Used Bioquell Fume Hood for sale (1,268)

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Dcsdpjzdtflofx Adhjn Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), mileage: 50 km, power: 103 kW (140.04 HP), first registration: 07/2026, fuel type: diesel, overall weight: 3,500 kg, loading space length: 3,700 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Year of construction: 2026, Equipment: ABS, air conditioning, airbag, all-season tires, cruise control, tire pressure monitoring, Food Truck Exhibition Vehicle. Dodpfx Adjywabpshecn Appearance Package! (Roof spoiler / alloy wheels) Ambient equipment (leather steering wheel, captain's chairs, etc.) Available for immediate delivery! Other configurations available upon request! Driving licence B! Equipment: - Gas supply system - Hygiene package - Gas stove with 4 burners and gas oven (gas-operated) - Double-basin fryer (gas-operated) - Griddle plate (gas-operated) - Bain-marie (gas-operated) - Tall refrigerator in the rear - Undercounter refrigerator - Undercounter freezer - Commercial extraction hood - Gas supply system - Partial stainless steel interior - Illuminated exterior flaps - And much more ... Financing available in Germany and Austria! Benefit from our over 40 years of experience in mobile vehicle construction for mobile sales solutions. Manufactured in Ibbenbüren, Germany!

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers Dcedpfszpcvdox Adhon 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: excellent (used), Fully hydraulic circular saw machine for workshops and production. The material is clamped using hydraulic clamping cylinders. The control system offers simple machine operation. The angle can be adjusted using a vernier scale with a resolution of 0.1 mm. The saw feed is controlled by a hydraulic cylinder, ensuring maximum cutting accuracy. If you have any further questions or require a different cutting range, please do not hesitate to call. We would be happy to show you the machine and demonstrate its capabilities. Technical data: Band saws KASTO Dsdpfjzqmh Tex Adhecn Machine type GKS U Technical data Drive power, saw gearbox 1.6/2.5 kW Cutting speed 14/28 m/min Cutting range, round: 140 mm Cutting range, flat: 160x90 mm Saw feed, hydraulic Hydraulic Saw blade dimensions 425 mm Material support 1050 mm Machine dimensions Length/Width 1250x1205 mm Height 1900 mm Machine weight 980 kg Year of manufacture 1992 Accessories 3000 mm 1x Horizontal clamping cylinder Coolant system Protective hood Pin guide Height adjustment Pressure switch

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding Dodpfx Adoy I Srzohecn MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 2,500 kg, lifting power: 1,700 kg/m, This advertisement is for informational purposes only and does not constitute a legally binding offer. FARMER 810 XL Compact. Powerful. Professional. In response to our customers' needs, we present the new FARMER 810 XL with a max. lifting capacity on attachment of 2000 kg, max. lifting capacity with pallet fork of 1900 kg. A perfect, maneuverable machine for both private customers and businesses! The machine is equipped with a powerful 4-cylinder KUBOTA engine, two driving ranges, and a differential lock. Thanks to its weight, it can be transported on a car trailer up to 3.5 tons – ideal for gardening and construction companies. ⸻ Dcodpfx Adeyk Edbshsn ⚠️ IMPORTANT NOTE REGARDING THE WARRANTY The WARRANTY applies exclusively to machines purchased DIRECTLY from us – not from other dealers. ⸻ FACEBOOK GROUP We cordially invite everyone to join our Facebook group “KINGWAY Machines.” There, we will provide information about new sales offers and help with any questions you may have about our machines. ⸻ ⚙️ TECHNICAL DATA Manufacturer: KINGWAY DEUTSCHLAND e. K. Model: FARMER 810 XL • Full cab with heating, ventilation • Road and work lights • Rear view camera • Radio • Suspended comfort seat • Heavy-duty