Used Bed Type Milling Machine - Horizontal for sale (88,788)

Condition: used, Year of construction: 1973, spindle diameter 140 mm x-travel 2000 mm y-travel 2000 mm z-axis 1500 mm spindle stroke - max. 800 mm spindle taper ISO 50 table surface area 1800 x 1500 mm table load 15000 kg turning speed range 2,3 - 810 U/min total power requirement ca. 30 kW weight of the machine ca. 31000 kg dimensions of the machine ca. 7300 x 5600 x 4000 mm Equipment: Ibodpfx Aey Umc Usatoa - Faceplate with NC facing slide and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm Ibedpfx Aajtv H Ucotea rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: new, WM5150 ROGI bed milling machine 400V-3Ph Ijdpsga T Dwefx Aatoba Motor ----- 2.4 kW Vertical spindle speed range ----- 94 ~ 2256 rpm Spindle taper ----- ISO 40 Table ----- 1220 x 360 mm Quill stroke ----- 180 mm Quill feed ----- 0.1 / 0.15 / 0.3 mm/rev Longitudinal travel (x) ----- 600 mm Transverse travel (y) ----- 360 mm Vertical travel (z) ----- 500 mm Overhang ----- 370 mm Spindle head swivel range ----- -45 to +45 degrees Spindle / table distance ----- 110 - 610 mm Feed range longitudinal / transverse ----- (8) 24 - 720 mm/min Weight ----- 1800 kg INCLUDED * 3-axis digital readout, SINO brand * Automatic feed for work table X, Y * Automatic spindle feed * LED lighting * Cooling system * Deluxe control cabinet * Toolbox with various tools

Condition: like new (used), Year of construction: 2011, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 10000 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 150 - 2650 mm  (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 Tn/m2Machine weight approximate: 56000 kgMachine dimensions approximate: 16520 x 8575 x 5290 mm Accessories Guarding: front sliding doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeElectronic handwheel: HR-410Coolant: external internal high-pressure coolant through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Ibsdpfx Aaszcz Srjtea

Condition: good (used), Year of construction: 1982, Bed milling machine Machine type: Reiden BF 4 Control: Siemens 840 D powerline Year: 1982 Revision: 2004 SPECIFICATIONS X-Axis: 2.000 mm Y-Axis: 800 mm Z-Axis: 1.000 mm Feed: (X/Y/Z): 6 m/min. milling head Angular range: +/- 90° Spindle speeds: 20 - 2.000 rpm Spindle power: 21 kW Tool: ISO 50 Ibodpfx Aozi Dzuoatoa Table size: 2.200 x 700 mm Machine weight: 10.000 kg

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Ibodpfx Aszc D Amsatja Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: repair required (used), feed length X-axis: 1,500 mm, feed length Y-axis: 600 mm, feed length Z-axis: 450 mm, Manufacturer: Reckermann Ijdpfxouhnzns Aatjba Tip: Beta 10 Movements: X: 1500 mm Y: 600 mm Z: 450 mm Control: Sinumerik 810M Y-axis does not move, it does not stand on a reference point!

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, travel distance X-axis: 15,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,915 mm, spindle speed (max.): 700 rpm, total width: 6,400 mm, total length: 19,300 mm, total height: 10,370 mm, feed length W-axis: 3,000 mm, spindle diameter: 250 mm, table height: 400 mm, table length: 8,000 mm, table width: 5,665 mm, overall weight: 137,000 kg, year of last overhaul: 2006, grinding spindle motor power: 83,000 W, type of input current: three-phase, We offer for sale a Škoda W250H floor boring machine. This machine is designed for machining heavy and large-sized components for the energy, shipbuilding, metallurgical, mining, and machine production industries. The machine is equipped with a Siemens Sinumerik 840D control system, enabling the execution of demanding boring, drilling, and milling operations. Complete technical documentation is available. Upon request, we can provide additional photos, videos, and information regarding the machine's equipment and technical condition. Standard equipment: Tool and measuring instrument storage rack, mounted on the spindle box. Optional equipment: Ibedozrwq Iopfx Aatja Cooling system with coolant Rotary table 4000x3550 3 x angular heads

