Used Lleal Sbc-14000 for sale (168)

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. Fgsdpfx Aeg Ewwrsb Aeg *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2004, condition: good (used), Technical Data Fsdsb Twi Nepfx Ab Asgg Type: Pro Select Manufacturer: Zeiss Year of Construction: 2004 The machine can be equipped with new software and control system according to customer requirements. Measuring Range X = 14000 mm Y = 3080 mm Z = 3000 mm Measuring Inaccuracy U3 Duplex = (68 + L/35) µm

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm Fgjdpfx Abefrvzvs Aeg capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Technical details: machine weight approx.: auf Anfrage kg Fedju N Avlepfx Ab Ajgg voltage: 50 Hz current- max.: 230 A dimension machine xH: auf Anfrage m Measured value capture processing Recording of machine quality measurements ‘Mode of operation: Measuring the relative movement between tool and workpiece.’ (Excerpt from operating instructions) Measuring computer Device options: -sequential measurement -Test plan management -16 features -sequence triggering -Diskette drive Control unit manufacturer Nieberding, serial no. 8-19863 with connection for air conditioning and shut-off valve Equipment: 2x precision measuring display and maintenance box Accessories Test mandrel Ø 48mm and test device *

Year of construction: 2021, condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-100-PPVA-N3 1383337 -Stroke travel: 100 mm Fodpfxsxy Imco Ab Asgg -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available -Dimensions: 320/95/H95 mm -Weight: 3.5 kg

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), fuel type: electric, color: other, overall weight: 14,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. Fodpszlr R Asfx Ab Asgg General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2020, functionality: fully functional, For sale: 3 × new Proxcys BCC600 chromatography systems (year of manufacture 2020, original packaging, CE certified) We are offering three unused, originally packaged Proxcys BCC600 batch chromatography columns from 2020. The units are brand new, fully CE-certified, and comply with GMP requirements for pharmaceutical and biotechnological applications. Technical data (per unit): • Manufacturer: Proxcys • Model: BCC600 • Year of manufacture: 2020 • Condition: New, in original packaging • CE marking: Yes • Operating pressure: 0.4 bar • Max. temperature: 30 °C • Dimensions (L × W × H): 1810 × 2000 × 2350 mm • Weight: approx. 1,600 kg Construction & features: • High-quality chromatography column made of stainless steel 1.4435 (316L), electropolished (Ra ≤ 0.8 µm) • Acrylic column (PMMA, USP Class VI) with integrated 360° CIP spray system Fsdpfx Ajxyp Rijb Ajgg • Electromechanical lifting mechanism with 3 Siemens load cells • Three-blade paddle agitator with frequency converter • BioControl connections (DN15–DN65) for product, buffer, and safety applications • Safety valve, pressure gauge, sensors for pressure, level, and temperature • PLC control system with HMI, emergency stop, status lights, and acoustic signal module Special features: • New & in original packaging – never put into operation • GMP-compliant design • Ideal for protein purification, chromatography, downstream processing, and pharmaceutical production • Complete technical documentation included (Functional Specification, P&ID, Drawing, Electrical Schematic) Availability: 3 units Location: Germany Price: On request. The original new price in 2020 was €320,000 per unit; all three units together were €960,000.

