Used Plumbing Aggregate for sale (824)

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Ledpfjygib Nsx Al Ishh Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 139 Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Moulding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar spacing horizontal [mm]: 630 Clear tie bar spacing vertical [mm]: 630 Centre ring diameter [mm]: 160 Min. mould height [mm]: 400 Max. mould height [mm]: 700 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 225 Thread [M]: 24 Multi turntable type: Rotary table Lsdpfx Aeyf Ha Hjl Iohh Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mould weight [kg]: 2,500 Max. mould weight, moving side [kg]: 2,500 Screw diameter [mm]: EE1:30, EE2:25, EE3:25 Max. shot weight [g] PS: EE1:83, EE2:59, EE3:58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection possible at any time by appointment. Free loaded on truck (Butzbach). #Tags: ARBURG | Multi 3K | 630S

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Ljdpfx Ajygiafol Ijhh Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Ljdpjyguk Ajfx Al Ishh Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 600 Turntable thread [M]: 16 Lsdpfx Aoyguhhsl Iohh Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Lsdpjzcr N Ujfx Al Iohh Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: new, functionality: fully functional, Face aggregate top right and left Lodpfxswum Nns Al Iehh suitable for various planing machines

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of axes: 5, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 5-axis FORMAT4 Profit H350 1630 was manufactured in 2018. It features a robust construction with a heavy-duty welded steel frame and dual-driven moving gantry. The machine offers an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. If you are looking to get high-quality CNC machining capabilities, consider the FORMAT4 Profit H350 1630 CNC processing center we have for sale. Contact us for further details. • Working hours: 6,442 h • Condition: Not rebuilt – without warrantyGeneral • Construction: Heavy-duty welded steel frame, reinforced • Gantry: Dual-driven moving gantry • 5-axis simultaneous machining • Control software: WoodFlash CNC • Remote service package via internet connectionWorking area and axes • Working area: X 3000 mm / Y 1550 mm / Z clearance 250 mm • Drives: X helical rack & pinion; Y/Z precision ball screws • Guideways: Linear on all axes • Lubrication: Automatic central systemMain spindle (5-axis electrospindle) • Type: Cardan-joint 5-axis spindle, right-hand rotation • Power: 12 kW (S6), full power around 12,000 rpm • Speed: 1,000–24,000 rpm • Tool interface: HSK F63 • Cooling: Liquid cooling; ceramic bearings with air cooling • Integrated aggregate holder; electrically controlled extraction hood • Max tool weight: 6 kg • Max saw blade diameter: 350 mmTool magazines • Linear magazine: 12 positions, left side of frame; separate aggregate pickup; max tool Ø 250 mm; max tool length 240 mm • Rotary disc magazine: 18 positions on moving gantry; supports drills and aggregates; max tool Ø 250 mm; max tool length 280 mmDrilling unit (DH18 6H 1S) • Vertical spindles: 12 total (7 in X, 5 in Y) • Horizontal spindles: 6 total (4 in X, 2 in Y) • Drilling stroke/depth: up to 70 mm; tool holder size 10 mm; individually controlled spindles • Integrated grooving saw: Ø 120 mm; max body thickness 5 mm; up to 7,500 rpmVacuum and clamping • Console table: 6 consoles with front/rear stops; wireless dual-circuit vacuum; vacuum cup height 100 mm • Pneumatic console locking; programmable pneumatic stops; 4 movable side stops Lodpoy Uyihefx Al Iehh • Reinforced support arms (40 kg each) • Vacuum pump capacity: 90 m³/h @50 Hz; 108 m³/h @60 Hz • Additional vacuum connection for template work • Controlled compressed air for frame clamps • Independent vacuum/air switching per consoleCNC software and control • WoodFlash package: CNC control, tool database (Tecno Manager), program editor, 3D preview, DXF import, CAD functions (rotate/mirror/scale/copy), engraving, pocket milling, parametric and absolute/incremental programming, machining optimization • CNC control panel: Full machine operation, program creation/editing, tool/workpiece management, manual commands, vacuum/air/safety monitoring • Mobile operator terminal: 24" LED monitor, keyboard, mouse, USB • Feed speed control terminal: Manual feed override potentiometer; variable feed during machiningSafety • CE safety system; safety mats (instead of light curtain) • Emergency stop system • Safety fence on left side; door safety monitoring • Vacuum and compressed air monitoring sensors Additional equipment • External enable switch • Protected cable chain system • Additional A and C axis locking system • Tool service kit • Polish software installation package • Polish operating manual • Saw blade changing station on gantry

