Used Rittal Sv9343.010 160A for sale (214)

Condition: excellent (used), Autotherm Here we offer a 6-circuit temperature control unit. Without an active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C … +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1 temperature control in the main circuit Includes 6 temperature measurements in the respective supply line Includes 6 temperature measurements in the respective return line Includes 6 flow rate and pressure measurements in the respective supply line Includes 6 flow rate and pressure controls 1 l/min .. 12 l/min and 0.1 bar … 3 bar Includes changeover control Includes frequency inverter-controlled pump in the main circuit Includes 6x 3-way valve Includes 6 additional overflow valves, adjustable from 2 … 12 bar Pre-set to 2.4 bar Includes filling and emptying device For all circuits, common/simultaneous operation Includes 50l integrated tank Includes pneumatic emptying function Includes S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C cold water network. The cooling capacity is 50 kW at a supply temperature of +20°C. This increases the cooling rate in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The dimensions of the basic unit, according to the data sheet, are increased by approx. 0.3 m²) Assembly in a Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, enclosed enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply Supply temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h, continuously controlled For cooling capacity, a cooling medium must be connected! Fsdpfx Aezd Rtyen Nsgf Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale from our location! Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with a series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, easy operation, and high efficiency) in a series resonant circuit and a compact design, with cooling integrated into the generator cabinet. Rittal generator cabinet and GH Induction TC150/2 resonant circuit Voltage 400V, Frequency 50 Hz, Current 56 A, Power 37.5 kVA In like-new condition! Scope of supply: Fjdpozdp H Sofx An Negf Transistor generator, Rittal generator cabinet with cooling, and TC150/2 resonant circuit (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2021, operating hours: 4,393 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, NEW: EMCO EMCOTURN E45 (Year 2021) CNC Lathe – FANUC 0i-TF, 4,393 hours, like new condition! Includes a parts collection device for the removal of finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of Manufacture: 2021 • Serial Number: S4E213351 • Control: FANUC 0i-TF incl. handwheel • Operating Hours: 4,393 hours (see image 263.599 minutes = 4,393 hours) • Machine Type: Single-spindle lathe with parts collection device • Number of Tool Positions: 12-position VDI-30 axial turret with two hole patterns • Condition: Like new, fully functional • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Additional pictures and videos of the running machine will be provided upon request. _____ Item Description For sale is a high-precision CNC turning center, the EMCO EMCOTURN E45, manufactured in 2021, with low operating hours of only 4,393, and in very good condition. Special features: • Control: Modern FANUC 0i-TF control for easy programming, including handwheel • Parts collection device: The parts collection device (parts catcher) of the EMCO EMCOTURN E45 CNC lathe gently transports finished workpieces out of the working area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with a substantial 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical Data: Working area and travels: • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers: 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travels (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power, main spindle: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / Spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two hole patterns • Tool shank according to VDI (DIN 69880): VDI 30 • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for drill rods: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse rate (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Fgsdpjzkhuhofx An Nsf Scope of supply & terms of sale: • CNC lathe EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included. • FANUC operating manuals and machine documentation • Loading by forklift on site is included. The machine is immediately available and can be viewed and tested under power after prior appointment. Subject to prior sale and errors.

Condition: new, Power 15 KW Fgedpovwfhcofx An Nof Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 rpm.Number of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a flow rate of 25 to 350 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. The lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others available upon request. General specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Fodpehga S Defx An Negf Including standard accessories.