Condition: new, Professional industrial worm gearbox from the renowned manufacturer AUMA. The device is factory-new, stored, and in excellent technical and visual condition. Robust and heavy-duty construction, designed for use in industrial installations, fittings, valves, dampers, and heavy drive systems. Technical data: * Manufacturer: AUMA * Type: GF 125.3 * Version: RR * Gear ratio: i = 208:1 * Input torque: 53 Nm * Output torque: 4000 Nm * Protection rating: IP67 * Operating temperature range: -25°C to +80°C * Lubrication: F1 * Shaft with keyway * Heavy-duty industrial housing Applications: * Actuators for valves and dampers Fgedsy Sitwepfx Ab Aog * Industrial installations * Power industry * Water supply and wastewater treatment plants * Industrial automation * Pipeline systems Condition: new, from stock. Price applies to 1 unit.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DSBC-40-20-PPVA 2123166 -Stroke travel: 20 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 Fjdpsxwvp Tsfx Ab Asgg -Max. pressure: 12 bar -Number: 16 cylinders available -Price: per piece -Dimensions: 180/55/H55 mm -Weight: 2.6 kg/pc.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-300-PPVA-N3A2 -Stroke travel: 300 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Max. pressure: 12 bar -Number: 4 cylinders available Fjdjxwkn Repfx Ab Aegg -Price: per piece -Dimensions: 515/235/H95 mm -Weight: 7.0 kg/pc.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Fgsdpfx Ajxwkvuob Asg -Manufacturer: Festo, standard cylinder type DSBC-40-320-C-PPVA -Stroke travel: 320 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Hole: Ø 12 mm -Max. pressure: 12 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 580/55/H130 mm -Weight: 2.6 kg/pc.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Fgedpfx Abjxwkr Ns Ajg -Manufacturer: Festo, Standard cylinder type DSBC-80-160-PPVA-N3 -Stroke travel: 160 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available Price: per piece -Dimensions: 520/95/H170 mm -Weight: 5.2 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,729 h, load capacity: 14,000 kg, lifting height: 3,550 mm, free lift: 1,730 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,100 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 2,050 mm, fork length: 1,500 mm, fork width: 250 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 400/60-15, rear tire type: cushion tires (black), rear tire size: 465/55-20, overall weight: 29,250 kg, empty load weight: 15,250 kg, total height: 3,000 mm, total length: 3,000 mm, total width: 3,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 COMBILIFT C14000 | LPG | 3550 MM | HYDRAULIC FORK POSITIONER | FULL CABIN | READY FOR WORK ✅ FULLY SERVICED MACHINE ✅ WARRANTY INCLUDED 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT C14000 multidirectional forklift. The machine has been professionally serviced, thoroughly inspected, and extensively tested to ensure maximum reliability and performance. It is ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and demanding logistics environments. ⭐ KEY BENEFITS ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 3,729 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available 🔧 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 📌 Model: C14000 📅 Year of Manufacture: 2019 🏋️ Capacity: 14,000 kg 📍 Load Centre: 600 mm ⛽ Engine: Kubota LPG 🕒 Operating Hours: 3,729 h ⬆️ Lift Height: 3,550 mm ⚖️ Machine Weight: 15,250 kg 📐 DIMENSIONS 📏 Overall Height: 3,000 mm 📏 Construction Height: 3,100 mm 📏 Overall Length: 3,000 mm 📏 Overall Width: 3,300 mm ↔️ Fork Positioner Width: 2,050 mm 🔩 FORKS 📏 Fork Length: 1,500 mm 📐 Fork Section: 250 x 60 mm 🛞 TYRES Front: 400/60-15 Rear: 465/55-20 ⚙️ EQUIPMENT ✅ Fully enclosed cabin ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Long-load transportation and storage 🚧 Narrow aisle operations 🏢 Indoor and outdoor applications 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are partnering with a company specializing exclusively in sideloaders, multidirectional forklifts, and professional material handling equipment. 🔍 Every machine undergoes a comprehensive technical inspection, full servicing, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. 🎯 WE PROVIDE Fgsdpfx Aezyty Isb Aog ✅ Full service before delivery ✅ Warranty coverage ✅ Professional technical support ✅ Leasing and financing assistance ✅ Transport organization ✅ Export documentation and customs support ✅ After-sales service 🏆 Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📞 CONTACT FT LOGISTICS Sp. z o.o. 🎥 We can arrange a live online demonstration, provide additional photos and videos, and prepare a customized transport quotation directly to your location. FT LOGISTICS 🚜 We Deliver Machines Ready for Work.

