Used Eurocutter 2600 for sale (923)

Condition: good (used), Year of construction: 2009, Module from Kern 2600: EFQR Single Sheet Feeder right There is one missing element for the engine installation: part no: 2032468.001 Motor flange ELMO Ppjdpsy Iwq Nefx Al Nsu

Condition: good (used), Year of construction: 2015, functionality: fully functional, Module from Kern 2600: SIGR Continuous Forms Cutter right with K2600 Options Station Psdpfx Aloy Iwn Uj Njpu

Condition: new, functionality: fully functional, machine/vehicle number: 10200726, empty load weight: 410 kg, maximum load weight: 2,190 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 440 mm, Year of construction: 2026, Koch trailer, 125x250cm, 750kg, "Type U4" with a 150cm high cover. Passenger car trailer, Type U4, with a loading area of 125 x 250 x 150cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing high-quality trailers made in Germany for over 30 years. Special features: Double-walled, anodized aluminum side panel, 30mm (unique) Side panel with load securing system in V2A stainless steel (unique) Very stable tailgate latches made of V2A stainless steel (unique) Side panel fastening completely with 8 mm V2A stainless steel (unique) Four-sided lashing rail / railing on the lid (unique) 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional equipment: Tailgate easily removable Stable screen-printed floor panel, non-slip birch plywood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185/70 R13 tires, balanced and suitable for 100 km/h Steel sheet mudguards fastened with 8 mm stainless steel screws 12 Volt electrical system, 13-pole plug with reversing light 150cm high cover in gray Hook set mounted, hot-dip galvanized, also for net attachment Frame easily removable Other Vehicle registration document / registration certificate Part 2 Psdpei R Hw Hefx Al Nopu Accessories available at an additional cost, see below. If you would like to purchase this trailer or have further questions about trailers, please use our internal box trailer quote "No. U4-HP150-Offer".

Condition: ready for operation (used), Kalmar forklift for sale, 15t lifting capacity, 5m lift height, 17t own weight, 2.50m forks, hydraulically adjustable, sideshift. Cylinders were recently sealed. All tight, runs well, lifts 15t without interruption. All-terrain forklift, pneumatic tires, oscillating axle. Errors and omissions excepted. Pjdew Dbrpopfx Al Njpu

Condition: excellent (used), Year of construction: 2013, Doosan Puma MX2600ST Fanuc 31i-A with Manual Guide i Ppsdov Hyf Uepfx Al Nsu Swing over bed: Ø 1000 mm Max turning diameter: Ø 760 mm Max part length: 1540 mm Bar capacity: Ø 76 mm Movement: X1: 630mm Z1: 1585 mm Y: 230 mm (± 115 mm) X2: 220mm Z2: 1515 mm A: 1550 mm Left/right spindle: Spindle speed: 4000 rpm Spindle nose: A2-8 Spindle power: 22/26 kW C-axis: 360° (0.001) Milling spindle: 12,000 rpm Spindle power: 15/18.5/22 kW Spindle taper: Capto C6 B-axis: 0.001° Lower turret: 12 stations, 4000 rpm, BMT65P Tool magazine: 40 positions Automatic tool measurement Swarf conveyor Coolant for driven tools Coolant through milling spindle 1.5 KW , 2.0 MPA , 21.6 l/min Coolant pump for lower turret 2.2 KW , 1.0 MPA , 30 l/min Cutting force monitoring

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,163 mm, total length: 3,560 mm, total width: 1,945 mm, turning diameter over bed slide: 780 mm, overall weight: 6,550 kg, bar passage: 81 mm, Equipment: documentation/manual, I am offering a Doosan Puma 2600 SY II CNC lathe, a high-productivity machine equipped with a Y-axis, main spindle, and sub-spindle, ideal for complete machining operations in a single setup. The machine is fitted with a bar feeder and numerous accessories, is fully operational, and can be seen running by appointment. The lathe is in excellent operating condition, regular maintenance has been performed, and it can be demonstrated in idle mode by appointment. Included accessories: . Top Automazioni bar feeder model X-Files S380SX . Chip conveyor . Tool presetting system . Bellegrandi collet chucks on main and sub-spindle . Workpiece pick-off arm with conveyor belt Psdpfxoymdt Te Al Nopu . Static and driven tool holders

