Used Bernardo Lathe-Conventional-Electronic for sale (13,770)

Condition: excellent (used), Year of construction: 2008, turning length: 3,000 mm, spindle bore: 155 mm, spindle motor power: 51,000 W, total height: 3,200 mm, total length: 9,500 mm, total width: 3,200 mm, turning diameter over bed slide: 1,420 mm, workpiece weight (max.): 5,000 kg, overall weight: 16,000 kg, Make: Krewema Type: HFDM 55 Control: SIEMENS 840D Ndsdpfx Abez R Rdmsyec YOP: 2008 4 chuck 1600 mm 4 chuck   900 mm 3 chuck   630 mm ( bore 310) Sauter 8 position revolver Vdi 60 tool system Internal coolant tool holder Radial live tool holder Axial live tool holder Chip conveyor double  Internal coolant tool holder Swing over bed Ø: 1420mm Swing over cross slide Ø:920mm Swing in the gap Ø: 2050mm DBC Turning Length: 3000/4000mm Gap length: 1000mm Spindle bore: 155mm Spindle power: 51kW Bed width: 750mm Tailstock spindle Ø: 160Ø Stroke pinole: 300mm Workpiece weight: 5000 Speeds / ranges: 1200Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 6000mm/min. Length: 9500mm Width: 3200mm Height: 3200mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Nodpfjz Rnrrjx Abyjdc Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 62 mm Nedpfx Abjt Tqgxjyedc spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U dimensions of the machine ca. 3,5 x 1,6 x 1,7 m total power requirement 9 kW weight of the machine ca. 4,5 t Machine has a 4 position tool holder, a three jaw chuck, a rotating center and a taper gauge.

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven Ndedpfx Abozcd Hleysc - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Ndjdpfxoztypvj Abyjc Type: E40 Year of Manufacture: 2011 Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp - Full chuck jaws - Half chuck jaws - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 800 kg, chuck outer diameter: 800 mm, mount diameter: 520 mm, bolt circle diameter: 436 mm, cone mount: 286 mm, Pos. 1.0) Chuck diameter ø 800mm Three-jaw power chuck with 6 clamping jaws Manufacturer: SMW-Autoblock ø 800HL-6GR incl. Flange size 11: SMW Autoblock: 241261 FF2 Thread connection for draw tube: Workpiece clamping via jaws: Pneumatic or hydraulic operation. Incl. bolt-on jaws with serrated interface: Weight: approx. 700kg Good condition, low operating hours. ----- Pos. 1.1) Optional flange available Mounting diameter: 520 mm Bolt circle: 436.6mm; M24 Taper: KK 15: 285.78mm Width: approx. 40mm Weight: approx. 60kg _____ SMW-800HL description Suitable for clamping thin-walled workpieces. Designed for horizontal CNC lathes. Adjustable to 6 jaws. STANDARD EQUIPMENT Power chuck with mounting bolts, Incl. set of bolt-on jaws Low maintenance due to sealed design (Proofline series chucks). 6-jaw power chuck _____ Pos. 2) 3-jaw power chuck ø 800 mm Manufacturer: FORKARDT: Nedsy Appmjpfx Abysdc Jaw interface: Serrated Size: to be provided Thread connection for draw tube: on request Spindle adapter flange for machine: on request Price incl. shipping: on request

Condition: used, Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Doosan Turning Center 2 Axes (X, Z) Model: Puma GT2100B Year: 2018 CNC: Fanuc Ndjdpfx Absz St Tqoysc CE Certification Chip Conveyor: Operational ✅ Documentation: Available ✅ Chuck: Operational ✅

Condition: ready for operation (used), Year of construction: 1999, Lathe STANKO IMPORT 1M63H-1.5, year of manufacture 1999 with 2-axis digital display Heidenhain, faceplate 610 mm, Multifix holder size C with 2 tool pockets, with upper slide feed. Turning diameter: 630 mm Turning length: 1500 mm Spindle bore: 105 mm Spindle speeds: 10 to 1250 rpm Spindle nose: DIN 11 Weight, approx. 5,000 kg. Coolant system, machine lamp. Machine documentation available. Good condition, ready for use. Further data can be found in the data sheets. Ndodpfxjz St Uus Abyjc

