Used Memory Submodules for sale (817)

Condition: refurbished (used), Year of construction: 2025, Studer S30 Center height: 125 mm center width: 650 mm Workpiece weight: 80 kg Other freely selectable options: - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw incl. SPS-Pro (cycle controlled) - "Workpiece memory"-SPS-PRO for 10/15/30/50 workpieces - Glass scale in X- and Z-axis - Swiveling internal grinding device - Motor spindle for internal grinding device - Frequency converter external grinding spindle - Frequency converter for internal grinding spindle - Grinding sensor system - Contact protection on external grinding spindle - Safety door - manually operated - Grinding wheel flange Iiodpfx Aajd Hdxws Ioc - LED spot with flex arm - suitable coolant system

Condition: refurbished (used), Year of construction: 2025, Schaudt A500 500-2500 grinding length: 500 / 750 / 1.000 / 1.500 / 2.000 / 2.500 mm center height: 150 mm / 180 mm / 225mm Workpiece weight: 300 kg / 500 kg Other freely selectable options: - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw incl. DUO-Control (cycle controlled) - "Workpiece memory" for 10/15/30/50 workpieces - Mini operating handset for Duo-Control - Glass scale in X- and Z-axis - Grinding sensor system - Frequency converter external grinding spindle - Swing-in internal grinding unit - Frequency converter internal grinding spindle - CE marking in connection with partial or full enclosure for splash water - remote maintenance - suitable coolant / exhaust system - grinding wheel flange / exchange arm - and much more We can also overhaul your existing bearing machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella uvm. Iiodod Hfd Nspfx Aa Ioc

Condition: used, Year of construction: 2023, operating hours: 800 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tire size (front): 600/70 R30, tire size (rear): 710/70 R42, operating hours: 800, initial registration: 19.12.2024. Initial registration: 19.12.2024, operating hours: approx. 850. Standard equipment/technical data: ENGINE: Max. power 224/305 kW/hp (ISO 14396), max. torque 1280 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, electronic engine control with Vistronic fan control, engine speed memory, Powercore engine air filter with coarse dirt pre-filter, EasyCare cooler package, additional fuel pre-filter with water separator, 500-liter fuel tank. Iijdpfxsw E N Tdj Aa Isc

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 15 A, welding current (max.): 565 A, For sale: Miller PipeWorx 400 565 AMP (60% 500A, 100% 400A) 380 Volt 2013 Water-cooled Pulse RMD Programma memory Elektrode option Steel + Stainless Steel weldable Refurbished, tested, and serviced. Test welding possible Including 1,0-1,2mm feed rolls, 2x PRO5000 MIG welding torches, earth work lead with clamp, gas cable, transport cart, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Ijdpfx Aey Uvi Doa Ijic

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) Isdpfex Db D Aex Aa Isic - Showa oil mist extraction unit - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting The machine is in very good condition and can be inspected under power at its current location.

Condition: ready for operation (used), Year of construction: 2019, total height: 2,110 mm, total width: 1,413 mm, overall weight: 640 kg, product length (max.): 1,413 mm, number of axes: 6, This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Extra Information • Robotics and Control Unit • Max. payload: 15 kg • Working range: 0–4500 mm • Digital inputs/outputs: 16 • Serial interface: Yes • CAN bus: Yes • USB interfaces: 2 • Flash memory: 8 GB • Buffer module: 24 V • Expandable to up to 12 axes • Welding Technology Power source: Included • Welding interface: Integrated • Welding and function test: Included • Torch cleaning: CMR-8-C torch cleaning device • upright Robotic welding torch: Included • Sensors Tactile sensor: Yes • Arc sensor: Included Technical Data of Workpiece Positioner • Load capacity: 10 kN • Nominal torque: max. 1600 Nm • Tilting moment: max. 8800 Nm • Mass moment of inertia: 900 kgm² • Rotation range: +,- 360° • Swivel range: 370° • Welding Fume Extraction capacity: 3000 - 4320 m³/h • Motor power: 5.5 kW • Connection voltage: 3 x 400V/50 Hz • Noise level: 65 dB(A) • Weight: 640 kg Iijdpex D Hdhjfx Aa Ioc • Dimensions (W x D x H): 1413 x 1413 x 2110 mm

