Used Mebor Vtz 1400 / 1600 Plus for sale (8,828)

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length Nsdpfx Ajkvnuueaaewf 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our entire inventory of immediately and short-term available vehicles on our website. For a complete list of equipment, please enquire. SPECIFICATION: GOOSENECK: * Gooseneck in SNT design for improved platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° taper * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * On the gooseneck and rear taper: open grating with 5 mm steel reinforcement * 2-inch kingpin * Guide plate from gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO connector on the front panel (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of removable ALU side panels, approx. 400 mm high, anodized finish * 1 LED work light each, left and right, mounted at the top of the front wall, wired to the coupling panel for the tractor unit CARGO AREA: * Platform length approx. 9,600 mm, with rear slope approx. 900 mm x 6° * Hydraulic lift/lowering section after gooseneck, length approx. 3,000 mm, rated for up to approx. 9,000 kg * Continuous open grating on lift bed and platform with approx. 5 mm steel underlay for reinforced point loading TYRES: 235/75 R17.5, 3PMSF, twin tyres. Make at our discretion * TPMS tyre pressure monitoring system compliant with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steerable * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with starting aid * Technical axle load: 12,000 kg per axle * Air suspension with raise/lower valve HYDRAULIC LOADING RAMPS: * 1 pair of AXS steel ramps, two-part, open grating surface, length approx. 4,920 mm, width approx. 900 mm * Hydraulically folding ramp tips * Each ramp hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward * Strobe lights at ramp tips, switch positioned next to ramp controls * Ramp transport lock in driving position with quick-release * Painted non-slip coating on outer frame and ramp tip * Mechanical drop-leg side supports integrated in ramps, to assist with dock alignment Nedpfx Aasy Auhhsajwf * Ramp control valves on right side of vehicle BRAKE SYSTEM: WABCO EBS-E braking system, compliant with EU regulations SURFACE TREATMENT: * Entire chassis HRM metallized with ZINACOR 850 (85% zinc / 15% aluminium) for superior corrosion protection PAINTWORK: * Trailer body Carmine Red (RAL 3002) * Rims Silver Grey * Side walls Aluminium natural finish * Hub caps as per axle manufacturer * License plate holder Pure White (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. coupling panel for supply lines to tractor unit, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain anchor points inside left and right on front wall incl. aluminium trays below left and right for stowing chains or straps * Behind the front wall: approx. 12 mm thick DELIGNIT panel, bolted * Additional 2 pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling power, with remote control. Steel cable approx. 24 m long, 9.5 mm diameter, incl. cable pressure roller * Deflection pulley for the winch, with shackle and bolted lashing point

Condition: good (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder: DIN 69871 ISO 40 Travel paths: X-axis: 1615 mm, Y-axis: 815 mm, Z-axis: 725 mm Table load capacity: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Space requirements (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Nwodpfx Asyy Npnjaasf Accessories / Special Features: • CNC path control FAGOR • ICS coolant through spindle, 20 bar • 24-position tool changer • Hinged belt chip conveyor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A Nwedpfxjh Uuzyj Aaajf -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: WMF 5000-S-Plus fully automatic coffee machine. The machine is sold with all accessories shown in the pictures. Viewing is possible at any time by prior appointment, even at short notice. VAT can be stated separately! Nedpfjw S T Htox Aaaswf

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: ----- 1) Haberkorn FZS1 slotting machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4 Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7 (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine Nwodpfxsxa Hi Ns Aaajf -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW -1x Roller conveyor appr...

Year of construction: 2023, condition: excellent (used), Zerma Amis granulator type: GSE 700/1400 C 7-3 GSE 700 Economic compact granulators Externally adjustable knives using setting gauge Mobile, compact design Optimal accessibility Aggressive, tangential material feed Screen perforation: 4 mm Drive: 90 kW Feed opening: 720 x 1400 mm Rotor diameter: 700 mm Rotor knives: 7 x 4 Nedpfx Aaoyx I R Ujaowf Stator knives: 3 Weight: 6700 kg Prepared for extraction system Housing upper part opening: hydraulic Screen basket operation: hydraulic Location: ex customer site - immediately available - Subject to prior sale.

