Used Kasto Ubs 280 for sale (2,556)

Condition: used, mileage: 29,800 km, power: 115 kW (156.36 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/1981, next inspection (TÜV): 09/2027, color: red, number of seats: 2, Equipment: all wheel drive, Original early fire service G-Class from second ownership, which has never been used for civilian purposes. TÜV and H-certification (according to §23 StVZO) passed in September 2025. Roadworthiness inspection (HU) valid until 09/2027 ("no defects found", approved by DEKRA). Year of manufacture: 1981 / First registration: 07-1981. Original mileage only 29,800 km. Used exclusively for fire service duty to date. Rapid Intervention Vehicle (VRW) with ZIEGLER bodywork and Knurz-Kirsch generator with 5 kVA capacity. German garage-kept vehicle, equipped with the original registration document (only 2 previous owners), continuously registered until autumn 2025. Manufacturer stated in the original papers as GFG "Geländefahrzeug-Gesellschaft", then a joint venture between Daimler-Benz and Steyr-Daimler-Puch in Austria. This is one of the last vehicles produced under this manufacturer designation; shortly afterwards, "Daimler-Benz" was listed as the vehicle manufacturer in the registration papers. In 1991, a complete MATTER roll cage was installed in the vehicle (properly recorded in the documents). Includes a small roof rack system for transporting long equipment items. The long 280 GE is the largest and most powerful model of the first G-Class series that could be ordered ex-factory as a Mercedes G-Class in the early years. The M110 inline six-cylinder petrol engine with 2,717 cc and 115 kW / 156 hp starts and runs well. 4-speed manual transmission with differential locks. Power steering. Njdpfxsxthdzs Amnolb Maximum speed registered at 155 km/h. A power take-off is installed for operating the generator. The last primary use was transporting a portable pump (TS) along with suction hoses and accessories. Therefore, there are no rear seats and a cargo area similar to a truck. Unfortunately, no additional seats remain apart from the 2 front seats. According to the original documents, this is a "3-seater" and the vehicle registration type is listed as "Other special-purpose vehicle, fire service rapid intervention vehicle (VRW)." Unladen weight is specified as 2,360 kg. Permissible total weight (originally 2,900 kg) was increased in 1991 to 3,030 kg as per the records. Therefore, this 280 GE currently has a payload capacity of 670 kg. Overall vehicle dimensions: Length 4,395 mm / Width 1,700 mm / Height 2,150 mm. Tires: 205/80R16, in good condition. Fitted with winter tires bearing the snowflake symbol in accordance with current legal requirements (DOT 2018). The G does not have a tow hitch, but it is equipped with the necessary mounting bracket. Retrofitting/towing capacity information cannot be supplied, as the relevant fields for towing capacity in the original registration document are marked as "not applicable." According to oral information from the last owner, the Mercedes is accident-free; however, this cannot be documented in writing and is therefore passed on to the buyer as an oral statement only. The 280 GE was driven a considerable distance on the motorway to us and completed the journey without any issues. A new battery has just been installed. The off-road vehicle is immediately available and ready for new tasks. This offer is only valid for commercial customers, freelancers, public authorities, emergency services, agriculture, forestry, and similar self-employed professionals. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors excepted.

Condition: used, Knapp roller conveyor 2200-350-280 Nedpfxeu Rii Uo Amnjlb RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Nledju Rii Ijpfx Amnob Your specialist and contact for intralogistics

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe, manufactured in 1995, complying with CE standards FANUC 0-T CNC control Flat guides ASA 6" Bar capacity: 62mm Maximum turning diameter over bed: 600mm Maximum turning diameter: 250mm Maximum turning length: 630mm Maximum spindle power: 15Kw Weight: approximately 5,000 Kg. Complete with: Nlsdpfx Amjy S R Ayeneb Hydraulic chuck Tailstock 12-position automatic tool turret Chip conveyor

