Used Edge Trim 62 Rolls for sale (14,272)

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Kdsdpfxjy Ruzqo Aqgel

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V Kjdpfxey Ez A Ro Aqgjdl total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Kdedpfx Aqjwkaalegjl Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2019, machine/vehicle number: MR002728, Used: edge banding machine for applying edge band and solid strips up to a thickness of 5mm. Equipped with a combined milling unit for longitudinal and cross edges. Kdsdpfx Aqoy I Rf Hogel Machine features include pre-milling unit, end trimming operations, and an additional glue pot. The machine comes with the following options: - Radius scraper unit - Brush unit - Glue scraper unit - Quick-change system for glue tank - Spare glue tank Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 3 mm - Maximum strip thickness: 5 mm - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Minimum panel length: 120 mm - Minimum panel width: 110 mm - Exchangeable glue pot: Yes - Feed speed: 7 m/min - Glue tank capacity: 0.8 kg - Pre-milling unit present: Yes - Pre-milling tool diameter: 80 mm - Pre-milling tool height: 56 mm - End trimming unit: HM saw blade - End trimming unit saw blade diameter: 125 mm - End trimming unit speed: 12,000 rpm - Radius and straight milling unit: Yes - Milling tool diameter: 58 mm - Milling unit speed: 12,000 rpm - Radius scraper unit: Yes - Glue scraper unit: Yes - Anti-adhesion spray unit: Yes - Brush unit: Yes - Cleaning spray unit: Yes - Serial number: KK00006654

Condition: new, mileage: 200 km, power: 355 kW (482.67 HP), fuel type: diesel, overall weight: 26,000 kg, gearing type: automatic, emission class: euro6, Equipment: soot filter, * 1 Lane change warning system * 1 -----Color/Paint----- 1 Chassis color: Anthracite Gray * 1 Cab color: E1980 Crystal White * 1 Color of headlight surround: Crystal White * 1 Color of bumper: Crystal White * 1 Lower cab step: Gray * 1 Mirror housing, black, for cab color Crystal White * 1 -----Tires/Wheels----- 1 Wheel trims, silver-gray * 1 Goodyear * 1 Tire pressure monitoring system * 1 Front axle(s): 315/70 R22.5 * 1 Driven rear axle(s): 315/70 R22.5 * 1 2nd driven rear/tag axle: 315/70 R22.5 * 1 Steel disc wheels, silver-gray * 1 -----Equipment/Special Equipment----- 1 Off-road application * 1 Maneuvering mode * 1 Emission class Euro 6 * 1 ECO mode * 1 Idle shutdown, 5 minutes * 1 Automated transmission, TraXon, 12 gears * 1 Automated transmission with manual shift, full version * 1 Rear axle ratio 2.69 * 1 Mechanical differential lock * 1 Traction control system (TCS) * 1 OBD-E engine H6, fuel type B7 * 1 Traction aid 15.0 t * 1 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 * 1 MX-13 engine, 355 kW/483 hp, cab emblem: 480 * 1 Left-hand drive * 1 Steering wheel, leather * 1 Sunroof with electric operation * 1 Driver's seat: Super Air * 1 Co-driver's seat: Cinema & table, fabric upholstery * 1 Driver's seat, fixed pedestal * 1 Door panel: Loosely woven fabric * 1 Interior trim color: Luxury * 1 Cab, interior trim: Hexagon * 1 Cab wall panel, textile * 1 Co-driver's seat, fixed pedestal * 1 Roller blind, co-driver side * 1 Xtra Comfort mattress for lower sleeper berth * 1 Automatic temperature control and air conditioning * 1 Protective net on lower sleeper berth * 1 Curtains, without partition curtain * 1 Refrigerator and drawer * 1 Armrests on both sides of the driver's seat * 1 Armrests on both sides of the co-driver's seat * 1 Center storage compartment * 1 Roller blind, driver side * 1 Dashboard table * 1 Dashboard design: Vision * 1 Auxiliary power supply: Standard + 2x 40 A * 1 LED interior lighting * 1 ECAS remote control with extended functions * 1 Stand-by and engine heater, waste heat pump, and timer * 1 Wheelbase 4.80 m / rear overhang 2.70 m * 1 Front underrun protection * 1 Rear fender * 1 Standard component arrangement * 1 Single-circuit steering * 1 Steering with Euro certification * 1 Splash guard * 1 Preparation for work lights, rear * 1 Steel air reservoir * 1 Fuel tank, left * 1 Exhaust pipe, right * 1 Rear light housing with license plate holder * 1 Rear lights with incandescent lamps * 1 Exhaust pipe, horizontal, low * 1 EAS unit, right, horizontal, + 45-liter additional tank, left * 1 Longitudinal member 310/7.0 mm, with internal reinforcement, front/rear * 1 620-liter aluminum fuel tank, left, height 620 mm * 1 Application class 0 * 1 Standard noise level * 1 Maximum ambient temperature 38 degrees * 1 Additional cab insulation * 1 Air intake, front * 1 Dust protection shield * 1 Integrated heated fuel filter Kjdpfxoy Tgqve Aqgodl * 1 Standard hole pattern for body mounting * 1 Standard chassis preparation * 1 Plug-and-play application connector * 1 CAN J1939 functions in the body connector * 1 Application connector for BB remote control * 1 ECAS control unit * 1 Additional connector, lights, chassis * 1 Application with drawbar, nameplate, up to max. permissible gross weight * 1 Pneumatic connection for trailer, swivel coupling * 1 Cross member D137 + Ringfeder coupling D137 B * 1 Electrical connection for trailer, 24 V/15-pole

