Used Clansman Dynamics Foundry Manipulator for sale (1,125)

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW Pedpfx Amofg E H Uspepr weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 280 mm Podpfx Amofg E Iajpepr capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: good (used), Year of construction: 2013, operating hours: 37,297 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D sl, table width: 1,500 mm, table height: 30 mm, table length: 2,000 mm, table load: 2,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 12,486 h, spindle motor power: 24 W, number of slots in tool magazine: 21, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an EiMa CNC-controlled 5-axis machining center, type Sigma M, with a fixed portal and moving table, designed for the precise machining of aluminum and finishing of steel. The machine is engineered for high accuracy, rigidity, and large travel paths, making it ideal for demanding milling, drilling, and sawing operations in metal and aluminum profile applications. Year of manufacture: 2013 Power-on hours: approx. 37,297 h (as of November 2025) Spindle running time: approx. 12,486 h total (as of November 2025) AXIS TRAVEL & DYNAMICS: - X 3,400 mm · Y 2,300 mm · Z 1,000 mm - Feed rate: X/Y 60 m/min, Z 40 m/min STRUCTURE & TABLE: - Sturdy steel construction, precision linear guides, servo drives, automatic central lubrication - Moving table 2,000 × 1,500 mm, 30 mm thick, threaded grid 100 × 100 mm - Max. load capacity 2,000 kg SPINDLE & TOOL CHANGER: - 24 kW HSK 63 A spindle up to 18,000 rpm, water-cooled - Disc-type tool changer with 20 positions + 1 pick-up position (for tools up to Ø 500 mm) 5-AXIS HEAD: - C3 fork head, swiveling ranges approx. C ±200°, A ±120°, high positioning accuracy MEASURING SYSTEMS: - m&h wireless probe (workpiece measurement) - BLUM laser (tool measurement) EQUIPMENT: - MMS system (internal & external lubrication) - Fully enclosed cabin, separate tool change chamber - Mist extraction system with electrostatic separator (approx. 1,900 m³/h) already integrated Ppedpfx Ajx H Ib Nompor CONTROL: - Siemens 840D sl, 5-axis package, Advanced Surface, TCP - 15" control panel, remote maintenance prepared ACCURACY: - Repeatability approx. ±0.012 mm SPECIAL FEATURES: - Connected to power – demonstration possible at any time - Direct from production – no dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport possible (at extra cost) HIGHLIGHT: - New spare spindle from Omlat included (approx. €25,000 value) NOTE: - Collection possible from January/February onwards All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: used, mileage: 1 km, first registration: 10/2020, Equipment: crane, CRANE CONTAINER (4M70X2M48X0M80 INTERNAL DIMENSIONS), ALUMINUM FOLD-DOWN SIDE WALLS, STEEL FLOOR, QUICK-CHANGE SYSTEM, CRANE FASSI F185A.2.24 XE DYNAMIC, RADIO REMOTE CONTROL WITH ENGINE START/STOP, ROTATING HYDRAULIC OUTRIGGERS OPERABLE BY REMOTE, 5+6 CONTROL CIRCUITS WITH ROTARY SERVO, 4X HYDRAULICS AT 12M55/1100KG, BARELY USED. Ppedpoytrdaofx Amper VERY GOOD OVERALL CONDITION

Condition: used, mileage: 212,263 km, power: 346 kW (470.43 HP), first registration: 10/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, Short cab, sun visor, rotating beacons, 33-ton chassis, air-suspended rear axles, multifunction steering wheel, storage box, automatic transmission, 50 mm towing hitch, reversing camera, navigation system, air conditioning, ZF intarder, 3.90 m wheelbase, differential locks, rear crane hydraulics, AP axles, heavy-duty cooler, 12,000 kg unladen weight without crane container... Hook loader Marrel AL20S53 with sliding hook, hydraulic locking front and rear, hydraulic underrun protection, CE2020. Pjdpfxjx Upknj Ampepr Crane container (internal: 4.70m x 2.48m x 0.80m), foldable aluminium drop sides, steel floor, quick change system, crane Fassi F185A.2.24 XE Dynamic, radio remote control with engine start/stop, rotatable hydraulic outriggers operated by remote, 5+6 control circuits with slewing servo, 4x hydraulics at 12.55m/1100kg, hardly used. Very good overall condition.