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of axes: 5, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 5-axis FORMAT4 PROFIT H350 16.30 CNC processing center was manufactured in 2017. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. The machine is equipped with a powerful 12 kW spindle and a dual-driven gantry system, ensuring high precision and efficiency. If you are looking to get high-quality machining capabilities, consider the FORMAT4 PROFIT H350 16.30 machine we have for sale. Contact us for further details. • Working hours: 9,370 h • Construction: Heavy-duty welded steel frame; dual-driven moving gantry • Power/Electrics: 3x400 V, 50–60 Hz • CNC software: WoodFlash suite (control panel, tool database, program editor, 2D simulator, 3D preview, DXF import, CAD functions, parametric/absolute/incremental programming, pocket milling, engraving, sequence optimization, virtual planes, subprograms) • Controls and operator interface: • CNC panel for full machine control • Mobile operator terminal with 24" LED monitor, keyboard/mouse, USB • Handheld feed control (feed override, E-stop, manual feed) • Working area and travels: • Working area: X 3000 mm, Y 1550 mm • Z clearance height: 150 mm • Main spindle (5-axis): • 5-axis electrospindle with Cardan joint, liquid cooled, ceramic bearings, R/L rotation • Power 12 kW (S6), 1,000–24,000 rpm • Tool holder HSK F63 • Max tool weight 6 kg; max saw blade Ø 350 mm • Integrated aggregate holder; electrically controlled extraction hood • Axis and motion system: • Dual-driven gantry • X: helical rack & pinion, hardened linear guides • Y: ball screw, hardened linear guides • Z: ball screw, hardened linear guides • Automatic central lubrication • Tool magazines: • Linear: 12 positions, aggregate pickup; max tool Ø 250 mm, length 240 mm • Rotary (on gantry): 18 positions; max tool Ø 250 mm, length 280 mm • Saw blade pickup station: max blade Ø 350 mm • Drilling and grooving: • DH18 6H 2S drilling head: • 12 vertical spindles (7X / 5Y), 6 horizontal spindles (4X / 2Y) • Drill stroke/length max 70 mm; tool holder Ø 10 mm; individually driven • Grooving saws: 2 blades (1X / 1Y), max Ø 120 mm, body thickness max 5 mm, up to 6,000 rpm • Vacuum and clamping: • Console table with 6 consoles; front/rear programmable stops • Wireless dual-circuit vacuum system; cup height 100 mm • Pneumatic console locking; 4 movable side stops; additional support arms • Vacuum pump capacity: 90 m³/h @50 Hz, 108 m³/h @60 Hz • Additional vacuum equipment: left/right template connections; controlled compressed air for frame clamps; independent vacuum/air control per console • Safety: • CE safety system, light curtain, emergency stop system • Safety fence on left side, door safety monitoring • Vacuum and compressed air sensors • Additional safety mat system Additional equipment • Additional A-axis and C-axis mechanical locking system • Remote service package via internet • Cabinet body generator software (3D cabinet design package) • Service tool kit • Documentation: Polish manuals; WoodFlash installation manual • Additional support arms for consoles Lodpjy Ux Upofx Al Iohh • Included accessories: • 11 vacuum cups FA 140 × 115 × 100 mm • 4 vacuum cups FA 125 × 75 × 100 mmNote: Technical data provided for information only and not binding.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and Cable Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Tandem, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank, right side AdBlue tank usable volume 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Step E - onboard diagnostics Cab color: Signal White Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, ramp mirror on passenger side Front mirror Exterior sun visor LED main headlights Headlamp cleaning system Ledpfx Alox A Nn Ts Ijhh Automatic switching between daytime running and dipped beam Automatic headlight leveling LED daytime running lights, “V-light” Front LED fog lights Static LED cornering light Two LED roof beacons (orange), mounted front of cab roof Cab roof penetrations, both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from steering wheel Roof antenna and CB radio preparation Accessory mounting rail, front Original manufacturer emblems/type designations Emission type plate (Euro...) L-plate (low noise vehicle -96) Flatbed body as steel/welded construction, permanently mounted, low-profile design Length approx. 4,800 mm, width approx. 2,480 mm Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Removable aluminum side boards, Suer brand, height 600 mm, anodized, both sides (right and left) Recessed lashing rings, 2,500 daN and 6,500 daN each side, in profiled slots with flexible positioning 6 stakes pockets per side (3 per side) Hydraulically extendable bed extension, approx. 1,200 mm, hot-dip galvanized, loadable up to 3,000 kg, extendable with lighting and underrun protection, deeply recessed if possible, radio remote-controlled Sturdy front wall consisting of welded frame with recessed stake storage pockets Cladding plates, mudguards in checker plate, sand-blasted and powder-coated and painted in vehicle color Toolboxes between the rear axles with checker plate 5 toolboxes, checker plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space Sand-blasted, powder-coated and painted in vehicle color Installation of underrun protection at the rear and additional outriggers, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20 for twin-line operation with folding sheave and accessories. Infinite slewing range All hydraulic cylinders double acting Piston rods hard chromed Double linkage system with PROLINK (knuckle boom can be over-extended by up to 15°) Electronic overload cut-off system with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency shutoff and optical alarm at 90% and 100% Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (180l) with filter

