Used Okuma Multus U4000 2Sc 1500 for sale (4,898)

Condition: used, Planetary mixer Skako 2250/1500 1,5cbm with: - skip Gsdpfxsz Nf Uuo Aivjkc - cement weight - water dosing - additive dosing

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL Gkjdpfx Aisuxfu Novec - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm total power requirement 5,5 kW 500mm grinding wheel diameter New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) Godpfx Aiouwv Idjvjkc -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: ready for operation (used), Edmo Lift CB 1500 B Scissor Lift Table Dimensions: 1500mm x 1000mm Max. load capacity: 1500 kg Year of manufacture: 2015 Min. height: 200mm Max. height: 1230mm Lift: 1000mm You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! Gsdpfozq A Suox Aivjkc You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2026, Slitting line 1500 x 6, made by GUIDA Line composition: - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear Gkjdpfx Aoymciasivoc - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls - Titling table - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Working Direction: From left to right Power supply tension: 380/50 Hz

Condition: good (used), Year of construction: 2002, functionality: fully functional, Boschert TRI 1500 CNC Z Rota Revo Tool quick-change system TRUMPF Punching force: 3 x 280 kN (28 tons) Station 1 Trumpf system tool - size 3 (105 mm) with spray device Station 2 Trumpf system tool - size 3 (105 mm) freely rotatable and indexable Station 3 Trumpf system tool/Boschert Revotool - size 3 (105 mm) Station 4 Engraving head incl. Revotool 8-position tool holder Travel distances x- 3000 mm (repositioning up to 9999 mm) Gkjdpfsz R Da Sox Aivsc y- 1580 mm Punch arm outreach: 1730 mm Tool system Trumpf size 1-3 (105 mm) Labod 32050 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90/45 mm, continuously programmable upwards and downwards. Punching scrap extraction Ball rollers in the machine table Table width left + right: 3200 mm each Table depth: 2810 mm Table height: 900 mm Overall width: 6482 mm Overall depth: 4600 mm Overall height: 2110 mm Drive power: 25 kVA Machine weight: 15,800 kg Hydraulic oil capacity: 160 l Color: Blue RAL 5017 / Light gray RAL 7035 Machine year of manufacture 2002 Well-maintained condition - currently being overhauled Available from mid-November 2026 with a large amount of accessories

Condition: used, functionality: fully functional, machine/vehicle number: 3988, total width: 450 mm, total length: 2,500 mm, total height: 1,000 mm, overall weight: 200 kg, turning length: 1,300 mm, MVM Capri T.1500 Heavy-duty – Professional machine Lathe in a robust design with a convenient copying mechanism Table extension up to 230 cm 4 speeds Left-right rotation Copying mechanism with handwheel Various tool rests Accessories (chuck, discs, etc.) Gksdpfoz R Abzex Aivec 6 lathe tools READY FOR USE Price negotiable / VAT can be shown separately

Condition: used, Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 0.7-5.5 kW Gedpfsd Nfdtsx Aivjkc -Speed: 190-1500 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 22 -external fan -Dimensions: 1140/600/H520 mm -Weight: 346 kg

Condition: good (used), Make: Keilinghaus Type: PLS 1500 HY Specifications Metric US Standard Max. blank / workpiece over bed 3000 Max. blank / workpiece in the gap 5000 Ø Centre height over bed 1500 mm Distance between centers 2600 mm Maximum sheet thickness 15 mm Stroke X-Axis 1000 mm Stroke Y-Axis 2800 mm Speedrange 240 Rpm Power 75 kW Spindle taper head stock DIN 55027 - Size 15 DIN / Camlock Stroke pinole quill 1200 mm Godekvnnkepfx Aivjkc Dimensions (Estimate) Length 10000 mm Width 8000 mm Height 4500 mm Weight 60000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist Gkedpfx Aiolg H Nwevsc -Manufacturer: Yale, lever chain hoist 1.5 ton -Load capacity: 1 1/2 ton -Chain Length: 3m -Quantity: 1 piece -Price per piece -Transport dimensions: 660/300/H150 mm -Weight: 19 kg/pc.

Condition: used, Workbench, work table, assembly bench Gksdjmch T Tepfx Aivsc -Workbench: with drawers, solid construction -Width: 1500mm -Depth: 700mm -Height: 880mm -Drawers/cabinet doors: each 2x, lockable/without lock -Number: 1x workbench available -Price per piece -Weight: 110 kg/pc.

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS with lifting unit -Drive motor: 0.37 kW 71 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Lifting unit: 1270 x 600 mm / see photos Gksdpfx Aietlzfyovoc -Number: 1x roller conveyor available -Dimensions: 1700/1500/H680 mm -Weight: 332 kg

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor Gkodstlzglspfx Aivoc -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 1x roller conveyor available -Dimensions: 1700/1440/H750 mm -Weight: 240 kg

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, - turning length: 1500 mm - turning diameter over bed: 500 mm - turning diameter over the slide: 300 mm - spindle passage: 71.5 mm - tailstock sleeve travel: 180 mm - rapid slide travel: - longitudinal: 5.6 m/min - transverse: 2.8 m/min - spindle speed range: 18-180 rpm - longitudinal travel range: 0.64-26 mm/rev. Gksdeq Hvayepfx Aivoc - transverse: 0.32-13 mm/rev. - stroke of pull screw: 6 mm

Condition: used, Thermal system, fan heaters, heating elements, radial heaters -Manufacturer: Karl Klein, fan with heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min Gedpjrkp Nxjfx Aivekc -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm -Weight: 6.2 kg/piece