Condition: used, mileage: 134,377 km, power: 90 kW (122.37 HP), first registration: 08/2019, fuel type: diesel, overall weight: 2,375 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,878 mm, total width: 1,793 mm, total height: 1,886 mm, loading space length: 2,360 mm, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Errors and prior sale reserved! Internal number: 0815. X122386 ----EQUIPMENT Acoustic package, App-Connect, Composition Media audio system (touchscreen, radio/CD player, MP3, Bluetooth), Equipment package: Light & Vision, Bi-xenon headlights with dynamic cornering light, front rubber flooring, rear parking assist incl. rear-view camera, driver assistance system: area monitoring system (Front Assist) with City Emergency Braking, two folding remote keys, glazed rear tailgate, heated rear window, interior LED lighting in cargo/passenger compartment, high partition wall in cargo area with window, partial leather trim (gear shift/selector lever and handbrake lever in leather), lumbar support front left seat, pearlescent paint, digital radio reception (DAB+), heated windscreen washer nozzles, left sliding door, fixed side window in cargo/passenger compartment front right, front seat heating, 12V socket in luggage/cargo area, auxiliary heater with timer and remote control, 3rd brake light, passenger-side airbag, driver-side airbag, traction control (ASR), BlueMotion Technology package, left aspherical exterior mirror, right convex exterior mirror, commercial vehicle mirror version, BlueMotion Technology, brake assist, comfort roof lining front, roof rail/carrier preparation, electronic differential lock (EDS), hill start assist, multi-collision brake, driver fatigue detection, tinted laminated windscreen, interior filter: dust and pollen filter, body/construction: panel van, black radiator grille with lower chrome strip, steering column (steering wheel) mechanically adjustable, height/length adjustment, truck registration, engine 2.0 L - 90 kW TDI, engine drag torque control (MSR), Multi-Function Display Plus, non-smoker package, standard payload, wheelbase 3006 mm, tire repair kit (Tire Mobility Set), low emission according to Euro 6 emissions standard, right sliding door, SCR system (AdBlue technology), front side airbag with head airbag unit, side protection strips, front seatbelts with pretensioners, height-adjustable, driver’s seat height-adjustable, front right seat, seat cover/upholstery: fabric, steel wheels 6x15, start/stop system, front seatbelt warning system, heat-insulating green-tinted glazing, bi-xenon headlights for low and high beam with LED daytime running lights, front seat heating... and much more. Ppsdpfoy Hzglex Ampsr ----The vehicle is unprepared! Nationwide delivery available at extra cost. Errors and prior sale reserved. We are happy to accept your vehicle as a trade-in. Financing/leasing possible even without down payment! If you have any questions, we are pleased to advise you!

Condition: new, Year of construction: 2025, functionality: fully functional, Pressure: 125 t Bending length: 3000 mm Frame width: 3100 mm Control unit: Cybelec VisiTouch 24MX Stroke: 300 mm Installation height: 500 mm Rapid traverse down: 200 mm/s Bending speed: 0–12 mm/s Ppodpfjx Sq Hljx Amper Total power requirement: 15 kW Machine weight approx.: 11,500 kg Dimensions: 4080 x 3110 x 1800 mm Standard equipment: Basic configuration: - CNC control Cybelec CybTouch 15 - Axes: Y1–Y2–X–R - Fully dynamic crowning system - System for compensating frame deflection – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display at the press beam for visualizing positioning of the backgauge - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliant - Upper and lower tool clamping PROMECAM system, mechanical

Condition: new, Year of construction: 2026, functionality: fully functional, Pressure 250 t Bending length 3100 mm Frame gap 2600 mm Control Cybelec VisiTouch 24 Stroke 300 mm Throat depth 500 mm Installation height 500 mm Rapid approach (down) 175 mm/s Bending speed 0-12 mm/s Total power requirement 22 kW Ppodpfoylwm Rox Ampjr Machine weight approx. 13,000 kg Dimensions 3900 x 2150 x 3360 mm Standard equipment: Basic features: - CNC control Cybelec Visitouch 24 - 6+1 axes: Y1-Y2-X-R-Z1-Z2 +V - Automated dynamic hydraulic crowning system: G-CS - Frame deflection compensation system – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display on the ram for visualizing the backgauge positioning - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliance - Upper and lower tool clamping with PROMECAM mechanical system