axles • Incl. fork and bucket ⸻ ENGINE SPECIFICATIONS • Engine: KUBOTA V1505 Diesel • Cylinders: 4 • Emission class: Euro 5 • Power: 18.2 kW / 25 hp at 2,800 rpm • Max. torque: 92.6 Nm at 1,700 rpm • Cooling system: water-cooled • Noise level: 92 dB • Voltage: 12 V • Battery: 12 V / 60 Ah ⸻ ⚙️ DRIVE • Hydrostatic drive with driveshaft • Bondioli-Pavesi pump • 2 driving ranges + differential lock !!!! • Speed range 1: 0–8 km/h • Speed range 2: 8–20 km/h ⸻ CAPACITIES & PRESSURES • Fuel tank: 40 l • Hydraulic oil tank: 50 l • Hydraulic output: 46 l/min • Hydraulic pressure: 180 bar ⸻ ⚖️ WEIGHTS • Operating weight: 2,500 kg • Max. tipping load: 2,000 kg • Max. lifting capacity with pallet fork: 1900 kg • Max. lifting capacity on attachment: 2000 kg ⸻ DIMENSIONS • Steering angle: 42° • Turning radius inside/outside: 1,869 / 3,172 mm • Maximum lifting height: 2,210 mm • Dumping height: 1,650 mm • Dumping angle: 45° • Bucket volume: 0.5 m³ • Length: 3500 mm without bucket • Width: 1,490 mm • Height: 2,320 mm ⸻ TIRES • Standard: 31x15.5-15 agricultural profile ⸻ ⭐ SPECIAL FEATURES • Very high-quality & robust construction • EURO attachment (standard) • Lockable cab, tank & hood • Heating & ventilation • Rear view camera • Radio • Spacious comfort cab • Very maneuverable & compact • Hydraulic quick-change system • 3 and 4 hydraulic circuits • CE-certified according to the latest standards • Sale WITHOUT VAT possible (with VAT ID number) • FINANCING possible ⸻ SCOPE OF DELIVERY • Free delivery up to 200 km • FARMER 810 XL wheel loader • Bucket + pallet fork (4-in-1 bucket available on request) • Hydraulic quick-change system • Joystick control • 4x4 all-wheel drive • Road approval (COC) • Floating position • Operating permit • Differential lock ⸻ ACCESSORIES (OPTIONAL) • Tow hitch • Additional weights • Snow plow, sweeper • Crocodile jaws, grapple bucket • Volume buckets • Work platform ⸻ PRICE €23,100 net €27,489 gross

Condition: new, functionality: fully functional, This listing is for information purposes only and does not constitute a legally binding offer. The WARRANTY applies exclusively to machines purchased DIRECTLY from us, not from other dealers. KINGWAY DEUTSCHLAND is the only authorized stationary specialist dealer for the Kingway brand on the German market, with its own dedicated service department. ORDER YOUR MACHINE FROM A DEALER OPERATING NATIONWIDE ACROSS GERMANY! WHEN PURCHASING FROM US, YOU ARE GUARANTEED SERVICE AND THE POSSIBILITY TO MAKE WARRANTY CLAIMS – UNLIKE WITH OTHER DEALERS. Model: ZL918 Neon Operating weight: 4,150 kg Max. load capacity: 1,800 kg Bucket capacity: 0.65 m³ Dumping height: 2,850 mm 4-cylinder diesel engine: 36.8 kW / 2,200 rpm Hydraulic pressure: 16 MPa Steering angle: ±35° Turning radius: 4,500 mm Tyres: 20.5 / 70-16 Ground clearance: 200 mm Travel speed: 28 km/h Dimensions: 5,050 x 1,750 x 2,520 mm FEATURES: - Exceptionally high-quality and robust build - Lockable cab, fuel tank, and engine hood - Heating / ventilation - Rear-view camera - Spacious comfort cab - Easy handling - Highly maneuverable - Compact and versatile - Fully road-compliant lighting system - Hydraulic quick-coupler system - Dedicated hydraulic circuit for attachments - CE certified according to the latest standards and directives - Purchase possible WITHOUT VAT (only with valid VAT ID) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within a 200 km radius - Wheel loader / yard loader ZL918 NEON - Including 4-in-1 bucket + pallet forks - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive Djdeyk Sngspfx Adhecn - Float position For each of our loaders, you can additionally order: - Tow bar, - Counterweights, - Any type of accessory, such as push brooms, grapple buckets, snow ploughs, high-volume buckets, sweepers, grab buckets. PRICE: EUR 20,000 net EUR 23,800 gross

