Used Cambio Cambio 70 for sale (12,582)

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate Lhjdpfx Afsziiw Iskjk 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Panel: "Touch Panel" All control and operating commands can be initiated on the "Touch Panel" control panel by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard: R1: 125 mm diameter L1: 85 mm diameter Volume: 335 liters Test chamber dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Data for temperature tests: Minimum temperature: -72°C Maximum temperature: +180°C Temperature deviation, over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Ledpfx Afsziiwuokjhk Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A, Rated power: 4.9 kW Fuse: 16 A slow-blow (to be provided by the customer) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 800 mm, Travel (Axes) X Axis (mm): 850 Y Axis (mm): 500 Z Axis (mm): 550 Table Table dimensions (mm): 850 x 500 Max load capacity (kg): 350 Pallet change time (seconds): 12 Spindle Spindle speed (rpm): 12,000 Spindle taper: No. 40 Feed Rates Rapid traverse X/Y/Z (m/min): 36/36/36 Cutting feed rate (mm/min): 1–20,000 Tool Change System Tool holder: BT-40 Pull stud: 90° Tool magazine capacity: 32 positions Lhsdpfoy Ayk Ujx Afkok Max. tool diameter with adjacent tools (mm): 75 Max. tool diameter without adjacent tools (mm): 150 Max. tool length (mm): 200 Max. tool weight (kg): 7 Tool-to-tool change time (sec): 1.5 Power Spindle motor power (kW): 11/15 Dimensions Installation footprint (mm): 3500 x 2300 x 2500 Net machine weight (kg): 6,700 MT 800P CONFIGURATION - CE conformity declaration - Fanuc 0iMD - Main transformer 380-200V/50Hz - 11/15 kW spindle motor - Spindle speed 10,000 rpm, DIRECT DRIVE - High-pressure coolant system, 20 Bar - Spindle chiller - Upgraded roller guideways - BT 40 - 32-position tool magazine - Pneumatic chip cleaning system - Maintenance tool kit - Programming and maintenance manuals in Italian - Integrated work light - Chip conveyor

Condition: excellent (used), Kuka Robot KR 70 R2100 SEL Industrial robot KCP 4 KRC 4 Complete Robot control cabinet, cable, panel Ledpfx Asznkfwjfkohk 2 units in stock

Condition: excellent (used), Kuka robot KR 70 R2100 / SEL SHL grinding system for battery casings In container, industrial robot Lhodpfxoznkb Ss Afksk Complete 2023

Condition: ready for operation (used), Year of construction: 2003, A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible. Lhsdpfxszrn Iqs Afkok

Year of construction: 1999, condition: ready for operation (used), Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible. Lsdezrn Htspfx Afkohk

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum Lodpfx Aoxzix Asfkshk • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Lhjdpfxszh Huhs Afkek Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Lhedpozh D Ryofx Afkek 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C Lhjdpfxozh D E Rs Afkok approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, total length: 1,410 mm, empty load weight: 423 kg, construction height: 1,060 mm, construction width: 2,150 mm, Bulk material bucket Lodpfx Afjwlxgtjkehk

Condition: used, functionality: fully functional, Year of construction: 2013, fuel type: diesel, Still RX70 - 60 forklift - Diesel Lhedpozt Ntdsfx Afkek Year of manufacture: 2013 Overall height: 2.65 m Lifting height: 3.5 m Fork length: 2.4 m Side shift

Condition: used, Year of construction: 1993, Second-hand machine Year of manufacture: 1993 Lsdpfezk N D Rox Afkohk Bench-top machine The zigzag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm in length, 35 mm in width and a thickness of 0.3–2 mm Electrical connection: 230 V Column reach 700 mm Material feed rate approx. 6 m/min. Weight approx. 54 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Lodpfxezk Nmrs Afkehk Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, maximum load weight: 29,770 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2024, Equipment: ABS, H&W (Vreden) AGRAR – Walking Floor 70 cbm, fully equipped First registration: 06/2024 Mileage: 77,648 km Dimensions (L x W x H): 11,560 x 2,480 x 2,360 / 2,566 mm (tapered design) Saddle height: 1,250 to 1,300 mm Overall height: 3,900 mm Lhjdpfszmqmrox Afkjk SAF axles "Off-Road" with large disc brakes, 430 mm WABCO trailer EBS with RSS stability program Chassis: Fine-grain steel, hot-dip galvanized Forced steering on the 1st and 3rd axles, TRIDEC system with rod steering 3 central lubrication points, positioned externally Tire size: 6 x 445/65 R 22.5 Cargo Floor, AGRAR version, with 15-plank system, reinforced design, 10 mm WIRELESS remote control for floor and rear door Profile supports on the side walls, completely welded from the inside (grain version) 2 reinforced transverse braces Stainless steel wear plate at the rear, under the floorboards Front wall with cleaning door Hydraulic rear door with grain slide Hydraulic connections on the front wall and additionally on the support legs PNEUMATIC DIVIDER POSITIONER RENTING is the new BUYING; with us, it is also available immediately in a full-service rental.