Condition: used, mileage: 23,000 km, power: 375 kW (509.86 HP), first registration: 01/2025, fuel type: diesel, overall weight: 18,000 kg, color: orange, gearing type: automatic, Equipment: air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * 1 NAVIGATION SYSTEM * 1 AIR CONDITIONING SYSTEM * 1 We also offer financing/leasing and rental options! * 1 LA1 2603 TIE ROD * 1 LA2 2603 TIE ROD * 1 LZ2 ORNAMENTAL GRILLE, PAINTED * 1 -----CHASSIS DESIGN----- 1 V1B AROCS * 1 V1W STANDARD * 1 C2R WHEELBASE 4800 MM * 1 -----AXLE LOAD DISTRIBUTION----- 1 W2X WEIGHT VARIANT 26.0 T (8.0/11.5/7.5) * 1 M3D ENGINE OM471, R6, 12.8 L, 375 KW (510 HP), 2500 NM * 1 3RD GENERATION ENGINE OM471 * 1 ENGINE DESIGN EURO VI, E * 1 AIR INTAKE, CABIN SIDE WALL, MOUNTED * 1 WATER PUMP, REGULATED * 1 INSECT SCREEN, IN FRONT OF RADIATOR * 1 HIGH PERFORMANCE ENGINE BRAKE * 1 AIR COMPRESSOR, 2 CYLINDERS * 1 -----CLUTCH & TRANSMISSION----- 1 SINGLE-PLATE CLUTCH * 1 TRANSMISSION OIL COOLER * 1 TRANSMISSION MOUNT, DESIGNED FOR EASY REPAIR * 1 MERCEDES POWERSHIFT 3 * 1 POWERSHIFT ADVANCED * 1 DRIVING PROGRAM OFFROAD * 1 AUXILIARY DRIVE, SINGLE * 1 AUXILIARY DRIVE PUMP, UNDER FRAME UPPER EDGE * 1 -----AXLES & SUSPENSION----- 1 FRONT AXLE, STRAIGHT DESIGN * 1 FRONT AXLE 8.0 T * 1 REAR AXLE, BULL GEAR 485, HYPOID, 13.0 T * 1 TRAILING AXLE, 7.5 T, STEERABLE, RELIEVABLE, LIFTABLE * 1 AXLE RATIO I = 2.929 * 1 FRONT SPRING 8.0 T, 3-LEAF * 1 FRAME LOWERING, WITHOUT BAG-REST PRESSURE CONTROL * 1 STABILIZER BAR, FRONT AXLE * 1 ADDITIONAL STABILIZER BAR, REAR/TRAILING AXLE * 1 AXLE LOAD MEASURING DEVICE * 1 PROTECTIVE PLATE FOR HAD HIGH-PRESSURE LINES * 1 HYDRAULIC AUXILIARY DRIVE (HAD) * 1 -----WHEELS & TIRES----- 1 STEP SHOULDER RIMS 11.75 X 22.5, FRONT AXLE * 1 STEP SHOULDER RIMS 9.00 X 22.5 * 1 STEP SHOULDER RIMS 11.75 X 22.5, REAR AXLE * 1 TIRE SPECIFICATION, CUSTOMER REQUEST, FRONT AXLE * 1 TIRE SPECIFICATION, CUSTOMER REQUEST, FRONT/TRAILING AXLE * 1 TIRE SPECIFICATION, CUSTOMER REQUEST, REAR AXLE * 1 WHEEL NUT COVER * 1 TIRE PRESSURE MONITORING * 1 W48KHA 90 2 X 385/65 R 22.5 TL REGIO RR STEERING ?K? * 1 F18LIA 90 4 X 315/80 R 22.5 TL REGIO RR DRIVE ?L? * 1 W48KHA 90 2 X 385/65 R 22.5 TL REGIO RR STEERING ?K? * 1 -----FRAME & FRAME COMPONENTS----- 1 FRAME, SCREWED * 1 OMISSION OF MOUNTING PARTS, ON THE FRAME * 1 FRAME OVERHANG 1350 MM * 1 STEERING, SINGLE CIRCUIT * 1 STEERING ASSIST PUMP, REGULATED * 1 BATTERY CARRIER, BATTERIES SIDE BY SIDE * 1 MAIN TANK, LEFT * 1 TANK 510 L, LEFT, 650 X 700 X 1300 MM, ALUMINUM * 1 ADBLUE TANK 60 L, LEFT * 1 TANKS, LOCKABLE * 1 PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM * 1 TANK CROSS-SECTION, NARROW * 1 TANK CROSS-SECTION, HIGH * 1 EXHAUST SYSTEM, TAILPIPE TO THE RIGHT OUTSIDE * 1 EXHAUST BOX * 1 FENDER, FOR CHASSIS TRANSFER * 1 SPLASH GUARD (EC), FRONT * 1 FRONT UNDER RUN PROTECTION (ECE), ALUMINUM * 1 BUMPER, CORNERS MADE OF STEEL * 1 BUMPER, CENTER SECTION WITH TOWING EYE, COUPLING HEAD * 1 TRAILER COUPLING STANDARD, D40, ROCKINGER * 1 HAND LEVER, BELOW, FOR TRAILER COUPLING * 1 REAR CROSSMEMBER, REINFORCED * 1 DISC BRAKE, ON FRONT AND REAR AXLE Kodpov Sxfkefx Aqgodl * 1 ELECTRONIC BRAKING SYSTEM WITH ABS AND ASR * 1 HEATING, ELECTRONIC COMPRESSED AIR SUPPLY UNIT * 1 ELEC. COMPRESSED AIR SUPPLY & CONTROL, CENTER * 1 CONDENSATE MONITORING, FOR COMPRESSED AIR SYSTEM * 1 COMPRESSED AIR TANK, STEEL * 1 TRAILER BRAKE, 2-LINE, BRAKE CONNECTIONS LEFT * 1 TRAILER STABILITY CONTROL ASSISTANT (TSA) * 1 TRAILER BRAKE CONNECTION REAR, DUO-MATIC+STANDARD * 1 PARKING BRAKE, ELECTRONIC * 1 SECONDARY OIL RETARDER * 1 -----CAB EXTERIOR----- 1 L-CAB STREAMSPACE, 2.30 M, TUNNEL 170 MM * 1 FLOOR VERSION, TUNNEL 170 MM, FOR STORAGE COMPARTMENT LEFT * 1 CAB WIDTH 2.30 M * 1 CAB, 600 MM MOUNTING HEIGHT * 1 STREAMSP