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Iodpfxsyyap Ee Aa Ijic

Condition: used, mileage: 21,681 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2025, emission class: euro6, color: black, number of seats: 6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, * "Style" * 17" disc brakes at the front and 16" disc brakes at the rear * 2 single seats facing opposite to the direction of travel (vis-à-vis arrangement) in the 2nd row * 2 vehicle keys * 2 USB-C ports at the front, 4 USB-C charging sockets in the passenger compartment * 3-zone "Air Care Climatronic" air conditioning with additional control panel in the passenger compartment (not available with Beach models) * 4-cylinder engine 2.0L unit 05L.E * 7-speed dual-clutch transmission DSG * AGR ErgoComfort front seats, leather including seat ventilation, electrically adjustable, driver only with memory and massage function * AGR seat, electrically adjustable, front left, with 4-way headrest, driver only: with memory and massage function * Emission concept, WLTP3 M1, N1-I//EU6EA * Distraction and drowsiness detection * Adaptive chassis control DCC with standard suspension * Front and passenger airbags, with passenger airbag deactivation * 30-color ambient lighting, including footwell lighting for the 2nd seat row (not available in California with swiveling seats) * Mechanically swiveling and electrically deployable tow bar with trailer maneuvering assist * App-Connect including App-Connect Wireless for Apple CarPlay and Android Auto * Armrests for driver and front passenger seat, on both sides, with electric lumbar support and folding table * Advanced assistance package * Evasive maneuver support and turn assist * Adaptive cruise control ACC "stop & go" * Exterior mirror housings in high-gloss black * Bi-color seat covers, center sections in "Savona" leather (perforated for AGR seats), side bolsters in smooth leather look * Chrome trims on the sides and rear * Trim inserts "Dark Silver Brushed" * Anti-theft alarm system with interior monitoring, backup horn, and tow-away protection * Digital Cockpit Pro * Digital radio reception * Front seatbelt automatic retractors with pretensioners and height adjustment * Rear outer three-point automatic seatbelts and outboard pretensioners with ECE label, pretensioners only for 2nd and 3rd row * Dynamic high beam control "Dynamic Light Assist" for LED matrix headlights * EU6 4-cylinder turbo diesel 2.0l R4 110 kW (150 HP) TDI (EA288) * Electronic stability program and electromechanical brake booster * Driver assist "Travel Assist" including lane keeping assist "Lane Assist" and "Emergency Assist" * Drive profile selection for DCC * Front-wheel drive * Laminated safety glass windscreen, heat- and sound-insulated, heated * Speed limiter and "Intelligent Speed Assist" * Glove compartment with lighting Iodpox Iy Rlsfx Aa Isic * Head-up display * Electrically operated tailgate (opening/closing) * Tailgate with electric opening and closing * HT-LED matrix headlights with LED daytime running lights * Plastic flooring with wood effect, reinforced for stepping * LED rear lights * Illuminated strip between the headlights * Dynamic range adjustment, with dynamic cornering light * With UNECE CS&SU * "Comfort" mobile phone interface with inductive charging * Multifunction leather steering wheel with shift paddles, heated * Multifunction camera * "Discover Pro" navigation system with 25.4 cm (10") color touchscreen including "Streaming & Internet" * Cargo partition net * Emergency brake assist "Front Assist" with pedestrian and cyclist detection * Emergency call system eCall, requirement: availability of necessary mobile networks * Options infotainment (MIB3 MP) Version 1 * Park assist

