Used Rod Ball Mill / Rod Grinding Mill For Sand And Mining Beneficiation Plant for sale (29,800)

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Hsdpfeyvau Eex Abkenu

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Hnsdpfsvvkipjx Abkeu

Condition: like new (used), Dimensions: Length: 2000 mm Width: 300 mm Adjustable speed: 0–9.8 m/min Hsdpfx Absz Nhuwjkenu Stainless steel frame!

Condition: used, Year of construction: 1998, charge load 620 liter Outer dia. of work tank 1695 mm tank length (expanded) 3800 mm width of working tank 430 mm speeds 900 - 1485 U/min voltage 400 V total connected load 7,5 kW weight of the machine ca. 1600 kg dimensions of the machine ca. 1,80 x 1,70 x 1,30 m - Serial No.: 18585/98-03 - with continously variable motor speed - with pneumatic separation flap Hnsdpfx Abew Hnr Ioksu

Condition: like new (used), “Pallmann PHPH 16-23 Grizzly” for Sale Also many other manufacturer like: Sandvik-Aubema / Hazemag / Ammann Amaro. Find our complete stock on our website. Manufacturer: Pallmann Type: PHPH 16-23 Grizzly Rotor Dia.: 1.600mm Rotor Width: 2.300mm Electrical Motor: Included Included frame and feeders. Hnjdpoggflyjfx Abkju

Condition: good (used), For sale: an 8-meter conveyor belt, ready for operation. ✅ Length: 8 m ✅ Belt width: 65 cm ✅ Transport can be arranged Hedpsz Abyhefx Abkjnu ✅ Wide selection of conveyor belts available on site Please contact us. We will help you select the right conveyor belt for your needs.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, Concrete paver production for slabs complete production line Hnedpfey Sinnex Abkeu fully automatic rotary table topping press Uni 2000/600/7 fully automatic direct washing system Weser 100/2 molds electrical system/control including pallet production

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Hsdpfx Abjzuz H Sokjnu Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: good (used), For sale: a 16-meter conveyor belt, ready for operation. Hnodpfxez Eax Ss Abkou ✅ Length: 16 m ✅ Belt width: 0.5 m ✅ Transportation can be arranged ✅ Wide selection of conveyor belts available on site We invite you to contact us. We will help you choose the right conveyor belt for your needs.

Condition: like new (used), Year of construction: 2005, I sell the vertical band saw mill Primultini SGD, Year 2005, line almost with zero working hours. Canali carriage mechanic + pneumatic. Compressor with air tank included. Sharpening workshop included. Condition like new. Available immediately. Hjdpfozkb R Nex Abksnu

Condition: good (used), Small sandblasting unit Internal dimensions: 1.2 x 1.2 x 0.6 m (L x W x H) Operating pressure: 8 bar Equipped with extraction system, loading table, and spare parts (see photos) Transport and loading can be organized across Europe for an additional fee upon request. Prices quoted are exclusive of VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? Hnodpfjzvng Usx Abkju For more information or contact options, please reach us via the contact form.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Hnedpfjwc Rk Esx Abkju Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: good (used), For sale: a conveyor belt approximately 6 meters long, ready for operation. ✅ Length: approximately 6m ✅ Belt width: 0.5m Hnodjz Dnrdopfx Abkou ✅ Transportation can be arranged ✅ Wide selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt to meet your needs.

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces -Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos -Adapter: SK50x40x40 Hnjdpfeu Uwwxox Abkou -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 40 kg

Year of construction: 2008, condition: excellent (used), SANDMASTER FG2-20-2-9 Kugelstrahlanlage Hnedpfefcpxujx Abksu Antrieb Vorschub Düse 0,10 kW, Beleuchtung 24 W, Strahldruckbereich 0,5 - 8 bar, Strahlmittelkörnung 0,1 - 0,30 mm, Ventilatormotor 250 W, Filterfläche 1 m2, Druckverlust im Filtergehäuse, Ein - Austritt Total 170-250 Pa, Geräuschpegel mit eingebautem Schalldämpfer 62 dBa, Elektrische Anschluβ-Spannung: Steckdose 3 x 400 V 50 Hz, 16A (3P+N+E), Druckluftanschlüβe: min. 1/4 "Druckluftleitung mit Schlauchnippel für Druckluftschlauch von 13 mm Innendurchmeβer, Erforderliche Druckluftqualität: ISO8573-1. Klaβe 1.7.2, Vorschublänge max. 350 mm,

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x850x1300 mm Hsdpfxovz Hfqo Abkenu Weight 420 kg Total power requirement 4,5 kw

