Used Graule Akf 5/300 for sale (66,924)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 24,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,290 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs Wheel chocks with holders Full-width rear mudflap 1 plastic toolbox Preparation for extensions to 3,000 mm (holes in outer frame with covers, not in rear bevel) #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 7 pairs of recessed 10 t lashing points in top and side outer frame 1 on front gooseneck 5 in low bed 1 in rear bevel 12 pairs of 5 t lashing holes in outer frame (for load straps) 5 on gooseneck, 6 in low bed and 1 in rear bevel #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R17.5 Manufacturer's choice Twin steel wheels, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads with connecting lines to towing vehicle Connecting lines extended by approx. 60 cm Without ABS, with mechanical ALB, max. 60 km/h approval #Electrical System 12 V multi-chamber lights, without yellow side LED lights, with side reflectors 2 front white position lights Ibjdpfx Ajznyrmsf Eea 2 rear white/red outline marker lights 1 x 7-pin 12 V front plug with connecting cable, extended by approx. 60 cm 1 removable LED beacon with bracket, switched via side lights #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 5,900 mm #Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates Registration country: Germany With DEKRA inspection and approval report for max. 60 km/h registration, agricultural towing vehicle Prepared for two-line number plate holder Without contour marking / reflective strips according to ECE R 048 #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Drawbar galvanised or black, manufacturer's choice Loading ramps hot-dip galvanised

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 24,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,290 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs 2 wheel chocks with holders Half-shell mudguards on 1st axle Quarter mudguards behind 2nd and 3rd axles Side underrun protection Yellow side LED lights instead of reflectors Full-width rear mudflap (not in combination with forklift mounting) 1 lockable plastic toolbox, W 600/H 425/D 460 mm #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 7 pairs of recessed 10 t lashing points in top and side outer frame 1 on front gooseneck 5 in low bed 1 in rear bevel 12 pairs of 5 t lashing holes in outer frame (for load straps) 5 on gooseneck, 6 in low bed and 1 in rear bevel #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R17.5 Manufacturer's choice Twin steel wheels, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads with connecting lines to towing vehicle Connecting lines extended by approx. 60 cm Without ABS, with mechanical ALB, max. 60 km/h approval #Electrical System 12 V multi-chamber lights with yellow side LED lights Flashing side LED lights linked to indicators 2 front white position lights 2 rear white/red outline marker lights 1 x 7-pin 12 V front plug with connecting cable, extended by approx. 60 cm 1 removable LED beacon with bracket, switched via side lights 2 pairs of illuminated warning boards, extendable to 3,000 mm #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Approx. 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 5,900 mm #Loading Ramps Steel ramps, 3,000 mm long, 750 mm wide, laterally adjustable Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Isdpfx Aoznw U Eof Eoba Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Paint Finish Chassis painted DB 7350 Nova Grey "10 Jahre Gewährleistung gegen Durchrostung" Drawbar galvanised or black, manufacturer's choice Loading ramps hot-dip galvanised

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,780 kg, maximum load weight: 23,220 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 lockable plastic toolbox, W 600/H 425/D 460 mm Extendable outriggers to 3,000 mm Central storage compartment for timber planks 70 mm timber planks for 3,000 mm extension #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 4 pairs of 5 t lashing holes in gooseneck outer frame 7 pairs of recessed 10 t mushroom lashing points in top and side outer frame 1 on front gooseneck 6 in low bed First lashing point 250 mm from front, last max. 250 mm from rear 5 pairs of combined stake pockets with bolted ring lashing eyes, 5 t each, recessed in outer frame, approx. 72 x 42 mm internal size 2 pairs of additional 10 t folding lashing rings 1 on gooseneck (protruding) 1 recessed in floor behind last axle #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R 17.5 steel wheels, twin fitment, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads 24 V ABS and ALB with front ABS plug #Electrical System 24 V LED multi-chamber lights, yellow side LED lights, LED number plate light 2 front white LED position lights 2 rear white/red LED outline marker lights 2 x 7-pin non-interchangeable front plugs 1 LED beacon with bracket 2 pairs of illuminated LED warning boards, extendable to 3,000 mm #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Approx. 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 6,500 mm #Loading Ramps Steel ramps, 3,000 mm long, 750 mm wide, laterally adjustable Additional folding lower ramp lock Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates 24/7 service hotline "Gewährleistungsverlängerung auf Rahmen auf 5 Jahre ab Auslieferungsdatum" Prepared for two-line number plate holder Ibsdpfx Afjznwzro Esa Reflective contour markings to ECE R 048, white sides, red rear #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Galvanised drawbar Hot-dip galvanised loading ramps

