Used Pressta-Eisele High-Performance Automatic Sawing M/C for sale (104,476)

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Price: 2,000 Euros Csdpfxjy Tizko Ac Tjhb

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Chodpfx Aoyfgrpsc Teb Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: ready for operation (used), Year of construction: 2021, For sale is the hamburger automatic broiler shown in the pictures.. Automatic baking. The two factory feed belts are missing. According to my idea, I wanted to bake hamburger patties made from fresh meat continuously. Chjdpfjwcguyjx Ac Tob Then I would have packaged the ready-made hamburger meat and frozen it. The fresh meat patties would have been transported to the oven by a feed belt (which is in the picture). After the conveyor table, the chute is still needed, which is not ready. But this production did not take place. The oven and the conveyor belt are in good condition and everything works. But the two machines still need to be coordinated.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. Chodpfx Acef Eknys Teb • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 4.5 m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. Codpfxof Eknrs Ac Tohb • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Type: AKF 250L Motor: 400V, 2.2kW Speed: 2800 rpm Chjdpfx Acezvz Dyo Tob Arbor diameter: 250mm Arbor shaft diameter: 40mm Cutting width: 300mm Cutting depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions (W x H x D): 950 x 1450 x 930 mm

Condition: excellent (used), Year of construction: 2017, Year: 2017 - technically efficient, ready to work – after full service Chedpfx Acsy Naz Ts Tsb - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Condition: used, SCHNELL Automatic Stirrup bender PRIMA R 12 Full revamped “as new”, Up to 12 mm Main Characteristics - Single strand: 6 / 12,7mm - Double strand: 6 / 10 mm - Max bending angle: 180° - Central mandrel diam.: 20 / 50 mm - Max pulling speed: 95 m/mm to 310 m/mm - Max bending speed: 1450°/sec - Bending distance: 1500 mm to 4´-11” - Avg. power consumption: 3 kW/h - Working pressure: 7 bar - 90/100 psi Single strand: 6 / 12,7mm Double strand: 6 / 10 mm Max bending angle: 180° Central mandrel diam.: 20 / 50 mm Max bending speed: 1450°/sec Bending distance: 1500 mm to 4´-11” Avg. power consumption: 3 kW/h Working pressure: 7 bar - 90/100 psi Chedpfx Asymcbiec Tjb

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Paper punching machine (for creating perforations) for WIRE-O spiral binding. The device is designed for continuous operation and heavy-duty use. The machine has 2 tools for punching 3:1 holes, 4x4 mm square. After the holes are punched, the sheets fall onto a collecting table at the end of the machine. Quick and easy tool change (5 minutes). Maximum sheet size for punching: 550x500 mm, minimum 150x150 mm. Power supply: 1.5 kW, dimensions: 2800x1200x1250 mm, net weight: 950 kg. Chedpfozuzxhox Ac Tsb A video demonstrating the machine's operation can be sent upon request.

Year of construction: 1996, condition: used, Hydropneumatic operation Cedpfxsyxpw Ns Ac Tohb Punching force: 50 kN Work hub: 35 mm Overhang: 110 mm Installation height: 140 mm

Condition: used, Year of construction: 1994, The price includes several sets of stamping dies as well as new editions. Chjdpfozqvbcex Ac Tsb

Condition: good (used), Automatic perforator Kugler 340-2R Device in very good condition. Includes perforation tool 3:1 round hole and additional tools. Manufacturer description: Perforation device with a working width of up to 340 mm Device adapted for continuous operation and high loads Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shelf feeder enabling continuous operation After perforation, sheets rotate around a special drum, thanks to which the correct sequence of pages is maintained at the receiving station Possibility of using two-part strips enabling perforation of both books and calendars Perforation up to 3 mm in one cycle Quick and easy replacement of perforation strips Possibility of using strips with / without a recess for the hanger. There is a shaker on the delivery. Maximum working width. 340 mm Format / Dimensions min. 120x105mm Format / Dimensions max. 340x340mm Cedeztpbzjpfx Ac Tjhb Maximum cutting thickness. 3mm Mechanical cycles per minute 80-100 cycles Power supply 380V Weight 1580kg

Condition: used, OTO MILLS Strip Joiner 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills 100% automatic butt-welding unit: GG566 Cjdpeymatvofx Ac Tohb

Condition: refurbished (used), Automatic dough divider and rounder Fortuna Automat A3-30 is a reliable and efficient solution for fast and precise dividing and rounding of dough. This machine processes up to 30 dough pieces per cycle, significantly improving production efficiency and ensuring consistent results. The dough weight range of 32 to 70 g allows flexibility for various bakery products. The machine is equipped with three plates and an automatic head tilting function, making operation easier and increasing productivity. Robust construction and high-quality manufacturing ensure stable operation, long service life and easy maintenance, making this machine ideal for professional use. Technical specifications: Manufacturer: Fortuna Model: Automat A3-30 Machine type: Automatic dough divider and rounder Capacity: 30 pieces per cycle Dough weight range: 32 – 70 g Number of plates: 3 Functions: Automatic head tilting Dimensions: 80 x 70 x 145 cm Weight: 650 kg Chjdpfx Acjy Nbaks Tsb

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Chedpod H Hmhjfx Ac Tsb Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Csdpfxsv Rpx Se Ac Tohb Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: excellent (used), JD Manufacturing 2 x batch fryers with distribution system. with non stick stirring to prevent clusters. all s/s. Chjdpfxjymr Ske Ac Tsb

Condition: good (used), Year of construction: 2008, Built in: 2008 Size: max 320 x 320 mm; min 150 x 145 mm Cover size: max 660 x 320 mm; min 225 x 135 mm Book block thickness: max 65 mm Weight: 2,100 kg Cover thickness: 80-300 g/qm Pile height: max. 150 mm Speed: max 1,350 c/h Type of current: 400/50 V/Hz Overall dimensions: w x h x l 3.610 x 2.910 x 1.80 mm Equipment perfect binder: Cedpfx Acsu R Hxgs Tshb - 4 clamps - milling station with pressing roller - hotmelt spine gluing unit - hot melt side gluing unit - PUR gluing unit - Premelter for PUR gluing unit .