Condition: new, functionality: fully functional, machine/vehicle number: NEW-21, empty load weight: 462 kg, maximum load weight: 1,038 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,760 mm, loading space width: 150 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 150 1500 1 Internal dimensions: 276cm x 150cm Side wall height: 30cm Loading height: 67cm Gross weight: 1500kg Payload: 1059kg Braked single-axle trailer Overrun brake and handbrake by AL-KO 1500kg axle with brake and cooling fins Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile side walls with tension locks Sides folding and removable on all sides Gjdpfsrk Iybox Aivjkc 15mm thick, anti-slip and robust phenolic plywood flooring Additional steel plate on wooden floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile strength Reinforced 13" C-grade tyres with steel valve M+S tires Net/rope hooks on frame 13-pin plug LED marker lights at the front Rear lights with reversing light, rear fog and triangular reflectors Upper frame mounted on rubber bushings Large tipping angle of 41 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -100km/h equipment (shock absorbers) -Spare wheel with holder -Without side walls (discounted price) -Increased side wall height to 35cm -Black Edition (black powder-coated side walls and rims) -Ramp rails -U-profile for attaching the original SARIS ramp rail -Electric tipping control -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric control -Safety prop for maintenance work on tilted vehicle -Complete LED lighting -Anti-theft device -Fine or coarse mesh net -H-frame -Mesh side extensions in various heights, also closed -Additional 30cm side walls with tension lock -Flat cover with or without bars -High cover 160cm or 180cm Further accessories available on request! Plus freight to Gera and vehicle registration documents: €200 net Images are for illustrative purposes only and may show accessories at extra cost. Have you not yet found the right trailer? We permanently have 50–100 units in stock, ready for immediate collection. Workshop open weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravans. Large selection of rental trailers. Additionally, we have a wide range of spare parts and accessories for trailers from all manufacturers. Get expert advice by phone, visit our website or drop by in person.

Condition: used, Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This tunnel freezer is currently assembled in our warehouse as you can see in the last photo, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Gedpfsrlk Ikjx Aivekc

Condition: excellent (used), Year of construction: 2020, Gear motor, electric motor, electric gear motor, stainless steel motor, stainless steel gear motor, stainless steel bevel gear motor, permanent magnet synchronous motor -Manufacturer: Bauer, adjustable stainless steel gear motor -Note: Frequency converter required -Type. SNFA5E09XA4-TF/VA-TM Godperqinmofx Aivokc -Engine: speed 150-1500 rpm -Power: 1.1 kW -Hollow shaft: Ø 38 x 1750 mm -Protection class: IP65 -Dimensions: 645/200/H220 mm -Weight: 53 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 15,159 h, machine/vehicle number: 61600, A trough vibrator (vibratory finishing machine) including centrifuge from the manufacturer Rösler is for sale. The machine is in very good condition and can be inspected on site by telephone appointment. Gedpfx Aioqrr A Revskc

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with 2-axle turntable steering -Platform: 3000/1500/H545 mm -Load capacity: 3.5 t -Tires: 75x305/400 Gkjdjt U Ttkopfx Aivjc -Drawbar: reversible, double-sided trailer coupling Quantity: 1 piece available -Overall dimensions: 4730/1500/H545 mm -Weight: 470 kg

Condition: as good as new (ex-display), Manufacturer: Cyrus Gkodpfoiv Hyqjx Aivoc Size: 1500 x 1150 (1050)mm Unbalance Motor: 2 Pcs. Friedrich F 285-4-3.4 (1,4 kW / 1.460 RPM) With Stainless steel wear plate.

Year of construction: 2000, condition: used, turning diameter 530 mm turning length 1500 mm control Fagor centre height 260 mm swing diameter 475 mm swing diameter over flat guideway 530 mm swing diameter over bed slide 315 mm bed width 350 mm spindle bore 80 mm Gedpfxsiu A Daj Aivskc spindle taper innen MK5 turning speeds 2 turning speed range 0-650/650-2500 U/min feed range 0 - 7000 mm/min rapid traverse 10 m/min diameter of quill 72 mm quill travel 180 mm weight of the machine ca. ca. 3,5 t dimensions of the machine ca. L/B/H 3,50x1,50x180 m

Condition: good (used), Offer 08533 Technical specifications: - Length: approx. 2000 mm - Width: approx. 1500 mm - Material thickness of the top plate: approx. 40 mm - Overall height of the ribbed plate: approx. 180 mm - Overall height of the plate with steel substructure: approx. 850 mm - Weight: approx. 1800 kg Gksdpfxoh Uuavo Aivec

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Stolle, clamping plate: with support ribs -Length: 2495mm -Width: 1500mm Gksdpfsikn N Rox Aivoc -Plate thickness: 40 mm -Plate: with supporting ribs (without straightening blade, not included) -Transport dimension: 2495/1500/H810 mm -Weight:2370 kg

Year of construction: 2021, condition: new, The solution for a quick convenient tool change that an employee can do alone. We have now designed a changing table that can be transported and operated by a forklift, a small electric forklift or even a forklift truck with lifting device. Additional information a) Maximum tool size 1000 x 700 mm long b) Maximum tool weight 1.500 kg c) Minimum tool size 600x500mm d) Total height approx. 600 mm e) Fork insertion height of the forklift 60 mm f) Width of forks up to 210 mm g) Minimum distance between forks 300 mm h) Travel speed of the tool approx. 20-25 mm per second. i) Manual locking after the tool is loaded j) Electric cable length 5 meters. k) motor class IE 3, with 2,2 KW, 400 V, 50 Hz l) Weight approx. 500 kg m) Incl. two anchor fittings on the table and two anchor holders for fastening to the press n) Built-in spirit level for leveling on the press Gkjdpfx Aijhtfdtovoc o) Emergency switch, on-off switch, switch for forward travel, switch for reverse travel p) Machine body double painted