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 Lhjdpjwmh Hrsfx Al Ijh IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loading Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully enclosed V2A stainless steel Commercial tonnage: 35 t Main wheelbase: 2,980 mm Wheelbase between front axles: 1,795 mm Wheelbase between rear axle and trailing axle: 1,350 mm Exhaust silencer, side-mounted, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side 1-cylinder air compressor, 360 cc, with economy system Pneumatically regulated air processing Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency brake assist Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard light activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 HP) output, 2,650 Nm torque, Euro 6e Heated fuel filter for fuel up to purity class 25 Pre-fuel filter with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as an option for an extra charge) Endless slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double linkage system with PROLINK (overbending articulated arm up to 12°) Electronic overload switch-off with FX900 FASSI stability control FSC including LMB II Lhodewllmaspfx Al Ieh Emergency stop and visual alarm (90% and 100%) Pressure relief and load-holding valves XF System (Extra Fast) + XP System (Extra Power) + FL ? System (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base Hydraulic outriggers, hydraulically extendable on both sides, support width 8.84m Outriggers operable via radio control with proportional control block IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hooks and mounting shackles (short / 500mm) Transport position: folded transversely to the direction of travel Attention: Observe vehicle voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II IE742 connection box Low-profile subframe 180° hydraulically tiltable outriggers / both sides Control system for auxiliary function "winch / xhe-dynamic" Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on articulated arm LED for 2 outriggers, not mounted (crane) LED for 2 outriggers, not mounted (additional support beams) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, engine speed +/-, 6x ON/OFF functions, 10m cable and various operating speed settings, including spare battery, charger, neck and waist belt.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Ledpfx Aox A Nntjl Iehh Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Krone SZK 18 eLB41-LI – Dry Liner Box Semi-Trailer Basic Data • Vehicle type: SZK 18 eLB41-LI • Fifth wheel height, unladen: 1,150 mm Weights (Permissible / Technical) • Kingpin load: 12,000 kg / 12,000 kg • Axle load: 18,000 kg / 18,000 kg • Gross weight: 30,000 kg / 30,000 kg Dimensions • Body dimensions: 13,620 x 2,480 mm (internal length) • Internal height: 2,715 mm • Rear door clearance height: 2,650 mm • Unladen overall height: approx. 4,000 mm • Front construction height: 100 mm (incl. floor) Axles • 2 axles, each rated at 9,000 kg • KRONE axles with air suspension and disc brakes • Brake disc size: 430 mm • Aggregate spacing: 8,135 mm • Wheelbase: 1,310 mm • Warranty: 6 years with unlimited mileage Tyres & Rims • 4x 385/65 R 22.5 M+S • KRONE Smart Tyre Monitoring • No spare wheel Braking System • EBS 2S/2M with ABS • Spring-actuated parking brake • Brake system: WABCO Box Body • Closed body design • Internal forklift impact protection, lateral: 320 mm high • Front wall: steel sheet, interior 9 mm phenolic resin plywood • Rear wall: steel container-type door with seal • LED light strip, left side of loading compartment • 2 ventilation louvres per side • 2 rows of lashing rails (800 mm / 1,600 mm above floor) Floor • 30 mm thick waterproof bonded composite floor • Load capacity compliant with EN 283 up to 7,000 kg forklift axle load Lighting • Full LED lighting • Full LED multifunction rear lights (Hella Gen.2) • LED side marker lights with indicator function • Rear contour brake lights (upper) Certificates • EN 12642 Code XL • VDI 2700 Beverage Transport • Daimler Guideline 9.5 • CEMT/CM certificate Paintwork Ledsvw Hnqopfx Al Ishh • Chassis: RAL 9005 Deep Black • Box body: KRONE White • Roof: RAL 9010 Pure White

