Used Vecchiato Multiplatens Press for sale (12,036)

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, tiltable vacuum press with a pressing area of 3,500 mm x 1,420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press will be powder-coated in RAL 7012 and RAL 7035 finishes. Special colors are possible upon request but must be discussed beforehand and may incur additional costs. Welded table construction for professional use, mounted on a tiltable transport cart, equipped with 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be tilted to save space and locked in place, reducing its depth to 800 mm. The tabletop consists of a 22 mm thick laminate MDF board, covered in the pressing area by a slotted vacuum distribution plate made of MDF. Membrane frame opening is supported by 2 gas pressure springs mounted on the sides of the machine. Equipped with a natural rubber membrane, 2 mm thick, with 780% elasticity and temperature resistance up to 70°C, fastened using a clamping system for efficient membrane changes. The continuous sealing of the pressing chamber is achieved via a sealing profile in the membrane frame. Oil-lubricated rotary vane vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks, providing a total capacity of 200 liters. The evacuation and venting of the pressing chamber is carried out via a 3-way ball valve at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, you may opt for initial setup and a brief instruction session by one of our staff members. Should you wish to take advantage of this service, we will be happy to provide an additional quote. Summary of key features: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elasticity: 780%, very high recovery properties, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h oil-lubricated - Maximum negative pressure: -0.99 bar - Maximum pressing pressure up to 9.9 t/m² Pjdpfeywpt Iox Ampepr - Power supply: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locking mechanism - Additional 13 mm vacuum connection - Pressing area: 3,500 x 1,420 mm - Table height to vacuum distribution plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1,030 mm - Installation dimensions (ready for operation): 3,790 x 1,700 x 2,150 mm (LxWxH) - Installation dimensions (tilted): 3,790 x 800 x 1,750 mm (LxWxH) Customs tariff number: 84659400 Net weight: 570 kg Gross weight: 660 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 1993, AMADA MODEL ITS2 50-20 Ppsdepygydepfx Amper 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 4 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1993 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), lathe pressing tool, roller block, support roller -Support roller: solid design -Roller: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm -Quantity: 1x roller stand available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/pc. Ppjdpewvfwgsfx Ampjr

Condition: excellent (used), Year of construction: 2004, specification 150 TONS X 4000 4 AXIS CNC HYDRAULIC DOWN STROKING PRESS BRAKE COMPLETE WITH FULL LENGTH TOP AND BOTTOM TOOLING INCLUDING A BOTTOM MULTI VEE BLOCK description TYPE HYDRAULIC DOWNSTROKING BENDING LENGTH 4000 BENDING PRESSURE 150 TONS CONTROL CYBELEC DNC 60 NO OF AXIS 4 AXIS CONFIGURATION X1 Y1 R MAX SPEED 80mm/SEC STROKE 180 mm GUARDS MACHINE MOUNTED ELECTRONIC GUARDS SIDE AND REAR INTERLOCKED FENCING WEIGHT 11200 KG SERIAL NO. 6150/11324 Podpfxjh N Dqrj Ampjpr MOTOR SIZE 7.5 KW YEAR OF MAUFACTURER 2004

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Ppodpfjy Dfcljx Ampsr Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the Konica Minolta Bizhub PRESS 2250P. Item for sale: 1 x Konica Minolta Bizhub PRESS 2250P with the following equipment: Includes 2x paper decks Includes LS-505 stacker Not the right equipment for you? We can easily configure the machine to your requirements. Please feel free to contact us! Psdpjyamw Uofx Ampspr Meter readings: Total: Approx. 34,784,268 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, controller manufacturer: Bystronic, controller model: Byvision, bending force (max.): 225 t, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, 1 Used High quality fully serviced Bystronic Xact Smart 225/4100 4metre x 225ton hydraulic downstroke cnc pressbrake for sale Pjdpfjyxqzvox Ampspr Xact Smart 225/4100 Make: Bystronic Model: Xact Smart 225/4100 Year / new: 2016 Total axis: 6 – 4axis back gauge X R Z1 Z2 Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 225ton Cnc control: ByVision touch screen

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Bending length: 3100 mm Distance between uprights: 2650 mm Podpowcd Spefx Ampspr Cnc control: DELEM DA 58 Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Motor Power: 13 kW Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm

Condition: good (used), pressing force: 1,250 t, Pressing force: max. 1250 t Podpfsy Ia Sijx Ampjpr Width: 585 mm. height max. 480 mm. Stroke: max. 355 mm. Weight: 7200 kg.

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Ppodsy E N Aljpfx Ampsr Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Ppodpfjy E Nzhex Ampsr Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Podpfx Amsy E Nzbepopr Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Pedey E Ny Ropfx Ampjpr Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Pjdsymn Hwopfx Ampopr Henk Hoos.