Condition: new, DISPENSA: Automatic strip dispenser for packaging machines Elevate your packaging operations with the DISPENSA, EUROMÁQUINA's innovative automatic strip dispensing system designed specifically for packaging machines. This advanced solution automates the precise insertion of separator strips, significantly enhancing efficiency and safety in your production line. The DISPENSA system offers a cost-effective alternative to fully robotic solutions, delivering superior performance with an optimized investment. KEY ADVANTAGES 📈 Increased productivity: Streamline your packaging process with automated, high-speed strip placement. Chjdpfx Aceyl Um Ij Teb ✅ Enhanced operator safety: Reduce manual intervention in repetitive and potentially hazardous tasks, creating a safer work environment. 💰 Reduced operating costs: Optimize material usage and labor, contributing directly to a more profitable operation. How it works? The DISPENSA integrates seamlessly with your existing packaging machine structure. It features adjustable strip loaders that adapt to various package lengths and strip requirements. Each loader incorporates an automatic dispenser, ensuring precise, one-by-one strip feeding and accurate positioning. Optional quick-change loaders are available for efficient offline reloading, minimizing downtime. The system is controlled via an intuitive HMI panel, allowing for easy parameterization and full synchronization with your packaging machine. Ready to optimize your packaging process? Contact us today to learn how the DISPENSA can benefit your production line. Application: Designed for automatic strip insertion in packaging machines Cost: More affordable than fully robotized systems Full integration & synchronization: It integrates seamlessly with your existing packaging machine Number of loaders: Adaptable, based on maximum package length and the required number of strips per package Longitudinal adjustment: Automatic precise positioning Loader capacity: Up to 250 separators (4mm thickness) Quick change: Optional Dispenser: Automatic feeding and positioning dispenser, supplying strips one by one with precision Control system: On-board pneumatic valve control group User interface: HMI control panel for intuitive parameterization

Condition: used, Year of construction: 2006, Format: 0x0 Equipment: Infeed:Solema Delta ST conveyor belt with cycle memory and accumulation featureContinuous product alignment during transport Turning Station:Programmable product rotation: 90?? left/right and 180??Pressure disc for product positioning during rotationServo-motor controlled with product gap creation function Pallet Elevator:Roller-surface platformCompatible with all standard pallet typesMotorized roller conveyor for stable discharge of complete pallets Automatic Pallet Magazine:Capacity: 6 palletsFlexible pallet type and dimension handlingCompact design Chjdpfx Ajzpzw Hec Tob Automatic Interlayer Feeder:Programmable: placement on empty pallet or at defined layersStraight-cut, wrinkle-free interlayers required Reject Delivery:Integrated stack height control cellsNon-compliant stacks are detected and ejected to prevent counting errors and stack instabilityPrevents faulty stacking before palletizingManual ope Control System:Windows-based touchscreen operating interfaceProgram memory for saving and retrieving jobsAutomatic format changeover via servo motorsNew job data can be loaded while the machine is run Pallet Discharge System:Motorized chain conveyor (length corresponds to one pallet)Discharge height: approx. 130 mm above pallet height

Condition: used, Automatic cutting, brushing & washing, drying, made RSA Entry length: 12.000mm Exit length: 30 - 1.000 mm In packed condition – ready to be delivered. Entry length: 12.000mm Chjdpfxjymarlo Ac Tob Exit length: 30 - 1.000 mm Diameter: 12 - 80 mm

Condition: used, Year of construction: 2008, Format: 530 ?? 350 ?? 300 mm Speed: 1.500 Stapel/Stunde Power: NULL Net Weight: 4.500 kg Cjdpfx Ajzpzw Tjc Tshb Equipment: Feeder Conveyor: Solema Delta ST conveyor belt with index timer and accumulation feature Continuous Product Alignment: Active during transport Turning Station: Programmable product rotation: 90?? left/right and 180?? Pressure disc for product positioning during rotation Servo-motor driven with product gap creation function Pallet Elevator Platform: Roller surface platform Pallet Compatibility: Compatible with all standard pallet types Pallet Discharge: Motorized roller conveyor for stable discharge of complete pallets Automatic Pallet Magazine Capacity: Up to 6 pallets Flexibility: Handles various pallet types and dimensions Design: Compact footprint Automatic Interleaf / Sheet Feeder Programmable: Placement on empty pallets or between designated layers Requirement: Requires straight-cut, wrinkle-free interleaf sheets Reject / Emergency Ejection Station Stack Height Detection: Integrated photocells for monitoring stack height Quality Control: Detects and ejects non-compliant stacks to prevent counting errors and s Control System User Interface: Windows-based touchscreen operation panel Job Memory: Recipe management to save and recall job settings Automated Changeover: Automatic format changeover via servo mot Pallet Discharge System Conveyor Type: Motorized chain conveyor (length corresponds to one pallet size) Discharge Height: Approx. 130 mm above pallet height

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format Cjdpfx Aozpzy Iec Tehb - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: new, Year of construction: 2026, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade Chsdpfomcaawsx Ac Teb • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 Cedpfx Aei D D Efoc Tjhb 70×70 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150