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, machine/vehicle number: 2026, Lillnord fermentation retardant Maryline Model: KR 103-81 R Standard Touch screen computer control Temperature range from max. -3°C to + 45°C Humidity from 60% to 90% RH for 1 trolley sheet metal 600 x 800 mm Trolley dimensions: 610 x 810 x 1820 mm, WxDxH Cooling unit ready to plug in above Coolant R 134A / cooling capacity 803 watts PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 400V, 4 kW, 16A-CEE plug Dimensions: 810 x 1030 x 2365 mm, WxDxH New device Option: - Door with thermal window - CO2 vaporizer - Impact protection in stainless steel or PVC - FlexBaker with ready-fermented products Lhsdpfxok Itlrj Al Ioh - Aggregate external Lillnord service partners

Year of construction: 2026, condition: new, functionality: fully functional, Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregate draws the lye from the washing tank and transports it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. Advantage The soiled parts are radiated intensively with the hot lye from all sides in the rotating basket, driven by geared motor. After completing the cleaning process, the device switches off automatically. 1 pump arranged horizontally Specific output: 120 L/min 3 three-dimensional stainless-steel nozzle tubes robust stainless-steel design additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, driven by geared motor steam extraction screen plate with filter inlets made of stainless steel above the wash tank water indicator longer nozzle tube above and below 9 nozzles more than Mini 60 Lhedehct Eajpfx Al Ijh Technical data Tank capacity 80 l Basket diameter 600 mm Capacity 100 kg Temperature min. - max. 0-60 °C Dimensions (W x D x H) 945 x 830 x 1025 / 1640 mm Weight 60 kg Spray rate 7200 l/h Material Stainless steel Power supply 3,9 kW / 400 V / 50 HZ Nutzhöhe 380 mm Pumpendruck 2,4 bar