Year of construction: 1989, condition: used, Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible. Hnodjz S Iwkopfx Abkou

Year of construction: 1989, condition: used, Control: Heidenhain TNC 355, operating hours: 69,557h, with accessories. An on-site inspection is possible. Hnsdpfx Ajz S Iwqsbkou

Condition: good (used), Tool holder, milling chuck, collet chuck, milling tool, adapter, clamping unit, tool holder -Manufacturer: Sandvik Coromant / Komet, 57 pieces SK50 clamping units -Various types: see photos, more pictures available upon request -Type/Quantity: see photo parts list Hnsdpfx Aohuf Izjbkou -Price/Sale: complete -Transport dimensions: 600/500/H500 mm Total weight: 210 kg

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Hnedpfxelhqdmo Abksu Available immediately

Condition: used, 5 axis: yes Milling and turning: yes 5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Hodpfx Aogph Rnobkjnu Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle 20-12.000 min.’ – 140 Nm.12.000 RPM 12,5 KW/Max 34kW Swivelling head (CNC controlled) ± 100° Low hours This machine can be inspected under power in our Warehouse Mimu Machine Tools (Italy)

Condition: good (used), We have 2 granulators / shredding mills for sale (the listed price applies to mill no. 2). The machines were used for cutting and shredding plastic, but they can also be used for processing other plastic materials. Both machines are adapted for liquid cooling. -Technical Data (Mill No. 1, square base): Dimensions: 150 x 115 cm / Height: 210 cm Rotor diameter: 36 cm Rotor/blade width: 55 cm Number of blades: 3 (The fixed blades are positioned diagonally; thanks to this configuration, resistance during cutting and shredding is significantly reduced, making the machine's operation much more efficient). Inlet (feed opening): 30 x 53 cm Motor: 22 kW / 30 HP Adapted for liquid cooling ----- Hnsdpfx Abouw Skheksu -Technical Data (Mill No. 2, inclined/pyramid base): Dimensions: 150 x 125 cm / Height: 180 cm Rotor diameter: 25 cm Rotor/blade width: 52 cm Number of blades: 3 Motor: 22 kW / 30 HP Adapted for liquid cooling Prices: Mill No. 1: €7,200 Mill No. 2: €5,900 Price for buying both machines: €11,900

Condition: new, functionality: fully functional, Year of construction: 2025, A double teeth roller crusher is a type of roller crusher commonly used in industries that involve the crushing of various materials, such as mining, metallurgy, building materials, and chemical processing. This crusher is characterized by its two pairs of closely spaced, parallel, and oppositely rotating rolls with "teeth" or "knurling" on their surfaces. The teeth are designed to grab and crush the material, providing efficient and uniform size reduction. Here are key features and aspects of double teeth roller crusher equipment: 1. Double Roller Design: - The crusher features two parallel, counter-rotating rollers, each with a set of teeth or knurling on its surface. The dual roller design facilitates a consistent and efficient crushing process. 2. Teeth Configuration: - The teeth on the rollers are designed to grip and crush the material. The arrangement and shape of the teeth may vary based on the specific application and the characteristics of the material being processed. 3. Adjustable Gap Settings: - The gap between the rollers can usually be adjusted to control the size of the crushed particles. This feature allows for customization of the final product size. 4. Material Feed and Discharge: - Material is typically fed into the top of the crusher and is crushed between the rotating rollers. The crushed material is discharged at the bottom of the machine. 5. High Efficiency: - Double teeth roller crushers are known for their high efficiency in crushing various materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 6. Versatility: - These crushers are versatile and can be used for various materials, including coal, limestone, slag, clay, and other similar materials. 7. Application in Mining and Processing: - Double teeth roller crushers are commonly used in the mining industry for the crushing of minerals and ores. They are also utilized in other industries for size reduction and processing of materials. 8. Dust and Noise Control: - Some double teeth roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. High Torque and Power: Hnjdpfjq Nga Usx Abkou - A powerful motor and a robust drive system are essential components to drive the rotation of the rollers, providing the necessary torque and power for efficient crushing. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Application in Size Reduction: - Double teeth roller crushers are effective in size reduction and are suitable for applications where precise control over the final product size is crucial. It's important to note that the specific design, features, and applications of double teeth roller crushers can vary among different models and manufacturers. When selecting or using this type of equipment, it's advisable to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Year of construction: 1994, condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Hnodoix Ahbspfx Abksu

Condition: excellent (used), Sandvik Varilock Tools Hnedpfx Ajzkcbpsbksu