Condition: excellent (used), functionality: fully functional, Pressure: 130 t Bending length: 3150 mm Distance between uprights: 2600 mm Motor power: 15 kW Control: CYBELEC VisiTouch Machine weight approx.: 10,900 kg Space requirement approx.: 3990x1750x2900 mm Podpoyvh Dvjfx Ampjpr Equipment: - Controlled axes: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic hydraulic crowning

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Podpfx Amjvvi N Ijpjpr

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Podpfxjvvi Sco Ampjpr

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,118 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 300 mm, table load: 790 kg, overall weight: 40,000 kg, number of axes: 5, This 5-axis Bystronic Byjet L 2030 was manufactured in 2004. It features a maximum cutting speed of 30 m/min and a maximum material thickness of 200 mm. The machine has a substantial workpiece weight capacity of 4,740 kg and a load capacity on the cutting grate of 790 kg/m². If you are looking to get high-quality waterjet cutting capabilities, consider the Bystronic Byjet L 2030 machine we have for sale. Contact us for further details. • Machine Tolerance (VDI 3441): ±0.05 mm/m • Repetition Tolerance: ±0.025 mm/m • Max. Simultaneous X/Y Positioning Speed: 56 m/min • Max. Cutting Speed: 30 m/min • Max. Material Thickness (loadable): 200 mm • Max. Workpiece Weight (flat part): 4,740 kg • Cassette Size (with integrated grate): 2000 x 3000 mm • Grate Slat Load Capacity (standard): 250 kg • Machine Weight (with options/aggregates): 11,300 kg • Machine Weight (fully loaded with steel): 40,100 kg • CNC Rotary Axis: Max pipe length 1700 mm, max diameter 200 mm (with centers) / 500 mm (with custom jaws), max weight 500 kg • Drilling Axis: Max diameter 3 mm, max depth 70 mm, speed 2600 U/min • Pump Type: Bypump 50 APC • Max. Dynamic Pressure: 3800 bar • Connected Load (Total): 61 KVA • Input Voltage: 3 x 400 V, 50/60 Hz • Operating Hours: 18,118.3 hours Additional equipment • Lifting Yoke Max. Load (single cassette): 4,500 kg • Cooling Unit: WKL 140 S3 Psdpfx Asy Duytempspr

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Pedpfsxhgfgsx Ampjpr Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, Demmeler Ergonomix M-2000 Perforated Plate, original 1.0m, diagonal 1.1m, 28mm holes Almost unused, like new, top condition Thanks to the ingenious arrangement of the entire mechanism, the developers at Demmeler have succeeded in creating an unbeatable large working area while maintaining a compact footprint for the Demmeler Ergonomix®M manipulator. The manipulator always brings maximum loads into the ideal position. A special feature of the Demmeler Ergonomix®M product family is the wide swivel range of up to 180°. This provides a decisive advantage for many workpieces, allowing them to be fully machined in one clamping setup without the need for additional repositioning. Payload 2000 kg Model M2000 A = min 490 mm B = max 970 mm C = max 1480 mm D = max 1000 mm Torque 1250 Nm Tilt Angle 180° Tilting Moment 8000 Nm Ppodpfx Amey Hl N Dopjr

Condition: excellent (used), mileage: 254,322 km, power: 353 kW (479.95 HP), first registration: 06/2018, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: crane, differential lock, = Additional options and accessories = - PTO = Remarks = XLRADM4300G206836 = More information = Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Differential lock Weights Empty weight: 16.250 kg Carrying capacity: 22.250 kg GVW: 38.500 kg Functional Crane: FASSI F165.A Make of bodywork: FASSI F165A.2.23 E DYNAMIC Condition Ppsdpsymp Agjfx Ampor Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, maximum load weight: 30,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2017, next inspection (TÜV): 07/2026, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, Equipment: Air suspension Safety: ABS * EBS * Disc brakes * Refrigeration unit Schmitz S.KO Coll with EXECUTIVE Package S.CU 1.0, * Maintenance newly performed in October 2025 Ppedoy Hy Rvepfx Ampsr * Operating hours: * 36-pallet box * Lift axle * Double-deck with beams * Dynamic Ramp * Temperature printer

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550) Ppsdpfjx D Rlpjx Ampor

Condition: excellent (used), Year of construction: 2002, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator Ppsdpsy H H U Isfx Amper All technical data for the individual systems can be found in the attached pictures.