Condition: used, mileage: 795,377 km, power: 206 kW (280.08 HP), first registration: 11/2012, fuel type: diesel, overall weight: 25,700 kg, axle configuration: 3 axles, color: red, gearing type: semi-automatic, emission class: euro5, loading space volume: 47 m³, loading space length: 9,000 mm, loading space width: 2,500 mm, loading space height: 2,100 mm, Year of construction: 2012, Equipment: ABS, electronic stability program (ESP), parking heater, tail-lift, VEHICLE HISTORY * German vehicle * Immediately available * Internal reference number: Scania SN (59) VEHICLE EQUIPMENT * Refrigerated box body * Kiesling bodywork * Insulated body with refrigeration unit * Mitsubishi refrigeration unit * Semi-automatic transmission with clutch pedal * Engine brake * Stationary air conditioning * Auxiliary heater (parking heater) * Steering axle * Lift axle * Steerable lift axle * Full air suspension * 1 x fuel tank TAIL LIFT * BÄR tail lift * Type: BC 2000 S4 * Lifting capacity: 2,000 kg FURTHER INFORMATION * First registration: 26.11.2012 * Mileage: 795,377 km * Power: 206 kW / 280 HP * Displacement: 9,290 cm³ * Fuel type: Diesel * Axle configuration: 6x2 * Permissible gross weight: 25,700 kg * Unladen weight: 7,100 kg * Payload: 18,600 kg * Body length: approx. 9.00 m * Body width: approx. 2.50 m * Body height: approx. 2.10 m * Tire size: 315/70 R22.5 * Vehicle immediately available * Vehicle ready for operation without delay Nedpfx Amey Tf Uysnslb EXPORT / NOTICE * Export sales only with deposit (min. €500 to €2,000) * Export declaration EXW possible within 10 minutes (authorised exporter) * Vehicle reservations only in writing * Verbal commitments are non-binding * Subject to modifications, errors, and prior sale LEGAL NOTES * This advertisement does not constitute a binding offer within the meaning of § 145 BGB * It is intended solely to initiate a contract * All information is provided without guarantee * No warranted characteristics * Sale is subject exclusively to our Terms and Conditions

Condition: used, Year of construction: 2019, operating hours: 1,379 h, functionality: fully functional, empty load weight: 16,650 kg, fuel type: diesel, lifting height: 27,730 mm, drive type: Diesel, construction width: 2,480 mm, Articulating boom lift Technical condition: very good Front tyres type: solid rubber Front tyres condition: 80–100% Rear tyres type: solid rubber Rear tyres condition: 80–100% Battery condition: 80–100% CE certificate, Gradeability: 40% Travel speed – transport mode: 4.50 km/h Travel speed – work mode: 0.80 km/h Permissible tilt in work mode: 4° Nedpovgh S Nsfx Amnslb Hydraulic pressure: 400 bar

Condition: excellent (used), Working height: 100 mm Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Round steel: 25 mm Nledoydbfhjpfx Amnob Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Required space: 500 x 600 mm

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions Nlsdpfx Ascuntzomnob

Condition: new, Precision cycle lathe with Siemens Sinumerik 828 D control system Brand: GDW Model: C 280 Z conturline with quick-change tool holder size B Condition: New machine Built to the highest safety standards Standard equipment includes: - LED tube light - Electromechanical holding brake for the main spindle, programmable or operable via push button on the control panel - Coolant system - Quick-change tool holder size B, including one turning tool holder size B - Reducing sleeve for main spindle internal taper ME 50 / MT 3 - Protection flange for spindle head DIN 55027-5 - 2 fixed center points MT 3 - Set of operating tools with tool bag, set of keys, grease gun - Operating manual with spare parts lists, electrical documentation in paper and CD format Nlsdpfx Aoxy Ryfsmnsb