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, 6-axis CNC lathe with sub-spindle, driven tools and Y axis Ppsdpfxetvl U Hs Al Neu

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020.12.171, total width: 3,590 mm, total height: 2,910 mm, total length: 2,210 mm, grinding width: 2,600 mm, grinding belt speed: 2,400 mm/s, grinding belt length: 3,250 mm, workpiece height (max.): 80 mm, grinding belt width: 2,650 mm, air demand: 192 m³/h, Heesemann KSA 8 Wide Belt Sander 2600mm Width The sander consists of: 1. Frame Structure For mounting the transport bed, with attachment points for 1 sanding unit and 1 brushing unit. 2. Transport Bed Individual conveyor belts with feed speed adjustable from 5 to 25 m/min, controlled by frequency converter, constant working height of 920 mm. Adjustment to workpiece thickness (3 to 80 mm) by height adjustment of the entire machine top, including monitoring of the toothed belt for the lifting gear at a lifting speed of 3 mm/s, and integrated control cabinets. 3. Industrial PC 21.5" Capacitive multitouch color display, 1,920 x 1,020 pixel resolution, CF card, Windows Embedded Standard operating system, with production data acquisition (display of production and downtime). Ethernet connection available. Program memory for 1,000 programs. Motor speed values are stored and automatically set after program selection. 4. Profinet interface for higher-level control 5. Longitudinal sanding unit with contact roller for calibration (steel) Balancing quality Q 1 (finely balanced) according to VDI 2060, driven by poly-V belt, maintenance-free bearings. Diameter: 350 mm Abrasive belt dimensions: 3,250 x 2,650 mm Belt speeds: 1-24 m/s Drive power: 37 kW via frequency inverter Stepless adjustment of sanding belt speeds, wear-free brake device, intermittent belt blow-off device, automatic infrared belt control, sanding belt operates against feed direction, manual grit compensation Infeed: segmented, pneumatically controlled pressure bar Outfeed: continuous, pneumatically controlled pressure bar 6. Brush roller unit Central height adjustment, includes extraction hood and pressure roller. Brush material: horsehair Diameter: 250 mm Drive power: 5.5 kW 7. Workpiece vacuum clamping system For safe transport of workpieces shorter than 750 mm in feed direction, with integrated fan. Operating voltage: 400V, 50 Hz Machine paintwork: Internal: light grey, RAL 7035 External: light grey, RAL 7035 Doors: anthracite, RAL 7016 Brush insertion side: left Terminal: front left Pjdpfoywuqrsx Al Nspu 8. Ionizing bar, from above For dissipation of static charge, including high-voltage transformer 9. Workpiece blow-off device with rotating compressed air nozzles, at machine outfeed, including extraction hood General specifications of the sander: Sanding width: 2,600 mm Working height: 920 mm Maximum workpiece thickness: 3 to 80 mm Dust extraction: Required air speed, minimum 20 m/s Much higher extraction speeds may result in functional disadvantages. Machine underpressure approx. 1000 Pa Air requirements for: - 1 longitudinal sanding unit, roller diameter 350 (socket 1 x diameter 330) 103.0 m³/min - 1 brushing unit, diameter 250 (socket 1 x diameter 206) 38.0 m³/min - Workpiece blow-off (2 sockets x diameter 120) 28.0 m³/min - Conveyor belt blow-off (socket 1 x diameter 160) 24.5 m³/min - Exhaust air from fan for workpiece vacuum clamping system (socket 1 x diameter 180) 30.5 m³/min Total air requirement: 224.0 m³/min

Year of construction: 2016, operating hours: 15 h, condition: good (used), functionality: fully functional, machine/vehicle number: 6151654220, From our demonstration tool inventory, tested and fully functional: Psdpfx Alov Iphue Nepu Desoutter E-Lit Premium elektric pistol screwdriver ELS12-600P without battery with speed adjustment (via optional module) Idle speed: 250 to 570 min-1 Torque range: 3.0 to 12 Nm / 26.5 - 106 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Other tools for industrial production and maintenance on request.