Condition: good (used), Year of construction: 1997, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine Ppsdpfx Amjy H H Twsper - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Stationary, oil-free, high-performance reciprocating compressor used for the stretch blow molding process of PET bottles. Complete with anti-vibration mounts (no dynamic load), electric motor, V-belt drive, intercooler, separator, aftercooler, pulsation damper, and a 40 bar galvanized air receiver (500L) with electronic drains. High-pressure reciprocating compressor Manufacturer: AF Kompressoren Model: CE 46B Podeyttaiepfx Ampopr Year of manufacture: 2013 Nominal capacity: 1320 m3/h Pressure: 40 bar Power: 250 kW 3 x 400V/50Hz The compressor comes from our PET bottle production line (Plama-Pet), which we discontinued in 2017 to focus on preform manufacturing. The compressor is in good condition. The original purchase price was €168,000 and it comes from ongoing production. Please refer to the PDF file for further technical details.

Condition: used, mileage: 116,990 km, power: 552 kW (750.51 HP), first registration: 10/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: black, gearing type: automatic, loading space length: 6,800 mm, Year of construction: 2021, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Short timber stake body built by manufacturer PAVIC, Lemgo, equipped with 4 pairs of OptiPa SL steel bolsters with 8 aluminum stakes, 3 pairs of OptiPa end protection bars, usable loading length approx. 6,800 mm. Delivered separately: TAJFUN Type L 150 Z 96 rear-mounted cabin crane with TAJFUN Type GO ? 0053 X wood grapple including rotation servo, lifting capacity at approx. 9.60 m / 1,430 kg. High, reinforced bulkhead behind the driver's cab. Long-distance cab Globetrotter L2H2 with 1 berth, VOLVO ENGINE BRAKE+ with compact retarder, gearbox-mounted at rear, automatic climate control with sun sensor, auxiliary heater, external sun visor, electric roof hatch, tinted windows, air-suspended comfort driver’s seat, heated and ventilated, Raven/Coral leather upholstery for both driver and co-driver seats, 2 armrests each for driver and co-driver, dual electric window lifts, electrically adjustable and heated mirrors, side sunblinds for driver and co-driver, ABS, ESP, disc brakes with EBS, lane departure warning with steering assistance, lane change support, Volvo Dynamic Steering (VDS), adaptive cruise control (ACC) with collision warning and emergency brake function, cruise control (incl. brake cruise), I-Shift ATO 3512 F automated 12-speed gearbox with overdrive, gear lever on seat, 540 l aluminum diesel tank right side, 68 l AdBlue tank, digital tachograph, LED headlights, LED fog lights, LED daytime running lights "V-light," LED rear lights, various LED work lights, LightFix roof bar with 4 additional lights and 2 amber beacons, air horns on cabin roof, 33 l fridge with freezer compartment under the berth, FM/AM radio with Bluetooth phone connectivity, telematics gateway with 3G and WiFi, High instruments: digital 12'' driver info display, traffic sign recognition, etc., second driver info display, 9-inch color touchscreen, navigation, driver alert system (fatigue warning), multifunction leather steering wheel, lower berth with pocket spring mattress (hard), rear/top storage compartments 245 l, lockable front flap, central locking with remote, external storage compartments left and right, stainless steel toolbox left side, various work lights on loading crane, rear and beneath platform, towing jaw coupling with twin-line brake system, ALCOA Dura Bright high-polish alloy wheels, front and rear air suspension with lift and lowering function, differential locks at rear axle, GVW 26,000 kg / payload 9,145 kg (technically possible GVW 29,000 kg), wheelbase 4,600 mm, first owner, regularly serviced, very good overall condition, Euro 6E engine, low noise emission. Optional for an extra charge: PAVIC Type HTA 20 2-axle timber stakes trailer with bolsters, stake bed, 4x OptiPa SL steel bolsters with 8 aluminum stakes, 3 pairs OptiPa end protection bars, Y-style drawbar approx. 1,900 mm, front holding cable, various lashing points on frame, side underrun protection on both sides, SAF Off-Road axles 2x 10,000 kg air suspended, ABS, disc brakes with EBS, WABCO braking system with WABCO “SmartBoard” control box for air suspension, load pressure gauge, odometer, etc., LED area lighting and LED rear lamps, tires 275/70 R 22.5 // 8x on ALCOA Dura Bright high-polish alloy wheels, technically possible gross weight 22,000 kg, unladen weight 3,430 kg, first owner, German vehicle, very good overall condition, not a rental vehicle. Net offer price trailer €16,850 plus 19% VAT. Ppodpfoy Hd R Tsx Ampor