Condition: new, Precision master lathe and traction spindle lathe Make: GDW Model: LZ 280 VS comfortline Condition: new machine with infinitely variable speed control and infinitely variable feed control to the highest safety standard tip height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm standard equipped with: The basic price already includes the latest display generation "comfortline", which contains many innovations and simplicity: - 9'' TFT colour screen - Technology memory for 99 tools - Oriented spindle stop via teach-in button - Input of constant speed or constant cutting speed (V = c) - Speed limitation selectable - Error and status display in plain text - Feed rate and thread pitch input by means of image-supported masks - Thread cutting therefore does not require any Change wheels more exchanged or even be purchased in addition to all the usual to be able to cut threads! is still included in the standard: - LED machine light, integrated in machine casing Nledpscunqgjfx Amnsb - Quick-change tool holder size A with turning tool holder - Leadscrew disconnection with key - Braking device for main drive - Feed protection hood movable with limit switch monitoring - Spaeneschutz rear wall removable - Spray guard cover movable - Spa tub can be pulled out - Single bed stop (fixed stop lengthwise) - centralized lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle

Condition: new, Precision master lathe and draw spindle lathe Make: GDW Model: LZ 280 VS-G basicline Condition: new machine with infinitely variable feed control to the highest safety standard Centre height: 165 mm Centre distance: 670 mm Spindle bore: 43 mm standard equipped with: GDW control panel with feed potentiometer - Display of the travel direction - Display of spindle speeds - Teach-in for traverse path during thread cutting - Input of feed and thread pitches - Thread pitches Metric, inch, module, DP GDW 3-axis positioning display Njdpfjfbmlisx Amnolb - 6" TFT colour display - Radius / diameter display - Tool memory for 100 tools - Changeover mm / inch - Axle coupling Z / Zo - cone calculation - pocket calculators - Graphical input help - USB port - Automatic standby mode is still included in the standard: - LED machine light, integrated in machine casing - Quick-change tool holder size A with turning tool holder - Lead screw disconnection with key - Braking device for main drive - chuck guard movable with limit switch monitoring - Removable chip guard rear panel - Spray guard cover movable - chip tray can be pulled out - Single bed stop (fixed stop lengthwise) - centralized lubrication - Reducing sleeve for main spindle internal taper ME 50/MK 3 - Protective flange for spindle head DIN 55027-5 - 2 fixed centering points DIN 806-MK 3 - Set of operating tools with tool bag, set of keys, oil press - 5 Spare shear pins - 2 Operating instructions

Condition: like new (used), Year of construction: 2015, GDW LZ 280 VC Lathe GDW LZ 280 VC with GDW digital display, year of manufacture 2015, in very good original condition. The machine comes from the special construction division of a renowned German engineering company. CE-compliant!! Technical Data: Year of manufacture: 2015 📐 Working Area & Dimensions • Center height: 165 mm • Distance between centers: 670 mm • Swing over bed: 330 mm • Swing over cross-slide: 190 mm • Bed width: 220 mm • Machine weight: approx. 1,100 kg • Footprint (L x W x H): approx. 1,570 x 1,035 x 1,800 mm ⚙️ Main Spindle & Drive • Speed range: 30 – 5,000 rpm (infinitely variable) • Drive power: 7.0 kW to 7.5 kW • Spindle bore: 43 mm • Spindle nose: DIN 55027 (size 5) 🛠️ Carriage & Tailstock • Cross slide travel: 165 mm • Top slide travel: 115 mm • Swivel range of top slide: +75° / -65° • Tailstock taper: MT 3 About the Machine: The GDW LZ 280 VC is the smallest machine in the GDW range. It is a lathe designed for the highest demands, featuring stepless speed control, constant cutting speed, and an impressive 7.5 kW drive power (at 40% duty cycle). This compact powerhouse excels in environments where space is at a premium but maximum precision is required, such as optics workshops, electrical and automotive workshops, laboratories, and even in Formula 1. Offered here is a GDW LZ 280 VC lathe with GDW digital display, year 2015. This lathe is in very good original condition. It comes from a company where it was only used occasionally for special construction projects. The machine features a very user-friendly control system. The guideways are regularly lubricated via central lubrication. The GDW LZ 280 VC has been mechanically and electrically tested by us. Take the opportunity to inspect and test the GDW LZ 280 VC under power on site. You can find more lathes from reputable manufacturers on our website. Nedsy Sbqnepfx Amnelb

