Used Gannomat 252/N for sale (51,959)

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 93200, turning length: 500 mm, turning diameter: 270 mm, spindle bore: 70 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 510 mm, overall weight: 4,200 kg, Working length 500 mm Max. working diameter 270 mm Swing over bed 440 mm Spindle speeds 36 - 3600 rpm Dodpfx Aaoy Ibipe Ieku Spindle bore 70 mm Number of tools 8 pcs X-axis travel 180 mm Z-axis travel 510 mm Control MAZATROL T - 32

Condition: repair required (used), functionality: not functional, Year of construction: 2009, load capacity: 2,500 kg, lifting height: 6,400 mm, mast type: triplex, power: 30 kW (40.79 HP), Equipment: lighting, sideshift, trailer coupling, Diesel forklift MITSUBISHI FD25N Year of manufacture: 2009 Exact operating hours unknown! 2.5 ton lifting capacity 2.85 meter overall height 6.40 meter lifting height 38 kW Mitsubishi engine - Triple-stage free-lift mast - Side shifter - Twin tires - Load guard !! Attention: Special price due to engine knocking !! Starts normally, and brakes and hydraulics are in good working order! Dksdozi Dqcspfx Aa Iju New forks! Selling price: €6,600 net Affordable delivery also possible!

Condition: used, mileage: 352,000 km, power: 380 kW (516.66 HP), first registration: 02/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Special equipment: Axle load – measuring device, front axle load 9.0 t, work lights, work lights on the upper rear wall of the cab, external mirror on the right with maneuvering position, battery 220 Ah, CB radio, air horn, cab: steel-sprung, comfort, suspension: front springs 9.0 t, 4 leaves, speed limiter, transmission 16-speed - type: G 280-16, electric tilting roof, rear axle bevel gear 300, interior filter for construction vehicles, fuel tank: 290 liters, aluminum, left, cooling capacity for hot climates, air compressor 2-cylinder, mounting plate / saddle plate 40 mm for fifth wheel coupling, mounting plate / saddle plate 40 mm for fifth wheel coupling 20 t, reinforced engine brake, reinforced engine mounting, auxiliary drive MB 131-2c, configurable special module, frame lowering without bellows residual pressure control, frame overhang 750 mm, smoker's package, retarder, reversing warning sound (external warning signal), fifth wheel coupling: manually lubricated, disc brakes with partial protection, interface for fleet management system, seat cover / upholstery: co-driver seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat, comfort suspended seat, sun visor external, sun protection roller side window, driver's door, 12V / 15 A socket in the co-driver's footwell (additional), 24V / 25 A socket in the co-driver's footwell, steep shoulder rims 11.75x22.5 (on front axle, reinforced), door extension for the cab, preparation / switch for lift axle on trailer / semitrailer, additional thermal insulation, auxiliary heater (water), twin-plate clutch Dsdpfx Aaszgt S Re Ijku Additional equipment: Emission standard EURO 6, axle configuration: 6x4, heated approach / front mirrors, trailer socket 24V / 15-pin, Arocs 5, step on cab left, cockpit multimedia, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: hydraulic tilting device, cab: L StreamSpace, 2.30 m, tunnel 170 mm, electric windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 liters, body / superstructure: semi-trailer tractor, comfort locking system, fenders 3-piece, steering assistance pump unregulated, steering wheel with multifunction, steering oil cooler, air intake behind the cab, heated air dryer, engine 15.6 liters - 380 kW R6 diesel (OM 473), engine variant OM 473, type of use: short-distance transport, wheelbase not defined, wheelbase variant 3300 mm, ramp mirrors, waste heat utilization, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: co-driver functional seat, steel rims 9.00x22.5, 12V socket in the co-driver's footwell, bumper corners front in steel design, tachograph / EC control unit, Truck Data Center 7 (fleet management system), turbocompound, preparation for toll collection, preparation Truck Data Center (fleet management system), front axle straight, permissible total weight 26.0 t, oil cooler transmission

Year of construction: 2025, condition: excellent (used), Separator TSP.155 The separator features five shafts, providing more space within the unit for the material to be loosened along the running/rotational direction of the shafts. The shafts are arranged in the housing at a 15° angle to each other, creating a progressive rounding effect as material is guided into self-rotation even before full engagement. This results in a significantly higher throughput and improved material quality compared to units with fewer shafts. Shafts BS252 Equipped are BS252 block disc shafts designed to break up very wet and stubbornly compacted soils, crush clods of earth, and efficiently mix additives such as lime or compound binders at high throughput rates. With this configuration, the Terra-Star enables soil processing long after other equipment would need to be withdrawn from use. For excavators from 27 tons Weight in kg: 2700 Dkjdpfx Aasyvrzxs Ieu Throughput: up to 120 m³/h Leak oil line required: 1 Series: 252

Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 400 Volt three-phase, 2 kW Saw blade diameter: 350 mm, bore: 30 mm Dkjdpfx Ajyv Aa Sea Ieu Cutting height: 85 mm Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Extraction port D = 100 mm

Condition: excellent (used), functionality: fully functional, power: 40 kW (54.38 HP), input current: 56 A, temperature: 450 °C, inner dimension length: 1,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,000 mm, total length: 1,900 mm, total width: 2,500 mm, total height: 1,600 mm, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, Chamber oven, make: Nabertherm type: N 1500/45 HA electrical heated max. temperature: 450°C internal dimensions (w x d x h): 500 x 1000 x 1000 mm external dimensions (w x d x h): 2500 x 1900 x 1600 mm circulation rate: 3600 m3/h gas inlet pressure: max. 25 bar gas outlet pressure: 0,2 / 2 bar nitrogen: 0,3 / 12 m3/h input frequency: 50 Hz input current: 56,3 A power: 39,9 kW Dkodpfx Aaszd Sd Tj Isu

