Used Oscam Oscam Hsel 100-3 Way Cutting Bench for sale (84,044)

Condition: like new (used), Year of construction: 2020, Like new press brake from Ermaksan Kodpfjzunlhex Adqjdr Type: Power-Bend Pro 3100 135 Capacity: 3100 x 135 tons Delem DA56s CNC control Y1, Y2, and X axes CNC controlled Akas Fiessler laser safety system Amada/Euro clamping system Manual crowning Includes a set of tooling

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Kodszizlqspfx Adqsdr Further questions can be answered by phone.

Condition: excellent (used), functionality: fully functional, stroke length: 215 mm, controller manufacturer: ESA, control type: CNC control, number of axes: 6, Equipment: CE marking, foot remote control, lower tooling, safety light barrier, upper tooling, New ESA Cnc control on our quality used Edwards Pearson 6axis cnc pressbrake for sale Make: Edwards Pearson Kdedoxtpadopfx Adqjr Model:RT 100x3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Upgraded ESa cnc control New / Upgraded Fiessler Guards 4 axis back gauge – z1, z2, x and r axis – 6axis in total Complete with: Crowning Automatic Hydraulic Tool Clamping Machine is in good working condition and includes a full length set of upper & lower Pressbrake tooling

Condition: ready for operation (used), Year of construction: 1997, pressing force: 102 t, overall weight: 9,700 kg, Press brake manufactured in 1997. This IMAL E3A 100/33 features a press force of 100 tonnes and a bending length of 3,300 mm. With a motor power of 11 kW and a machine weight of 9,700 kg, it is designed for robust performance. If you are looking to get high-quality bending capabilities, consider the IMAL E3A 100/33 machine we have for sale. Contact us for further details. Kdsdpfx Adjzrw Hioqjr • Bending length: 3,300 mm • Motor power: 11 kW Technical Specification Bending Length 3300 mm

Year of construction: 2021, condition: new, functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps Kdedpfxjzr Hzis Adqsr MACHINE DETAILS Power: 22 kW Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Speed: 1,470 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – Continuous operation Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Control system Star/delta connection possible Spare parts can be supplied for an additional charge.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, stroke length: 320 mm, travel distance X-axis: 800 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19 MX, working width: 3,150 mm, bending force (max.): 100 t, distance between stands: 2,700 mm, control type: CNC control, degree of automation: automatic, number of support arms: 4, actuation type: electric, For sale is a Mecos Synchro 100/3000 press brake with a working length of 3000 mm. The machine has been hydraulically and mechanically inspected and is ready for operation. Ksdoyrf Sbjpfx Adqodr The machine features axes X1, X2, Y1, Y2, R as well as Z1 and Z2. The entire electrical system has been renewed, including control, servo motors, controllers, and safety PLC. We offer a 1-year warranty on all electrical components. Equipped with a Cybelec control unit supporting both graphical and numerical programming. DXF files can be directly imported into the control system. Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems Ksdpfsyz Dhzjx Adqedr 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: used, Vacuum with pump and 3 suction platesused, good conditionmake Schmalztype PVT-3-SPL-300x100-VE SEG 4vacuum generator ejector SEGoperating pressure 5 barload capacity approx. 90 kgadjustablewith vacuum pump pneumaticsuction plates 3 piecessize 300 mm x 100 mmswivelingspace requirement approx. 1200 mm x 600 mm x 900 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Kdsdovwf D Repfx Adqer

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 99 h, input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 265 mm, operating speed: 145 mm/s, reverse speed: 210 mm/s, table width: 3,100 mm, table height: 890 mm, throat depth: 410 mm, clearance between the columns: 2,600 mm, total length: 4,320 mm, total width: 1,795 mm, total height: 2,630 mm, overall weight: 7,600 kg, Equipment: CE marking, documentation/manual, safety light barrier, Demo Delivery time - in stock price 41000 EUR Pressing force 100 tons Bending length 3100 mm 4 axis (Y1,Y2, X, R) motorsed crowing Stroke 265 mm Distance between walls 2600 mm Throat depth 410 mm Hydraulic drive Lowering speed 210 mm/s Rotational speed 145 mm/s Rear bumper travel in the X axis 750 mm Rear bumper travel R axis 250 mm Table height 890 mm Engine power 7.5 kW Length 4320 mm Width 1795 mm Height 2630 mm Weight 7600 kg STANDARD EQUIPMENT: Hydraulic drive 4 axes (Y1, Y2, X , Z and R) CYBELEC 12 colorful graphic controls - 17" color touch screen - 3D imaging in simulation and production - Suitable for full Windows applications - USB interface and peripheral interface - Support for user-specific applications Rear bumper driven by a servo motor on linear guides and ball screws CNC controlled crowning Top tool EUROSTAMP 1260, H:67, 85° R:08 (set 835mm x length) EUROSTAMP 2067 lower tool, 4 slots V=16-22-35-50mm, 85° H:60 (set 835mm x length) Fiessler AKASam laser safety device mounted on the upper beam Arms supporting the sheet on the linear guide Front and rear laser security system Equipment compliant with CE regulations User manual in POLISH, GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - higher productivity compared to classic hydraulic presses Kodpfx Aef Eytlodqsdr -low energy consumption - compact drive spindle assembly with few individual components Available immediately from stock.