Condition: used, mileage: 149,900 km, power: 206 kW (280.08 HP), first registration: 05/2016, fuel type: diesel, empty load weight: 9,180 kg, maximum load weight: 9,820 kg, overall weight: 19,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 54 m³, loading space length: 9,510 mm, loading space width: 2,470 mm, loading space height: 2,310 mm, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, DAF LF 280 Box Body E6 - Box body - Dimensions: 9.51 x 2.47 x 2.31 m - Tail lift - Automatic transmission - Cruise control - ABS/ASR/ESP - Lane departure assistant - Air conditioning - Leaf-air suspension - EURO 6 - Payload: 9,820 kg Njdpfx Asxtqk Rsmnelb - Tyres: 315/70R22.5 Very good condition, German vehicle. Export price.

Condition: used, mileage: 28,100 km, power: 96 kW (130.52 HP), first registration: 08/2021, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro6, Equipment: central locking, electronic stability program (ESP), soot filter, Ford Transit, first owner 2 sliding doors Registration: 08/2021 Mileage: 28,100 km MOT/Inspection: - Net selling price: €11,750 Further equipment details below! For sale to commercial businesses only (agriculture, freelancers, small and large businesses) or for export. ----If you have any questions, please contact Christian Hirsch: or our friendly staff. Opening hours and further information: Visits possible without prior arrangement: Mon - Thu: 9:00 am to 4:00 pm Fri: 9:00 am - 1:00 pm Sat: 9:00 am - 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Germany If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. Special equipment: Audio system 21: Digital radio (DAB/DAB+) with 8" multifunction display, Programmable battery monitoring, 240 A generator, Rear tailgate without glazing, LED cargo area light, Cargo area protection package, Tire repair kit, Rearview camera with color display, Sliding door, loading/passenger compartment, left, Sliding door, loading/passenger compartment, right, Visibility package 1, Interior trim in loading/passenger compartment: wood, Fleece battery 80 Ah (AGM, 2 batteries) Further equipment: Driver's airbag, Trailer stabilization program (TSA), Audio system 13: Digital radio (DAB/DAB+) with 4" multifunction display, Audio system: Radio with USB and Bluetooth hands-free system, Exterior mirrors, electrically adjustable and heated, Turn signal integrated into exterior mirror, Floor covering: vinyl in loading/passenger compartment, On-board computer, Door entry lights, Electronic brake force distribution (EBD), Electronic traction control, Driving assistance system: Hill start assist, Driving assistance system: Emergency brake assist, Driving assistance system: Crosswind assist, Lockable glove compartment, Interior lights in the driver's cabin: front reading light, Interior filter: pollen filter, Body/structure: van, Body variant: normal roof, Radiator grille black/gray, Steering column (steering wheel) adjustable in height and length, Truck registration, Model refinement, engine 2.0 L - 96 kW TDCi CAT, Parking pilot system, Parking pilot system front and rear with camera, Digital radio reception (DAB+), Wheelbase 2933 mm, Spare wheel in driving condition, Low emissions according to Euro 6 emissions standard, Low emissions according to Euro 6d emissions standard, Windshield wipers with intermittent operation, adjustable, headlights H4, Mud flaps front and rear, Side protection strips, Seat package 13: Driver's seat (4-way adjustable) - double passenger seat, Fabric, steel rims 6.5x16, Start/stop system, Bumpers partially painted, Njdpfx Ajvh S H Tsmnelb Style color package, Daytime running lights LED, Trend, Interior trim in loading/passenger compartment: half-height, Tie-down eyes (8), Heat-absorbing tinted glass, Auxiliary heating, electric Please, no emails. Please, no emails. Due to time constraints, we can only process them sporadically. Thank you. If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. If you have any questions: Automotive engineering master technician: Christian Hirsch: More offers at: The equipment was determined with the help of a VIN query; technical errors may occur. Information on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission erro

Condition: used, Year of construction: 2025, total length: 11,350 mm, - Arbeitshöhe 27.73 m - Plattformhöhe 25.73 m - Max. Reichweite 21.45 m - Vertikaler Drehbarer Korbarm (oben / unten) +56.80 ° / -62 ° - Tragfähigkeit des Arbeitskorbs / maximale Korblast 240 kg / 350 kg - Drehung des Oberwagens 360 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Zulässige Personenanzahl (innen / außen) 3 / 2 - Gegengewicht Versatz (Oberwagen bei 90°) 1.43 m - Gegengewicht Aufmaß / Reichweite 1.45 m - äußerer Wenderadius 4.35 m - Fahrgeschwindigkeit - Transportmodus 4.50 km/h - Fahrgeschwindigkeit - Arbeitsmodus 0.80 km/h - Steigfähigkeit 35 % - Zulässige Neigung im Arbeitsmodus 4 ° - Bereifung Vollgummireifen aufvulkanisiert Nlodpey Nfldsfx Amnsb - Antriebsräder (vorne / hinten) 2 / 2 - Lenkräder (vorne / hinten) 2 / 2 - Gebremste Räder / Räder 2 / 2 - Hersteller / Motormodell Yanmar - 4TNV88C - Motornorm Stage V - Nennleistung Verbrennungsmotor / Leistung 46 Hp / 34.30 kW - Bodendruck 21.30 dan/cm2 - Hydraulikfördermenge – Hydraulikdruck 400 bar - Fassungsvermögen des Hydrauliktanks 94 l - Fassungsvermögen des Kraftstofftanks 76 l - Umgebungsgeräusch (LwA) < 106 dB - Schwingungsbelastung Hand/Arm < 0.50 m/s²

Condition: used, Year of construction: 2025, total length: 11,350 mm, - Arbeitshöhe 27.73 m - Plattformhöhe 25.73 m - Max. Reichweite 21.45 m - Vertikaler Drehbarer Korbarm (oben / unten) +56.80 ° / -62 ° - Tragfähigkeit des Arbeitskorbs / maximale Korblast 240 kg / 350 kg - Drehung des Oberwagens 360 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Zulässige Personenanzahl (innen / außen) 3 / 2 - Gegengewicht Versatz (Oberwagen bei 90°) 1.43 m - Gegengewicht Aufmaß / Reichweite 1.45 m - äußerer Wenderadius 4.35 m - Fahrgeschwindigkeit - Transportmodus 4.50 km/h Nlodpfx Ajy Nfk Tsmneb - Fahrgeschwindigkeit - Arbeitsmodus 0.80 km/h - Steigfähigkeit 35 % - Zulässige Neigung im Arbeitsmodus 4 ° - Bereifung Vollgummireifen aufvulkanisiert - Antriebsräder (vorne / hinten) 2 / 2 - Lenkräder (vorne / hinten) 2 / 2 - Gebremste Räder / Räder 2 / 2 - Hersteller / Motormodell Yanmar - 4TNV88C - Motornorm Stage V - Nennleistung Verbrennungsmotor / Leistung 46 Hp / 34.30 kW - Bodendruck 21.30 dan/cm2 - Hydraulikfördermenge – Hydraulikdruck 400 bar - Fassungsvermögen des Hydrauliktanks 94 l - Fassungsvermögen des Kraftstofftanks 76 l - Umgebungsgeräusch (LwA) < 106 dB - Schwingungsbelastung Hand/Arm < 0.50 m/s²

Condition: good (used), mileage: 127,867 km, power: 207 kW (281.44 HP), first registration: 12/2013, fuel type: diesel, tire size: 315 / 80 / R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: air, number of seats: 3, total length: 10,300 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, soot filter, General information Model code: ## Cab: Lowliner, half sleeper Technical information Number of cylinders: 5 Engine capacity: 9.261 cc Transmission Transmission: Scania, 6 gears, Automatic Axle configuration Tyre size: 315 / 80 / R22.5 Make axles: Scania Brakes: disc brakes Suspension: air suspension Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 1: Lift axle; Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 17.050 kg Carrying capacity: 9.450 kg GVW: 26.500 kg Functional Make of bodywork: Haller X2C MEKAV Pump: Yes Interior Interior: grey Maintenance APK (MOT): tested until 12/2026 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 3 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = Nedpfx Aoy H Arvemnolb - 12 volt socket - Baggage cover - Car kit - Low-noise - Particulate filter - Power take-off (PTO) - PTO - Radio/CD player - Reversing camera - Speed limiter - Stability control - Visor

Condition: used, mileage: 44,200 km, power: 100 kW (135.96 HP), first registration: 04/2024, fuel type: diesel, maximum load weight: 850 kg, overall weight: 2,800 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,600 mm, loading space height: 1,350 mm, Year of construction: 2024, - Used Truck: Ford Custom 280 Van L1 Titanium. - Registration: April 2024, Engine: 2.0 EcoBlue 136hp Euro 6d, 6-speed gearbox, Mileage: 44,200 km. - Van / L1 Cargo Van, Load compartment dimensions: 2,600 x h. 1,350 mm, Bulkhead with long load opening (530 mm), Fully lined load area. - Titanium Trim, equipped with: Automatic climate control, SYNC 4 Touch with Apple Carplay / Android Auto Wireless, USB, Bluetooth, Front & rear parking sensors and rear-view camera, Cruise control, LED headlights, Alloy wheels, Folding mirrors, Keyless entry and start, Two keys, Spare wheel. Nledpfx Amoy Uhnlonjb - Bodywork and interior as new, 12-month dealer warranty on mechanics. - NEW front and rear tyres. Single-owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 Sales consultants: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:00 - Certified mileage. - Test drive available by appointment. - Ownership transfer on site. - Personalized financing options available. Carlo Mauri Srl accepts no liability for any unintentional discrepancies in this advertisement, which does not constitute any contractual obligation. Displayed prices are excluding VAT and registration/ownership transfer costs.

Condition: used, From € 265,45 now for € 238,91. Now with a 15% discount. Batch offer consisting of 32 used plastic Euro-standard stacking bins. Njdpfxjx Ahqao Amnolb Designed for intensive and professional use, offering a reliable storage solution in logistics, automotive, and manufacturing environments. Thanks to its Euro standard dimensions of 600 x 400 mm, the