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,8 / 3 Panels thickness (min/max) mm 10 / 50 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 1 x 75.186 (1 x Kw 4,5) + 2 x 08.378 (2 x Kw 4,5) adj. by N.C. Glueing Unit (Thermofusion with Laser) IMA Laser System LASERLINE (year 2025) Band Pressure zone + Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) 08.42/30/B (Kw 0,66 x 2) work speed 20 + 30 m/min (0°-25°) Spraying Unit (for anti-release liquid) Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustable for 4 profiles) 08.0587 HS/LS1 (Kw 0,66 x 1) Kedpfjy Spcljx Aqgodl Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Milling grooving unit, N.C. adjustable Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) RIEPE (for PMMA too) OPTION:No. 1 Automatic Return System "GELDMEIER" (Sofit's Code O11043)

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: - Guide rail - wrenches, open-end wrenches Kdodpfxjbhfzbo Aqgol - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions

Condition: new, Deburring machine brand: Aboagye Model: AF 165 Kdjdpfxodurxne Aqgol Condition: new machine Speed: 2,800 RPM maximum cutting width: 1 mm equipped as standard with: -Special flap disc K80-ST -Suction nozzle -Manual

Condition: used, With swiveling heating rail Kdjdpoy N Dinefx Aqgjl

Condition: used, mileage: 702,700 km, power: 353 kW (479.95 HP), first registration: 02/2013, fuel type: diesel, empty load weight: 11,655 kg, overall weight: 26,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 6x4, wheelbase: 4,200 mm, next inspection (TÜV): 02/2027, fuel: diesel, color: orange, gearing type: mechanical, emission class: euro5, suspension: steel-air, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, traction control, trailer coupling, Urea tank (AdBlue) Engine displacement: 12,419 cc All-wheel drive 50 mm trailer coupling Hydraulics (auxiliary drive) Low-noise Alloy wheels Auxiliary air conditioning Euro EEV 1 emission standard Kdjdpfxey Tvamo Aqgol Payload: 14,345 kg Retarder Automatic climate control Meiller RK 20.62 tipper Underrun protection, mechanically extendable Sun visor Rotating beacons Air horns Driver's cab with air suspension 1 bed Errors and omissions excepted

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. Kedpfxowkba Ts Aqgodl The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: Ksdpfowka S Iox Aqgjdl - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Ksdpfjwka H Sox Aqgsdl Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm Kjdpfx Aqjwkbcbsgedl - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: used, mileage: 282,100 km, power: 188 kW (255.61 HP), first registration: 09/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2025, color: white, gearing type: mechanical, emission class: euro5, * VDL hooklift truck with flatbed + tarpaulin and tail lift body * Radio * Air conditioning * 3-seater * Manual transmission * 2nd axle steered * Flatbed with tarpaulin body and tail lift, electric side curtain -----Internal vehicle number: 11365 + 11365a1 + 11365a2----Errors & intermediate sale excepted Kdsdpfey Nhlyox Aqgel WhatsApp support available! If you have questions about the vehicle or want further information, feel free to contact us conveniently via WhatsApp Whatsapp German, English -- Whatsapp German, English, Arabic