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, cabin, In our offer you will also find: - FARMER 810 – Perkins - diesel engine, 3 cylinders, price: € 19,500 net. - FARMER 810 Turbo – KUBOTA - diesel engine, 4 cylinders, cardan shaft, price: € 21,000 net. The FARMER 810 model is the ideal equipment for agriculture, construction, electrical, plumbing, repair and similar industries. We also guarantee equipment service after the warranty period. Wheel loaders are manufactured on the basis and under the supervision of European technicians. The equipment is made of a strong structure, it can work in any conditions. TECHNICAL PARAMETERS: - Manufacturer: KINGWAY GERMANY - Model: 810 - Full cabin with heating, ventilation, lighting, rear view camera, radio, ENGINE DATA: - Engine: XINCHAI - Diesel - Cylinders: 3 - Emissions class Euro 5 - Max. rated engine power: 18.2 kW / 25 HP at 2800 rpm Dcodpfxjvz Ua No Adhjn - Max. torque in Nm: 92.6 at 1700 rpm - Cooling system: Water-cooled - Noise level: 92 Db - Power supply: 12V - Battery: 12V / 60 Ah DRIVE Drive unit: Hydrostat (PWG ITALY) Drive speed (gear level 1): 0-20 km/h FILLING VOLUMES AND PRESSURES: - Fuel tank capacity 40 liters - Hydraulic oil tank capacity: 50 liters - Max. Hydraulic oil capacity: 42 L/min - Max. hydraulic oil pressure: 180 bar WEIGHT INFORMATION: - Operating weight: 2,300 kg - Max. tipping load: 1,600 kg - Max. lifting load (on the attachment): 1,000 kg DIMENSIONS: - Steering angle: 42° - Turning radius inside/outside: 1,869 mm / 3,172 mm - Lifting height (lower edge of standard bucket): 2,720 mm - Dumping height (with standard bucket): 1,950 mm - Dumping angle: 45 ° - Standard bucket: 0.5 m³ loading volume - Total length: 4,410 mm - Total width: 1,490 mm - Total height: 2,290 mm - Track width: 1,190 mm - Wheelbase: 1,690 mm TIRES - Standard: 31x15.5-15 field profile SPECIAL FEATURES: - very high-quality and robust workmanship - Euro mount (STANDARD) - lockable cabin, tank and engine hood - heating / ventilation - rear view camera - spacious comfort cabin - easy handling - very maneuverable!!! - compact and versatile - lighting system / street lighting - hydraulic quick-change system - third hydraulic oil circuit for attachments - CE tested according to the latest standards and guidelines - sale WITHOUT TAX possible (only with VAT number) - FINANCING possible SCOPE OF DELIVERY: - FREE delivery GERMANY-WIDE - A wheel loader / farm loader Farmer 810 - incl. shovel + fork (4in1 shovel on request) - hydraulic quick coupler - joystick control - 4x4 - all-wheel drive - EURO ATTACHMENT - ROAD APPROVAL - floating position - operating license for Germany For each of our loaders you can also order: - trailer coupling, - additional weights, - all possible accessories such as pusher, crocodile, snow plow, volume shovels, sweeper, grab shovel. PRICE: Net price €18,067 Gross price €21,500 WARRANTY: - Each machine has a 12-month warranty that can be extended for a further TWO years. - After the warranty period has expired, we ensure our customers have access to all spare parts. SERVICE: - We have our own mobile service that reaches all our customers in Germany and outside Germany.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Dcjdpfozxxmksx Adhsn Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs. Djdpfx Adstp Dhpohjcn  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) Dodpfjvpalajx Adhocn ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, Year of construction: 2023, operating hours: 447 h, power: 183 kW (248.81 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, parking heater, Technical Data ----Engine * DEUTZ TCD 6.1 L06 4V, Emission Stage V (Tier 5) * 6 cylinders, 6057 cm³ displacement * SCR system, EGR, passive DPF * Rated speed: 2100 rpm * Power at rated speed: 237 hp / 174.4 kW * Max. power: 247 hp / 181.3 kW * Electronically controlled Visco fan "eVisco" ----Transmission * TTV transmission T7780 (continuously variable), two automatically switched driving ranges * PowerZero, adjustable Powershuttle * Four driving