Condition: reconditioned (used), Year of construction: 2003, Turning machine Gildemeister Type/Model: DMG NEF 320 K Condition: Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture: 2003 The machine was completely disassembled, cleaned, geometrically overhauled, repainted, and reassembled. The machine bed and guides were professionally refurbished. All slides were inspected, adjusted, and set. The main spindle, gearbox, feeds, tailstock, coolant system, as well as the electrical and mechanical functions were checked. Finally, a geometric measurement with a test protocol according to DIN 8605 was carried out, as well as a test run under realistic conditions. Features Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical data Swinging diameter over bed: 320 mm Swinging diameter over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed rate AC: 4 m/min Spindle mounting: MK 6 Turning spindle size: 6 Speed range: 14 - 3550 min-1 Spindle bore: 52 mm Spindle mounting: MK 6 Njdpfjwlhn Hjx Abysdc Spindle in front bearing: 85 mm Tailstock quill: 70 mm Tailstock quill mounting: MK 5 Tailstock quill travel: 120 mm Max. torque: 320 Nm Speed range: 14 - 3,550 1/min Gear stages: 2 Drive power: 7 kW Tool holder: Multifix size B Dimensions (L x W x H): approx. 2600 x 1440 x 1800 mm Weight: approx. 1500 kg Inquiry item: Transportation costs will be provided in a separate offer.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II Max. machining diameter: 280 mm Max. machining length: 300 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Ndjdpfx Abszv D H Rsysc The machine is equipped with: - CNC control system: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 1 set of tool holders for a 12-position turret

Condition: excellent (used), Year of construction: 2018, operating hours: 4,566 h, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 1,824 mm, total length: 2,800 mm, total width: 1,790 mm, overall weight: 4,350 kg, Tooling package with Tool Holders Axial driven live tools holders Radial driven live tools holders Kitagawa B210 3 Power Chuck Max. turning Ø: 580mm X-Axis: 260mm Z-Axis: 565mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW ATC / revolver: 12 Speed live tools:6000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 4566H Pinole taper: 5Mk Length: 2800mm Width: 1790mm Height: 1824mm Weight: 4350kg Nedpfx Aboz Syh Usyedc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, Technical Data – Solidturn 200/1500 B – Universal Lathe Working Area Distance between centers Ndjdpfxswuvace Abyjc 1500 mm Max. turning diameter over bed 400 mm Max. turning diameter over carriage 225 mm Max. turning diameter over gap 530 mm X-axis travel 330 mm Z1-axis travel 130 mm Gap length 320 mm Bed width 330 mm Cross slide swivel range 360° Main Spindle Speed range (15) 22 – 2000 rpm Spindle bore 85 mm Spindle mount Camlock D1-6 Spindle taper MT 5 Feed Feed X-axis 0.036 – 2.019 mm/rev Feed Z-axis 0.072 – 4.036 mm/rev Thread Cutting Metric thread cutting 0.5 – 28 mm Diametral thread cutting 8 – 56 mm Module thread cutting 0.5 – 3.5 mm Whitworth thread cutting 1 – 56 TPI Tailstock Tailstock quill diameter 65 mm Tailstock taper MT 5 Tailstock quill stroke 120 mm Tailstock lateral adjustment ± 5 Drive Power Main spindle motor power 7.5 kW Supply voltage 400 V Dimensions and Weights Dimensions 2920 x 1150 x 1800 mm Weight 2240 kg