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING AGGREGATES. Technical Data: Working dimensions: + X-axis: 3,050 mm for single setup + X-axis: 900 mm for pendulum operation + Y-axis: Milling up to 1,220 mm with 25 mm tool diameter Edge banding up to 1,220 mm All aggregates up to 1,170 mm Workpiece thickness up to 60 mm with standard clamp 6 workpiece consoles for a tubeless vacuum system 4 workpiece stops in X-direction, integrated into the machine frame, for large workpieces 6 workpiece stops in the X-direction, one each integrated in the console 1 workpiece stop each on the left and right in the Y-direction 4 lifting rails for easy positioning of heavy workpieces LED positioning aid for easy placement of vacuum cups and consoles Aggregate equipment: Milling spindle 11 kW, HSK F63 Speed range 0 - 18,000 rpm Liquid cooling C-axis for use with processing units, with torque support and 3-point stabilization Kdjdoy Hrh Topfx Aqgsl 12-position tool changer magazine Drilling head with 17 vertical spindles Spindle pitch 32 mm Air nozzle for cleaning workpiece edges Exchangeable edge banding unit for 360-degree edgebanding work With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter aggregates: + Horizontal boring head in cross-head design + Lock case milling unit, 2 outlets + 90-degree sawing unit + Swiveling drilling/sawing unit + Combination unit for radius milling / scraper blade Control system: POWERCONTROL with: WOOD WOP AV license WOODWOP

Condition: used, mileage: 580,000 km, power: 375 kW (509.86 HP), first registration: 06/2010, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2025, brakes: retarder, color: black, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, loading space length: 7,000 mm, Year of construction: 2010, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Front axle load 8.0 t, driver's side airbag, trailer socket 15-pin + 7+7-pin, work lights, audio system: CD radio (Bluetooth incl. fixed telephone installation), 220 Ah battery, Bi-Xenon headlights, CB radio, comfort cockpit, aluminium air tanks, additional air tank, air horn(s) on cab roof, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane keeping assistant, cab interior: wood decor trim, cab with air suspension, rear axle H 8, crown wheel 485, interior lighting dimmable in blue, central locking system, fuel tank: 590 L aluminium, extendable cool box, 2-cylinder air compressor, MB 2C PTO, Voith retarder, acoustic reverse warning (external warning signal), electric sliding/lifting roof (glass), circuit breaker, seats in cab: driver's leather comfort seat, electric sunblind, 2-piece, telematics interface - Cotel, Telligent distance control, Telligent steered tag axle, transmission oil cooler. Additional equipment: Emission standard EURO 5, axle configuration: 6x2, trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, mirrors electrically adjustable and heated, wide-angle and heated mirrors left side, outside temperature display, rear axle differential lock, cab: Megaspace, suspension: leaf/air, electric windows, generator 80 A, interior filter: pollen filter, body/build: chassis, tag axle lifting system, model revision from 06/2008, engine 16.0 L - 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, single wheel tag axle, wheelbase 4800 mm, disc brakes, steel rims 9.00x22.5, Telligent shifting, Telligent brake system with ABS+ASR, CB radio preparation, telephone/fax preparation, cranked front axle, immobilizer, central locking including key, permissible gross weight 25.00 t Vehicle is sold WITHOUT SKIP CONTAINER!! Kdodjxd In Uopfx Aqgjl REPLACEMENT ENGINE with 39,000 km Gearbox overhauled 6,000 km ago Lift/steerable axle All tires 70-80% Leather comfort seat etc.