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2108338, functionality: fully functional, stroke length: 210 mm, throat depth: 410 mm, working width: 3,700 mm, bending force (max.): 175 t, distance between stands: 3,200 mm, The machine was in use for only 3 years! The original price was €95,000! TECHNICAL DETAILS Bending force: 175 t Working width: 3,700 mm Stroke: 210 mm Throat depth: 410 mm Distance between columns: 3,200 mm X-axis travel: 750 mm Operating speed: 10 mm/s Return speed: 130 mm/s Kdedpfx Asydc H Todqer Number of axes: 4 Type of crowning: Motorized Backgauge adjustment: CNC-controlled Backgauge: 750 mm MACHINE DETAILS Control system: ESA S660W Dimensions & Weight Dimensions (L x W x H): 5,305 x 2,430 x 2,840 mm Total weight: 9,800 kg Power: 15 kW (20.39 HP) Input voltage: 400 V Input current: 30 A Input frequency: 50 Hz EQUIPMENT CE marking Finger guard Foot remote control Emergency stop switch Upper tool Lower tool Safety light curtain European tool clamping system

Year of construction: 2021, condition: used, NEW PRICE: approx. 110.000€ KR Quantec 6-axis robot incl. KRC4 controller and robot control panel 12m Smart Pad, 3100mm reach, 20Kg payload External axis module for coupled rotary axis, mathematically coupled Kuka ArcTech Basic package Level 2 advanced TouchSense technology to minimize component tolerances Kuka Wiresense module During oscillation, the voltage is measured by the power source and the welding path is the welding path is shifted if the component warps. * Function only for fillet welds Kjdpjwgn Dwjfx Adqsdr incl. Lorch S5 SpeedPulse XT welding unit incl. automatic torch cleaning station *Cutting device *Cutter *Welding cut-off spray

Condition: good (used), Metal cutting Tooling CU 1000 MACH-ID 2981 Type: CU 1000 Year: 2006 Kdodszdipzspfx Adqsr Max. Diameter 300 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Permanent magnetic conveyor belt separator, including frame, belt speed: approx. 1.7 m/s, drive power: 4 kW (complete geared motor, brand new), overall length: approx. 2650 mm, width: 1500 mm, height: 700 mm, belt width: 1000 mm, ideal installation distance: 200-250 mm (max. 300 mm), weight without frame: approx. 3000 kg. Kjdszma Ewjpfx Adqedr

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] Kedpfx Adju E U Tboqodr - Total installed power : 11.5 [kW]

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Kdedpfx Adjxmvnusqer Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system Kdjdpfx Adjzizkyoqsr A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: like new (used), Year of construction: 2017, oil tank capacity: 150 l, Equipment: documentation/manual, Durma AD-S 30100 CNC Hydraulic Press Brake (2017) – 100t x 3050mm Description: For sale is a high-quality, well-maintained, and fully operational Durma AD-S 30100 CNC hydraulic press brake from the year 2017, directly from production. The machine is regularly serviced, extremely precise, and ready for immediate use. Factory Technical Specifications: Year of Manufacture: 2017 Bending Force: 100 tons Bending Length: 3050 mm Machine Dimensions (L × W × H): 4500 mm × 1900 mm × 2900 mm Machine Total Weight: 8500 kg Hydraulic Oil Capacity: 150 liters Operating Hours: [10051] hours Kjdpfx Aezd U Tdedqodr Equipment and Features: CNC Control: Modern, large-sized graphic touchscreen controller (Delem / Durma) on a swiveling console, with 2D/3D bending simulation. Axis Configuration: CNC-controlled Y1, Y2, X, and R axes. Crowning: CNC-controlled automatic table crowning system for uniform bending angles across the entire length. Safety: Factory-installed, premium laser hand and finger protection in the work area. Accessories: The upper bending die (punch) and lower die/matrix system shown in the pictures are included with the machine and are part of the price. The machine can be inspected and tested in operation at our facility by prior arrangement. The buyer is responsible for arranging transport and dismantling. Asking Price: 45,000 EUR + VAT Location: [City / Hungary]