Condition: used, Technical Data Faceplate diameter: 1580 mm Max. turning diameter: 1700 mm Max. turning height (cross rail support): 1250 mm Max. turning height (side support): 1160 mm Max. faceplate load: 12,000 kg Max. distance from faceplate to underside of cross rail: 1210 mm Max. distance from faceplate to underside of side toolholder: 980 mm Max. distance from faceplate to underside of turret head: 1420 mm Njdpfx Abowyn Ntsyedc 18 spindle speeds: 2.8 – 140 rpm 18 feed rates: 0.063 – 3.15 mm/rev Total power requirement: 55 kW Required floor space approx.: 5300 x 3500 x 4100 mm Control: conventional

Condition: excellent (used), Year of construction: 2004, Weiler Primus VC Ndedpfey I U Dysx Abysc Lathe Primus VC with Heidenhain digital readout, year of manufacture 2004, in excellent original condition. The machine comes from the prototype workshop of a renowned German mechanical engineering company. CE compliant! Technical Data: Year of manufacture: 2004 Weiler Primus VC Center height: 140 mm Center distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE conformity declaration About the machine: The Weiler Primus VC is the smallest machine in the Weiler range. The Weiler Primus VC is a lathe for the highest demands: with stepless speed control, constant cutting speed, and a powerful 4 kW drive (40% duty cycle). The compact machine of great quality is found wherever maximum precision is required in limited spaces: such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a Weiler Primus VC lathe with Heidenhain digital readout, year of manufacture 2004. This lathe is in excellent, original condition. It comes from an operation where it was lightly used only for prototype construction. Very easy-to-use controls. The guideways are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically tested by us. Take the opportunity to view and test the Weiler Primus VC under power at our site. Further lathes from well-known manufacturers can be found on our website.

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Nodpfx Abs Ad Ik Hsysdc Manufacturer: Traub Type: M125 Year of Manufacture: 1973 Machine Type: Turning Automaton MACHINE DETAILS Electrical Data Operating Voltage: 83 V Frequency: 50 Hz Dimensions and Weight Length: 1,500 mm Width: 1,000 mm Height: 1,600 mm Weight: 800 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Centering device Faceplate diameter: 1,000 mm 3-jaw chuck diameter: 400 mm Dimensions Length: 1,000 mm Width: 500 mm Ndedpfxj Aduf Ds Abyjc Height: 1,100 mm Weight Weight: 300 kg EQUIPMENT Faceplate 3-jaw chuck

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Turning data Turning length: approx. 700 mm Center height above bed: 160 mm Turning diameter above bed: 320 mm Center height above carriage: 100 mm Turning diameter above carriage: 200 mm Spindle bore: approx. 36 mm MACHINE DETAILS Njdps Ad E Suefx Abyedc Manufacturer: Hahn und Kolb Machine type: Lead screw and feed screw lathe Length: 1,800 mm Width: 500 mm Height: 1,500 mm Weight: 1,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SWING Swing length: approx. 1,200 mm Center height above bed: 240 mm Swing diameter above bed: 480 mm Center height above tailstock: 150 mm Swing diameter above tailstock: 300 mm SPINDLE Spindle speed: 140–1,800 min⁻¹ Spindle bore: approx. 38 mm MACHINE DETAILS MACHINE DATA Machine type: Lead and feed screw lathe Manufacturer: VDF Boehringer DIMENSIONS AND WEIGHT Length: 3,500 mm Width: 1,000 mm Height: 1,600 mm Nodo Ad Hchopfx Abyedc Weight: 1,000 kg

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: VDF Boehringer Type: V800 Ndodo Ad Hgtepfx Abysc Year of manufacture: 1974 Machine type: Lead and draw spindle lathe WORKING AREA Turning length: approx. 1,200 mm Center height above bed: 430 mm Turning diameter above bed: 660 mm Center height above carriage: 260 mm Turning diameter above carriage: 520 mm SPINDLE Spindle speed: 7.1–1,400 min⁻¹ Spindle bore: approx. 140 mm MACHINE DETAILS Dimensions (L × W × H): 4,000 × 2,000 × 1,800 mm Weight: 5,000 kg EQUIPMENT Multifix tool holder 3-jaw chuck, diameter 600 mm