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,100 kg, maximum load weight: 23,900 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs Wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 lockable plastic toolbox with shelf, W 600/H 425/D 460 mm Extendable outriggers to 3,000 mm Central storage compartment for timber planks 70 mm timber planks for 3,000 mm extension #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 5 pairs of 5 t lashing holes in gooseneck outer frame 7 pairs of recessed 10 t mushroom lashing points in top and side outer frame 1 on gooseneck 6 in low bed First lashing point 250 mm from front, last max. 250 mm from rear 5 pairs of recessed stake pockets in outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional 10 t folding lashing rings 1 on gooseneck 1 recessed in floor behind last axle #Drawbar Equipment Iodpjznwdyofx Af Ejba Drawbar with certified 40 mm towing eye #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R 17.5 steel wheels, twin fitment, factory silver "RDKS" tyre pressure monitoring system to ECE R 141, display in towing vehicle via EBS #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads with connecting lines to towing vehicle 24 V EBS electronic braking system with front EBS plug #Electrical System 24 V multi-chamber lights with yellow side LED lights Flashing side LED lights linked to indicators 2 front white position lights 2 rear white/red outline marker lights 2 x 7-pin non-interchangeable front plugs 1 LED beacon with bracket 2 pairs of illuminated LED warning boards, extendable to 3,000 mm #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Then 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 6,500 mm #Loading Ramps Steel ramps approx. 3,000 mm long, 750 mm wide, laterally adjustable Additional folding lower ramp lock Timber-covered Spring-assisted lifting #Operating Instructions At 10,000 kg axle load, a special permit is required; only indivisible loads permitted! #Registration / Plates Registration country: Germany 24/7 service hotline Reflective contour markings to ECE R 048, white sides, red rear Warning plate to ECE 70 #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Loading ramps hot-dip galvanised

Condition: ready for operation (used), Festo 559342 / EGSL-BS-75-300-20P mini slide, used, in good condition, 100% fully functional, delivery as shown in the photos. Ibedpex Erlpsfx Af Eoa

Condition: ready for operation (used), WEG W22 motor with Karl Klein DNG 6-25/TS-300°C fan SN: 1612-302113, used, in good condition, fully functional, scope of delivery as per photos. Iedpfxex Dwins Af Esba

Condition: ready for operation (used), Indramat KDS 1.1-50-300-W1 AC Servo Controller / Servo Drive SN: 01517D, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Ibsdpfx Afey Nrxdj Eja

Condition: new, Brinkmann TS 21/300-MV+211 submersible pump SN:0412003832-92658001 ,unused, 100% functional, scope of delivery as per photos Iodour A Uxopfx Af Eoba

Condition: ready for operation (used), Indramat TFM 3.1-050-300-W1-220V frequency inverter MNR: R911234797 SN:23515802541, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as per photos Iodpex Dw H Tsfx Af Eoba

Condition: ready for operation (used), Indramat KDV 2.3-100-220 / 300-000 Power Supply SN:248468-02566, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Iedpox Etyhefx Af Eeba

Condition: ready for operation (used), JW FROEHLICH MFL 300 leak tester SN:6/50 600.02, the locking cylinder of the front door is missing, see photo, used, normal signs of use, 100% functional, scope of delivery as per photos Ijdsrv S Dqepfx Af Ejba

Condition: ready for operation (used), JW Froehlich MFL 300 leak tester, front door fastening latch missing—see photo, SN:6/50 600.01, used, normal signs of use, 100% functional, scope of delivery as per photos. Ijdpfex Etzxex Af Eeba

Condition: new, Pleiger hydraulic motor MO 300/200 Ijdox Uq Dcepfx Af Esba KM No. 6257639

Year of construction: 1968, condition: ready for operation (used), pressing force: 306 t, stroke length: 400 mm, Hydraulic 4-Column Press manufactured in 1968. This Müller SE 300-25.1.1 is designed for metal pressing applications, featuring a stopping time of 89 ms and a stopping distance of 75 mm. If you are looking to get high-quality metal forming capabilities, consider the Müller SE 300-25.1.1 machine we have for sale. Contact us for further details. • Machine Type: Hydraulic 4-Column Press • Application Type: Metal Press / Forming Press Isdpfszd Dmasx Af Eoba • Stopping Time: 89 ms • Stopping Distance: 75 mm • Safety Distance: 160 mm

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Machine type: Tie-Bar-Less Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: 88,000 h Technical specifications: Clamping force: 3000 kN (300 t) Design: Tie-Bar-Less Closing unit: Hydraulic POWER Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight (PS): approx. 1050 g Ibsdpfxjzrv A No Af Eea Injection pressure: approx. 1700 bar L/D ratio: approx. 20:1 Control system: ENGEL CC200 Robot interface: Yes Robot: Not included Hydraulic core control: 2 units Power supply: 400 V / 50 Hz Hydraulic system: POWER Central lubrication: Yes Oil cooling: Yes Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: 20,400 kg

