Used Vectron Vcb 400-115 55Kw for sale (19,335)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) Djdoyuuzdepfx Afkouu • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 425 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 17,000 W, total height: 2,230 mm, total width: 1,800 mm, overall weight: 6,460 kg, controller manufacturer: FAGOR, product length (max.): 5,530 mm, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Range I: 0 - 424 rpm • Range II: 425 - 1700 rpm • Axes • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability Dodpfjybbiujx Afkeuu • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production • A ball screw was replaced about 3 years ago • Accessories: 1 Lynette and various tool holders Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source Dusdezaq Ikopfx Afkju • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Perkins 1204J-E44TTAG2, General information Field of application: Construction Weights Empty weight: 2.527 kg Functional Generator capacity: 115 kVA Dimensions of cargo space: 297 x 115 x 208 cm CE mark: yes Other information Fuel consumption: 20.4 Liter / Hour at 75% Load Generator: Leroy Somer LL3114F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 518 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = Dusdpfxezayxre Afkju - Battery - Control Panel - Steel canopy - Tank = Remarks = EU STAGE 5 Compliant The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: MB400-2026, total width: 2,200 mm, total length: 9,000 mm, total height: 2,200 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 3,000 W, power: 15 kW (20.39 HP), overall weight: 5,500 kg, input voltage: 380 V, installation height: 2,200 mm, MASTER BAG 400 – MODEL 2026 High-Speed Automatic Paper Bag Making Machine The MASTER BAG 400 Model 2026 is a fully automatic high-speed paper bag making machine designed for manufacturers seeking productivity, precision, automation, and sustainable packaging solutions. Combining advanced servo technology, PLC control, and intelligent automation, this machine delivers reliable performance for food packaging, bakery packaging, pharmacy packaging, grocery packaging, retail packaging, and takeaway packaging applications. This Automatic Paper Bag Machine produces high-quality flat and gusset paper bags with excellent accuracy and consistency. It is an ideal investment for companies looking to replace plastic packaging with eco-friendly and recyclable paper packaging solutions. The MASTER BAG 400 serves as a complete Paper Bag Production Line and Industrial Paper Bag Manufacturing Equipment solution, suitable for supermarkets, bakeries, pharmacies, restaurants, coffee shops, delicatessens, food service providers, and retail stores. KEY FEATURES • Fully Automatic Operation • High-Speed Production up to 600 Bags/Min • Servo Controlled Paper Bag Machine • PLC Controlled Paper Bag Machine • CE Certified Design • Heavy-Duty Industrial Construction • Low Maintenance Requirements • Energy-Efficient Operation • Water-Based Glue System • Automatic Web Guiding • Intelligent Tension Control • Fast Job Changeover • High Output Production System TECHNICAL SPECIFICATIONS • Paper Tube Length: 100–450 mm • Paper Bag Width: 50–260 mm • Bag Mouth Height: 15–20 mm • Insert Size: 20–120 mm • Paper Thickness: 40–80 gsm • Production Speed: 100–600 pcs/min • Paper Roll Width: 800 mm • Roll Diameter: Max. 1000 mm • Air Pressure: 0.6–1.2 MPa • Installed Power: 7 kW • Machine Weight: 1700 kg • Dimensions: 4200 × 1500 × 1800 mm STANDARD EQUIPMENT Automatic Unwinding Device, Pneumatic Air Shaft Ø76 mm, Pneumatic Control System, Magnetic Powder Brake, Tension Controller, Web Guide Controller, Feeding Roller System, Water-Based Glue Tray, Bag Forming Device, Mold Fixing Device, Gusset Forming Unit, Printing Registration Sensor, Traction Roller, Precision Cutting Knives, Electric Cabinet, Servo Drive System, Traction Servo Motor, PLC Control System, AC Contactors, and Industrial Sensors. Dujdeu I R Dujpfx Afkeu APPLICATIONS Pharmacy Paper Bags, Bakery Bags, Bread Bags, Sandwich Bags, Snack Bags, Fast Food Bags, Food Service Bags, Fruit & Vegetable Bags, Grocery Bags, Retail Shopping Bags, Takeaway Packaging Bags, Kraft Paper Bags, Eco-Friendly Paper Bags, Sustainable Paper Bags, Recyclable Packaging Bags, Food Packaging Bags, Medical Packaging Bags, Supermarket Bags, Restaurant Packaging Bags, Coffee Shop Bags, Delicatessen Bags, Organic Food Packaging Bags, Custom Printed Paper Bags, and Promotional Paper Bags. INDUSTRIES SERVED Food Packaging Industry, Bakery Packaging Industry, Retail Packaging Industry, Medical Packaging Industry, Grocery Packaging Industry, Restaurant & Takeaway Packaging, Coffee Shop Packaging, Supermarket Packaging, Sustainable Packaging Industry, and Paper Converting Industry. Paper Bag Making Machine, Automatic Paper Bag Machine, High Speed Paper Bag Machine, Food Packaging Machine, Bakery Bag Machine, Pharmacy Bag Machine, Grocery Bag Machine, Sandwich Bag Machine, Snack Bag Machine, Retail Paper Bag Machine, Sustainable Packaging Equipment, Eco-Friendly Packaging Machine, Kraft Paper Bag Machine,