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Nwsdpfx Asy E S D Eoaaef

Condition: good (used), Year of construction: 2001, machine/vehicle number: NN7716, Maximum book size: 40cm X 27cm, Minimum book size: 12 cm X 9,5cm Maximum book block size: 40mm, Minimum thickness book block: 3 mm, Max.speed 1500 p/h 4 Clamps, Milling, Nsdpfx Aormkmroaaowf Back and side gluing with hot melt

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roll, roll carrier for cardboard roll Nedjxmi H Rspfx Aaajwf -Roll carrier: winding roll for packaging machine -Roll: Ø 148 x 1600 mm -Drive shaft/mount: Dimensions see photos -Dimensions: Ø 148 x 1870 mm -Weight: 38 kg

Condition: excellent (used), Year of construction: 2001, overall weight: 16,000 kg, - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm - Rotor Ø 1.200 mm - motor 180 KW Nwedpfeyzn S Dsx Aaaof - Weight 16 to Possible drive power 160 - 400 KW Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Year of construction: 2001, condition: excellent (used), - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm - Rotor Ø 1.200 mm - Weight 16 to Possible drive power 160 - 400 KW Nsdpfoyzn H Isx Aaaswf Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-component 12.3 million cycles 86,565 hours manual operation 78,099 hours automatic operation Njdpfexzix Ajx Aaaowf Injection unit 1 horizontal 290, diameter 25, max. 71 cm³ Injection unit 2 vertical 70, diameter 18, max. 21 cm³ Opening stroke 925 mm Electric index rotation 12-zone hot runner integrated 3x core pull 2x air blow (control for needle shut-off) Various customer inputs and outputs Interfaces: ALS Temperature control units Dryers Multilift H 6kg: 2x vacuum 5x double-acting grippers Z-axis servo 800mm C, G, X, and B-axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) Important Notice!!! Current update – Tax note and benefit for used machinery From 01.07.2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Section 2 EStG-E)

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component 78,099 hours, automatic Injection Unit 1: horizontal, 290mm, diameter 25mm, max. 71 cm³ Injection Unit 2: vertical, 70mm, diameter 18mm, max. 21 cm³ Opening stroke: 925 mm Electric table indexing 12-zone integrated hot runner 3x core pulls 2x air blow (control for needle shut-off) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6kg: - 2x vacuum - 5x double-acting grip - Z-axis servo 800mm - C, G, X, and B axis pneumatic Nsdpfx Aox A Dy Reaaswf - Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we offer a commissioning guarantee for every machine purchased from us, meaning the machine will be started up by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Note!!! Current legal update – Tax advantage for used machinery Effective from 01.07.2025, used machines can also be subject to an annual special depreciation of 30%. In addition to the lower price compared to a new machine, you can benefit from the same depreciation allowances as with a new machine. Keyword: growth booster (§ 7 Paragraph 2 EStG-E)

Condition: used, Year of construction: 2018, load capacity: 7,000 kg, fuel type: diesel, gearing type: automatic, Equipment: cabin, Manitou MRT 2470 plus Privilege #772691 in red Type: MRT 2470 Lifting capacity: 7,000 kg Power: 129 kW Color: red EXTRAS: Radio remote control included (see photo) Performance (Metric) Max. lifting capacity: 7,000 kg Max. lift height: 24.80 m Max. outreach: 20.50 m Dimensions l2 - Length to fork back: 7.55 m l1 - Overall length: 8.75 m b1 - Overall machine width: 2.49 m b7 - Overall width (stabilisers extended): 6.25 m h17 - Overall height: 3.05 m Wa3 - Outer turning radius (chassis): 6.50 m m4 - Ground clearance: 0.35 m a4 - Tilt angle: 12.30° a5 - Dump angle: 108.70° Standard tires: pneumatic Standard forks: 1200 x 130 x 60 mm Weight: 21,760 kg Stabilisers Type: Telescopic scissor supports Controls: Stabiliser operation, individual or simultaneous Drive Manufacturer: Mercedes Type / Emission standard: OM 934 E4-5 - Stage 4 / Final Tier 4 Power: 176 hp / 129 kW Max. torque: 750 Nm @ 1,500 rpm No. of cylinders / Displacement: 4 / 5,130 cm³ Injection: Direct Cooling: Water-cooled Transmission Type: Hydrostatic Tractive force: 9,500 daN Parking brake: Automatic negative Service brake: Hydraulic Hydraulics Pump type: Variable displacement Hydraulic flow: 180 l/min Pressure: 350 bar Tanks Hydraulic oil: 290 l Fuel: 290 l Nwsdeytk Nbspfx Aaasf Exhaust treatment fluid AdBlue: 57 l Noise emission and vibration Operator station noise level (LpA): 79.70 dB(A) Ambient noise level (LwA): 108 dB(A) Hand/arm vibration exposure