strategies: Auto+, Auto, PTO, Manual * Three electronically switched rear PTO speeds (540E/1000/1000E) ----Hydraulics & Lifting System * Load-sensing variable displacement pump, 210 l/min flow rate * 5 additional control valves, electro-hydraulic, flow and time control * Rear lift with electronic control (EHR), 11,100 kg lifting force * Front lift with double-acting cylinders, 5480 kg lifting force * Duo front PTO shaft 1000/1000 ECO 1/min, electro-hydraulically switchable * Hydraulic lower link stabilization ----Tires * Front: 600/70R30 * Rear: 710/70R42 * Brand: Trelleborg ----Brakes & Axles * Braked front axle, sprung, ASM 100% differential lock * Two-circuit air brake system * Engine brake in combination with air brake system Equipment ----Cab & Comfort * MaxiVisionPro cab, pneumatically suspended, automatic climate control * Seat Max-Comfort Dynamic MSG97AL DOS EVO, swiveling, air-conditioned * Passenger seat upholstered with seat belt * DAB+ High Level radio, Bluetooth, USB, hands-free function * InfoCenterPro with 5" TFT color display * iMonitor3 in 12" (incl. TC-SC, GEO, VRC, AUX-N, UT, ISOXML) * XLarge Vision: Electrically adjustable & heated XL telescopic rear mirrors * Roof hatch with UV coating * Various LED work lights (a total of 8 on the roof, more on the hood and fenders) * Dirt-repellent floor mat, bracket for external monitor ----Electronics & Connectivity * CTM 1.2, Connectivity package for 1 year * AGROSKY Performance Steering ready with "EASY STEER" * Preparation for ISOBUS implement control (ISO 11783) * GNSS receiver SR20 PRO for RTK NTRIP (Galileo/GPS/Glonass) ----Special Equipment & Design * Warrior Equipment: lettering, LED headlights, muffler with stainless steel trim * Equipment "WARRIOR MATT BLACK" * Driver's seat Max-Comfort XXL partial leather * Chrome grille over exhaust pipe * 50 km/h Super-Eco, 50 km/h ECO Germany ----Further Features * Various sockets (e.g. for trailers with ABS, 7-pole for implements) * Automatic trailer hitch, height-adjustable * Trailer drawbar long ball K80, forced steering K50 Dsdezu U Snopfx Adhscn * Various toolboxes, operating manual, maintenance and safety instructions ----Vehicle Number 9378-----Errors and prior sale excepted

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Dodpfx Aszfi Hhjdhecn Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Djdpfx Aszg Er Asdhecn Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), Atlas Ci3000+ Xenon Weather-Ometer Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Djdpfszf D Rnjx Adhocn Machine Type: Xenon Weather-Ometer / Weathering Test Device For sale is a used Atlas Ci3000+ Xenon Weather-Ometer. The device is suitable for artificial weathering, light aging, material testing, quality control, as well as aging tests of plastics, paints, coatings, textiles, and materials. Technical Data Light Source: Xenon Arc Lamp Lamp Rated Power: 4,500 W Xenon Lamp Operating Range: 1,700 - 4,500 W Device Model as Displayed: Ci3000+ W Sample Sensor 1: Black Standard Sample Sensor 2: Black Panel Light Sensor 1: CI 300 - 400 nm Light Sensor 2: CI 420 nm Power Connection: 220 / 380 V Frequency: 50 Hz Connection Type: 3/N/PE Rated Current: 50 A Power Consumption: 9.5 kW Control Voltage: 24 VDC Compressed Air Supply Required Operating Pressure: 80 - 100 PSI / 552 - 689 kPa Compressed Air Consumption: approx. 4 CFM / 0.11 m³/min Dimensions approx.: 950 x 730 x 1,830 mm (W x D x H) Required Footprint approx.: 1,050 x 2,030 mm (W x D) Weight approx.: 404 kg Minimum Distance Exhaust Hood: approx. 102 - 152 mm Operating Data Equipment Touchscreen Control Panel Xenon Burner Test Chamber with Sample Basket Black Standard Sensor Black Panel Sensor CI 300 - 400 nm Light Sensor CI 420 nm Light Sensor Water-Cooled Lamp System Exhaust Connection Interface Connections Integrated Humidification System Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Existing Documentation as Shown in Pictures Existing Accessories as Shown in Pictures Areas of Application Artificial Weathering Light Aging Test UV and Xenon Testing Material Testing Plastic Testing Paint and Coating Testing Textile Testing Automotive Industry Quality Assurance Research and Development Scope of Supply Atlas Ci3000+ Xenon Weather-Ometer Existing Accessories as Shown in Pictures Existing Documentation as Shown in Pictures Condition Used Good Optical Condition Optical Condition as Shown in Pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Dcedoztpxmspfx Adhsn