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Djdpjx D E Dyefx Afkeuu Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: used, Year of construction: 2016, Manufacturer : Thimonnier Model : THD 400 Year: 2016 Application: Filling pre-formed pouches or doypacks 4-station rotary turret · Solids & liquids · Atmospheric or vacuum Cycle machine – 4 stations Station 1 – Loading of sachets using a suction arm Station 2 – Opening of sachets (internal forceps + air blast) Station 3 – Filling (solid and liquid dosing) Station 4 – Sealing / closing (atmospheric or vacuum) Product discharge via flat belt conveyor Pouch sizes Max: 300 × 350 × 80 mm Min: 200 × 250 × 50 mm Other sizes available (requires replacement parts) Speed and dosage 100 kg/h (solid product) 4 to 10 bags/min depending on size Solid dosing: bowl/hopper + weighing unit 0.3–2.5 kg Liquid dosing: flow meter Submersible filling available Supply Electrical: 400 V 3-phase + N + T, 50 Hz, 8 kVA Pneumatic: 6–9 bar, 35 m³/h Water: 1–3 kg/cm², 250 L/h, free return General specifications Dimensions: 311 × 302 × 260 cm Weight: approx. 1,000 kg Material in contact with the product: 316 stainless steel Vacuum pump or venturi (vacuum option) Documentation available Video of workshop tests (on request) Full technical dossier (digital version) Djdpfx Afsy Tp D Eekjuu Spare parts

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW PLUS 2 SETS OF LOADING RACK Duedpey D I Nnsfx Afksu

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Dodpszcd Hlsfx Afkouu Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Type: HFE 400 6 L Capacity: 6100 x 400 tons Stroke: 350 mm Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Self-adjusting crowning system in the lower table 450 mm mounted on the floor foundation Dismantling and loading included Dodpoy T Hltsfx Afkeuu

Condition: good (used), The SMT 400 2.4C is a top-class ceramic furnace for continuous operation, designed for a wide range of heat treatment processes. This high-tech device is a vertical convection convection oven that can be used for sintering, annealing, tempering, curing, heat sterilizing, aging and drying a wide variety of items. SMT 400 2.4C operates at temperatures from 350 °F (177 °C) to 2000 °F (1093 °C) and has a capacity of 16 cubic feet (454 l). The oven reaches extreme temperatures quickly and is characterized by exceptional stability Dedpfsq I Sgysx Afkjuu

Year of construction: 1990, condition: used, Used to work with multi-spindle automats Dedpfxsw T Tn Hj Afkeuu Precoat filter oil 2.100 l/min *

Condition: good (used), mileage: 377,609 km, power: 291 kW (395.65 HP), first registration: 09/2015, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 6,120 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, General information Cab: Day Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 295 / 80 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.210 kg Carrying capacity: 13.290 kg GVW: 20.500 kg Functional Crane: HMF 1820, year of manufacture 2004, behind the cab Interior Interior: grey Maintenance APK (MOT): tested until 09/2026 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise Dedeza Hgvopfx Afksuu - Power take-off (PTO) - PTO - Radio - Remote central locking - Speed limiter - Stability control - Toolbox - Visor

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Dedpfxoya Dtme Afkeuu

Condition: used, Year of construction: 2012, operating hours: 7,000 h, Equipment: all wheel drive, New Holland B115C (C-Series, approx. year of manufacture 2012) 110 hp Very good condition Approx. 7000,- Dodpoxnvlvofx Afkjuu