Condition: new, Year of construction: 2026, pressing force: 150 t, DURENDUS 150 T Workshop Press – C-Frame Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered according to a specific customer order. We can supply this machine from stock or manufacture a new one for you – gladly taking individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in the workshop and industrial sector. Base price: €6,900 net Options (on request): The listed options are based on completed customer projects and allow for targeted adaptation of the machine to the respective application. The base version represents the basic functional model – in practice, it is most often expanded with additional equipment and configured to suit specific projects. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Adjustable pressure control - Sideways movement of the ram (900 mm) - Bending tool - Anti-twist cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data & Information: ==== General Information Design: Workshop press Pressing force: 150 t (adjustable option) Total weight: approx. 1,400 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,650 mm ==== Working Area Clear width: 1,250 mm Clear depth: 400 mm Daylight: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 230 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Approach speed: 8 mm/s Return speed: 12.2 mm/s ==== Hydraulics & Drive Psdpjy Hrkuefx Ampepr Pump capacity: 20 l/min Motor power: 5.5 kW Hydraulic tank: 34 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Lever control Manual fine tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 6 kW ==== Equipment Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Dual-layer paint finish according to RAL ===== Pressing, removing, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, mounting press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC norms, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for our hydraulic systems.

Condition: new, Year of construction: 2026, pressing force: 120 t, DURENDUS 120 T Workshop Press – Single-column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered on behalf of a customer. We can offer you this machine from stock or manufacture it new – including consideration of individual options. This is a hydraulic workshop press for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €6,450 net Options (on request): The listed options are based on realized customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is most often extended with additional equipment and project-specifically configured. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Pressure adjustment - Lateral movement of the ram (900 mm) - Press brake tool - Anti-rotation cylinder with manual stroke adjustment - V-profile straightening fixture in combination with table plate - LED lighting - Foot pedal - Cooling ==== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 120 t (optionally adjustable) Total weight: approx. 1,300 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,550 mm ==== Working Area Clear width: 1,250 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ppedoy Hqwgspfx Amper Ram stroke: 400 mm Cylinder diameter: Ø 200 mm Piston rod: Ø 125 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.7 mm/s Return speed: 12.6 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbeam with bolt locking Chain mechanism for table adjustment Pressure gauge for pressure display Emergency stop switch CE certification Two-coat paint finish according to RAL ===== Press-in, press-out, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are built in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they also fully comply with the Brazilian national safety directive NR 12, which is based on these standards. Our core strength is in special purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly attractive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 100 t, DURENDUS 100 T Workshop Press – Single Column Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered to a customer as a custom order. We can supply you with this machine from stock or manufacture it new – with pleasure, also taking into account specific individual options. This is a hydraulic workshop press suitable for pressing, straightening, and assembly operations in workshop and industrial settings. Base price: €5,990 net Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine for each specific application. The base machine is a functional standard version – in practice, it is often equipped with additional features and configured project-specific. - Table plate with X-shaped T-slot 650 × 900 × 90 mm - Pressure adjustment Ppedpfx Ajy Hqqasmpor - Lateral displacement of the press ram (700 mm) - Bending tool - Anti-rotation cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling ===== Technical Data + Information: ==== General Information Design: Workshop press Press force: 100 t (optionally adjustable) Total weight: approx. 900 kg Dimensions (W × D × H): 1,600 × 900 × 2,550 mm ==== Working Area Clear width: 1,000 mm Open depth: 350 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,000 / 620 mm Ram stroke: 400 mm Cylinder diameter: Ø 190 mm Piston rod: Ø 115 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.5 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 4.5 kW ==== Equipment Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-layer coating according to RAL ===== Pressing, pressing-out, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed the Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety standard NR 12, which is based on these. Our core strength is custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulic systems mainly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 80 t, DURENDUS 80 T Workshop Press – C-frame Press – 900 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered to a customer-specific order. We can supply this machine from stock or manufacture it new for you – also taking your individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly tasks in workshop and industrial settings. Base Price: €4,990 net Options (on request): The listed options are based on realized customer projects and enable precise adaptation of the machine to the specific application. The base machine provides a functional standard configuration – in practice, it is usually expanded with additional equipment and project-specific configuration. - Table plate with X-shaped T-slot 600 × 900 × 30 mm - Pressure adjustment - Lateral movement of the press ram (600 mm) - Bending tool - Anti-twist cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Footswitch - Cooling ==== Technical Data + Information: ==== General Information Design: Workshop press Pressing force: 80 t (optionally adjustable) Total weight: approx. 800 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working Area Clear width: 900 mm Open depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Usable cross beam width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 180 mm Piston rod: Ø 100 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 7.5 mm/s Return speed: 10.9 mm/s ==== Hydraulics & Drive Pump capacity: 11.5 l/min Motor power: 3 kW Hydraulic tank: 24 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Ppedjy Hqlqepfx Amper Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 3.5 kW ==== Equipment Height-adjustable cross beams with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-coat paintwork according to RAL ===== Pressing, extraction, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, single-column press, assembly press, straightening press, industrial press Looking for a hydraulic press tailored to your application? Contact us for an individual quote. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian National Safety Standard NR 12, which builds upon these standards. Our major strength is custom machine engineering and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses mainly use components from leading European manufacturers.