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h Ibedpfx Aajzbmzvstea spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 1992, Table surface area: 1850 x 710 mm Permissible table load: 3000 kg Travel ranges: Longitudinal, automatic (X): 1600 mm Lateral, automatic (Y): 710 mm Vertical, automatic (Z): 850 mm Spindle mounting: SK 50 Speed range: 20 - 2500 RPM Main motor power, AC: 15 kW Transport dimensions L x W x H: 3650 x 2300 x 2700 mm Weight: 9400 kg Accessories / Special features: • CNC path control system, manufacturer HEIDENHAIN, model TNC 360 with 3 scales • Programming language "Plain text dialog" and DIN-ISO • Electronic handwheel HEIDENHAIN HR 330 with magnetic holder • 3D probing system HEIDENHAIN TS 120 • Main spindle compact unit RAC 3 • Control system prepared for 4th axis • Universal milling head system "HURON" with 2 levels, gears run in an oil bath • Hydraulic tool clamping • Coolant system • Central lubrication with interval • German electrical system, drives INDRAMAT • Operator control panel Ibsdpfxsttamkj Aatsa • Operating manual - Newly refurbished milling head, partially overhauled with new gears, seals and bearings - Oil dispenser for central lubrication renewed Operating hours: 10,032 Program runs: 3,288 Spindle ON: 2,569 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2013, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 62130810, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,300 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, rapid traverse X-axis: 16,000 m/min, rapid traverse Y-axis: 16,000 m/min, rapid traverse Z-axis: 16,000 m/min, CNC bed-type milling machine Kiheung KNC U1050 - Control: HEIDENHAIN iTNC 530 - Tool holder SK50 - Coolant tank 600 l - Universal automatic milling head A 4 Plus Ibedjxp N H Njpfx Aatja - High-performance cooling system with 2 high-pressure pumps, CTS 16 bar, paper filter - 2 coolant water tanks - Coolant spray gun - Hinged chip conveyor

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Ibedpfx Aaoyr Dmdotoa Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 16,000 m/min, feed rate Y-axis: 16,000 m/min, feed rate Z-axis: 16,000 m/min, spindle speed (max.): 4,000 rpm, table width: 900 mm, table load: 10,000 kg, table length: 2,700 mm, total height: 3,440 mm, total width: 6,000 mm, total length: 7,000 mm, overall weight: 24,000 kg, power: 38 kW (51.67 HP), CNC Bed-Type Milling Machine Ki-Heung - U1050 MACH-ID 9598 Make: Ki-Heung Type: U1050 Control: HeidenHain iTNC530 Year: 2014 A4 Automatic head 2.5 x 2.5 Degrees Drum AC 24 positions HeidenHain iTNC530 HeidenHain HR-410 Wandwheel Flatt guideways / High Ridgid machine  Oil Chiller Covered CE-Doors X-Axis: 2500mm Y-Axis: 1050mm Z-Axis: 1600mm Table Length: 2700mm Table Width: 900mm Table load: 10000 Ibsdey Ew Suopfx Aatoa Power on spindle: 38kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 16000mm/min. Feed rate Y-Axis: 16000mm/min. Feed rate Z-Axis: 16000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 7000mm Width: 6000mm Height: 3440mm Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg Ibjdpfjrx Rxtex Aatsa

Condition: good (used), Year of construction: 2007, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, Manufacturer: Lagun Goratu Type: GBM CM5 Control system: HeidenHain iTNC530 Year of construction: 2007 Specifications: Metric Metric US Standard X-axis 5000 mm Y-axis 1200 mm Z-axis 2000 mm Table length 6500 mm table width 1100 mm Table load 6000 Spindle power 37 kW Spindle speed 4000 rpm Iedpfx Asvd Ddceatjba Tool holder 50 ISO/Bt/Mk Feed X - axis 20000 mm/min. Feed Y - axis 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto index 2.5 x 2.5 ° Working hours 18000 H Dimensions (estimate) length 8400 mm width 6800 mm height 4800 mm weight 34000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Profile machining center, portal milling machine Type: MBZ 72/80-3 Year of manufacture: 2002 Ibjdpfx Aaey S Hazjtsa Condition: used Technical data: x-axis: 7000mm y-axis: 1000mm z-axis: 370mm Spindle drive: 6.8KW Spindle speed: 20,000 RPM Tool holder: SK30 Pull stud: DIN 69872 Tool changer: 12 Special equipment/accessories: – Vögele central lubrication system – Niels minimum quantity lubrication system – Vacuum system with 8 clamping modules – 8 tool holders incl. tools – Workpiece probe incl. tool holder – Documentation