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. Dcodozvm Anjpfx Adhsn The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. Dcodszukuropfx Adhsn - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,195 kg, color: black, gearing type: automatic, number of seats: 8, total length: 5,050 mm, total width: 2,275 mm, total height: 1,998 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Number: CHO26.TM57817 Errors and prior sale excepted! ----LOCATION: 04425 Taucha, Gerichtsweg 4 Phone number for inquiries: Mr. Ralph Bergel or bergel(at) ----SPECIAL EQUIPMENT * Trailer hitch, electrically pivoting Dodpfx Aozvi Nwjdhocn * Exclusive Package: Panoramic sunroof - Rear seat package 21 (6 rear seats, sliding doors on the right and left, 2nd row with 3 individual seats, outer seats heated, middle seat with a folding table on the backrest, 3rd row with individual seats) - B&O speakers - Ambient lighting * Windows, 2nd row: Opening windows in the side windows * Ford audio system with 13-inch multifunction display and Ford SYNC 4 including navigation - DAB/DAB+ - Vehicle modem - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - Amazon Alexa built-in voice assistance * Fuel tank 70 l * Heated steering wheel * Matrix LED headlights, adaptive - LED low beams including all-weather lights - LED high beams, glare-free - LED daytime running lights including integrated LED turn signals in the front - LED cornering lights, static - Speed-dependent beam range control - LED rear lights * Wheels: Alloy wheels 7.5 J x 19 in sports design in matte black * Parking heater (fuel-fired water heater) with remote control including H7 AGM dual battery * Technology Package 6: Exterior mirrors electrically adjustable, heated and foldable - Blind Spot Assist including CTA with trailer detection - Rear parking assist - Pre-Collision Assist, camera and radar-based - Driver fatigue warning system - Lane keeping assist, lane departure warning, lane change assist, lane centering - Traffic sign recognition - Wrong-way driver warning function - Parking pilot system front/rear - Adaptive cruise control including Stop&Go function - Intelligent speed limiter with speed limit display - 360-degree camera - Steering wheel in Sensico leather-look FURTHER EQUIPMENT * 3 USB ports for the 2nd row * ABS * Airbag, passenger side - with airbag deactivation function - Airbag, driver side - Side airbags - right and left * All-wheel drive * Overhead console * Theft alarm THATCHAM - with interior monitoring in the driver's cab and cargo area including central locking with additional double locking * Diesel particulate filter (DPF) with SCR catalytic converter and AdBlue tank * Vehicle modem - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Front power windows - with quick-up/down function * Parking brake, electric * Ford Key Free System - including Ford Power-Start function * Heated windshield * GT stripes on the hood, the lower front bumper and the tailgate - including side decorative stripes * Glove compartment with lockable lid * Interior lighting in the passenger compartment * Automatic climate control, 3-zone - with automatic temperature control for the driver and front passenger side as well as the rear, separately adjustable - Auxiliary heater, electric - Electric temperature control in the rear * Wireless charging station in the center console, for mobile devices - according to Qi standard * Large center console * Driver fatigue warning system * Emergency call assistant eCall * Picnic light * Tire repair kit * Tire pressure monitoring system * Windshield wipers with rain sensor * Sliding door, with power assist * Rail-based flexible seating system * Fixed side windows, second and third row, right and left * Seat package 19: Driver seat 5-way electrically adjustable - Front passenger indivi