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Podpfxjx Rqkus Al Nspu Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: used, functionality: fully functional, mileage: 862,150 km, first registration: 06/2015, fuel type: diesel, Road tractor, XLX cab, automatic transmission, retarder, fridge box Ppedpfjyxbztsx Al Neu

Condition: used, functionality: fully functional, mileage: 371,057 km, first registration: 03/2018, fuel type: diesel, Vehicle with NEW ENGINE, FRCX class refrigerated box 3m x 2m, CARRIER refrigeration unit, twin rear axle, rear access ladder to the box. Ppsdpfx Aloyxbx Es Nsu

Condition: new, Year of construction: 2026, An open-type industrial booth engineered for efficient air extraction and ventilation in professional and industrial environments. The unit features overall dimensions of 1269 × 1367 × 2379 mm and is equipped with an electric motor rated at 1.1 kW operating at 2800 rpm. Air movement is provided by a Ø315 mm impeller, delivering an airflow capacity of 2600 m³/h. The booth is designed for reliable continuous operation, ensuring stable airflow performance and effective extraction, making it suitable for industrial applications that require controlled ventilation and air handling. Ppedpfx Aljyghnno Nou

Condition: new, Sarmax CHEYENNE SP2 600 Brush Aging Machine Working width: 600 mm Maximum working height: 300 mm Transport belt with adjustable speed: 3–15 m/min Ppsdpfx Ajyf Dclsl Neu Includes: steel brush + tynex brush Total power: 9 kW Technical documentation CE certificate Brand new machine available on order

Condition: good (used), functionality: fully functional, We offer a miter saw with 4 cutting units. Detel saw Type CDM 2X2-6000 2 x 2 units of 2.2 kW each Disc diameter 180 mm Pneumatic clamps Milling cutter holder Waste conveyor belt Pedpfx Asxn Rlqsl Nspu Motor with brake Frequency-controlled motors

Condition: used, functionality: fully functional, ShowRange SRFD2600 Digital Ultrasonic Flaw Detector Set. The rugged SRFD2600 is designed for the severe environment. Its domestically unique omniseal design enables it to resist the damp, sandstorm, dust, and pollution in all sorts of environmental extremes ranging from ocean to desert. The full screen function enables the echo wave displaying area to cover the entire screen so that the operator will have the maximal view. The solid waveform :add the waveform visual contrast and omission will hardly happen during the fast testing. The bulk memory can store up to 1000 data sets,including waveforms, curves,and parameters(including the traditional 1000 channels) Ppodpfx Ajttrc Asl Nou Through echo wave-echo wave thickness measurement:the zero calibration can be avoided, and the net thickness of the base material can be directly measured through the coating. Wave Crest Memory: the real-time envelope can display the highest wave of the flaw and record the maximum value of the flaw to help the exact positioning and fast testing of the flaw as well as the qualitative analysis by the envelope waveform. Automatic Gain: automatically adjust the gain to the pre-set amplitude height. Warning Function: afferent echo/lost wave alarm Real-time Clock: automatically record the date and time of the stored waveform. Display Freeze: catching the waveform and the sound path data at any moment and removing the hatch after freezing to measure the echo wave parameters. Flaw Positioning: real time displaying sound path S, horizontal height X, depthY, and wave height H. Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2014, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle speed (max.): 3,500 rpm, quill diameter: 78 mm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Pedpfxjykikxe Al Nspu Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Ppsdpfxey D E Rij Al Neu Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: used, Year of construction: 2017, ABB further extends its mid range robot family. The IRB 2600 is the second model in the sharp generation range with enhanced and new capabilities. It is a compact robot with a high payload capacity. The design has been optimized for targeted applications like arc welding, material handling and machine tending. The IRB 2600 is available in three variants, with options for floor, wall, shelf, tilted or inverted mounting configurations. IRB 2600-20/1.65 Reach (m): 1.65 Ppjdpoy Echbjfx Al Nou Payload (kg): 20