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection Iedsw Ty S Sopfx Aatsba - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Ibjdpsyrndmefx Aatsa Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: used, spindle diameter 110 mm x-travel 2000 mm y-travel 1500 mm z-travel 1450 mm table surface area 1400 x 1600 mm Ibsdpfx Asyuqhysatea taper ISO 50 spindle speed: 2 - 2500 Control TOSNUC 7-3 total power requirement 22 kW

Condition: used, spindle diameter 125 mm spindle travel 1000 mm column movement horizontal 7000 mm headstock - vertical 2500 mm/min cross travel column 450 mm taper ISO ISO 50 P.D.B. total power requirement 25 kW Ibedsyuql Eopfx Aatoa

Condition: used, Year of construction: 2008, MILLING MACHINE STS AVANTGARDE HS YEAR: 2008 CNC: SELCA S 4045 DH WORKTABLE DIMENSIONS: 2,200 mm x 1,100 mm TRAVEL PATHS: X: 2,000 mm Y: 1,500 mm Z: 1,500 mm SPINDLE TAPER: ISO 50 Ibodsxc Umhopfx Aatoa MAX. ALLOWABLE LOAD: 6,000 KG AUTOMATIC BI-ROTARY HEAD: A 2.5° - B 2.5° SPINDLE SPEED: 4,000 rpm POWER: 37 KW TOOL MAGAZINE: RANDOM, 24 POSITIONS HIGH PRESSURE: 20 BAR ACCESSORIES: 2-SPEED RANGE SELECTOR CHIP CONVEYOR MACHINE CAN BE SEEN IN OPERATION COMPLETE DOCUMENTATION

Condition: used, FOREST-LINE SERAMILL V3 270 2T is a gantry milling machine designed for high-precision machining, high accuracy and process reliability. Working capacities: 2 tables (table lengths 3000 mm and 4000 mm, widths 2000 mm), X axis 5000 mm (with 1 table), Y 3400 mm, Z 1250 mm, A axis ±135°/2.5° and C axis 360°/2.5°; distance between columns 2700 mm, table load max. 10,000 kg. Main specifications: spindle nose SK50, spindle speeds 10–6000 t/min, spindle motor 31 kW, spindle torque 430 Nm, total power required 90 kVA; feeds 1–30,000 mm/min on X/Y/Z; rapid traverse X 30’000 m/min, Y 40’000 m/min, Z 30’000 m/min; voltage 3x 400 V 50 Hz. Equipment: tool magazine 120 places, tool holder 700 pce, automatic tool setting BLUM, touch probe M&H. Delivers tight tolerances and is suited to automotive, aerospace, machine tool, medical and watchmaking sectors. Iodpfxey T N Ttj Aatsba

Condition: used, Year of construction: 2002, spindle diameter 130 mm x-travel 3500 mm y-travel 2500 mm Isdpfx Aeyqvqrjatsba z-axis 1250 mm W-axis (spindle longitudinal) 800 mm ISO 50 P.D.B 1800x2500 mm 12 t 3000 Hertz 400 total power requirement 37 kW ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 110 mm x-travel 2000 mm y-travel 1700 mm Control Fanuc spindle taper ISO 50 z-travel 1400 mm Table area 1250x1500 mm Table load 5000 kg spindle turning speed range 35-3000 U/min Tool changer 60 total power requirement 18,5 / 22 kW weight of the machine ca. . t dimensions of the machine ca. 1250 x 1500 mm Fanuc 31 iMB (Manual Guide i) control system Other controls such as Siemens, Heidenhain, etc. are possible W-axis 550 Chip bucket Coolant system 20 bar Table guards The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Isdpfsyquf Iex Aatjba We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, spindle speed (min.): 4,000 rpm, TABLE DIMENSIONS: 2000 x 750 mm ROTARY TABLE DIMENSIONS: Diameter 800 mm TOOL CHANGER: 30 positions Ibedpfxjzi Eyrj Aatsa AUTOMATIC HEAD CNC: HEIDENHAIN TNC 530