Used Brevis 100 Met Afdekluiken for sale (25,006)

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Installation Internal Number: #499 Rockstroh Drain Jet 100-2 * PTO from the Sprinter * Pratissoli KF32 high-pressure pump * approx. 120 liters/minute at 180 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 Bodexc Syrepfx Ammjdc * Filling hose reel with approx. 40m DN20 * approx. 1,000 liter water tank * Low water cut-off protection * Electric filling equipment and overflow protection * Electronic speed regulation * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with non-slip surface * Basic set of cleaning nozzles Special equipment: 2nd battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, 1-pole battery isolator switch, driver assistance system: traffic sign recognition, tachograph control in front under headliner, chassis: stabilization level III, all-weather floor mats, vehicle without tie-down points, transmission lock for PTO, front cup holders, A-pillar grab handles, additional main key, rear door (opening angle 270 degrees), hinged lid for storage compartment, terminal strip for electrical connections (driver’s seat console), comfort lighting in passenger/load compartment, dash load package (USB ports and additional 12V socket), wiring duct at rear portal, wiring duct at side wall, navigation system for MBUX multimedia, fog lights with cornering light, PTO 2B with intermediate shaft, parameterizable special module, cross member for trailer hitch, cross member with integrated step, sliding door left side load/passenger compartment, rear mud flaps, driver’s cab seats: comfort driver’s seat, sensor for auxiliary heater tank, additional battery separation relay, reinforced front axle, provision for transmission oil cooler, provision for load area partition, winter package, soft-close sliding door left, soft-close sliding door right Further equipment: 3rd brake light, overhead storage above windshield, storage compartment below dashboard passenger side, adaptive brake light, passenger airbag, driver airbag, acoustics package, hill start assist, trailer coupling: electrics for trailer socket, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors (both), exterior mirror with blind spot assist, outside temperature display, DAB tuner (digital radio), ceiling light in cargo space with door contact, automatic driving light control, entry grip on right rear pillar, entry handle for sliding door at load area partition, driver assistance system: turn assist, driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: start info assist, driver assistance system: attention assist (fatigue detection sensor), driver assistance system: intelligent speed assist, driver assistance system: breakdown management, driver assistance system: crosswind assist, digital tachograph, 250 A alternator, speed limiter system 90 km/h, body/superstructure: standard high roof van, instrument cluster with color display, communication module (LTE) for digital...

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, spindle speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, working width: 2,000 mm, spindle diameter: 105 mm, TECHNICAL DETAILS Swing diameter over bed: 1,050 mm Working width: 2,000 mm Working depth: 1,050 mm Max. workpiece weight: 5,000 kg Spindle diameter: 105 mm Spindle bore: 105 mm Spindle speed: 2.24–450 rpm Thickness: 105 mm Distance between centers: 2,000 mm Max. workpiece weight: 5,000 kg MACHINE DETAILS Bdjdpfoy Rxrtex Ammec Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 mm x 1,900 mm x 1,700 mm Weight: 8,000 kg Control: Conventional EQUIPMENT Four-jaw chuck Steady rest

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 16090455, travel distance X-axis: 850 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 210 mm, table width: 500 mm, table length: 1,570 mm, TECHNICAL DETAILS Bodpfxoy Rxq As Ammedc X-axis travel: 850 mm Y-axis travel: 435 mm Z-axis travel: 210 mm Table length: 1,570 mm Table width: 500 mm Main spindle power: 3.8 kW Number of axes: 3 pcs. MACHINE DETAILS Control: CNC Control manufacturer: Heidenhain Power: 16.0 kW Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,800 x 2,300 mm Transport weight: 3,500 kg Transport packages: 3 pcs. EQUIPMENT Tools included External cooling Documentation

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 Bodpfewf Rgfox Ammedc total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: used, capacity 1.000L. all stainless steel double jacket 36 kW tiltable drum stirring system with scrapers electric heating dimensions (l x w x h) : ± 1.900 x 1.900 x 1.800 mm Bsdpoy Nawhefx Ammjdc