Condition: like new (used), Year of construction: 2015, Workpiece Ø max. 400 mm Workpiece length max. 300 mm Chuck Ø max. 500 mm Swing Ø 520 mm Travel X-axis: 1,110 mm Njdpfxoxy Ac So Abyodc Travel Z-axis: 595 mm Main spindle: Power 40 / 100 % duty cycle: 47/34 kW Main spindle: Torque 40 / 100 % duty cycle: 600 Nm Main spindle: Max. speed: 2,850 rpm Control: Fanuc 31i No Y-axis

Condition: excellent (used), Year of construction: 2012, Index GU 600 H Data X: 181 mm Z: 650 mm Chuck: 200 mm Turret: VDI 30 / 12-station Siemens 840 D Main spindle: 65 mm Chip conveyor Nsdsy Urf Ujpfx Abyedc Coolant system Documentation

Condition: as good as new (ex-display), Year of construction: 2022, • Hwacheon Cutex 180 AL YSMC, year of manufacture 2023, new machine • Control: Fanuc 0i-TF Plus LCD with Manual Guide I • Rapid traverse X / Z / B: • 36 / 36 / 36 m/min • Y-axis travel: +/- 55mm • Max. turning diameter: Ø 300mm • Max. turning length: 478.5mm • Chuck size: • 6” / Ø 150mm, 5” / Ø 120mm • Max. spindle speed: • Main spindle 6,000 rpm • Sub spindle 6,000 rpm • Bar capacity: Ø 51 / 32mm • Main/Sub spindle motor power: • 11 / 15 kW, 3.7 / 5.5 kW • 12-station turret, all stations driven • 5,000 rpm 3.7 / 5.5 kW • Robust one-piece slant-bed made from stabilized Meehanite cast iron, with precision linear guideways on all axes Ndsdpszw Udisfx Abyoc • Powerful spindles with spindle nose A2-5 / Sub A2-4 • Automatic tool presetter • Parts catcher • Full enclosure • Hydraulic system • Coolant system with movable tank, 6 bar pump • Ergonomic pivoting control panel • Electronic handwheel • Waterproof LED work area lighting • Transformer

Condition: used, total length: 1,800 mm, total width: 110 mm, total height: 1,700 mm, Year of manufacture: 1985 Colour: Grey Empty weight: 1.000 kg - Year: 1985 - Documentation available: No - CE certificate present: No - Serial number: 315.928 - Drive system: Conventional - Centre height [mm]: 750 - Swing over bed [mm]: 1500 - Distance between centres [mm]: 600 - Transport dimensions: 1800mm x 110mm x 1700mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nsdpezrxgwofx Abyedc Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Two machines with extensive equipment and an attractive accessory package! Njdpfx Abez Tc Iyoyedc Both machines share a common chip conveyor, which ensures efficient chip removal. In addition, a coolant tank has been retrofitted, which provides a valuable extension to the equipment. A particular advantage is the comprehensive accessory package: the scope of delivery includes various tool holders, clamping jaws, and a new driven tool (AGW).

Condition: used, total length: 5,100 mm, total width: 1,800 mm, total height: 1,950 mm, Year of manufacture: 2013 Colour: White Empty weight: 7.500 kg Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - Serial number: 40032 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 445 - Swing over bed [mm]: 890 - Carriage turning diameter [mm]: 490 - Distance between centres [mm]: 3000 - Bed width [mm]: 700 - Spindle bore [mm]: 155 Ndjdpfx Ajznmlgjbyec - Min. spindle speed [rpm]: 3.7 - Max. spindle speed [rpm]: 1000 - Max. workpiece weight [kg]: 5000 - Options: Three-jaw chuck, Removable bed, Fixed steady, Quick-change tool post, Digital readout - Swing over removable bed [mm]: 1060 - Type of digital readout: Fagor - Transport dimensions: 5100mm x 1800mm x 1950mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum