Used Wmt Tool Cabinets for sale (39,574)

Condition: used, Year of construction: 2000, functionality: fully functional, Hydraulic riveting machine for installing self-tapping rivets, Sovereign SO14960 Hfjdpjz Hv Sqofx Ap Ejn Length of rivets that can be installed: 10-18 mm Automatic feed system with a vibrating feeder Pressing force: approximately 1500 kg Cycle time for installing a single rivet: 2.5 seconds

Condition: used, Workshop Drawer cabinet PAROLAI 11 drawers: 3 drawers height 40 mm Hfedoz I Dfuopfx Ap Een 6 drawers height 60 mm 1 drawers height 150 mm 1 drawers height 90 mm Dimensions (L x W x H): 910 x 720 x 1110 mm Weight: approx 150 KG

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Rapid traverse rate: approx. 1400 mm/min Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° - 1 piece tool holder SK 40 with slitting cutter - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition Hedpjz Ebu Ujfx Ap Eofn

Condition: good (used), Year of construction: 1988, total width: 100 mm, total length: 100 mm, total height: 200 mm, overall weight: 13 kg, Eckold tool ECKOLD - FWR 1003/4X MACH-ID 9698 Make: ECKOLD Type: FWR 1003/4X YOP: 1988 Length:100mm Width:100mm Height:200mm Weight:13kg Hfedpfx Aez D Aw Iep Esn Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Available from Q1/2027, or upon agreement. Equipment can be further adjusted to meet specific needs. Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Also available with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, hobbing wheels, skiving tools, and other workpieces and components. Work area: X-axis 700 mm Y-axis 410 mm Z-axis 500 mm C-axis rotation angle 320° X3 auxiliary axis: Optional Work area 600 mm Grinding spindle: Interface HSK 80 E Power 100% 28.8 kW Speed Standard 12,000 rpm Measuring system and feed: Resolution linear axes 0.0001 mm Rapid traverse linear axes 30,000 mm/min Resolution rotary axes 0.001° Speed C-axis 150 rpm Rotary axis: (A-axis SK50) Center height Standard 175 mm Speed as a spindle 1,000 rpm Optional 2,600 rpm Control system: Siemens 840 DSL Tool changer: Double wheel Coolant system: Available upon request Extraction system: LTA Extinguishing system: Kraft & Bauer Dressing unit Hfodpsz Dilfjfx Ap Een Additional accessories/clamping devices from the extensive A. Haas clamping device catalog are possible. Individual, customer-specific training. Includes pre-acceptance at the manufacturer's plant, IBN (Initial Batch Numbering), training, and final acceptance at the customer's site. Financing also available upon request.

Condition: excellent (used), Year of construction: 2014, operating hours: 12,340 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 8,100 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 20 m/min, travel distance X-axis: 380 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 280 mm, grinding spindle motor power: 14,000 W, table length: 500 mm, table width: 330 mm, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Gemini DMR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC 31i B5 Software installed: Quinto Qg1 Colour touchscreen: Yes Number of axes: 5 Stroke X axis: 380 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis: 300 [mm] Max. Stroke speed Y axis: 5000 [mm/min] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 280 [mm] Max. Stroke speed Z axis: 20000 [mm/min] Resolution Z axis: 0.0001 [mm] Table length: 500 [mm] Table width: 330 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 14 [kW] Max. diameter grinding wheel: 250 [mm] Internal workpiece spindle nose: ISO 50 Number of running hours: 12340 [h] Supply voltage: 400 [V] Rated current: 63 [A] Weight: 8100 [Kg] EQUIPMENT INCLUDED: x1 8-position grinding wheel changer x8 coolant supports x1 tool probe x1 FANUC LR Mate 200iC 5L 6-axis tool-loading robot x1 set of robot grippers x1 pallet for robotic tool loading/unloading x3 HEIDENHAIN linear scales on the X, Y and Z axes x1 electrical cabinet air-conditioning unit x1 spindle chiller x1 fire suppression system (to be inspected by the buyer through a qualified organization) Hjdpfx Apsz Hcg Ie Esfn x1 set of 4 lifting brackets x1 set of technical manuals x1 parameter backup on USB flash drive *The SCHUNK collet holder and the 2 grinding wheel holders shown in the photos are not included Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening/grinding tools such as milling cutters, taps and drills. Machines similar to the following brands: Blohm, ELB, Ewag, Favretto, Fenix, GER, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer and Walter. Also consider cylindrical and surface grinding machines, lathes, machining centres and milling machines.