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Special equipment: automatic oil skimmer Technical data Heatable for aqueous cleaning agents. For the removal of oil and grease contamination in the shortest possible time. Universally applicable for the fully automatic cleaning of small parts from production, manufacturing, and maintenance, such as bolts, sleeves, and ball bearings. 2129905 Easy operation thanks to the fully automatic cleaning process. This allows skilled workers to concentrate on other important tasks. The washing tank is filled with a mixture of water and a water-soluble IBS special cleaner (washing solution). The contaminated parts to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the device is switched on, and the solution in the tank is heated. In the closed device, the basket rotates around its own axis at a constant speed. The pump unit draws the washing solution from the washing tank and pumps it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The parts to be cleaned are intensively blasted with the hot solution from all sides during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the device switches off automatically. ∙∙ 1 pump arranged vertically ∙∙ 3 three-dimensional nozzle tubes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel (Ø 170 mm) ∙∙ rotating washing basket made of stainless steel, gear rim drive via separate motor ∙∙ intake filter in front of the pump shaft ∙∙ high spray pressure ∙∙ fume extraction ∙∙ stainless steel sieve plate with filter basket ∙∙ low water level protection W x D x H (closed): 1130 x 1010 x 1150 mm W x D x H (open): 1130 x 1220 x 1730 mm Dcsdpfx Adjzwb Eaehon Usable height: 500 mm Load capacity: 150 kg Basket diameter: 780 mm Washing tank capacity: 85 liters Pump pressure: 3.1 bar Spray rate: 4800 L/h Power consumption: 4.8 kW / 400 V / 50 Hz Weight: 90 kg Temperature: 0-60°C

Condition: excellent (used), MECALSA Continuous Industrial Fryer with Thermal Oil – Stainless Steel MECALSA continuous industrial fryer with a thermal oil heating system, designed for the continuous frying of food products in medium and high-capacity production lines. The equipment features a longitudinal process tank and a transport system that allows the product to remain in the oil for a controlled residence time. Indirect heating via a thermal oil circuit provides the necessary energy to the process while keeping the thermal fluid separate from the frying oil. Its construction, primarily in stainless steel, along with vapor extraction and process control systems, makes it particularly suitable for professional installations in the food industry. MAIN FEATURES -Manufacturer: MECALSA -Type: Continuous industrial fryer -Heating system: thermal oil -Continuous frying process -Longitudinal frying tank -Automatic product transport -Adjustable residence time depending on configuration -Circulation and control of frying oil -Independent thermal oil circuit -Indirect heat exchange -Temperature control -Piping and valve system -Vapor extraction system -Extraction hoods and ducts -Control electrical panel -Construction primarily in stainless steel -Industrial structure for continuous operation -Access points for inspection, cleaning, and maintenance -Integrable into automatic processing lines PROCESS The product is continuously fed into the MECALSA fryer and guided through the frying zone by the internal transport system. During this process, the product remains in contact with the frying oil at a controlled temperature for the time needed to achieve the required