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Grain mill grinding turbine Stone mill for cereals, legumes and spices Table machine wood Bjdpsfmcimsfx Ammedc Corundum ceramic grinding stone Output: approx. 100 g / minute Degree of grinding: Infinitely adjustable from very fine to coarse Funnel collection approx. 1.3 kg grain Connection 220V, 360 watts Dimensions: 208 x 242 x 380 mm, WxDxH NEW machine with warranty Visit us at the Milbrandt outlet shop

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 65 h, load capacity: 1,600 kg, load center: 600 mm, fuel type: electric, battery capacity: 150 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, tire condition: 100 %, drive type: Elektro, Low-lift pallet truck Load center: 600 Condition: Refurbished, no warranty Technical condition: very good Front tire type: Vulkollan Front tire size: Brand new Front tire condition: New Rear tire type: Vulkollan Rear tire size: Brand new Rear tire condition: New Battery voltage: 24V Battery capacity: 150Ah Battery manufacturer: 100% remaining capacity Battery type: PzS Battery year of manufacture: 2021 Bdedpszaxicefx Ammsc Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked.

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Bsdpfx Ameq D E Tcjmodc Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Very good condition

Condition: used, mileage: 12,195 km, power: 135 kW (183.55 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,300 mm, first registration: 10/2023, color: white, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, parking sensors, seat heater, sliding door, traction control, = Additional Options and Accessories = - Air conditioning - Rear parking sensors - Front parking sensors - Sliding door on the right side - Android Auto - Apple CarPlay - Automatic headlights - Heated exterior mirrors - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Keyless start - Collision mitigation by braking - Collision warning system - Leather steering wheel - Multimedia capable - Fog lights - Rain sensor - Rearview camera - Headlight assistant - Seat heating - Voice control - Lane keeping assist - Immobilizer - Tachograph - Connected services - WiFi hotspot - Windscreen heating - Partition = Further Information = Availability Reserved: This vehicle is reserved for a customer (subject to sale). General Information Number of doors: 5 Model range: Feb. 2022 - 2026 Cab: single Technical Information Torque: 430 Nm Transmission Transmission: 1 gear, automatic Dimensions Length/Height: L2H2 Dimensions (L x W x H): 553 x 206 x 255 cm Weights Unladen weight: 2,494 kg Bdedex R Tiyspfx Ammsc Payload: 1,006 kg GVWR: 3,500 kg Battery Existing battery: Purchased Battery condition: 99% Charging port: Type 2 Suitable for fast charging: yes Fast charger charging port: Combined Charging System Interior Interior: black Maintenance, History, and Condition APK (Technical Inspection): valid until 10/2027 Number of keys: 3 (2 remote controls) Financial Information VAT/Margin scheme: VAT deductible Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 678 mm, turning diameter: 175 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 330 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 1,040 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,565 mm, total length: 3,799 mm, total width: 2,100 mm, type of input current: three-phase, overall weight: 10,000 kg, spindle nose: A2-6", CNC Lathe Nakamura NTJ-100 TECHNICAL CHARACTERISTICS: Bdedpfx Amoy U Uppemsc Year of manufacturing: 2013 CNC control: FANUC 31i-B-NT-IPS Colour touch screen: 19 ["] Distance between spindles: 910 [mm] Max. cutting diameter: 175 [mm] Max. turning lenght: 678 [mm] Stroke Z1 axis: 1040 [mm] Stroke X1 axis: 330 [mm] Stroke Y1 axis: +/- 40 [mm] Stroke Z2 axis: 678 [mm] Stroke X2 axis: 127.5 [mm] Stroke Y2 axis: +/- 32.5 [mm] B axis swivelling stroke: 182 [°] Rapid traverse rate X axis: 20000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 6000 [mm/min] Spindle nose: A2-6" Max. bar diameter: 65 [mm] Max. spindle speed: 4500 [rpm] Increment C-axis: 0.001 [°] Spindle power: 11 [kW] Counter spindle nose: A2-5" Max. bar diameter counter spindle: 42 [mm] Max. counter spindle speed: 5000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 7.5 [kW] Number of tool stations - Turret 1: 24 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 6000 [rpm] Number of tool stations - Turret 2: 24 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 6000 [rpm] Live tools power: 7.1 [kW] Total power required: 77 [kVA] Supply voltage: 400 [V] Machine dimensions: 3799 x 2100 x 2565 [mm] Weight: 10000 [Kg] More information upon request.

Condition: used, load capacity per storage section: 3,000 kg, total length: 2,700 mm, total height: 100 mm, 1 x Traverse IPE100x50, 2,700mm Condition: used, good condition Traverse length: 2,700mm Height: 100 mm Bearing width: 50 mm Color: green Rated load: 3,000kg Accessories such as: Floor mounting Connectors Load warning signs Bsdpezavg Ejfx Ammodc Impact protection Guardrails Grating Rear panel grating Deep webs Barrier railings and much more... Just ask us! Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are non-binding. Subject to prior sale. - Reservation of ownership: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system X - Travel: 3500mm Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Bdodswycmmjpfx Ammec Spindle Taper: 50ISO/Bt/Mk Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Bsdpfx Ajvwcduemmjdc Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, Manufacturer: KOIKE Type: HD 100 VF Year of construction: 2012 Double driven and double geared Remote control with inverter and vario speeds Tilting 0 - 135 gr Specifications Metric US Standard Table length 1220 mm Table width 1220 mm Table load on 50 mm 5000 Table load to 200 mm 4545 Bodpfsrg A N Nox Ammedc Table load to 400 mm 3500 Table load to 600 mm 2900 Table load to 1,000 mm 1850 Table rotation 360 ° Dimensions (estimate) length 2000 mm width 1600 mm height 1700 mm weight 2400 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2007, Ref. no.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. Bjdpfjzabkvox Ammodc NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: used, - Model: IFA/100 - Flour capacity: 65 kg Bdodpfxow Durij Ammec - Dough capacity (mix): 100 kg - Bowl volume: 145 litres - Power: 5.7 kW - Dimensions (W x D x H): 75 x 120 x 152 cm - Weight: 480 kg - Frame: heavy-duty steel, mounted on wheels - Motors: 2 double-speed motors (one for the spiral, one for the bowl) - Bowl, spiral, central column, and safety guard: stainless steel The pre-owned IFA 100 fixed-bowl spiral mixer is a professional-grade machine designed for craft bakers and pastry chefs who demand performance, durability, and cost-efficiency. Manufactured by ALDEGHERI FORNI, this mixer is renowned for its Italian build quality and long-term reliability. Tjy Tew Duriodxugeb With a 65 kg flour capacity and a maximum dough output of 100 kg, it is ideally suited for medium to large-scale production. The 145-litre stainless steel bowl, along with the spiral and guard, ensures optimal hygiene and easy cleaning. The IFA 100 spiral mixer features a heavy-gauge steel frame mounted on wheels, providing both stability during operation and ease of movement when required. Its two double-speed motors enable efficient and versatile kneading, adaptable to various dough consistencies. The integrated low-voltage (24V) electric control with timers allows precise and safe operation, whether in manual, semi-automatic, or fully automatic modes.

Condition: good (used), mileage: 491,555 km, power: 500 kW (679.81 HP), first registration: 11/2012, fuel type: diesel, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 700 l, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 9,140 mm, total width: 2,550 mm, total height: 3,440 mm, Year of construction: 2012, Equipment: AdBlue, = Additional Options and Accessories = - PTO = Further Information = Technical Information Number of cylinders: 8 Engine displacement: 15,607 cc Front axle: Steerable Rear axle 1: Double tires; lift axle Weights Unladen weight: 12,695 kg Payload: 14,805 kg GVW: 27,500 kg Functional Body manufacturer: HIAB MULTILIFT XR21S61 Pump: Yes Condition Technical condition: good Optical condition: good EURO 5 V 8 500 hp Drive: 6x2 Wheelbase: 480 cm Leaf/air suspension Differential lock Automatic transmission with engine brake Sleeper cab with air conditioning and refrigerator Bjdpfxoy Ua Ans Ammjdc 27MC, radio, telephone Rear and side cameras Hiab Multilift XR21S61 hooklift system Hydraulic container locking Toolbox Trailer coupling We speak German We speak English Hablamos Español

Condition: used, functionality: fully functional, machine/vehicle number: 0000, Year of construction: 2018, load capacity: 10,000 kg, lifting height: 4,970 mm, free lift: 4,450 mm, fuel type: diesel, mast type: duplex, construction height: 4,450 mm, fork length: 2,400 mm, total length: 4,750 mm, drive type: Diesel, construction width: 2,500 mm, Diesel forklift Chassis number: 0000 Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: Refurbished without warranty Bdedpoy Up T Aefx Ammsc Technical condition: Very good Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, full cabin,