Condition: excellent (used), functionality: fully functional, stroke length: 310 mm, controller manufacturer: Cybelec, controller model: DNC 1200, working width: 3,100 mm, bending force (max.): 100 t, distance between stands: 2,550 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 7, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, upper tooling, Bystronic 100 ton x 3100 mm PR6. 7 Axis X. R. Z1. Z2. X1 100 mm Extra Daylight & Stroke Hydraulic Crowning Hydraulic Upper Tool Clamping Full Upper & Lower Tooling Ppsdpfx Ajyxhhmjmpsr Cybelec 1200 Colour Graphic Control

Condition: used, Year of construction: 1950, pressure 500 t distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Ppodpfsyutvysx Amper We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Ppjdpfxey Hqz Sj Ampsr Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: new, 0 2750 mm Ppedpfx Amoxmk D Rspjr Working height 2500 mm

Condition: new, Year of construction: 2026, pressing force: 60 t, DURENDUS 60 T Workshop Press – Single-Column Press – 900 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered to a customer. We can supply this machine from stock or manufacture it anew – including any custom options you may require. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in workshop and industrial environments. Base price: €4,550 net Options (upon request): The options listed are based on previous customer projects and offer targeted adaptation of the machine to suit specific applications. The base machine represents a functional standard version – in practice, it is usually equipped with additional features and tailored according to project requirements. - Worktable with X-shaped T-slot, 600 × 900 × 30 mm - Pressure regulation - Lateral displacement of the press ram (600 mm) - Bending tool - Anti-rotation cylinder with manual travel setting - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data + Information: ==== General Specifications Design: Workshop press Pressing force: 60 t (optionally adjustable) Total weight: approx. 750 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working Area Clear width: 900 mm Podpsy Hi D Esfx Ampspr Open throat depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 150 mm Piston rod: Ø 95 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 8 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump capacity: 8.5 l/min Motor power: 2.2 kW Hydraulic tank: 22 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 2.5 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Pressure gauge Emergency stop switch CE certification Dual-layer coating according to RAL ===== Press-fitting, pressing out, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian safety regulation NR 12, which extends upon these standards. Our key strengths are in the field of special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. The hydraulics of our presses primarily utilize components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Workshop Press – C-Frame Press – 700 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered as a customer-specific order. We can supply you with this model from stock or manufacture it anew – with consideration for customized options if required. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in both workshop and industrial environments. Base price: €3,550 net Options (available on request): The listed options are derived from completed customer projects and enable precise adaptation of the machine to the specific application. The basic model provides a fully functional standard specification; in practice, it is most often enhanced through additional equipment and configured according to project requirements. Cross-grooved T-slot table (from 60 t) Pressure adjustment Lateral movement of the ram (from 60 t) Bending tool (from 60 t) Anti-rotation cylinder with manual travel adjustment V-profile straightening block in combination with table plate LED lighting Foot switch Cooling system ===== Technical Specifications + Information: ==== General Data Design: Workshop press Pressing force: 30 t (optionally adjustable) Total weight: approx. 500 kg Overall dimensions (W × D × H): 1,150 × 700 × 2,350 mm ==== Working Area Clear width: 700 mm Clear throat depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 700 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 115 mm Piston rod: Ø 65 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 10.4 mm/s Return speed: 15.3 mm/s ==== Hydraulics & Drive Pump capacity: 6.5 l/min Motor power: 1.5 kW Hydraulic tank: 14 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 2 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Manometer (pressure gauge) Emergency stop switch CE certification Dual-layer coating to RAL standard ===== Pressing, ejection, assembly, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, assembly press, straightening press, industrial press Pedpey Hixcefx Ampspr Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured according to German machinery directives and European Machinery Directive 2006/42/EC, as well as all EC norms and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our core strength is custom machine building and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. Our presses are equipped primarily with components from leading European manufacturers.

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, type of input current: three-phase, overall weight: 350 kg, input voltage: 400 V, total length: 500 mm, total width: 520 mm, total height: 1,200 mm, input frequency: 50 Hz, DGUV certified until: 05/2027, Dough dividing and rounding machine Roll divider Record Semi-automatic, 36-piece Dividing head NEWLY overhauled Ppjdpfx Asuav Itempsr NEW stainless steel blade Dough capacity up to 2100g Includes 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm (W x D x H) Refurbished used machine with warranty + spare parts service Option: ONLY WITH US! New rounding plates Delivery service Stainless steel platform Maintenance contract Service package E-box Instruction & commissioning You will only find a large selection of roll dividers with us!