Condition: ready for operation (used), Year of construction: 2010, Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine. Machine frame and feed • Heavy-duty welded steel construction for 3 sanding units • Constant feed height: 900 mm • Control panel and sanding belt change on the left (in feed direction) • Continuously variable feed speed: 3–18 m/min, frequency-controlled • Vacuum conveyor belt version with 5.5 kW vacuum blower and vacuum channel to the top edge of the machineUnit 1: Cross-belt unit • Pressure lamella belt with felt and graphite Iijdpoy Twwyefx Aa Iec • ISD link pressure bar system with 11 mm workpiece detection and 44 mm pressure bar width • Workpiece-controlled sanding belt blow-off deviceUnit 2: CBF combination unit • Grooved rubber contact roller Ø 130 mm, 60 Shore • Cross-feed lamella belt with separate 4.0 kW drive • ISA link pressure beam system with 11 mm workpiece detection and 22 mm pressure width (counter-rotating) • Workpiece-controlled oscillating sanding belt blow-off deviceUnit 3: Cross-belt unit • ISD link pressure beam system with 11 mm workpiece detection and 44 mm pressure beam width • Workpiece-controlled sanding belt blow-off deviceControls and functions • Siemens MP 377 12" Multi-Panel HMI: 12" color display, program memory for 300 programs, all parameters set via program • WEBER i-Touch control with rotary knob navigation • WEBER AWDM: automatic thickness adjustment at machine inlet with start switch • Over-thickness safety roller at inlet: automatic lifting of contact roller and segmented pressure beams; feed shutdown • ISA/ISD control: high-resolution workpiece detection in 22 mm increments; free loading of complex shapes; multiple loading with minimal spacing; adjustable grinding intensity and pressure via program • ISA linkage pressure beam system (Unit 2): pressure piece movable longitudinally and transversely • ISD segmented pressure beam system (Units 1 and 3): separate adjustable edge pressure (outer edge only or outer and inner edges); selectable for longitudinal and transverse edges or longitudinal onlyTechnical data • Working width: 1350 mm • Drive unit 1 (Eco-Drive, frequency-controlled): 15.0 kW • Drive unit 2 (Eco-Drive, frequency-controlled): 20.0 kW • Drive unit 3 (Eco-Drive, frequency-controlled): 15.0 kW • CBF drive: 3.0 kW • Vacuum blower drive: 5.5 kW • Anti-rebound feed (frequency-controlled): 3.0 kW • Height adjustment drive (frequency-controlled): 0.75 kW • Sanding belt speed (frequency-controlled): approx. 3–20 m/s • Sanding belt size (cross belts): 2 × 150 × 5100 mm • Sanding belt size (wide belt): 1370 × 2620 mm • Workpiece thickness (min/max): 4–140 mm • Working height (constant): 900 mm • Stepless feed speed: 3–18 m/min Additional equipment • Workpiece ejection device with WEBER ES system (workpiece-controlled; energy-saving; individual slide control) • WANDRES micro-cleaning, single-brush version (power sword brush with integrated micro-moistening for optimal paint dust removal)

Condition: ready for operation (used), Year of construction: 2017, product length (max.): 5,015 mm, Edge and profile sandingr manufactured in 2017. This HEESEMANN UKP 20 features a total conveyor length of 5015 mm and a feed speed range of 5-25 m/min. It includes two belt sanding units for sanding straight edges and small profiles, with electronic frequency control for speed adjustment. If you are looking to get high-quality sanding capabilities, consider the HEESEMANN UKP 20 machine we have for sale. Contact us for further details. Workpiece conveyor system • Total length: 5015 mm • Drive: 1.5 kW three-phase motor, double chain transport • Feed speed: 5–25 m/min, frequency-controlled • Working height: 880 mm (constant) • Integrated control cabinets • Adjustable stop rail with digital display and counter rail with central width adjustment • 4 side guide rollers between sanding units for safe strip transportControl • Industrial PC, 10.4" LCD-TFT touchscreen • Production and downtime display • Program memory for 100 programsSanding units • 2 x belt sanding units “M4” (Positions 1 and 2) • Application: Straight edge sanding • Belt: 2300 x 80 mm • Speed: 0.7–12 m/s, stepless via electronic frequency control • Motor power: 3.0 kW • Electronic sanding pressure control from terminal • 2 x oscillation units for “M4” (Positions 1 and 2) • Purpose: Full utilization of sanding belt • 2 x belt sanding units “K4” (Positions 3 and 4) • Application: Small profile sections; chamfering • Swivel range: +90° upward / -45° downward Isdpfx Aoy Twhxja Ieic • Belt break switch • Tool holder with quick-change mechanism • Intermittent belt feed mechanism • Belt: 2000 x 50 mm • Speed: 0.5–8 m/s, stepless via electronic frequency control • Motor power: 1.1 kW • Electronic sanding pressure control from terminalAutomation/line control • 4 electronic line controls for fully automatic timing of tool contact/lift-off based on set feed rate, sanding pressure, and unit angle