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, KraussMaffei KM 1300 MX – SP 8100 / Screw Ø105 mm Clamping Unit 1. Clamping force: 13,000 kN / 1,300 t 2. Mold opening force: 910 kN 3. Moving platen force, opening/closing: 159 / 153 kN 4. Platen dimensions: 2,150 × 1,910 mm 5. Distance between tie bars (H × V): 1,550 × 1,250 mm 6. Opening stroke: 2,350 mm 7. Mold height min./max.: 700 / 1,400 mm 8. Maximum daylight: 3,050 mm 9. Ejector stroke: 350 mm 10. Ejector force forward/backward: 250 / 125 kN 11. Optional increased mold height min./max.: 950 / 1,650 mm 12. Daylight with increased mold height: 3,300 mm Injection Unit – SP 8100 Screw diameter: 105 mm 1. L/D ratio: 23 2. Maximum injection pressure: 1,778 bar 3. Stroke volume: 4,546 cm³ 4. Shot weight PS: 4,137 g 5. Injection flow rate: 805 cm³/s 6. Screw speed nominal/max.: 126 / 159 rpm 7. Plasticizing rate PS at nominal speed: 147 g/s 8. Plasticizing rate PE at nominal speed: 116 g/s 9. Plasticizing rate PS at maximum speed: 187 g/s 10. Plasticizing rate PE at maximum speed: 147 g/s 11. Nozzle contact force: 166 kN Electro-Hydraulic Equipment 1. Pump motor rated power: 110 kW 2. Installed heating capacity: 59 kW 3. Barrel heating/control zones: 7 4. Dry cycle rate according to Euromap 6: 761 cycles/h 5. Dry cycle time according to Euromap 6: 4.7 s 6. Oil tank capacity: 1,500 l Dimensions & Weight 1. Net weight incl. control cabinet: 77 t 2. Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m 3. Maximum mold weight: 29,000 kg With Electric Screw Drive Kedpfoztpkpex Adqjdr 1. Screw drive power: 117 kW 2. Screw speed nominal/max.: 123 / 193 rpm 3. Plasticizing rate PS nominal: 144 g/s 4. Plasticizing rate PE nominal: 114 g/s 5. Plasticizing rate PS maximum: 226 g/s 6. Plasticizing rate PE maximum: 178 g/s With Accumulator (ZE) 1. Injection flow rate: 1,732 cm³/s Equipment: 1. Removable tie bar (rectable tie bar) 2. Euromap 67 for robot 3. 48 Hotrunner controllers 4. 8 pneumatic cascades 5. 6 hydraulic cascades 6. 2+2 cores 7. MC 6 controll panel Material used: PP, PC

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 1 - 1000 Top for Solid Wood - New machine - immediately available from stock Bitburg - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Kdedpjxyl Epefx Adqsr Motorized height and tilt adjustment Large safety hood Double roller carriage, 3,200 mm Scoring unit-ready Rip fence, cutting width 1,000 mm Angle/miter fence 3,450 mm, without length compensation Table extension/widening: Powder-coated surface Saw blade tilting range: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade diameter: 450 mm Display size: 15 inch Working table height: 910 mm Extraction port diameter: 80 + 120 mm Options included: M45102 Rip fence 1000 mm Digit_X Location: ex-stock 54634 Bitburg - immediately available -

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Kdjdpfszukkgox Adqer Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Tank capacity (litres) 100 Kdedpfjvpfhyjx Adqsr Motorized pumps Up to 2 external each tank Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Condition: good (used), Year of construction: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Workpiece feeder stroke: max. 630 mm - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW Kjdpfxjzvfpgo Adqjdr - Machine weight: 12,410 kg Transport and loading can be organized throughout Europe at an additional cost, upon request. Prices plus VAT Inspection is possible by appointment. Please contact us, our team looks forward to assisting you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality, yet affordable machine for your production? Or do you wish to sell yours? For further information or contact options, reach us via the contact form.

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Kdedpfeyym Rpsx Adqor

Condition: ready for operation (used), Year of construction: 2019, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg Kdjdpfx Aozvm Azsdqer

Condition: used, pressure 100 t chamfer lenght 3000 mm distance between columns 2550 mm Kedpeyqwbxsfx Adqjdr stroke 150 mm total power requirement . kVA Number of working hours . h weight of the machine ca. 8,3 t Back gauge 400mm Throat 250mm Speed: 8mm /S kW: 6,5 Volts: 380 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team