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine for sale directly on behalf of the owner. It was delivered in 2026, but due to changed requirements, it will not be used. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose – table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool interface: HSK63-A Speed max.: 18,000 rpm Power: 63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60 positions EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: - Warranty extension + 12 months Fedpfozl Hbcox An Negf - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: excellent (used), Year of construction: 2023, Equipment: CE marking, Nederman dust extraction system / silo dust collector with control unit and compressed air treatment Condition: very good, used for only 2 years from commissioning in 2023 to 2025, then dismantled due to factory closure. Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems. Design: compact steel construction with integrated filter module. Filter cleaning: compressed air cleaning. Mounting type: roof mounting on silo. Application: industrial dust extraction, bulk solids handling, environmental technology. Filter type: cassette dust collector Type: MEP-2-6 Year of manufacture: 2023 Fan manufacturer: Nederman Type: FMZ 620 Year of manufacture: 2023 Power: 3 kW EX-protected Control unit manufacturer: Nederman Type: DFC-08M Article number: 5512680 Year of manufacture: 2023 Pressure vessel manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial number: FA1049979-003 Maximum permissible pressure: 7 bar Fjdpfxoyxvpfo An Nogf Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Compressed air treatment: Camozzi MC202-D00 Maximum inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Maximum temperature: 50°C Electrical components: ABB control / connection housing Design: dust extraction system for silo applications with integrated filter unit and fan. Accessories / Scope of supply: Electrical control cabinet with control unit Compressed air treatment unit with pressure gauge Pressure vessel for pulse cleaning Fan with motor Pipe connection with weather protection grille Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min Fedpowtctyefx An Nsgf feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SEW400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Stock: approx. 29 linear meters – Price is per meter! Type BD2C-3-400-SB3 / 400 Amps – 5-pole – L1 L2 L3 N PE – copper – no aluminum conductors! Rated voltage Ui max. 690V, frequency 50 – 60 Hz Busbar lengths: 17x 3.25m, 1x 2.25m, 5x 1.25m Price per meter includes connectors, end caps, and mounting brackets Fedpfx Aew Etm Ien Negf Feed-in and distribution boxes in 16-32-63-125-250A are available as options Dismantling was carried out by a certified electrician. Busbars are in excellent condition!!!! Please inquire for your required lengths or accessories! In stock, available immediately!!! Attention: 100A, 160A, 250A, and 400A busbars are also available – please inquire!!! ----- Old Klöckner Moeller BD1 system still available! Busbars, elbow sections, feeders, and distribution boxes for the old Klöckner Moeller BD1 / BD 1 system in stock!!! Are you also looking for a crane system?

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, CNC Vertical Machining Center HERMLE B 300 V With Heidenhain iTNC 530 path control Year of manufacture: 12/2010 Travel ranges: X 800, Y 600, Z 500 Spindle speed range: 20 – 15,000 rpm, stepless With the following accessories: Fixed angular table, 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions (SK 40) IKZ 40 bar Chip conveyor Coolant system Manual cabinet door, manual cabinet roof Polycarbonate safety screens Electronic thermal compensation iTNC 530 Electric hand control module HR 410 3D measuring probe Renishaw Fgsdpfx Anezf Ik Es Nef Control cabinet cooling unit (RITTAL) Spindle oil cooler 4 adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2007, power: 55 kW (74.78 HP), Fully functional single-shaft wood shredder - currently in operation in our factory. Including electrical control system (PLC), switch cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Technical data Rotor working length: 1,500 mm Rotor diameter: 485 mm Motor: 55 KW Rotor speed: 100 RPM Rotor knives: 76 pieces concave / 35x35 mm 4-fold rotating cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg Further details on request. Fgjdpfx Anera Ex Es Nef Errors and omissions excepted.

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz Fgedpfx Anex Iwfmo Nof included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Fgjdokvmi Sopfx An Njf Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2022, condition: new, grinding diameter:260 mm grinding length:1000 mm Fodpfog N Nh Dox An Negf centre height:130 mm dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

Condition: used, SIEMENS 6SN1123-1AA00-0EA1 SIMODRIVE LT MODULE INT. 160A Fgodey S Druspfx An Nef Condition: used (functional)

Condition: new, Year of construction: 2008, Storage location number: 100104628 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Connected load kVA: 111 Fgjdpfx Anjzkznbo Nsf RCD: residual current circuit breaker Circuit breaker: 160A/4-pole Weight: 54 kg

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, table length: 10,900 mm, feed length X-axis: 10,200 mm, feed length Y-axis: 1,960 mm, feed length Z-axis: 1,850 mm, planing height: 1,850 mm, planing width: 1,750 mm, spindle speed (min.): 9,000 rpm, WALDRICH COBURG hydraulic double-column planer and grinding machine Control: conventional relay control Operation: original Waldrich Coburg main control panel with buttons, rotary switches, analog displays, and emergency stop Display / Positioning: 2 x HEIDENHAIN POSITIP digital position indicators / positioning aids on the main control panel Additional control units: Siemens SIMATIC HMI KTP700 / KTP400 for grinding support and grinding attachment Partial modernization 2021: approx. EUR 170,000 Ongoing modernizations / retrofits up to 2021 Retrofitted grinding attachment Modernized grinding support Siemens / Lenze drive technology Control cabinet and modernization documentation available Work area Largest planing width / clamping: 1,750 / 1,790 mm Largest travel height: 1,850 mm Total clamping area: 10,900 x 1,500 mm Additionally documented: 2 x 4,750 x 1,500 mm Usable table / length value according to drawing: approx. 10,200 mm T-slots: 7 pieces Fgjdpfxjy Ubn Ss An Nsf T-slot spacing: 210 mm T-slot width: 28 mm Smallest width of cross rail / traverse: 420 mm Cross rail / column / supports Number of cross rails: 2 Number of columns: 2 Cross rail horizontal travel: 1,960 mm Cross rail vertical travel: 250 mm Column horizontal travel: 550 mm Column vertical travel: 1,850 mm Support swiveling: +/- 60° Support folding: +/- 25° Speeds / Feeds Working speed: 5 - 60 m/min Return speed: 5 - 60 m/min Cross planer carriage vertical: 0.1 - 7.5 mm Cross planer carriage horizontal: 0.1 - 15 mm Column carriage vertical: 0.1 - 7.5 mm Column carriage horizontal: 0.1 - 7.5 mm Dimensions / Weight / Connection Space requirement: 22.67 x 3.97 m Height: 3.95 m Weight: approx. 51,872 kg Voltage: 500 V Fuse rating: 125 A Type of current: three-phase Frequency: 50 Hz Grinding support / grinding attachment Grinding support with grinding spindle Guideway system with base and Z-axis Y-axis grinding support converted to ball screw spindle 40 x 10 Pre-tensioned double nut Single-axis control for feed axis Angle gearbox motor 72 Nm Synchronous servo motor 11 Nm with absolute encoder Rittal compact control cabinet Grinding spindle / grinding wheel drive Siemens asynchronous motor grinding spindle 9 kW at 1,500 rpm / 57 Nm 10 kW at 1,750 rpm / 55 Nm Max. speed: 9,000 rpm Siemens SINAMICS drive technology Siemens SIMATIC control unit grinding support / grinding attachment Lenze L-force axis drive for Y-axis grinding support Separate control cabinets for grinding wheel drive and Y-axis grinding support Cooling / Hydraulics Schimpke DK150-V cooling unit Cooling capacity approx. 17.5 kW Cooling medium: oil ISO VG46 Gear pump approx. 135 l/min at 10 bar Pump motor approx. 5.5 kW Transformer 500 V to 400 V Separate hydraulic / unit block available Mechanics / Overhaul Partial overhaul of bed / table, crossbeam with slides Y1 / Y2, Z1-axis planer support and lubrication system Machine bed scraped Bed geometry created Table scraped Guideways reworked Slides Y1/Y2 scraped Strips coated and scraped Steel belt renewed Central lubrication system expanded Scrapers renewed Crossbeam lift repaired Worm shaft, drive shaft center, coupling pieces and roller bearings renewed Bellows X-axis renewed Condition / Equipment Column area newly painted Table and functional surfaces in very good condition Accessories, assemblies and spare parts available