Condition: used, device 10 spindle diameter 40 und 50 mm engine 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) mitre saw for the production of windows, elements, and doors. Frame-by-frame, series production, or individual parts production with 2 tenon and slot spindles, including Oertli tool set - Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80) mm 3. Second tenoning and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW - Double part package Lsdpfx Asv Ag Tdjl Ijhh - Re-milling package with re-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Unit for edge rounding from below with crosscut saw - Rung support strip - Includes extraction pipe system - Includes Oertli tool set - Further technical data and tool drawings available on request.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2022, total width: 2,480 mm, total height: 3,998 mm, Equipment: ABS, Dimensions and Weight Length: 13620 mm Width: 2480 mm Front wall height: 2550 mm Body height (front): 2900 mm Body height: 2950 mm Tire size: 435 / 50R19.5 Permissible total weight: 36000/39000 kg Payload: 29476 / 30000 kg Aggregate load: 24000/27000 kg Load securing: Certified according to EN 12642 XL, beverage certified Chassis Wheelbase: 1310/1310 Side impact protection Underrun protection AXLE LIFT Starting aid (liftable front axle, MEGA, activated by braking 3 times) AXLES ROTOS SCB suspension system for 19.5" (sliding calipers) Hub odometer (center right) SUSPENSION Air suspension SCB BRAKE SYSTEM Dual-circuit compressed air brake system with standard couplings, steel air reservoirs, EBS 2S / 2M with stability program, EBS power supply via ISO 7638 + CAN, dual-diaphragm spring brake cylinders SUPPORTING JACKS Supporting jacks "Jost" LIGHTING SYSTEM 24V lighting system with double round lights and 1 rear fog light 2 x 7-pole sockets Continuous lamp carrier: white, low profile, LED side marker lights coupled with turn signals, 1 pair of LED position lights, 2 LED reversing lights, separate Ledpjil Eh Ujfx Al Ishh WHEELS AND TIRES Long-haul tires, 6x 435/50R19.5, steel rims, ET 120, protective caps for steel nuts FENDERS Additional pair of straight plastic fenders between the axles Anti-spray mud flaps with Schmitz logo OTHER CHASSIS EQUIPMENT 2 plastic toolboxes with lid holder, insert and drawer Pallet stop, straight on both sides of the outer frame, 19mm high, 2460mm internal dimension, rubber impact protection at the rear 1 extendable access ladder, lashing eyes: 5 pairs 2t and 11 pairs 4t according to EN 12640, tensile force per eye PLATFORM BODY Platform body, 3-part FRONT WALL Front wall with steel corner supports, steel impact protection, 350mm high ROOFING SCB sliding tarpaulin, 180mm Overall height 2480mm, internal width, End rail foldable Rental possible! Subject to prior sale and errors! Sale exclusively according to our general terms and conditions. Important note - Important information: Despite careful checking of all details in our offer, it is possible that errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it provides information for initiating a contract. The information provided here is without guarantee and therefore does not constitute warranted characteristics.

Condition: not inspected (used), Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm Control Weinig PC-Nexus # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW Lsdpjyyqm Ijfx Al Ishh 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: va...

Condition: used, empty load weight: 5,950 kg, maximum load weight: 12,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/1998, loading space length: 7,250 mm, loading space width: 2,490 mm, loading space height: 2,200 mm, total length: 2,550 mm, total width: 3,680 mm, suspension: air, tire size: 385 / 65 R 22,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, tail-lift, Vehicle location: Bovenden, 2 axles, MB axles (disc brakes), lifting and lowering, ABS (anti-lock braking system), side aluminum protective guards, aluminum loading platform, fixed, electric cooling unit. Lhodpfx Asi Rpwyjl Ish Superstructure: Fresh produce transport, Mistral T850 plus unit with approximately 1832 operating hours, loading platform: BÄR 2000kg lifting capacity, extendable drawbar. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Lhsdpjylpwuefx Al Ioh Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: used, Year of construction: 2015, Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 Teilungsdurchmesser: 125,6 mm Ausrichtung der Flaschenteller über Danfoss-Servoantriebe Erkennung von beschädigten oder umgefallenen Flaschen am Einlauf Stoppstern am Einlauf Leimwalzen aus Stahl Vorbereitet für Flaschenausrichtung durch Kameraerkennung Heissleimwerk für Siegeletikett von Robatech Heissleimdüse an der Etikettierstation montiert Siemens S7 Technische Dokumentation vorhanden Lieferumfang Datumscodierer Leimpumpen Unipump H (heizungsgesteuert) Lsdpfx Alov I Tnxe Iohh

