Used Weinig Hydromat 22B for sale (639)

Year of construction: 2000, condition: excellent (used), Weinig High-Mech A4 bundling system Bundle forming packaging unit possible to combine with other Weinig outfeed handling systems available from stock such as buffers and stackers. Knsdsq Rvrbjpfx Aamoc Consisting of 1. Weinig 815-300 high speed bundling unit 2. Weinig 812-200 outfeed roller conveyor with crossfeed 3. Control panel with Siemens S7-300 CPU

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Kjdpjq Dzi Tefx Aamjnc Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler Kjdpfx Aorhig Ejamonc - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: used, functionality: fully functional, machine/vehicle number: 811.000, total length: 6,000 mm, total width: 3,900 mm, total height: 3,400 mm, type of input current: three-phase, input voltage: 400 V, WEINIG 811.000 Pater-Noster automatic bundle stacking system for timber, in very good technical and visual condition. The machine is designed for fully automatic stacking of timber packages and wooden components onto pallets. The machine features four circulating chain systems with carrying elements, providing automatic transport and stacking of successive layers. The scissor lift is used for depositing the individual layers of the stack. The first layer is deposited in the upper position. The lift then automatically lowers by the height of each subsequent layer until the complete stack is formed. The complete stacking process is fully automatic. The machine can operate with or without stickers/spacers, depending on the customer's requirements and the type of production. The stacker is currently installed, connected to power, and fully operational. The machine can be started and demonstrated while powered during inspection. TECHNICAL SPECIFICATIONS Manufacturer: Michael Weinig AG, Germany Model: 811.000 Year of manufacture: 1993 Type: Pater-Noster automatic stacker Maximum stack dimensions: 5000 × 1000 × 1000 mm Fully automatic stacking process Ksdpfx Asz Ay Drjamjnc Automatic stacking with or without stickers/spacers 4 circulating chain systems Scissor lift for depositing successive layers Scissor lift capacity: 5 t Roller infeed conveyor Chain outfeed conveyor Computer control Comprehensive diagnostic system for detecting potential faults and operating irregularities Power supply: 380 V / 50 Hz CONDITION: Very good technical and visual condition. No corrosion No structural damage Complete conveyor system Fully operational Currently connected to power Demonstration under power possible APPLICATION Suitable for: Sawmills Planing mills Timber processing plants Flooring manufacturers Wooden component manufacturers Glulam manufacturers Furniture component manufacturers ADDITIONAL INFORMATION Additional photographs and an operation video are available upon request. Price: On request / Negotiable

Condition: used, Year of construction: 2016, Used four-sided planer WEINIG Powermat 600 Compact for sale. Ksdpfx Asz Hyvyjamonc

Condition: excellent (used), total width: 1,600 mm, total height: 1,600 mm, total length: 3,600 mm, Weinig Unimat 23C with 5 Spindles. Max width 230mm Max Thickness 160mm Lubrication system for bedplates 4kW feed motor 36m/min No 1.  5.5kw - Bottom 6000rpm No 2. 5.5kw - Right 6000rpm No 3. 7.5kw - Left 6000rpm No 4 . 7.5kw - Top 6000rpm No 6 . 5.5kw - Bottom 6000rpm (possible to add straight jointer here if needed). 50mm precision spindles Beam 0.55kW Full documentation included. 8x top feed rollers 140mm 4x bottom feed rollers (3x powered) Knodpfx Aoz Ezirjamoc Possible to supply with full mechanisation if needed. Very good dust manifold included. 1 set of 50mm tooling included. (Additional 50mm tooling available if needed.)

Condition: used, mileage: 405,040 km, power: 235 kW (319.51 HP), first registration: 11/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2027, color: green, gearing type: automatic, emission class: euro5, loading space volume: 8 m³, loading space length: 6,800 mm, loading space width: 2,400 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, * Sun visor * ABS Ksdpezyzbtsfx Aamjnc * ASR * ESP * Radio * Auxiliary heater * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Fog lights * Sunroof * Driver comfort seat * Seat heating * Differential lock, rear axle * Liftable/steerable axle * Steel bumper * All-round warning light, orange * Air dryer * Trailer coupling * Duomatik air connection * Navigation system * On-board computer * 12-speed * Suspension: leaf spring/air * Payload: 11600 * Continuous brake: electrically controlled engine brake ----Special superstructure: Crane: Hiab XS 166 DS-3 Hiduo, foldable, 3-fold hydraulic extension, fully hydraulic outriggers, radio remote control + floor control, + control panel, 6th and 7th control circuit for rotary servo and grapple operation. Read load chart: Lifts at 2.8m-5.6t, 4.2m-3.8t, 6m-2.6t, 8m-1.92t, 10m-1.5t----Superstructure: Open platform body, raised front panel, hardwood floor, lashing points. Sale only to commercial businesses. IN THE CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase agreements, invoices, pro forma invoices, orders, and sales negotiations.