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,277 h, Operating hours: 2277, First registration: 24.05.2022 Year of manufacture: 2022 Approx. operating hours: 2200 Max. lifting capacity: 3,300 kg Max. lifting height: 6,600 mm Max. outreach: 3,500 mm Length to attachment carrier: 4,310 mm Width: 2,100 mm Height: 2,120 mm Total weight with forks: 6,500 kg Total weight without forks: 6,330 kg Engine: 4-cylinder Deutz TCD 3.6 Displacement: 3.6 l, Water-cooled Output: 85 kW (115 hp) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive pump: electronically controlled with variable flow rate Engine: variable displacement motor EPD TOP incl. with optional automatic rpm increase Dujdeupq Tqopfx Afksu Mineral hydraulic oil HVI 46 Transmission: 2-speed, electrohydraulically controlled Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: enclosed cab, split door, 360° all-round visibility GRAMMER air-suspended seat with lap belt ROPS/FOPS certified Heater Front, roof, and rear windscreen wipers Sun blind 4x1 joystick, electronically controlled with capacitive enable, incl. direction control switch Telescopic boom, 2-stage with electronic end-position cushioning (Soft Stop) Attachment carrier quick-coupler system type "ZM2", hydraulically controlled from the cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Drive: permanent all-wheel drive Axles: front axle fixed, rear axle oscillating Braking system: servo-assisted disc brakes on all four drive shafts; automatically applied parking brake when engine stops Hydraulic system: variable displacement pump, "LOAD SENSING" type Work hydraulics flow rate: 125 l/min Hydraulic fan flow rate: 46 l/min Total flow rate: 171 l/min Working pressure: 210 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120A alternator Stabilisation control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual warning, attachment recognition, and overload cut-off Special equipment: Tyres: 400/70-24 158A8 Rear hydraulic connection with separate control EU approval as tractor/agricultural tractor, 40 km/h Tow hitch, height adjustable, self-locking, 30/32 mm pin, incl. trailer lighting connection Air conditioning Boom suspension (B.S.S.) LED beacon on cab roof (approval responsibility of the customer!) LED work lights on cab (2 front, 2 rear) instead of standard halogen headlights 2 work lights at the end of the first arm (main boom) ASCS upgrade: Monitor with all ASCS functions + continuous flow at the front Location: Raiba Üttfeld

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,542 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 570 mm, travel distance Y-axis: 206 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 21i-T, number of axes: 3, This 3-axis Gildemeister CTX 400 Serie 2 was manufactured in 2002. It features a spindle speed of up to 5,000 rpm and a z-axis travel of 635 mm, along with an x-axis travel of 570 mm over the bed. The machine includes a 12-position turret and is equipped with a 3-jaw chuck, chip conveyor, and coolant system. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 Serie 2 machine we have for sale. Contact us for further details. • X-axis travel: max. 570 mm (over bed) / 420 mm (over slide) • Voltage: 400 V • Frequency: 50 Hz • Power capacity: 44 kVA Dedpfx Afszazlyskouu • Rated current: 64 A • Main fuse: 80 A • Control voltage: 230 V (AC) / 244 V (DC) • Spindle hours: 22,542 hours • Feed time: 8 hours 4 minutes • Turret: 12-position turret • Tooling capability: driven tools; C-axis displayed on screen Additional equipment • 3-jaw chuck • Chip conveyor • Coolant system • Workspace lighting • Optional: Tool Holder Package • Optional: Schunk Rota NCD 210-66 three-jaw chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2012, turning diameter 350 mm turning length 650 mm control 840 D SL ShopTurn Siemens greates pass round over bed 385 mm Swing dia. over traverse guideway 350 mm turning speed range - main spindle 0 - 4.500 min/-1 power capacity - main spindel 11,5 / 8 kW max. Torque 340 Nm spindle diameter in front bearing 130 mm spindle bore 87 mm bar material dia. max. 65 mm max. chucking diameter 250 mm spindle head 170 h5 number of toolpositions 12 pos. Shank diameter DIN 69880: 30 mm Number of driven toolspositions 6 pos. Spindle speed - driven tool stations max. 4.500 min -1 power capacity driven tool-stations 5,5 kW x-axis 255 mm z-axis 800 mm tailstock 680 mm taper of center MK 4 clamping capacity 6,8 kN feed speeds 0 - 30.000 mm/min rapid traverse ( X / Y / Z ) 30 / - / 30 m/min Feed force ( X / Y / Z ) 4,5 / - / 6,2 kN total power requirement 28 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC Universal Lathe GILDEMEISTER - NEF 400 V3 - C-Axis - Tool-Drive Dujdpfxey E Tvve Afkeu - only ca. 8093h Spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI tool holders - incl. 8x tool holders - incl. 4x driven tools (2 radial, 2 axial)