Condition: used, Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Rope diameter: 5 mm -Rope length: approx. 14000 mm -Cable length: 4500 mm Fsdpfx Asdvmblsb Aogg -with: service -Dimensions: 370/330/H450 mm -Weight: 30 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,729 h, load capacity: 14,000 kg, lifting height: 3,550 mm, free lift: 1,730 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,100 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 2,050 mm, fork length: 1,500 mm, fork width: 250 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 400/60-15, rear tire type: cushion tires (black), rear tire size: 465/55-20, overall weight: 29,250 kg, empty load weight: 15,250 kg, total height: 3,000 mm, total length: 3,000 mm, total width: 3,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 COMBILIFT C14000 | LPG | 3550 MM | HYDRAULIC FORK POSITIONER | FULL CABIN | READY FOR WORK ✅ FULLY SERVICED MACHINE ✅ WARRANTY INCLUDED 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT C14000 multidirectional forklift. The machine has been professionally serviced, thoroughly inspected, and extensively tested to ensure maximum reliability and performance. It is ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and demanding logistics environments. ⭐ KEY BENEFITS ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 3,729 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available 🔧 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 📌 Model: C14000 📅 Year of Manufacture: 2019 🏋️ Capacity: 14,000 kg 📍 Load Centre: 600 mm ⛽ Engine: Kubota LPG 🕒 Operating Hours: 3,729 h ⬆️ Lift Height: 3,550 mm ⚖️ Machine Weight: 15,250 kg 📐 DIMENSIONS 📏 Overall Height: 3,000 mm 📏 Construction Height: 3,100 mm 📏 Overall Length: 3,000 mm 📏 Overall Width: 3,300 mm ↔️ Fork Positioner Width: 2,050 mm 🔩 FORKS 📏 Fork Length: 1,500 mm 📐 Fork Section: 250 x 60 mm 🛞 TYRES Front: 400/60-15 Rear: 465/55-20 ⚙️ EQUIPMENT ✅ Fully enclosed cabin ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Long-load transportation and storage 🚧 Narrow aisle operations 🏢 Indoor and outdoor applications 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are partnering with a company specializing exclusively in sideloaders, multidirectional forklifts, and professional material handling equipment. 🔍 Every machine undergoes a comprehensive technical inspection, full servicing, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. 🎯 WE PROVIDE ✅ Full service before delivery ✅ Warranty coverage ✅ Professional technical support ✅ Leasing and financing assistance ✅ Transport organization ✅ Export documentation and customs support ✅ After-sales service 🏆 Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📞 CONTACT FT LOGISTICS Sp. z o.o. 🎥 We can arrange a live online demonstration, provide additional photos and videos, and prepare a customized transport quotation directly to your location. Fgjdozxtiyjpfx Ab Asg FT LOGISTICS 🚜 We Deliver Machines Ready for Work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,729 h, load capacity: 14,000 kg, lifting height: 3,550 mm, free lift: 1,730 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,100 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 2,050 mm, fork length: 1,500 mm, fork width: 250 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 400/60-15, rear tire type: cushion tires (black), rear tire size: 465/55-20, overall weight: 29,250 kg, empty load weight: 15,250 kg, total height: 3,000 mm, total length: 3,000 mm, total width: 3,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 COMBILIFT C14000 | LPG | 3550 MM | HYDRAULIC FORK POSITIONER | FULL CABIN | READY FOR WORK ✅ FULLY SERVICED MACHINE Fjdpfszw I Uhsx Ab Aogg ✅ WARRANTY INCLUDED 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT C14000 multidirectional forklift. The machine has been professionally serviced, thoroughly inspected, and extensively tested to ensure maximum reliability and performance. It is ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and demanding logistics environments. ⭐ KEY BENEFITS ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 3,729 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available 🔧 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 📌 Model: C14000 📅 Year of Manufacture: 2019 🏋️ Capacity: 14,000 kg 📍 Load Centre: 600 mm ⛽ Engine: Kubota LPG 🕒 Operating Hours: 3,729 h ⬆️ Lift Height: 3,550 mm ⚖️ Machine Weight: 15,250 kg 📐 DIMENSIONS 📏 Overall Height: 3,000 mm 📏 Construction Height: 3,100 mm 📏 Overall Length: 3,000 mm 📏 Overall Width: 3,300 mm ↔️ Fork Positioner Width: 2,050 mm 🔩 FORKS 📏 Fork Length: 1,500 mm 📐 Fork Section: 250 x 60 mm 🛞 TYRES Front: 400/60-15 Rear: 465/55-20 ⚙️ EQUIPMENT ✅ Fully enclosed cabin ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Long-load transportation and storage 🚧 Narrow aisle operations 🏢 Indoor and outdoor applications 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are partnering with a company specializing exclusively in sideloaders, multidirectional forklifts, and professional material handling equipment. 🔍 Every machine undergoes a comprehensive technical inspection, full servicing, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. 🎯 WE PROVIDE ✅ Full service before delivery ✅ Warranty coverage ✅ Professional technical support ✅ Leasing and financing assistance ✅ Transport organization ✅ Export documentation and customs support ✅ After-sales service 🏆 Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📞 CONTACT FT LOGISTICS Sp. z o.o. 🎥 We can arrange a live online demonstration, provide additional photos and videos, and prepare a customized transport quotation directly to your location. FT LOGISTICS 🚜 We Deliver Machines Ready for Work.

Condition: new, Fanuc A16B-1400-0131/11C board, unused, 100% functional. Fgsdpei D U Dmsfx Ab Aeg

Condition: used, Belt width variabel Fgodpfjd Ih Rbox Ab Ajg Belt length bis 14000 mm Total belt loading kg