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Hsdezc Izgepfx Ap Eofn Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Item: SK40 tool holders with high-quality tools Scope of delivery: Includes tool holders, chucks, milling cutters, disc milling cutters, indexable inserts, Arno spiral drills with internal cooling, and other items as shown in the pictures. Dimensions & Weights: Installation dimensions L x W x H approx.: 1200 x 800 x 500 mm Weight approx.: 150 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►On request, we can offer transport to the desired location. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. Hjdpfez N Azfjx Ap Esfn ►Technical data subject to change without notice. ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: refurbished (used), total height: 1,050 mm, total length: 850 mm, total width: 620 mm, spindle speed (max.): 2,500 rpm, type of input current: three-phase, grinding wheel diameter: 175 mm, overall weight: 350 kg, rotational speed (max.): 2,500 rpm, grinding spindle motor power: 750 W, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2026, warranty duration: 24 months, For sale: fully overhauled, high-precision Agathon 175-A tool sharpener Hsdpoz R Darefx Ap Eofn Accessories included with the machine: - 2 new Diametal MD16 and D91 grinding wheels - Centralized automatic spindle lubrication - 1 articulated arm LED lamp, CCEA - 1 fixed table - 1 PET rear guard - 1 PET front guard - 1 new electrical unit, CE compliance certificate - 1 frequency converter for adjusting the spindle speed Machine price: CHF 19,900,- (excluding VAT)

Condition: excellent (used), For sale: Hypertherm Powermax 800 D plasma cutter in very good condition. /////Price stated is for 1 unit/////. Hypertherm Powermax 800 plasma cutter Plasma cutter description: The Powermax800 plasma cutting system uses an inverter power supply to provide smooth DC output voltage, ensuring excellent cutting and grooving quality for mild steel, stainless steel, aluminum, and other metals. The Powermax800 power supply provides a constant output current with a variable range from 20 to 50 amps, ensuring optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and pierce metals up to 1 inch (25 mm) thick. Hsdpfjz Sb I Djx Ap Esfn

Condition: excellent (used), Professional collet from the renowned GARANT brand (Hoffmann Group). Model 300230 6 SK40-6-100 – mounting diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Mounting diameter Ø6 mm • Collet length 100 mm Hedpfx Apsz Slfaj Eefn • Maximum rotational speed 25,000 rpm • High precision and stable clamping • Used condition, fully functional, ready for use. -- PRICE INDICATED IS PER UNIT --

Condition: excellent (used), For sale: professional, battery-powered hydraulic crimping tool, Cembre brand, model B15D. The devices are in perfect working order and ready for use. The price is for one unit. The visual condition is as shown in the photos – normal signs of wear and tear from use. Technical specifications: Manufacturer: Cembre Model: B15D Crimping force: 15 kN Power supply: 9.6V / 2.0Ah Ni-MH Professional tool for crimping terminals and connectors Compact and robust design Additional information: Batteries have been refurbished – expiry date 05.2026 Charger not included Crimping tools are 100% functional Sold individually Included in the set: Hfedpfx Ajz Sm Ebep Eon Cembre B15D crimping tool Battery

Condition: used, Year of construction: 1970, Deckel FP1 Tool and Cutter Grinding Machine Tool and Cutter Grinding Machine Deckel Type/Model FP1 Condition Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was inspected and adjusted. A test protocol according to DIN 8615 is available. During the work, the gib strips were also adjusted, and the coolant pump was overhauled. Technical data Travel distances X/Y/Z: 300 / 150 / 340 mm Spindle stroke: 60 mm vertical Tool holder: MK 4 Speed range: 40 to 2,000 rpm, two-stage motor, gear stages Speed stages: 16 speeds Feed: 16 stages: 10 to 500 mm/min Drive power: Two-stage motor approx. 1.0 / 1.4 kW Operating voltage: 380 V / 50 Hz Total connected load: approx. 1.9 kW Clamping area: 600 x 210 mm Hfsdpsz A Tn Iefx Ap Ejn Max. table load: approx. 150 kg Space requirement (W x H x D): approx. 1,100 x 1,000 x 1,500 mm Weight approx.: 750 kg Requested item: Transport costs in an individual offer.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, F729 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6289 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm Hfedpfx Apsu T D Nre Esn >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Bmbwuweo9T3 >> Coolant device >> Operating instructions, spare parts plan To the machine : We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, Technical details: Number of drawer: 6 Stück tool holder: 36 Stück Hodpfx Aeu Nkylep Ejfn Dimensions (HxWxD): 930x710x650 mm weight: ca. 20 kg The trolley is for tool holders SK40 or/and SK50 on sale without tools or taper *