Condition: new, empty load weight: 9,039 kg, maximum load weight: 29,961 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2026, Equipment: ABS, Unladen weight: 9,039 kg, permissible total weight: 39,000 kg, cargo space (L x W x H): 13,403 mm x 2,490 mm x 2,650 mm, tire size: 385/65 R22.5, cargo volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride guard, front lift axle, pallet box, electronic brake system (EBS), spare wheel carrier (2x), bolted chassis, portal doors, ISO bulkhead without fan, temperature recorder, connector 1x15 and 2x7 pin, antispray, international customs seal, telematics system, tire pressure monitoring, dynamic ramp protection (DRP), multi-function floor. You can find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer you individual financing options as well as full-service and telematics solutions. We are happy to advise you. Psdpfx Aey Er N Usmpjpr

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE morbidelli x200 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with a comprehensive range of drilling and milling tools to meet any requirements in the processing of wood and similar materials. Highlights: • Powerful, featuring drilling spindles with 8,000 RPM and advanced technology – the most robust spindle available on the market, offering over 1,000 hours of maintenance-free operation • Better and more extensively equipped, with a multifunction table that allows for various configuration options, ensuring optimal setup according to your needs • Easier and more intuitive programming thanks to the integrated Cad-Cam module 'MAESTRO CNC' • User-friendly operation: the work table is accessible at all times, and both control cabinet and vacuum pump are integrated. In the PRO SPACE configuration, there are no safety barriers required Construction: The supporting structure consists of an exceptionally robust monolithic steel base, heavily ribbed and very rigid; its particularly wide support surface is specifically designed to ensure the machine’s stability, providing sustained precision regardless of working conditions, without the need for floor anchoring. The base provides a large, solid foundation for the moveable gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of withstanding the highest demands, resulting in superior performance quality and greater accuracy. The movable portal is formed from a solid single piece, anchored to both sides of the base and running on high-quality prismatic guides with recirculating ball carriages. Dual drive motors on the X-axis ensure top performance even under heavy-duty conditions. Movement along the lower movable unit (X-axis) and along the gantry (Y-axis) is achieved via helical rack and pinion transmission. This enables higher tooth-by-tooth thrust, greater acceleration, and increased velocity along the X and Y axes. The specially designed helical gearing ensures lower wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, providing perfect balance under dynamic load as well as allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, guaranteeing top-quality finishing since potential vibrations are fully eliminated. Movement along the X-Y-Z axes is accomplished with brushless motors powered by digital inverters, offering: Ppjdpfx Asywvldempsr - Reduced processing times due to improved acceleration - Enhanced positioning accuracy with high-resolution encoders - No need for setup referencing upon startup thanks to absolute encoders - Practically no general maintenance required due to the brushless system, as there are no brushes Axis movement and general machine operating elements are managed by an industrial NS module with digital data transmission.

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 645 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 3,400 mm, total length: 4,430 mm, total width: 2,910 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, LAGUN L 5AX-500 5-Axis Simultaneous Machining Center – Immediately Available The LAGUN L 5AX 500 machining center stands for high precision, robust construction, and cost-effective manufacturing. Ideal for single-part production as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Financing / leasing options available ✔ Compact design with high stability ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and durable machine concepts. The machining centers impress with reliability, easy maintenance, and low operating costs. Technical specifications: Control system: HEIDENHAIN TNC 7 CNC control + 16" TFT screen HEIDENHAIN motors, linear scales, and electronic handwheel HR 510 Chip disposal: Chip conveyor Enclosure: Full enclosure with side-opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany Ppodsfdxhaopfx Amper ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a tailor-made quotation.

Condition: used, Year of construction: 2004, operating hours: 145,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems Ppodpfx Aey Ehdbompjr - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!