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Iiodoyrndmepfx Aa Ioc Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: new, functionality: fully functional, Year of construction: 2026, ! Short delivery time, under 10 weeks! Model designation: Impuls Packaging Box-Motion BF Production orientation: Horizontal Conveying system: Chain conveyor belt or infeed belt Film feed: From below Forming shoulder: Flexible and fixed Operator display: 10" touchscreen with memory functions, pivotable via outrigger arm for comfortable operator handling Drives & control: 9 servo motors and PLC control Package length: 120-600 mm Package width: Max. 350 mm (depending on film width) Package height: Max. 150 mm (depending on forming shoulder) Speed: 10-60 bags/min. Film width: Up to 900 mm, depending on model Machine weight: Approx. 900-1500 kg Machine material: 304 stainless steel Registration mark sensor: Yes External compressed air required: Yes Printer mount: Available at extra cost Delivery time: Current delivery time under 10 weeks Features: • Box-motion end sealing • Manual reel fixation without compressed air Iijdpfsq Ikgyjx Aa Ioc • Automatic reel centering for precise application • Automatic stop with empty products (no product – no bag) • Easy touch screen operation via color icons • Continuous product feed through sensor-based control • Registration mark sensor included • Safety protection covers • 3-sided seam packaging (fin seal) + longitudinal seal • Can be combined with upstream and downstream machines • Customer-specific modifications/designs on request Additional options (on request and at extra cost): • Thermal transfer printer, e. g. for best-before dates, print width up to 60 mm • Euro hole punch, etc. • Gas flushing units for modified atmosphere packaging (extends product shelf life) • Automatic product infeed systems, intermittent push-in systems • Length-dependent product processing via photoelectric sensors

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Iiodjzcfhdopfx Aa Ijc

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 4 axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Standard equipment • 12,000 rpm spindle • High-speed 30+1 side-mount tool changer • Window air blast • 55-gallon coolant tank • Control system (Haas Control) Isdpfx Aoyaix Uoa Ioic • Ethernet interface • WiFi connection • Power failure detection module • Advanced tool management • Media display (M130) • HaasConnect (remote monitoring) • Safe Run • HaasDrop • Rigid tapping • Standard program memory (1 GB) • Stainless steel way covers • Phone charging station Included equipment • 4th + 5th axis preparation (pre-wiring) • High-speed machining option • Export packaging • Rotary table HRT210 • Direct control by mill CNC • Programmable coolant pump • Chip auger • Chip tray filter kit • Through-spindle coolant (300 psi / 21 bar)

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 CNC axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel fences with numerical adjustment with 21 drilling spindles (10 left, 11 right) Spindle spacing: 32 mm Ijdpslk R Epofx Aa Ioic Maximum drilling distance: 640 mm Maximum tool diameter: 40 mm Maximum drilling depth: 65 mm Maximum horizontal drilling height: 35 mm Working height: 860 mm Maximum panel thickness: 60 mm Maximum panel size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction port: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Iiodpovvi I Rsfx Aa Isc