Condition: used, Year of construction: 2022, operating hours: 431 h, Hamm HD8VV roller, manufactured in 2022, with only 431 operating hours! ----* Manufacturer: Hamm * Type: HD8VV Kedpfx Aasz Rtc Nomonc * Year of manufacture: 2022 * Operating hours: 431 * Kubota diesel engine * Operating weight: 1,590 kg * Power: 16.1 kW * Water sprinkling system * First owner * Good condition * Working width: 80 cm * Transport length: approx. 2,295 m * Transport width: approx. 0.938 m * Transport height: approx. 1.58 m * Video available upon request (WhatsApp Erik) * Price: 12,900 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee; errors and prior sale are reserved.

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, WEINIG NKT Dovetail Grooving Line – Double Unit DP20 An industrial dovetail grooving and gluing machine – developed for maximum precision and efficiency. Technical specifications: Wood input length: min. 130 mm | max. 1000 mm Wood output length: min. 3700 mm | max. 7400 mm (half lengths possible!) Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Dovetail design: Vertical / Horizontal, 10/11 dovetails, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connection power: 80 kW Note: The machine is currently disassembled and is in our warehouse. An inspection is possible by appointment. Scope of supply: Knsdpez E Awqofx Aamsc WEINIG NKT Double Unit DP20 including control unit Integrated gluing station for 2-sided application Operating manual & documentation Hydromat 17B (7 spindles) General information Manufacturer: Weinig AG Model: Hydromat 17B // 7 spindles (various tools) Type: High-performance profiling milling machine / planing and rabbeting machine Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom table, fixed Description Heavy-duty, high-performance planing and rabbeting machine made of vibration-damping and torsion-resistant cast iron components in a modular system. Designed for precise and economical woodworking with high continuous output. Mechanical feed, adjustable in the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long, quick adjustment available. Chip removal for surfacing and jointing spindles, adjustment range 10 mm each. Technical data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustment range of chip removal: 10 mm (surfacing and jointing side) • Machine design: Without counter bearing, in high-performance design

Condition: excellent (used), Blade: Z 6 Cutting circle diameter: 150 mm Bore: 50 mm Length: 220 mm Clamping: Hydraulic Price per piece. Kedpfx Aozxb U Dsamonc

Condition: excellent (used), Blade: Z 6 Cutting diameter: 150 mm Bore: 50 mm Length: 150 mm Knodpfx Aszxb U Rjamsc Clamping: Hydraulic Price per piece.

Condition: used, mileage: 303,850 km, power: 294 kW (399.73 HP), first registration: 04/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, color: white, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, loading space length: 5,200 mm, loading space width: 2,460 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, * Sun visor * ABS * ASR * Radio * Auxiliary heater * Cruise control * Hill start assist * Power windows * Electrically adjustable mirrors * Heated mirrors * Fog lights * Sunroof * Driver's comfort seat * Seat heating * Differential lock, rear axle * Lift/steer axle * Steel bumper * Air intake on top * Air dryer * 2-line air connection * Navigation system * On-board computer * Rear view camera * Digital tachograph * Central locking * Trailer hitch * 16-speed * Suspension: leaf spring/air * Payload: 12710 * Continuous brake: electronically controlled engine brake ----Special superstructure: Crane: Palfinger PK 13001 K-B (Power Links Plus), lifting capacity max. 5460t, foldable, 3-fold hydraulic extension (working height approx. 13m), radio remote control + floor control + elevated platform for remote control, fully hydraulic outriggers, oil cooler, 6th + 7th control circuit for rotary servo and grapple operation. Load chart: lifts 3.3t at 4m, 2.25t at 5.1m, 1.6t at 7m, 1.22t at 9m.----Superstructure: 3-sided pallet tilting body, 2-part aluminum side walls left+right (pivoting+folding, spring-relieved at the front), aluminum rear wall, folding center beam, steel floor, lashing points.----Extremely well-maintained truck. Vehicle always serviced at MAN, last inspection in 06/2026, oil change, inspection, Pro-Check 3 with axle + transmission oil, all filters etc. for €3,639.10. In 08/2025, the major UVV inspection was carried out with all hoses for €11,799.68. The vehicle has no outstanding maintenance. Copies of invoices are available. Knjdjzxi S Depfx Aamoc For sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT+ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations.