Condition: used, x-travel 1.000 mm y-travel 800 mm z-travel 500 mm Control Heidenhain spindle tunring speed 15.000 U/min table dimensions 1.250 x 800 mm number of tool places 30 Pos. In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Bdjdpfoy T Sb Tox Ammsc Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 4,278 h, load capacity: 10,000 kg, lifting height: 5,400 mm, free lift: 1,710 mm, fuel type: diesel, mast type: triplex, construction height: 3,008 mm, fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Bdedpfxov R Nmco Ammsc Mast Type: Triplex Transmission: Hydrostatic Condition: Ready for use and fully functional Technical Condition: Normal Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Super Elastic Rear Tires Condition: 60 - 80% Sideshift, Fork Positioner, 3rd Valve, 4th Valve

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm Bdodjxd Tv Dspfx Ammjc ==== Forces - Retraction force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet ===== Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Condition: new, Year of construction: 2022, pressing force: 100 t, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Bdjdshmi T Uepfx Ammec Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: used, Year of construction: 1998, For sale is a used spotting press from manufacturer Reis, featuring an adjustable pressing force of up to 100 tons. This 4-column press offers a table size of 1600 × 1300 mm, a maximum open height of 950 mm, and is equipped with an ejector in the table, making it particularly suitable for spotting, adjustment, and toolmaking work in mold and die construction. ##### Technical Data & Information: Spotting Press – REIS TUS 80-100 #### General Specifications - Designation: Spotting Press - Manufacturer: REIS - Type: TUS 80-100 - Design: 4-column press Bodpfx Aexd Tiqjmmjdc - Year of manufacture: 1998 - Pressing force: 26–100 tons (adjustable) - Maximum return force: 45 tons - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Max. open height: 950 mm - Overall dimensions (W x D x H): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm #### Hydraulic System - Hydraulic pump: Rexroth SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Max. operating pressure: 200 bar - Pressure accuracy: ±5 bar - Tank oil volume: 215 L - Hydraulic oil: HLP 36 #### Features / Equipment - 180° tiltable ram plate (up to 3 t) - Table ejector (3.5 t / 130 mm) - Oil coupling sockets for core pullers - Digital measuring system - Material feed through ram plate possible (injection molding) - Speed increase #### Control System - Operator panel - Control system: Siemens / Pilz - Functions: - Ram up / down - Tilt ram plate - Extend table - Operate ejector - Adjust pressing force - Control core pull / oil couplings #### Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 7.5 kW - Total connected load: approx. 10 kW (spotting press, tryout press, tool adjustment press, toolmaking press, 4-column press, hydraulic press, REIS press, toolmaking spotting press)

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 06/2020, loading space length: 7,400 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, total width: 2,550 mm, tire size: 435/50R22,5, wheelbase: 4,920 mm, Year of construction: 2020, Equipment: tail-lift, Axle configuration Tire size: 435/50R22.5 Axle brand: GOODYEAR Front axle: Max. axle load: 10,000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle: Max. axle load: 10,000 kg; Tire tread left: 40%; Tire tread right: 40% Weights Unladen weight: 6,260 kg Payload: 13,740 kg Gross vehicle weight (GVW): 20,000 kg Functionality Tail lift: DHOLLANDIA, rear tailgate, 2,000 kg Loading platform height: 110 cm Condition Technical condition: very good Visual condition: very good Further Information Please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos for further information. Bedpfx Amoy Tpdrjmedc = Company information = hello

Condition: used, mileage: 633,000 km, power: 460 kW (625.43 HP), first registration: 04/2016, axle configuration: 8x4, gearing type: mechanical, number of gears: 255, emission class: euro6, Year of construction: 2016, Equipment: air conditioning, trailer coupling, = Additional Options and Accessories = - Rear work light - Front work light - Low-noise operation - Tool box - Power take-off (PTO) - Tow hitch = Additional Information = Front axle 1: Steered Front axle 2: Steered Unladen weight: 23,200 kg Payload: 8,800 kg GVW: 32,000 kg Bodpjy T Ii Tofx Ammsdc