Condition: used, Technical details: Number of drawer: 2 taper: SK40 weight: 362 kg dimensions L x W x H: 0,42 x 0,69 x 0,51 m Very well maintained tool trolley made of pipe construction, screwed with tools (comparable with the pictures) Hfedpfx Apou Nkzpo Eon *

Condition: excellent (used), Year of construction: 2005, Lampertz Doku Data Safe PE12 Data Storage Cabinet Lampertz Doku Data Safe Data Storage Cabinet Drawer for valuables Doku diskette compartment Shelf with slots Hinge side on the right Fire protection class S 120 P according to EN 1047-1 2 hours of fire resistance for documents and paper Resistance class 1 according to EN 1143-1 Year of manufacture: 2005 Hodpol Sl Ihefx Ap Esfn External dimensions Height: 1976 mm Width with hinge: 955 mm Depth including handle: 777 mm Internal dimensions Height: 1714 mm Width: 734 mm Depth: 440 mm Weight: 850 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Article: cam Manufacturer: Schütte For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or Hfsdpfjn H Nzfex Ap Een *

Condition: good (used), Control cabinet with Keyence CV-5501P, CA-DC20E, CA-MP81, CA-D3R, CA-CN3, Rittal SK 3201.300, and Rexroth R911170402-102, as well as Murr Elektronik 54205. CV5501P, CADC20E, CAMP81, CAD3R, CACN3, SK3201.300, R911170402-102, control box, distribution box, distribution cabinet, distributor, cooler, cooling unit, imaging, camera, camera cable. All other installed parts are included in the scope of delivery (see illustrations). Overall dimensions (with Rittal cooler): Width: approx. 45 cm, Depth: approx. 23 cm, Height: approx. 45 cm. Hfedpfxjk S Dazs Ap Een Overall dimensions (without Rittal cooler, only the cabinet itself): Width: approx. 30 cm, Depth: approx. 23 cm, Height: approx. 40 cm. Modules: Keyence CV-5501P digital image receiver, Keyence CA-DC20E expansion unit, Keyence CA-MP81 monitor screen, Keyence CA-D3R cable for LED lighting, Keyence CA-CN3 cable, camera cable, Rittal SK 3201.300 thermoelectric cooling unit (100-watt cooling capacity), Rexroth R911170402-102 Profibus module, Murr Elektronik 54205 module interface. The monitor cover is slightly curved, but it should be relatively easy to reattach (glue). You can find more control cabinets – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Hfsdpfjm E T Ansx Ap Esn Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: used, 7 pieces Hedpjb D Ry Rsfx Ap Eefn Bending tools for a swivel bending machine Length 3000 mm

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climate testing chamber -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R 404A used climate chamber Microprocessor-controlled control and monitoring system SIMCON/32 32-bit technology Graphical display of setpoint and actual values Digital display of setpoint and actual values for temperature and relative humidity (%) Digital input for temperature (°C) and relative humidity (%) Integrated programmer Program memory Manual and automatic operation Fault diagnosis system Hodpfx Aeph U Ayep Esfn Operating hours: 34,303.8 h Year of manufacture: 2004 climate chamber Weiss Dimensions of the test chamber: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm You can find more climate chamber items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 1995, Tool grinding machine Michael Deckel S5 in very good condition Technical data: >> year of construction 03/1995 >> grinding wheel diameter max.100mm >> spindle speed 5600 1/min >> power consumption 1,5KW >> weight 450KG Accessories: Hodpfx Aopr U Etjp Eofn >> Swiveling dividing head SK40 >> div. mountings SK40 To the machine : Offered is a tool grinding machine of the brand Michael Deckel S5. The machine is suitable for grinding high precision parts. The Deckel S5 is in a very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try this machine on site under power.

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Hfedpfx Apjrhzcuo Eon

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm Hjdpfx Apjig A Ere Esfn z-travel // mm total power requirement / kW weight of the machine ca. 950 KG