Condition: used, mileage: 253,491 km, power: 132 kW (179.47 HP), first registration: 02/2022, fuel type: diesel, overall weight: 7,200 kg, next inspection (TÜV): 01/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total width: 235 mm, loading space length: 516 mm, loading space width: 210 mm, loading space height: 210 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, If interested, please call or write via WhatsApp or Telegram. GERMAN TRUCK ZCFC670D105442417 Special equipment: * Storage compartment in the headliner of the cab * Storage compartment on the dashboard with USB port and inductive charging tray * Front axle load 2.7 t * Dashboard, comfort version * Audio system: Digital audio system (DAB) HI-Connect with 7" color display and navigation * Body manufacturer interface * Vehicle key with remote control * Programmable speed limiter system * Automatic climate control * Cooling compressor 170 ccm * Comfort headrests in the passenger compartment * Steering column (steering wheel) adjustable in height and length * Switch for lighting in the cargo area * Mud flaps, front * Seats in the cab: Double passenger seat with multi-function storage and storage compartment Additional equipment: * Airbag, driver's side * Trailer stabilization program (TSM) * Trailer socket preparation * Traction control system (ASR) * Design: C-series * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, long * for vehicle width 2350 mm * Electronic brake force distribution * Driver assistance system: Emergency braking assistant AEBS + City Brake * Digital tachograph * Front axle suspension: Torsion bar spring * Windshield and side windows, tinted * Generator 210 A * Speed limiter system 90 km/h * Grab handle, A-pillar * Urea tank (AdBlue): 20 L * Body/superstructure: Standard platform body * Fuel tank: 90 L * Engine 3.0 L - 132 kW Diesel * Wheelbase 4350 mm * Spare wheel with road tires Lhsdpfezpddisx Afkok * Spare wheel holder between the longitudinal members * Low emission according to emission standard Euro 6d * Seats in the cab: Driver's seat, comfort version (hydraulic) * Maintenance indicator * Permissible total weight 7.20 t * Twin tires on 2nd axle / rear axle

Condition: good (used), Year of construction: 2023, functionality: fully functional, total width: 650 mm, total length: 1,820 mm, Curve/Conveyor Curve/Roller Conveyor 70 degrees Vanderlande with drive Year of manufacture: 2023 Manufacturer: Vanderlande Model/Type: Rollers, 70-degree curve Condition: used (like new) Overall outer length: approx. 1820 mm Overall inner length: approx. 1120 mm Overall width: approx. 650 mm Conveyor width/Roller width: approx. 540 mm Roller spacing/Axle spacing: approx. 100/50 mm Curve consists of 22 rollers Roller manufacturer: Interroll Frame made of steel Frame height: approx. 130 mm Frame width: approx. 30 mm Including SEW motor 0.37 KW Stock quantity: 3 pieces Price per piece The conveyor system was in operation until it was dismantled. We will only provide a quote upon provision of a valid imprint; sales are only made to commercial customers. Internal article number: 2026071905 Thanks to the excellent workmanship of the conveyor system, your material will glide smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide variety of industries, such as logistics, the pharmaceutical industry, the trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or additional components such as picking racks or containers. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) Ljdpfezmqiasx Afkehk

Condition: used, Year of construction: 2023, functionality: fully functional, total width: 870 mm, total length: 2,040 mm, frame height: 130 mm, frame width: 30 mm, Curve/Conveyor Curve/Rollers 70 degrees Vanderlande with drive Year of manufacture: 2023 Manufacturer: Vanderlande Model/Type: Rollers, 70-degree curve Condition: used (like new) Overall outside length: approx. 2040 mm Lodpjzmqh Nefx Afkjhk Overall inside length: approx. 1120 mm Overall width: approx. 870 mm Conveyor width/roller width: approx. 740 mm Roller spacing/axle spacing: approx. 100/50 mm Curve consists of 22 rollers Roller manufacturer: Interroll Frame made of steel Frame height: approx. 130 mm Frame width: approx. 30 mm Including SEW motor 0.75 kW Stock quantity: 12 pieces Price per piece The conveyor system was in operation until it was dismantled. Offers will only be provided upon presentation of a valid imprint; sales are only to business customers. Internal article number: 2026071904 Thanks to the excellent workmanship of the conveyor system, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic devices for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Lhodpfxjx I D Tks Afksk Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Lhjdpfx Aszrnvzsfkjk Net price: 8,300 EUR (based on the rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1995, operating hours: 2,610 h, lifting height: 2,990 mm, fuel type: diesel, mast type: duplex, fork length: 2,290 mm, fork width: 1,380 mm, total height: 2,740 mm, total length: 3,500 mm, total width: 1,990 mm, color: red, Empty weight: 10.240 kg Lifting capacity: 7.000 kg Price: On request - Year: 1995 - Documentation available: Yes - CE marking present: Yes Lhodpfx Aezf Ha Esfkok - CE certificate present: No - Serial number: 6ZT15P2 - Operating hours: 2610 - Lifting capacity: 7000kg - Lifting height: 2990mm - Overhead clearance: 2740mm - Fork length: 2290mm - Maximum fork width: 1380mm - Minimum fork width: 400mm - Number of wheels: 6 Wheels - Attachment: Side-shift - Options: Full cabin, Air tires, Joystick, Camera, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Toyota - Transport dimensions: 3500mm x 1995mm x 2740mm (l x w x h) - Transport weight [kg]: 10240kg - Transport packages [pcs.]: 0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), functionality: fully functional, actuation type: hydraulic, punching force: 70 t, punching diameter: 28 mm, throat depth: 500 mm, overall weight: 1,600 kg, Used hydraulic punching machine Brand: GEKA Model: HYD 70-SD Serial number: 3659 Throat: 500mm Cutting capacity: Lhedpfx Ajznh Shjfkjk - L 90º: 130x130x13mm - Plate: 450x13mm - Round: 45mm - Square: 45mm - Notched: 250x250x6mm Maximum punching size: 28x20mm Tonnage: 70T Includes punches and dies as shown in the photographs. *Machine has been completely inspected and is in perfect working order.

Condition: used, CTS Type: TS-70/600-13 Water-cooled temperature test chamber Type series: TS-70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from 120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Electrical connection: 400/3P/N/PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg For your security as a buyer, please note the following information: Lhsdpfezg Tzfsx Afkek The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values Lodpfx Afjzg Ty Iokjhk - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.