Condition: reconditioned (used), LEADERMAC THUNDERMAC 923T SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (22 KW) - RIGHT (15 KW) - LEFT (15 KW) - RIGHT (15 KW) - LEFT (15 KW) - TOP (22 KW) - BOTTOM (22 KW), TOP (22 KW) - BOTTOM (22 KW). WORKING WIDTH: 230 (245) MM, HEIGHT: 160 MM. MAX FEED SPEED 80M/MIN (POSSIBLE TO INCREASE TO 150M/MIN) STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 Kodpfxozv S A Hj Aamenc CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: excellent (used), Year of construction: 2009, LEADERMAC SPEEDMAC 923SP SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (11 KW) - OUTBOARD BEARING RIGHT (11 KW) - LEFT (11 KW) - RIGHT (11 KW) - PROFILE JOINTER LEFT (11 KW) - PROFILE JOINTER TOP (15 KW) - OUTBOARD BEARING BOTTOM (22 KW), TOP (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER BOTTOM (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER WORKING WIDTH: 230 MM, HEIGHT: 160 MM. MAX FEED SPEED 60M/MIN (POSSIBLE TO INCREASE IF NEEDED) STRAIGHT JOINTERS. PROFILE JOINTERS. Knsdpfx Aozv S Ddsamjc CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: excellent (used), Catalog number 7961 TECHNICAL DATA - track width 250mm - roller width 250mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 100mm - table width with clearance 940mm - table length 1700mm - from above: - pawls/ejectors - pressure roller, metal, smooth - roller with saws - pressure roller, metal, smooth 2 pcs - from below: - guide - pawls/ejectors - sliding roller, smooth - track - central lubrication Knedpfx Aaszxqqbjmoc - feed motor 4kW - main motor 37kW - stepless feed speed adjustment - manual body lifting - manual roller with saws lifting - diameter of dust extraction nozzle 200mm - overall dimensions L/W/H of the machine 1800x1500x1700mm - weight 1956kg ADVANTAGES – German made – stepless feed speed adjustment – multi-blade saw, used, very good condition Net price: 22900 PLN Net price: 5326 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Siemens SIMATIC IFP2200 Basic 22" Touch Panel 6AV7862-2BF00-0AA0 Knodpfx Aaezxq Rnemjc Manufacturer: Siemens Product series: SIMATIC Industrial Flat Panel Basic Type: IFP2200 Basic Article number: 6AV7862-2BF00-0AA0 Device type: Industrial Flat Panel Display: 22" Widescreen Aspect ratio: 16:9 Resolution: 1920 × 1080 pixels Operation: Touchscreen Interfaces: DisplayPort / VGA Supply voltage: 24 V DC Front panel protection rating: IP65

Condition: used, Year of construction: 2022, operating hours: 407 h, Equipment: all wheel drive, JCB 1T-2 high-tip dumper, manufactured in 2022, with only 407 operating hours! Kjdpszn Eq Uofx Aamjnc ----* Manufacturer: JCB * Type: 1T-2S5 High Tip Dumper * Year of Manufacture: 2022 * Operating Hours: approx. 407 * High-tip dumper * Power: 16.1 kW * Payload: approx. 1,000 kg * Operating Weight: 1,515 kg * Top condition * Video available upon request (WhatsApp) * More photos available upon request! * Price: 11,900 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp *All information is provided without warranty and guarantee. Errors and prior sale are subject to change.*

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. Knsdpfx Aez N Szhsamjc 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: excellent (used), Year of construction: 2005, We offer a Weinig Super 4 planer in very good condition with EM 15 feed unit, year of manufacture 2005. Manufacturer: Weinig Knodpjylagmjfx Aamoc Model: Super 4 Year of manufacture: 2005 Condition: very good Type: planer If you have any questions or need further information, please send us a message or contact us by phone.

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Knodpfx Aaeu Damdemjc

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Kjdpfx Aasqu Sc Hemjnc Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Knodez Dn R Tepfx Aamjc Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: used, Set of 2x Weinig Powerlock L=270 Z=2 heads Model 536, diameter 93 mm 536.095.25 Top 536.095.24 Bottom Centrolock reversible knife system Z2 Mounting: PowerLock HSK Knodpfoydk Rgsx Aamsc Attention: Price 600 Euro is for a set of 2 pieces

Condition: good (used), With the OptiControl instrument measuring system from WEINIG, you can optically measure drills, PowerLock and hydraulic instruments and transmit the highly accurate measurement results to the woodworking machine. The device's 20x optical magnification ensures accurate measurement results. The measurement results are transmitted to the planer via a computer and the PowerCom software. The machine can also create completely new profiles. OptiControl PowerCom offers you: measuring instruments recording data from measured instruments creating new profiles Online data transmission Knjdpfx Aaeyl Rm Remsc optimization of work tasks time saving when setting up the planerTool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader Ksdpfeypvdisx Aamenc 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt