Used Kraussmaffei Km 35-55 Cx for sale (23,044)

Condition: like new (used), mileage: 615,000 km, MERCEDES ANTOS 18-35, 2014, Euro 6, 615,000 km. Box body with side gates, dimensions 9.30 x 2.55 x 2.80 m, with hydraulic lift. Fifth wheel coupling. Automatic transmission. Full pneumatic braking system. Italian vehicle. Financing options available. Iodpfezc Ra Ssx Aateba BENITO: 3383844139 MICHELE: 3394588233

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) Ibedpfxjnygvro Aatja 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: used, Fröling Turbomatic TMC – Automatic Wood Chip Boiler (35–110 kW) Multiple Fröling Turbomatic TMC units in stock – immediately available. Output (kW) – Price (net, excl. VAT) 35 kW – €5,000 55 kW – €6,000 70 kW – €7,000 85 kW – €8,000 110 kW – €10,000 The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings, and pellets. ✔ Fully automatic operation ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feed auger (dosing screw), which automatically transports the fuel directly into the combustion chamber. The complete discharge system (fuel extraction from the storage room) is generally not included and is available separately. 👉 For the 110 kW model, the complete discharge system is already included in the price. ⸻ Technical highlights: • Lambda-controlled combustion for optimal efficiency and low emissions • Automatic grate with shaking and tilting function for clean combustion • Multi-pass heat exchanger with automatic cleaning (WOS system) • Automatic ash removal from combustion chamber and heat exchanger • Induced draft fan for maximum operational safety • Large combustion chamber with refractory lining for high temperatures and stable combustion ⸻ Further advantages: • Modular system – easy installation • Individual drives for all components → high reliability • Adaptable to various fuels and moisture levels ⸻ TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approximately 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators Iodpfx Aaowakktotjba • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from domestic to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Latest offers: Much of our current stock can be found on our website: topheatingsystems.com We also have additional equipment that is not yet advertised. 📅 Viewing: Warehouse visits are possible by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm Iedeylkxaspfx Aateba • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included)

Condition: good (used), Year of construction: 2013, screw diameter: 38 mm, Brand: Krauss Maffei Technologies GmbH Model: KME 38-30 Screw type: Single screw Iodpfxszuk Iro Aateba Year of manufacture: 2013 Screw diameter: 38 mm L/D ratio: 30 It is supplied without a screw and is in very good condition; the machine was never used in production.

Year of construction: 2000, condition: ready for operation (used), Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Ibedpfxjzcyqto Aatja

Condition: used, Year of construction: 2013, operating hours: 29,000 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Iedpfx Aoppigdoatjba Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: ready for operation (used), Year of construction: 2010, operating hours: 60,159 h, clamping force: 5,000 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details. • Clamping unit • Tool weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. tool diameter: 560 mm • Opening stroke: 1170 mm • Tool installation height: min 480 mm; max – • Max plate spacing: 1650 mm • Mounting plates (H × V): 1270 × 1200 mm • Clear column spacing: H 900 mm / V 800 mm • Centering ring diameter: 200 mm • Ejector • Stroke: 250 mm • Ejection force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Closing nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12-port USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. stroke volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticizing rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump power / Heating power: 90 kW / 44 kW • Other • Max. crane load: 10 tons • 2K-capable: no Ibjdpfxeyg Hz Ho Aatea • Filter nozzle/mill: no • It is a standard fully hydraulic 2-plate clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z present • 69,880 hours • Wittmann handling included • Optional: second unit from 2010 available, without Wittmann handling: 60,150 hours

Condition: used, Year of construction: 2006, machine/vehicle number: 61008535, This KraussMaffei KM950-6100 MX large injection molding machine will be auctioned off online as part of our industrial auction / machinery auction – Wirthwein Friedberg GmbH – machines, packaging, and other materials. Iedpfjzqymiex Aatsba You can find this and many other items on our platform.

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Iedpfx Aaehz Dyastoba

Condition: ready for operation (used), Year of construction: 2006, clamping force: 5,750 kN, screw diameter: 80 mm, injection weight: 1,304 g, Hydraulic injection moulding machine manufactured in 2006. This Krauss Maffei KM 575-2700 C2 features a clamping force of 575 t and a screw diameter of 80 mm. It offers a maximum platen stroke of 1750 mm and a minimum mold height of 600 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 575-2700 C2 machine we have for sale. Contact us for further details. • Injection pressure: 1829 bar • Platen dimensions: 1620 x 1470 mm • Tie-bar spacing: 1000 x 880 mm • Max. platen stroke: 1750 mm • Min. mold height: 600 mm • Centering ring: 200 mm • Ejector pin length: 550 mm Ibjdpfx Aozlynpeatoa • Ejector pin internal thread: M16 • Core pulls: 3 • Air blow: 2 • Hydraulically operated nozzles: No • Pneumatically operated nozzles: No • Number of hot runners: 12 • Max. injection volume: 1433 ccm • Sorting flap: No Additional equipment • Conveyor • Manipulator / Robot

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,000 h, clamping force: 1,250 kN, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,500 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details. Iodpfxozk D Nuo Aatjba • Screw diameter: 45.0 mm • Tie Bar spacing: 470 x 470 mm • Shot volume: 275.0 cm3 • 6 heating zones • Hydraulic core • Interface: Euromap 12 robot interface • Outer length: 745 mm • Outer width: 770 mm

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W Ibedpfxslvykxj Aatea -Voltage: 230/400V -Number: 1x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape, heating sleeve -Type: Ø240 x 135 mm -Item No.: 401 2258 -Heating power: 4200 W -Voltage: 230/400 V Ibjdpfx Aelvykmjatoa -Quantity: 2x heating tape available -Price: per piece -Dimensions: 290/255/H135 mm -Weight: 2.8 kg

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads Ibedpfjy Apdqsx Aatea \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: new, Year of construction: 2025, Clamping force: 1600 t Screw diameter: 70 mm Ibjdpfx Aoy Umpusatsa Shot weight: 1490 g Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 1232 cm3 Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2004, Twin-screw extruder, Krauss Maffei KMD63 model, for sale. The extruder is fully functional. The screws have been removed and can be inspected on site. - Year of manufacture: 2004 - C4 control system - The price applies to the extruder only, excluding any follow-up services. Ibsdpezr N Urjfx Aatea Loading, export documents, delivery, etc. can be arranged upon request. Please feel free to contact us if you have any questions.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Krauss Maffei, type KMD90, for sale. The extruder is fully functional and can be inspected on site. - C5 control system - Year of manufacture: 2004 Iodpfx Aszr N T Usateba Loading, delivery, export documents, and more are available upon request. Please feel free to contact us with any questions.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Operating hours in automatic mode: 60,000 h Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Injection unit Screw diameter: 80 mm Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Ibedpfx Aaezgwa Eotoa Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Net weight with control cabinet: 27,090 kg Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,400 mm, travel distance Z-axis: 6,000 mm, Krauss Maffei linear robot Iedpfjyk S Ndox Aatsba Year of manufacture: 2014 X-axis: 1500 mm Y-axis: 2400 mm Z-axis: 6000 mm

Condition: excellent (used), Year of construction: 2020, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Clamping unit: toggle Isdezpariepfx Aatoba Control system: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 121-380 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Ijdpfx Aaezpaqxotsba Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 470x420 mm Platen size: 640x590 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection molding unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 9400 kg Length/Width/Height: 5.10x1.60x1.88 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 161-540 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 40 mm Shot weight: 206 g Injection pressure: 2377 bar Dosing volume: 226 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x470 mm Platen size: 710x660 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Ijdpfszpap Iox Aatoba Operating hours: approx. in automatic operation Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control with hot runners x 15 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servomotor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 13200 kg Length/Width/Height: 5.60x1.72x1.95 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: used, Year of construction: 1998, operating hours: 101,215 h, machine/vehicle number: 23J01415, clamping force: 23,000 kN, injection weight: 6,100 g, total length: 4,500 mm, total height: 3,800 mm, overall weight: 205,000 kg, # Sales Description A high-performance injection molding machine from the renowned manufacturer KraussMaffei is available for sale. This is the KM 2300-14700 MC model, designed for large-volume plastic parts and industrial series production. The machine features a clamping force of 23,000 kN and is equipped with a screw diameter of 105 mm and a maximum shot weight of 6,100 g. This makes it particularly suitable for applications involving large components and high material volumes. The system is equipped with extensive peripherals, including a robot interface for KUKA KRC4, a sequential injection controller S.I.S.E. IS’Tech, cooling units from GWK, and a Motan Colormetric dosing and mixing system. In addition, a belt conveyor is included. The machine was manufactured in 1998 and has been in an industrial production environment. Ibodpfx Aeyt Hidsatoa Key technical data: * Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) * Year of manufacture: 1998 * Operating hours: approx. 101,215 h Technical specifications: * Clamping force: 23,000 kN * Screw diameter: 105 mm * Max. shot weight: 6,100 g * Machine weight: approx. 205,000 kg * Machine dimensions: * Depth: approx. 4,500 mm * Height: approx. 3,800 mm This machine offers a solid and proven solution for industrial plastic processing and is particularly interesting for companies requiring large-format injection molding capacity.

Condition: good (used), Year of construction: 2016, Synchronization of the saw carriage - 6 pieces available Ibodjuzxrgjpfx Aatoa