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 03/2026, fuel type: diesel, color: grey, gearing type: automatic, number of seats: 7, total length: 7,004 mm, total width: 2,098 mm, total height: 2,321 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, * Exterior mirrors, electrically adjustable and heated * Double passenger seat bench on the right with storage compartment and foldable backrest with folding table * Storage package 2: roof console with two 1-DIN slots and reading light * Leather multifunction steering wheel with Tiptronic * Manual air conditioning in the cab * Central locking system with keyless start, without safe-locking * Fabric seat covers, “Austin” design * 2 USB-C data/charging ports (center console) with increased charging capacity and 2 USB-C charging ports (center, windscreen) * Digital Cockpit Pro * Mobile phone connectivity via Bluetooth with inductive charging function * 4 speakers: 2 tweeters, 2 woofers * Wired & Wireless App-Connect * Distraction and fatigue detection * Hill start assist * Electronic Stability Program (ESP) incl. ABS, ASR, EDS, SWA * Engine start-stop system with brake energy recuperation * Front Assist with warning and braking for vehicles, pedestrians, and cyclists * Multifunction camera * eCall emergency call system (subject to mobile network availability) * Electronic cruise control (GRA) Ledpoy Actlefx Al Ijhh * Speed limiter and "Intelligent Speed Assist" * Front and rear parking sensors * Electronic parking brake * Airbag for driver and passenger with passenger airbag deactivation * Lane keeping assist “Lane Assist” * Traffic sign recognition * Electronic immobilizer * Intermittent wiper system with light and rain sensor * VW brand/class-specific features * 1 wheel chock * 12V power socket in the cab (dashboard) * 2 radio folding keys * 4 steel wheels 6.5J x 16 with 1,200 kg load capacity, in black * Diesel engine 2.0 L / 130 kW (4V) TDI, bi-turbo common rail * 4th diesel engine 2.0L aggregate 03N.G * 4-seat bench in the 2nd row * 8-speed automatic transmission for all-wheel drive 4MOTION * Emissions concept, WLTP3 N1-III, N2//EU6EC * End crossmember in wide design with L = 1,899 mm and H = 258 mm, bolted * All-wheel drive 4MOTION * Fixed tow bar (incl. trailer stabilization) * Ascot grey * Basic assist package incl. “Intelligent Speed Assist” and cruise control * Left exterior mirror, convex, with integrated LED indicator and wide-angle section * Right exterior mirror, convex, with integrated LED indicator and wide-angle section * Battery 520 A (92 Ah) * Standard battery and alternator capacity * Component kit without country-specific construction regulations * Operating approval supplement * Operating voltage 12 V * Rubber flooring in cab * Onboard literature in Polish * Onboard tools and jack * DMZB * Description not found * Three-phase alternator 140 A * 3-point automatic seat belts with height adjustment and electric belt tensioners in front * Rear cab wall without cladding * Cab doors * Chassis with double cab * Vehicle class differentiation -7CP- * Vehicle registration with a permissible total weight of 3.5 t * Reinforced suspension/damping and stabilization * Function control unit * Differential lock * Front axle weight class, weight range 4 * Glove compartment * Rear window * Rear window and dimmable safety interior mirror * Rear axle “standard” * Notification signs for country group 12 * Infotainment with 26 cm (10.4") color touchscreen * Premium interior noise insulation measures * Instrument cluster (km/h), indicators for speed, total/daily mileage...

Condition: used, mileage: 392,000 km, power: 92 kW (125.09 HP), first registration: 08/2013, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 2,820 mm, loading space width: 1,860 mm, loading space height: 1,850 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, !!!!! Cooling defective !!!!! Control unit for cooling aggregate missing !!!!! Cable cut !!!!! Lhjdpsy Iip Rofx Al Ijh 2-seater, power steering, 6-speed manual gearbox, tachometer, power steering, driver airbag, electric windows, onboard computer, electric exterior mirrors, central locking with remote control, Carrier Pulsor 400 cooling aggregate up to approx. -18°C, freezer, power connection, wing doors, side door/right etc. Subject to errors, prior sale, and typographical mistakes. Sale only to traders and for export. !!!! Fg-2983 !!!! Key number 31 !!!!!

Condition: used, Swiveling aggregate, chain width 10 mm Lsdpfjvvku Esx Al Iohh Storage location: Nattheim