Condition: used, mileage: 74,000 km, power: 92 kW (125.09 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,600 mm, loading space length: 3,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Now chat via WhatsApp: Contact our sales advisor quickly and easily. Djdpfx Aoy Ain Nefksuu Attention !!! Preferential sale to business customers only. Internal ID number: [3269] ----Optional bookable: * 12–64 months warranty (valid throughout the EU) * New inspection * New MOT & emission test * Nationwide delivery * Financing available even without a down payment * Tow bar / reversing camera retrofit available on request! * Spring Offer: On request and for an additional price of only €999, increase the towing capacity to up to 3,500 kg (vehicle- and manufacturer-dependent). ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Immediately operational * Euro 5 emissions standard * High roof + long wheelbase * Tow bar: 2,500 kg * Air conditioning * Reversing camera * On-board computer Special equipment: Rear wing doors without glazing (opening angle 270 degrees), sliding door in cargo/passenger compartment right side with glazing. Additional features: Storage compartment with footwell lighting, overhead storage shelf, driver airbag, audio controls on the steering wheel, audio system: radio with CD player and Bluetooth, electrically adjustable and heated exterior mirrors, on-board computer, integrated sunglasses holder in headliner, COMFORT design and trim line, tachometer, rear parking sensors, electronic brake force distribution (EBD), driver assistance system: hill-start assist, rear window package, body type: high-roof box van, fuel tank: 105 liters, height-adjustable steering column, engine 2.3 liters – 92 kW dCi diesel, rear fog lamp, wheelbase 3,682 mm, full-size spare wheel, low emission as per Euro 5 standard, gear shift indicator, front mud flaps, front side airbag, cabin seating: double passenger seat, 12V socket in cargo/passenger area, partial glazing, heat-insulating glazing with UV protection. ----Interested in leasing or financing? We offer attractive terms – also with no down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information online is non-binding and intended only as a general description of the vehicle. Errors, typos, and prior sale reserved. The binding condition of the vehicle is defined solely by the purchase contract executed on-site or confirmed in writing. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to business customers.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Ideal for building demolition shears, scrap shears, and branch shears -Connections via the piston rod -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm Dusdpfxeb A Hufe Afksu -Total length extended: 1800 mm -Ideal for machines where the piston rod needs to be protected. -Quantity: 6 pieces available -Price: per piece

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Dsdpeya Az Nsfx Afksuu Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, total height: 2,750 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION : x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Dsdpfx Afeya Dz Rsksuu The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: excellent (used), operating hours: 50 h, functionality: fully functional, total height: 2,400 mm, load capacity: 600 kg, construction height: 2,400 mm, year of last overhaul: 2024, DGUV certified until: 07/2027, total width: 1,100 mm, total length: 1,175 mm, lifting height: 1,500 mm, input voltage: 400 V, Boiler lifting tipper Diosna model: HK 115 For planetary kettle stainless steel Dusdpfxed Rxn Ro Afkeu 2 dumping heights DGUV V3 tested Connection 400V, 16A-CEE plug Used machine cleaned and tested with 6 months warranty

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: • Easy operation Dedjyrgu Repfx Afksuu • Multi-function display • Various welding processes can be selected: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, mileage: 226,589 km, power: 427 kW (580.56 HP), first registration: 05/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 5,350 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 11,510 mm, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Remote central locking - Refrigerator - LED headlights - Leather interior - Alloy wheels - Air suspension - Tow hitch - Radio - Rear view camera - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Stationary air conditioning - Toolbox = Notes = Scania S580 V8 8x4-4 Full air suspension. Retarder. Trailer coupling. Adaptive cruise control. Leather seats. Heated and ventilated driver seat. Parking heater. Parking cooler. Loading box with stacker holes. Lashing eyes. Anti-slip floor All around stainless steel boxes Loading space: 555 cm x 254 cm. Loading height: 112 cm. Fassi F1150RA.2.28 6 x outrigger. Winch. 8 x hydraulic extension. Fly jib: L616 JDP 6 x hydraulic extension. 1 x manual extension. 4.05 m - 22,000 kg. 4.45 m - 20,220 kg. 6.05 m - 14,680 kg. 7.70 m - 11,330 kg. 9.45 m - 8,990 kg. 11.50 m - 7,210 kg. 13.55 m - 5,980 kg. 15.70 m - 5,080 kg. 17.70 m - 4,470 kg. 19.70 m - 4,000 kg. Fly jib 22.60 m - 2,170 kg. 23.90 m - 2,015 kg. 25.30 m - 1,875 kg. 26.65 m - 1,500 kg. 28.20 m - 1,240 kg. 29.80 m - 1,000 kg. 31.50 m - 845 kg. Manual extension. 33.35 m - 525 kg. = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inner: 20%; Tire tread depth left outer: 20%; Tire tread depth right inner: 20%; Tire tread depth right outer: 20% Rear axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 3: Tire size: 385/55R22.5; Steered Weights Dujdpfx Afezap Iiekju Unladen weight: 31,415 kg Payload: 6,585 kg GVW: 38,000 kg Functional Crane: Fassi Interior Upholstery: Leather Financial Information Price: On request Identification Model number: S580 V8 / 8x4 / FASSI 115 t/m CR = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). We speak Russian. We strive to provide accurate information, but no rights can be derived from the information provided.