Condition: new, operating hours: 5 h, functionality: fully functional, control cabinet width: 800 mm, control cabinet height: 1,700 mm, input voltage: 400 V, input current: 16 A, type of input current: AC, Equipment: documentation/manual, Individual System L25-2203 cleanCABINET CL 100G-BRP Complete laser system for integration as individual components, consisting of the following modules: - Special item: Low-power laser production Laser system CL100G-BRP, diode-pumped laser Wavelength 1064nm, operating mode: pulsed (ns) Average laser power: P = 100 W +/- 3% Prepared for pilot laser, 19" rack-mount design Comparable to 2003836 Special configuration: 10m fiber length, extended pulses - 2D optics system Stamp 10 for LP lasers (CL12BRP-CL100BRP) Automated 2D optics with connection for back-reflection protection (BRP) and 90° deflection, max. working area: 120mmx120mm (=160mm)/290mmx290mm (F=420mm) Focus diameter depends on the focal length of the optics Included components: 2D optics system Stamp 10 90° connection Control electronics Cable set cleanSTUDIO/cleanCONTROL license for 2D optics (without axis system support) RTC - Focusing lens f=254, fully quartz, High grade, working area approx. 150mmx150mm Minimal focus shift - BG protective glass slide STAMP 10/14 F420 Quick-change slide for mounting on the Stamp14 with locking monitoring - Alignment laser for low-power lasers (LP) (CL12G-CL-500G) The alignment laser allows monitoring the beam incident point on the component surface. Installation in the beam source, coupling into the fiber transmission, wavelength = 660nm, power: P = 0.5 mW (min. 0.2mW, max. 1.0 mW) - Decentralized laser source housing W/L Housing for the CL100 beam source including air-water heat exchanger 2kW, see 3D-CAD file. - GS control cabinet 1-1600 (CL12G-CL100G) Update: 32m cable length Laser housing in control cabinet design, type 1/1600 for low-power laser systems (CL12G-CL100G) consisting of: cabinet frame with Rittal double-bit lock, structural powder coating, RAL 7035S, optional air conditioning Installed on heavy-duty rollers, braked, 250kg load capacity, Fiber/cable feed-through through the roof, power supply via Harting Han6, left side panel, safety circuit "Performance Level D", installation position of laser and fiber outlet variable, emergency stop, key switch for starting and Fedpjzl Slyjfx An Njgf main switch in the front door, tested according to DGUVV3 Dimensions: HxWxD: 1600x600x800mm requires operation visualization, cooling capacity adjusted to the ambient temperature at the installation location WITHOUT AIR CONDITIONING as it is only for accommodating HMI, PC and PL-D technology including PLD technology PLD item as plug-in module (see below or alternatively wired in the control cabinet - BG housing 19" 2U PLD PLD plug-in for safe shutdown of low-power laser systems, installed in 19" housing - 2U for use with laser systems - VS-OPT Ethercat copper (MP/HP 2D) Ethercat interface for mid and high-power (2D) systems - fieldbus interface - 2D interface - Ethercat copper - cleanSTUDIO protocol - IPC 19" 1U - Touch panel standard 17-inch with HDMI+DP-VGA - Keyboard with trackball DE QWERTZ keyboard with trackball (DE)

Condition: used, functionality: fully functional, machine/vehicle number: 1661, Year of construction: 2023, operating hours: 218 h, load capacity: 2,000 kg, lifting height: 12,050 mm, free lift: 4,150 mm, fuel type: electric, mast type: triplex, construction height: 4,650 mm, drive type: Elektro, Reach Truck Chassis number: 1661 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: As new Technical condition: Very good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 48V Battery capacity: 775Ah Battery manufacturer: Triathlon Battery type: PzS Battery year: 2023 Fodpoy Upuyjfx An Njgf Sideshifter, Clear view sideshifter with fork tilt 3rd valve, 4th valve, safety light, interior mirror, joystick, ALS–Active Load Stabilization, LED height sensor, Blue Spot, panoramic mirror, 4-lever fingertip controls, CSC lift height indicator combined with steering angle-dependent stepless speed reduction, 160A DIN Rema connector

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Fsdpfx Ansttah Us Negf Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm Fsdpfx Ansu Ixwio Negf turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Fedpjvvtpxefx An Nogf Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm Fgjdpfx Aew S Efzsn Nsf bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 Fedpfju Idfrox An Njgf feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine xH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. * Fjdpfx Ajytcf Usn Nsgf