Condition: used, Writing desk, rolling desk, tiered trolley, logistics trolley, shelving trolley, transport trolley, platform trolley, workshop trolley FETRA Type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 mm Load capacity per shelf: 50 kg Total load capacity: 100 kg - Rolling desk made of steel tubing and profile steel - Bolted construction, powder-coated, blue RAL 5007 - Writing surface made of wood panel with edge stopper, inclined approx. 10° - 2 shelves, variably screw-in (can hold 2 folder heights) Kdodpfspflp Ejx Aqgsl - 4 swivel castors (Ø 125 mm) with plastic hub and rubber tread - 2 fixed castors with brakes Space requirements L x W x H: 600 x 600 x 1190 mm Net weight: 25 kg Very good, as-new condition 7 units available, price per unit

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" Kedpfsxya Hzsx Aqgjdl ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: used, mileage: 447,283 km, power: 294 kW (399.73 HP), first registration: 04/2016, fuel type: diesel, empty load weight: 11,700 kg, maximum load weight: 14,300 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, color: white, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,830 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, low noise, parking heater, traction control, trailer coupling, Meiller RK 2070 with remote control, rear steering axle, non-binding offer – subject to change and prior sale – sold without any warranty – all information provided without guarantee! Kedpfx Aqex Tug Esgedl

Condition: excellent (used), loading space volume: 54 m³, Year of construction: 2002, Hüffermann LL101s/Roll-off Container 54 cbm/5 UNITS AVAILABLE Kjdpswaap Ejfx Aqgedl • Manufacturer: Hüffermann • Model: LL101s • Year of manufacture: 2002 • Unladen weight: 3,900 kg • Permissible total weight: 15,000 kg • Nominal capacity: 54 cbm • Internal dimensions: 7.4 m x 2.42 m x 2.95 m • External dimensions: 7.52 m x 2.55 m x 3.185 m • Floor: 3 mm S235 steel sheet • Sides: 3 mm S235 steel sheet • Rear side: 3 mm S235 steel sheet • Doors: twin-leaf • External colour: RAL 1226

Condition: used, Year of construction: 1999, color: red, mileage: 1,001 km, first registration: 01/1999, gearing type: other, driver cabin: other, Vehicle location: incoming / in transit, steel body, doors Body: City roll-off container with double-wing doors, approx. 3.5 m³ upper container section Kdsdpfx Aoy Spxtjqgsl Year of manufacture unknown, as there is no data plate Internal length approx. 4,000 – 4,500 mm All information provided without guarantee, as the item is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, Year of construction: 1999, color: red, mileage: 1,001 km, first registration: 01/1999, gearing type: other, driver cabin: other, Vehicle location: in transit, steel body, doors. Body: City roll-off container with wing doors, approx. 7.5 m³, year of manufacture unknown due to missing identification plate. Internal length approx. 4,000 – 4,500 mm. All information provided without guarantee, as the vehicle is in transit! Equipment information without guarantee. Subject to changes, prior sale and errors! Ksdpfx Aey Spykjqgsdl

Condition: used, Year of construction: 1999, color: red, mileage: 1,001 km, first registration: 01/1999, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body, doors. Kdedpfxoy Spy Do Aqgol Body: City roll-off container/flatbed with foldable sideboards, year of manufacture unknown due to missing type plate. Internal length approx. 4,000 mm - 4,500 mm. All information provided without guarantee, as the vehicle is in transit! Equipment details are given without guarantee; changes, interim sale, and errors reserved!