Condition: good (used), Year of construction: 2018, operating hours: 1,175 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, empty load weight: 1,600 kg, mileage: 1,175 km, Electric triplex stacker Ppedpfxsx S Nifs Al Nju Brand: Still (Germany) Year of manufacture: 2018 ONLY: 1,175 hours Capacity: 1,400 kg Lift height: 5,016 mm Overall height: 2,165 mm Option: FREELIFT Battery: 2017 with external charger Automatic filling system Watch the video on YouTube

Condition: good (used), Pásový dopravník, PD 10 1x230 V, 4,5A, 50Hz, motor 180W Psdpfx Alszf Hfbe Njpu length 2600mm width 50mm

Condition: used, Used Sielmann approximately 25,000 litre 304 stainless steel vertical storage vessel. Unit measures approximately 2,600mm diameter x 4,700mm straight side. Unit has welded dished top and bottom heads. Unit includes stainless steel internal heating coil. Unit is mounted on 4 legs. Ppsdsygvlzjpfx Al Nsu Specifications: Capacity: 6,604.3 gal Diameter: 8.53' Height: 15.42' Type of stainless: 304 Type Of Heads: welded dished top and bottom Vertical/Horizontal: vertical Legs/Lugs/Skirt: 4 legs

Condition: new, Year of construction: 2026, machine/vehicle number: Cone G25_2, functionality: fully functional, Electric press brake G25 with spindle drive CoastOne - Made in Finland New machine Pressing force: 104t Bending length: 2600mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers Podsy A Nkwjpfx Al Nopu 36 months warranty after installation

Condition: new, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 202104053, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Senfeng, controller model: RDC6442G, laser type: CO₂ laser, laser source manufacturer: Senfeng, laser source model: SF1326, laser power: 150 W, laser wavelength: 10,600 nm, working length: 2,600 mm, working width: 1,300 mm, working height: 200 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 200 mm, cutting speed: 10,000 mm/min, positioning speed: 60,000 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, SENFENG SF1326 INDUSTRIAL CO2 LASER CUTTING MACHINE Manufacturer: Senfeng Model: SF1326 Year: 2021 Condition: Excellent, fully operational Technical specifications: Working area: 1300 × 2600 mm CO2 laser tube, 150W CNC control system Water cooling system CE certified Positioning accuracy: ±0.05 mm Cutting speed: up to 10,000 mm/min Ppedpfozdci Iox Al Neu Positioning speed: up to 60,000 mm/min * Power supply: AC 380V, 50Hz, 3-phase Suitable materials: Acrylic Plastics MDF Plywood Wood Rubber Leather Textiles Bamboo Composite materials Features: Emergency stop Smoke extraction system Cooling unit Documentation included Tested and ready for production The machine is available immediately and can be inspected while powered on.

Condition: like new (used), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle speed (max.): 6,000 rpm, travel distance Z-axis: 330 mm, spindle motor power: 15,000 W, rotational speed (max.): 6,000 rpm, overall weight: 3,200 kg, swing diameter over bed slide: 600 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, We are offering this as-new DN Solutions Lynx 2100 CNC lathe Lynx 2100 GT2100 GT2600, year of manufacture 2026. Listing Title: DN Solutions (Doosan) Lynx 2100 – As-new condition (only 50 operating hours!) Description: We are offering a DN Solutions (Doosan) Lynx 2100 CNC lathe in as-new condition. The machine was purchased for a specific project and has seen minimal use. It is currently in showroom-like condition with less than 50 operating hours. Condition: As-new, no signs of wear, fully functional Availability: Immediately available Key advantage: Avoid long delivery times and secure a machine in new-machine quality right away. Technical Data: Control: Fanuc i-Series Swing diameter over bed: 600 mm Maximum turning diameter: 350 mm Maximum turning length: 330 mm Ppjdpfx Alsyzbdgj Nsu Bar capacity: 51 mm / 65 mm Spindle speed: 6,000 rpm Number of tool stations: 12 Main drive power: 15 kW Machine weight: approx. 3,200 kg If you have any questions or need further information, feel free to send us a message or call us.