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, fuel: diesel, continuous power (apparent): 140 kVA, input frequency: 50 Hz, Emergency generator set Year of manufacture: 2024 – fully functional. Dedpfeznh Rksx Aa Ieku

Condition: new, Oilgear PVWJ 034 A1UV DFY-P-1NNNN A N hydraulic pump, serial number: 11636335, unused, 100% functional, scope of delivery as shown in the photos. Dodpezirqdjfx Aa Ijku

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone at ...). Djdpfjyl Hggsx Aa Ieku Seppi M. MIDI-KASTOR / 5–15 t / Stump Grinder / NEW / In stock & available immediately Price: €15,290.00 net / €18,195.10 gross - Cutter disc width: 0.10 m - Cutter disc diameter: 0.60 m - Total width: 0.80 m - Depth: 1.10 m - Height: 1.15 m - Weight: 450 kg - Stump grinder for excavator mounting - For the removal of stumps and tree roots - Grinds stumps and roots up to 30 cm deep - Suitable for excavators from 5 to 15 t - For mounting on various adapter plates - Drive designed for hydraulic motor, dependent on carrier machine flow rate - Indirect V-belt drive with 5 V-belts - Double chain protection - Rotor equipped with 32 fixed carbide-tipped tools - Colour: Red RAL3020 · Anthracite RAL7021 OPT 073 PISTON MOTOR Axial piston hydraulic motor F12-60 cm³ with pressure relief valve - Displacement in cm³: 60 - Required hydraulic pressure in bar (min–max): 200 – 350 - Required hydraulic flow rate in l/min (min–max): 70 – 100 Optional: MS08 adapter plate incl. bolts and installation = €750.00 net For operation, an independent hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drain. The device is supplied without hoses, connectors, or adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. Our warehouse carries a wide range of Seppi M. products, all available for immediate delivery! Please contact us at ... for more information. We are also happy to prepare a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Price: per piece -Number: 2x available Dedpfxsb Uhmis Aa Ioku -Weight: 13 kg

Condition: used, Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings Djdpjcghhkjfx Aa Ioku -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from -Manufacturer: INA -Type: VLA200544-N -Outer diameter: 640.3 mm -Interior diameter: 434 mm -Height: 56 mm -externally toothed -Teeth: 105 -Module: 6 mm -Number: 6x bearings available -Price: per piece -Weight: 39 kg/piece

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 25 kg, total length: 350 mm, total width: 260 mm, total height: 210 mm, volume flow: 30 m³/h, input frequency: 50 Hz, type of cooling: air, rotational speed (max.): 2,850 rpm, warranty duration: 12 months, protection type (IP code): IP55, Oil lubricated rotary vane vacuum pump. Available in stock. Completely new. 12 months warranty Nominal flow: 25 m3 / h at 50Hz. Ultimate pressure: 2 mbar abs, Any clarification, do not hesitate to contact us. Dksdpfsftzx Eox Aa Iou

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 6x2500 SMO-2506-N Dodpfegih Upex Aa Ijku Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Dkedpfx Asi Dfidoa Iju Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: ready for operation (used), Rexroth MDD071C-N-060-N2S-095GA0 3-phase permanent magnet motor, serial number: MDD071-23219, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Djdpfxei D Ng Dj Aa Ieku

Condition: good (used), Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton Dkjdpfsr H Nllox Aa Ieu -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1000W LCH-1000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics Dkedpfx Aajthithj Iou MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1500W LCH-1500-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Dkjdpothitpefx Aa Iou Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg Dsdpfjif Satox Aa Isku

Condition: good (used), Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Electrical power: 220 V Drum diameter: 900mm Dedpfx Aasgth U Io Ieku Adjustable vibration

Condition: used, Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Manufacturer: Matrinor, load racks lashing points 4 pieces -Original use: aerospace industry -Payload: 9840 kg -Shackle mount: Ø 120 mm / M42 -Price: complete -Dimensions: 555/252 / H175 mm -Weight: 62 kg / pc. Djdpogt Rdpefx Aa Ioku

Condition: used, Hydraulic Pump, Oil Pump, Gear Pump, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Hydraulic pump comes: from an injection molding machine -Manufacturer: Battenfeld -double pump -Manufacturer: Flutec -Pump type: PT-350/2.3/N -Drive ABB motor type: MBT160L -Power: 15 kW 1455 rpm -with: clutch bell Dodpfxodwqp Do Aa Ioku -with: Bosch hydraulic valves -Dimensions: 1070/630/H500 mm -Weight: 232 kg

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling Djdpfst Trygex Aa Ieku -Manufacturer: Flender, shaft coupling -Type: N-Eupex Size 225 -Shaft: Ø 60/70 mm see photos -Dimensions: Ø 225 x 180 mm -Weight: 26.1 kg

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm nail length: 50-90 mm Dksdpfx Aouhxqmja Iju output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !!

Condition: good (used), We have two of these, the second unit is slightly larger than the model number I have given. they were only used for a short time as the project was cancelled. Dodpetq A Nusfx Aa Ioku