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Ijdpevvkfdsfx Aa Ioic

Condition: new, Year of construction: 2025, functionality: fully functional, NEWAY VM1050H FANUC 0IMF1 VERTICAL MACHINING CENTRE YEAR OF MANUFACTURE - NEW - BUILT 2025 STANDARD INCLUDED FACTORY FITTED MACHINE OPTIONS AIR GUN SPINDLE AIR BLAST SPINDLE PROTECTION AIR CURTAIN 24 STATION ATC TOOL MAGAZINE CHAIN TYPE CHIP CONVEYOR WITH CHIP BOX FANUC 0IMF 1 WITH 10.4 INCH COLOUR LCD DISPLAY & 8MB MEMORY MANUAL PULSE GENERATOR (MPG) COOLANT FLUSHING SYSTEM COOLANT GUN FRONT DOOR INTERLOCK FULLY ENCLOSED SPLASH GUARDING SYSTEM TELESCOPIC SLIDEWAY COVERS LED WORKING AREA LIGHTING SYSTEM PATROL LIGHT (3 COLOUR) AIR CONDITIONING IN ELECTRICAL CABINET BASIC MACHINE INSTALLATION PARTS CE STANDARDS MACHINE CONFIGURATION CENTRALIZED AUTOMATIC LUBRICATION SYSTEM MACHINE MANUALS & OPERATOR HANDBOOKS STANDARD ACCESSORIES TRANSFORMER (415V, 3PH, 50HZ) BELT DRIVE SPINDLE - 8,000 RPM #40 TAPER WITH OIL COOLER SPINDLE MOTOR FANUC 11.0 / 15.0 KW MACHINE TYPE, CONSTRUCTION & FEATURES  HEAVY DUTY CAST IRON CONSTRUCTION  COMPACT DESIGN  PRE-LOADED BALLSCREWS  HIGH PERFORMANCE LINEAR GUIDEWAYS – X / Y / Z MACHINE SPECIFICATION Worktable Travel (X Axis) 850 MM Saddle Travel (Y Axis) 520 MM Spindle Travel (Z Axis) 560 MM Distance from Spindle Nose to Worktable 150 ~ 710 MM Distance from Spindle Centre to Column 580 MM FEEDRATES X Axis Rapid Traverse Rate 36 M / MIN Iisdextfxcepfx Aa Isc 3 | Page Y Axis Rapid Traverse Rate 36 M / MIN Z Axis Rapid Traverse Rate 36 M / MIN Cutting Feed Rate 10 / 10 / 10 M / MIN ACCURACY Positioning accuracy (X / Y / Z) 0.008 / 0.008 / 0.008 MM Repeatability (X / Y / Z) 0.005 / 0.005 / 0.005 MM WORK TABLE Table Size 1,000 x 520 MM Max. Table Load 650 KGS T-Slots - Width 18 MM SPINDLE HEADSTOCK Tool Shank BT40 [BBT40] [CAT40] Pull Stud P40T-1 (MAS403) Spindle Speeds 8,000 RPM Max. Output Torque 70.0 / 96.0 NM Spindle Motor Power 11.0 / 15.0 KW AUTOMATIC TOOL CHANGER Number of Tools 24 Tool Shank BT40 Max. Tool Dimensions Ø 80 x 300 MM x 8.0 KGS Tool Exchange Time 1.5 SEC MISCELLANEOUS Power Requirement 25 KVA Power Supply 415V / 3PH / 50HZ Compressed Air Consumption / Pressure 280 L / MIN / 6 ~ 8 BARS Machine Dimensions (L / W / H) 3,680 x 2,480 x 2,850 Machine Weight 5,500 KGS

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM Iijdpfou A U Nksx Aa Ijc SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function Isdpsq Nmm Tefx Aa Ioic TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: new, Number of motors , Stück 0 , mm Control , 0 cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists Iijdpfx Aey T R Sqea Ijc USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm Iodjhtm E Njpfx Aa Ioic table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec Iedpfx Aaofxyirs Ijic

Condition: refurbished (used), functionality: fully functional, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, welding current at 100% duty cycle: 400 A, welding current (min.): 10 A, welding current (max.): 420 A, For sale: Kemppi Pro Evolution 4200 10-420 AMP (100% 400A) 400 Volt Pulse Double Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Soft start Hot start Down slope Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, and tested Including 2x PRO5000 Welding torches, earth work cable with clamp, and gas cable. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Iiodpfxsy Tt T De Aa Ioc

Condition: new, Year of construction: 2025, Bending machine ZB 70/3 H ECO - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm Iiedehmbh Hopfx Aa Ijc - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x650x1070 mm - colour RAL5012 / RAL7015