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 3214, functionality: fully functional, workpiece height (max.): 40 mm, feed rate X-axis: 10 m/min, total height: 1,600 mm, total length: 3,700 mm, total width: 1,445 mm, overall weight: 1,080 kg, TECHNICAL DETAILS Feed speed: 10 m/min Panel thickness: 8 - 40 mm Max. edge thickness: 3 mm MACHINE DETAILS Operating length: approx. 100,000 m Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,445 x 1,600 mm Weight: 1,080 kg Nsdey Hih Repfx Aaajwf EQUIPMENT/FEATURES PLC control including touchscreen Power stop/trimming knife Jointing unit with DIA milling tools Application of hot melt adhesive to workpiece Robust chain drive Upper operator panel, rapid adjustment from operator side Double roller pressure Signal lamp for workpiece feed Quick-heating glue pot, maintenance-free Pneumatic end trimming for edge thicknesses up to 3 mm High-frequency crosscut saw High-frequency milling unit with replaceable cutter heads For radius, straight and chamfer milling Workpiece air blower Integrated collection container for edge material offcuts Extendable support arm on the front side Note: The machine can still be inspected under power until the middle of calendar week 19.

Condition: used, Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Translated with (free version) For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Nsdpoy E U Efsfx Aaaewf Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2004, KAISER Press KSTU 1600 - 15 - 3 PSR Pressing force 1,600 kN Stroke rate 20 - 260 1/min Adjustable stroke 20-120 mm Ram adjustment 120 mm Installation height 400 mm Including strip feeding line Nsdpfx Asy Ev Syeaajwf

Year of construction: 1998, condition: ready for operation (used), Various old but fully functional measuring and testing devices from a grain laboratory are available. 1) Falling number measuring device Perten Falling Number 1402. 2) Sample cleaner A/S Rationel Kornservice Sample Cleaner MLN, weight: approx. 60kg. 3) Laboratory mill MIM 3100. 4) Hectoliter weight Louis Schopper with scale and weights. 5) Grain moisture meter Pfeuffer HOH Express HE 90, year of manufacture: 1998, measuring time: approx. 30s. 6) Laboratory mill Perten LM 3100. 7) Laboratory oven. 8) Calibration and temperature reference bath Fluke 7320 High-Precision-Bath, temperature range: -20°C/150°C, resolution: 0.01°C, bath dimensions X/Y/Z: approx. 170mm/90mm/230mm, volume: approx. 9l. Documentation available. An on-site inspection is possible. A package sale is preferred, however individual sale is possible. Njdpfxey Ey Ths Aaaewf

Condition: good (used), Year of construction: 2008, functionality: fully functional, Maximal laundry measures: Length: 1000mm Nwedpfjyzy Abox Aaaof Width: 1000mm Height: 800mm Diameter: 1400mm Max. load: 1000kg

Condition: ready for operation (used), * Brand: SBM Austria Nedpfjywnczjx Aaaewf * Dim: length 2000 mm - width 1400 mm, * Driving: two pieces vibration motors of each 2,5 kW * Incl.: springs and springsupport.

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute * Type: FUF * Dim.: length 4500 mm - width 1400 mm Nwedpfxeywmqws Aaaef * with: two pieces vibration motors of each 9,5 kW

Condition: ready for operation (used), * Brand: Hazemag * Model: vibrating chute * Dim. vibrating chute: length 4000 mm - width 1400 mm. * Driving: 2 pieces vibration motors of each 5,6 kW. * Incl.: springs. Nwsdpeywmmlsfx Aaasf

Condition: used, fuel type: diesel, lifting height: 20,300 mm, Year of construction: 2014, Empty weight: 17.020 kg General condition: average Technical condition: average Nsdpfxsv Ti I Ee Aaaswf Visual appearance: average Delivery terms: EXW Please contact Christian Theißen for more information Manufacturer: Manitou Model: MRT 2150 Plus Year of build: 2014 Condition: Used Data: Max. lifting height: 20,32 m Lifting capacity: 4.999 kg Max. extension: 18,20 m Length forks: 1,20 m Drive type: Diesel Dimensions (without forks): LxB 6,89 x 2,43 m Building height: 3,08 m Rotation range: 360° (endlos) Own weight: 17.020 kg Total permissible weight: 17.400 kg Special features: All-wheel drive, all-wheel steering, connection for auxiliary equipment, supports, automatic attachment recognition. Location: 41468 Neuss immediately available

Condition: used, functionality: fully functional, power: 92 kW (125.09 HP), fuel type: diesel, color: yellow, overall weight: 14,800 kg, tire size: 10.00 x 20, number of seats: 1, Year of construction: 2022, machine/vehicle number: 2477168, Equipment: all wheel drive, cabin, Year of manufacture: 2022 Engine: 92 kW (Isuzu) Weight: 14.8 t Dimensions (L x W x H): 7.89 x 2.41 x 3.04 m Reach: 9.24 m Digging depth: 5.93 m Tyres: 10.00 x 20 Displacement: 2.99 l Boom: VA Nwsdjy Hhkdjpfx Aaasf