Condition: excellent (used), functionality: fully functional, mileage: 642,989 km, power: 206 kW (280.08 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 8,590 kg, maximum load weight: 7,410 kg, overall weight: 16,000 kg, tire size: 285/70R19.5, axle configuration: 2 axles, wheelbase: 4,700 mm, axle spacing: 4,700 mm, next inspection (TÜV): 03/2027, fuel: diesel, brakes: retarder, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 8,600 mm, total width: 2,600 mm, total height: 3,200 mm, loading space volume: 31 m³, loading space length: 6,450 mm, loading space width: 2,450 mm, loading space height: 1,980 mm, Year of construction: 2008, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, compressor, cruise control, differential lock, fog lights, full service history, onboard computer, parking heater, power assisted steering, retarder, seat heater, soot filter, tachograph, tail-lift, truck registration, Model: VOLVO FL-280 4x2 16Tons EURO5 with roll-up doors Tail lift: ZEPRO Z 200-136 MA Load capacity: 2,000 kg First registration: 25.11.2008 Mileage: 642,989 km Engine power: 206 kW Displacement: cm³ Nlodjy Rz Dxepfx Amnjb Auxiliary heater Antenna Radio/cassette/CD/MP3 Air conditioning Air-suspended, fully adjustable seats with seat heating Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beams Hazard lights Storage box Aluminum fuel tank Emission class: EURO 5 AdBlue Retarder/intarder/engine brake Drive configuration: 4x2 Differential lock Wheelbase between axle 1 and axle 2: 4,700 mm Tyre size front axle (1): 285/70R19.5 Tyre size rear axle (2): 285/70R19.5 Leaf/air suspension Wheel covers Unladen weight: 8,590 kg Payload: 7,410 kg Gross vehicle weight: 16,000 kg Overall vehicle dimensions (L x H x W): 860 cm x 320 cm x 260 cm Body dimensions, external or internal (L x H x W): 645 cm x 198 cm x 245 cm Cargo space volume: 31 m³ All our vehicles listed are generally provided with valid technical inspection (TÜV) and emissions test certificates. Usually these are foreign inspection documents, which are sufficient for obtaining export number plates. For a technical inspection (TÜV) and emissions test according to German standards, please clarify with us on a case-by-case basis. You can also contact us for further information and photos via WhatsApp, Telegram, Viber, and Signal. Please call us directly or send us a message via WhatsApp! German (Deutsch): We speak German and English, but feel free to send us a message in your language! English: We speak German and English, but feel free to send us a message in your language! Español: Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português: Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français: Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italiano: Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский: Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! العربية: نحن نتحدث الألمانية والإنجليزية، لكن لا تتردد في إرسال رسالة إلينا بلغتك! دری: ما به آلمانی و انگلیسی صحبت می‌کنیم، اما می‌توانید پیام خود را به زبان خود برای ما ارسال کنید! Trade-in possible! Net price! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can arrange worldwide shipping for your vehicle! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier's declaration, export document preparation, and customs number plate creation, if required. Viewings and test drives are possible anytime, including weekends, by prior telephone arrangement! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and equipment of the goods/vehicles. All information is provided without guarantee. Subject to changes, prior sale, and errors.

Condition: excellent (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, universal drill head, boring tool, faceplate -Manufacturer: Schmid, Plan and boring head -Type: UBS Gr.1 -Recording: SK40 -Setting accuracy: 0.02 and 0.01 mm -Accessories: see photos -Case dimensions: 240/125/H100 mm Nljdsrzvwwjpfx Amnjb Total weight: 4.0 kg

Condition: used, Year of construction: 2023, gebraucht 2023 6242 prompt, Zwischenverkauf v Italien 5400 € 1 Schwenkrahmen 2450x27x0,9 mm 35/70 m/min 220 mm 220 mm 260x140 mm rund 160 mm, quadrat 155 rund 95 mm, quadrat 95 mm 965 mm 1200 mm Nljdpewiqpzsfx Amnob 1100 mm 1860 mm 240 kg demo machine / mint condition net price (price for new machine € 6.730,00) manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment OPTIONS: Roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control: Siemens 840 D Nljdpfx Amsy Nzh Ujneb Travel distance X-axis: 1,000 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 800 mm Tool changer: 80-fold Tool holder: HSK 80 Max. tool weight: 25 kg Max. tool length: 500 mm Max. tool diameter: 228 mm Spindle speed up to: 6,000 rpm Pallet dimensions: 630 x 630 mm

Condition: used, Year of construction: 2014, gearing type: other, first registration: 01/2014, color: orange, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, clearing width approx. 2800 mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors! Nlodpfoy Ralbjx Amneb

Condition: used, mileage: 299,960 km, power: 206 kW (280.08 HP), first registration: 02/2019, fuel type: diesel, empty load weight: 9,530 kg, maximum load weight: 9,470 kg, overall weight: 19,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 65 m³, loading space length: 9,230 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, trailer coupling, Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders; therefore, you will generally find the export price listed in our ads, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures it is regularly updated. This information is intended as non-binding general guidance and does not replace detailed, individual advice when making a purchase decision. Only the terms stipulated in the purchase contract are binding. Subject to change, error, typographical mistakes, and prior sale. Only our general terms and conditions apply. Languages - We speak English Nljdpfxjyckg Ss Amnsb - On parle français - ?? ????? ?? ???? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano