 cm. - Height: 170 cm. Iisdpfx Aoy A S Aijatef - Non-marking tires - New safety inspection possible - Aerial work platform book available - CE document available - 7 x in stock - 5.6 meters - Trade-in and transport possible * Brand: Ropes *Type: AMWP6100-5.6 * Construction year: 2021 + 2022 * Weight: 810 kg. * Hours: 5 - 14 hours * Drive: 24 volt battery * Working height: 5.6 meters * Long: 135 cm. * Width: 75 cm. * High: 170 cm.

Condition: used, Year of construction: 2018, - Brand: LGMG Iiedpfx Aaey Dcrketof - Type : AS0812 - Year of construction: 2018 - Hours: 249 + 270 hours - Weight: 2691 kg. - Working height: 10 meters - Lifting capacity: 450 kg. - Drive: Battery - Non-marking conveyer belts - Safety inspection until 12-2026 New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible *Type: AS0812 * Construction year: 2018 * Hours: 249 + 270 hours * Weight: 2691 kg. * Drive: Battery * Working height: 10 meters CE document: Yes * Lifting capacity: 450 kg. Video on website: Yes Aerial work platform book: Yes * Brand: LGMG

Condition: used, Year of construction: 1980, machine/vehicle number: 18.742, Table milling machine with rigid milling spindle Table size 1,920 x 900 mm, Motor 6/8 kW (8/11 HP), Iiedpeul Sfmofx Aatjf 4 speeds 3,000/6,000/4,500/9,000 rpm, Milling arbor D = 30 mm with Morse taper MK 5, weight approx. 700 kg, ex location Seevetal, Sale in "as is" condition as inspected, without transportation, subject to prior sale

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant! Technical data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working Area Travel distance in X/Y/Z: 135 / - / 590 mm Iodpfxsxyvbnj Aatjif Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MK 2 Quill stroke: 80 mm Dimensions (LxWxH): 1,280 x 730 x 1,480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest demands: with stepless speed control, constant cutting speed, and a robust 7.5 kW drive power (40% duty cycle). The compact machine with outstanding performance is ideal wherever maximum precision in limited space is required, such as optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a lathe EMCO EMCOMAT 14 D with Emco digital readout, manufactured in 2006. This lathe is in excellent original condition. It was only used occasionally in special production. The control system is very user-friendly. The guides are regularly lubricated by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. You are welcome to inspect and test the EMCO EMCOMAT 14 D under power at our premises. You will find further lathes from renowned manufacturers on our website.

Condition: used, Cnc multispindle lathe INDEX MS16C Iisdpeztk A Hsfx Aatsf

Condition: used, Cnc multispindle lathe INDEX MS 16C Iijdpfjztk A Tox Aatjf

Condition: good (used), Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 480 mm, spindle bore: 78 mm, turning length: 1,000 mm, VDF Boehringer D48 Equipped with Heidenhain digital readout Good condition Extensive range of accessories Forkardt wedge bar chuck Numerous sets of base and top jaws 400 mm faceplate Isdpfjxqh Rcox Aateif Steady rest Multifix quick-change toolpost with a variety of holders Various lathe centers and tapers The machine can be inspected at our production site.

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm Iedpfezr U Dlex Aateif - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AB /139622, functionality: fully functional, input frequency: 50 Hz, pivoting range: 56 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,300 rpm, Equipment: CE marking, rotational speed infinitely variable, We are offering this well-maintained SCM T 150 Class spindle moulder, year of manufacture 2000. Iisdsy Ir Ezspfx Aatof Description: Spindle moulder with 3-axis control and 999 program memory slots (spindle height, fence, spindle tilt, revolutions) Spindle tilt -10° to +46° Inverter motor, adjustable spindle speed from 3,300 to 10,000 rpm Table extensions at front and rear Swivelling fence Clearance between cutter and table is adjustable Very good condition, minor signs of use Including accessories: • 5 additional SK40 quick-change spindles • Curved fence • Power feeder with stand • Various hand tools If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital display, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. Iedpfx Aasxyvaqstjif CE compliant!! Technical specifications: Year of manufacture: 2006 Model: EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe for the highest demands: with stepless speed control, constant cutting speed and an impressive 7.5 kW drive power (40% duty cycle). This compact machine with outstanding performance is ideal wherever maximum precision is required in limited spaces, such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is an EMCO EMCOMAT 14 D lathe with Emco digital display, year of manufacture 2006. This lathe is in excellent original condition and comes from a facility where it was only used occasionally for special applications. The control system is very user-friendly. The guideways are lubricated regularly by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our premises. You will find more lathes from renowned manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with EMCO digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special construction department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Iedpfx Aaexyvbbetsif Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Inner taper: MT 2 Quill stroke: 80 mm Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the Machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and a robust 7.5 kW drive (40% duty cycle). This compact powerhouse excels wherever maximum precision is required in limited space, such as in optical, electrical, and automotive workshops, laboratories, and even in Formula 1. For sale is an EMCO EMCOMAT 14 D lathe with EMCO digital readout, year of manufacture 2006. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special construction purposes. It features an extremely user-friendly control. The ways are regularly lubricated by the central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power on-site. You will find more lathes from well-known manufacturers on our website.

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Isdpfx Aaoxz Edzstoif