Year of construction: 2020, condition: used, Year of manufacture: Apr 2020 New: No Serial number: Z 11 Y065066 Ibsdpfxsy D Nyns Af Eoa Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: new, Made in Italy. Maximum turning height: 300 mm Turning diameter over bed: 600 mm Turning diameter over slide: 380 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm Motor power: 9.2 kW (optional equipment / standard: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Ibedpfxod Nk Nco Af Eja Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide travel: 340 mm Top slide travel: 150 mm Tailstock ram diameter: 85 mm Tailstock ram travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital readout - Automatic lubrication of the guideways - LED lighting - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick-change tool holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g., Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: chuck guard with Plexiglas panel, secured by microswitches. Tool holder guard with Plexiglas panel. Rear splash guard over the entire length. Lead screw and feed screw protection by light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip container on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price including 3-axis digital readout.

Year of construction: 2025, condition: new, The hammer mill HM 300 is ideally suited for grinding soft, medium-hard, brittle materials such as catalysts, electronic scrap, gypsum, epoxy resin and many more. Max. Feed size Ibodjf Ulynjpfx Af Eja

Year of construction: 2024, condition: new, The jaw crusher JC 300 is ideally suited for crushing of hard, brittle, hard tough samples like ceramics, clinker, coke, construction materials, ferro alloys, glass, minerals, ores, precious metals, rocks, silicon, slag and many more. Iedpfx Afsf Uclfs Eeba Max. feed size*

Year of construction: 2024, condition: new, The roller crusher RC 300 is ideal for crushing medium-hard, brittle, hard materials such as coal, ores, slag, minerals, graphite, bitumen and many more. Iedpfoiamttsx Af Eoba

Condition: good (used), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1,340 mm Number of bays / row of shelves: 01 pcs. 1,280 mm each Number of levels plus base level: 08 pcs. The scope of delivery includes: 02x shelf uprights, second choice Material color: sendzimir galvanized Isdpfx Aet Hdgfof Eeba Frame profile dimensions: 31 x 60 mm incl. cross and diagonal braces The uprights are unassembled 1,534 mm high 300 mm deep 08x shelves, second choice Material color: sendzimir galvanized Dimensions: 1,282 x 300 x 30 mm f. Stand depth: 300 mm Weight per unit: approx. 4.79 kg 01x Pedestal cover, used Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight per unit: 0.71 kg 01x Cross brace, II. choice Designation: KV31013 Material color: sendzimir galvanized 48x open fronted storage box, II. choice (new) Manufacturer: SSI Schäfer Type: LF 321 G Color: dark grey Material: Polypropylene External dimensions (LxWxH): approx. 209 x 145 x 343 mm Weight per unit: 0.550 kg Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2026, neu 2026 070236 September 2026, Zwischenv Türkei 6900 € 133.17 € 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg Ibsdpfx Aswirmuef Eja motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: used, REMA double-grinding stand with dust extraction system and lighting RPM 1450 Power 2.5 HP Ibsdpfx Afozpflzs Eea

Condition: good (used), Year of construction: 1998, machine/vehicle number: D 028005, Offer 26157 Technical data: - Grinding wheel diameter: approx. 300 mm - Grinding wheel width: approx. 40 mm - Grinding wheel bore: approx. 70 mm - Disc speed: 1450 rpm - Working height: 1050 mm - Drive: 400 V / 1.1 kW - Space requirement: approx. W 800 x H 1200 x D 600 mm Ibsdpfx Aezi Sx Iof Eea - Weight: approx. 150 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, punching force: 20 t, 1 Used Amada EM 2510 NT Servo Electric Cnc Punch Press For Sale Make: Amada Model: EM 2510 NT Punching Force: 20 Tons (200 kN). Axis Travel (X/Y): 2500 x 1270 mm (expandable for larger sheets) with reposition Turret Configuration: Typically 45-stations with 4 Auto-Index stations. Control System: touchscreen control. Positioning Accuracy: Servo-Electric Drive: Replaces hydraulic systems with a, single AC servo motor (AE) or twin-drive (EM) system. This reduces energy consumption, eliminates oil changes, and minimizes maintenance. Ijdpfeyyck Sjx Af Esba High Speed and Productivity: Capable of up to 900 hits per minute for marking, and 370 hits per minute on 1-inch centers. AMNC-F/3i Control: User-friendly, touchscreen interface for fast, error-free operations. Environmental Efficiency: The machine requires a low 19 kVA power hookup, drawing less than 5 kW at maximum power. Quiet Operation: Uses brush-type tables to reduce noise and prevent scratching on the underside of sheets. Tooling Efficiency: Features a "Triplet Track" turret and power vacuum die system to reduce tool changes and prevent slug pulling.