final characteristics of cooking, color, and texture. Heat is supplied through a thermal oil circuit, which transfers energy to the system without directly mixing with the oil used for frying the product. The vapors generated during frying are collected by the hoods and channeled to the extraction system. APPLICATIONS Especially suitable for manufacturers of pre-fried products, processed vegetables, potatoes, snacks, breaded products, and other food preparations that require a continuous frying process. Depending on the installed configuration, it can be used for: Potatoes and related products Vegetables Breaded or battered products Prepared meat products Fish and fish products Snacks Pre-cooked products Dcsdpfx Aozxwxxodhon Other specialties compatible with continuous frying It can be integrated with feeding systems, scalding units, dryers, conveyors, excess oil removal systems, coolers, IQF freezers, and packaging equipment. The combination of MECALSA technology, continuous process, and thermal oil heating provides an industrial solution for lines requiring uniform and controlled frying. Machine available for inspection. Additional technical information, production capacity, operating temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm Dedpfx Asw U Eg Rjdhecn spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces Djdjxabf Ejpfx Adhjcn - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: used, maximum load weight: 1,500 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 10/2023, total width: 2,090 mm, total height: 1,980 mm, Errors and prior sale excepted! Internal number: 1411. AAA0483 ----EQUIPMENT * Sales vehicle * Stainless steel cladding * Sales hatch on the left * Sales counter in stainless steel * Accessory shelf * Hygiene package with double sink * Hot water boiler with cold water pump * Deep fryer with 2 baskets * Bain-marie BMH160 * Storage refrigerator * Refrigerated table with 6 drawers * Refrigerated counter top * 2x extractor hood * LED counter and ceiling lights * Overrun brake system * Supports at the front and rear * Support wheel * Compartment for 2 gas cylinders ... and more ----The vehicle is in original condition! Dcedpfxjzfdm Ns Adhsn Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, mileage: 22,759 km, power: 130 kW (176.75 HP), first registration: 08/1995, fuel type: diesel, empty load weight: 6,930 kg, maximum load weight: 2,570 kg, overall weight: 9,500 kg, axle configuration: 4x4, wheelbase: 3,700 mm, fuel: diesel, color: red, driver cabin: other, gearing type: other, emission class: none, suspension: other, number of seats: 9, total length: 7,020 mm, Year of construction: 1995, operating hours: 101 h, construction height: 3,100 mm, Equipment: all wheel drive, trailer coupling, The used Iveco FF 95 E LF 8 is a robust fire engine with a 4x4 all-wheel drive and a double cab, ideal for operations in challenging terrain. The 1995 model offers swap loading and comes with a 620-litre fire water tank and an integrated FP 8/8 pump. It has a mileage of 22,759 km and first-class care behind it, which leaves it in excellent condition despite its age. Under the hood of the Iveco is a powerful diesel engine with 130 kW (177 hp) and a displacement of 5,860 cc, which provides the necessary power reserves, especially when fully loaded. The Djdpfor Uzfusx Adhecn vehicle has a red paint job, measures 3,100 mm in height, 2,500 mm in width and 7,020 mm in length. With a wheelbase of 3,700 mm, the truck offers solid roadholding. The fire service vehicle has single tires and a permissible total weight of 9,500 kg. Inside, the double cab offers space for up to 9 people, making it ideal for larger teams. Overall, the Iveco is in good used condition, with only one previous owner and a low operating hour count of 101 hours. Double cab, box body with roller shutters, 620 l fire water tank, built-in pump FP 8/8. Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.