Used Kang Chyau Blow Molding Machine for sale (65,348)

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Rcodpfx Asx Eitbob Eed Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Year of manufacture: 1998 Serial number: 173062 Control system: Arburg Selogica Rsdox Eiq Hjpfx Ab Ejcd Screw diameter: 18 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Year of manufacture: 2011 Serial number: 218960 Control system: Rcodpfox Eithox Ab Eed Control type: Arburg Selogica Clamping unit: Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Year of production: 2010 Rcjdex Eirqjpfx Ab Ejd Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Screw diameter: 18 mm

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1998 Machine number: 174514 Type / Model: 420-1000-350 Operating hours: 65,000 h Automatic operating hours: 57,000 h Clamping force: 100 t Opening stroke: 500 mm Control system: Selogica Tie bar spacing: 420 x 420 mm Platen dimensions: 570 x 570 mm Minimum tool height: 250 mm Maximum distance between platens: 750 mm Screw diameter: 40 mm Maximum injection volume: 182 cm³ Rjdpfx Aszl Dyceb Eecd Shot weight: 153 g Holding force: 5 t Connection: 33.4 kW Accessories/Equipment: 2 core pulls, handling connection, pneumatic air valve Condition: good Weight: 3.43 t Dimensions: 3,200 x 1,100 x 1,800 mm

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Clear opening (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool installation height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Rjdpfx Absxu Uvaj Eecd Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement volume: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed Standard / Option: 1/min. 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inch) for data backup Plasticization: 1 complete thermoplastic plasticization unit in wear-resistant design, screw diameter 70 mm with Backflow preventer and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 22726

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Rjdpfxjx Uqb Ie Ab Escd Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: new, Engel bimetallic screw cylinder, new and unused Rcedsx Up U Tjpfx Ab Eod Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Unit 5550: 3700 cm3

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Rcodpfxex Up Ute Ab Esd Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Model: HM 10000-9200 Control system: UNILOG B4 Year of manufacture: 2003 Operating hours: 67,092 h Technical data – Clamping unit Clamping force: 10,000 kN Tie bar spacing (h x v): 1120 x 1400 mm Platen size (h x v): 1960 x 1690 mm Minimum mold height: 550 mm Maximum mold height: 1,020 mm Maximum daylight: 2,120 mm Opening stroke: 1,100 mm Ejector stroke: 300 mm Ejector force: 118 kN Movable platen centering diameter: 250 mm Fixed platen centering diameter: 315 mm Technical data – Injection unit Screw diameter: 120 mm Shot volume: 5,655 cm³ Injection pressure: 1,632 bar Screw length: 22 L/D Screw stroke: 500 mm Screw speed: 130 min⁻¹ Screw torque: 11,370 Nm Plasticizing rate: 144 g/s PS Free discharge plasticizing rate: 1,144 g/s PS Rcjdpfxjx Up Rho Ab Ejd Number of heating zones: 8 Nozzle stroke: 700 mm Dimensions & Weight Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg Equipment Display language: German CompactFlash drive 4x hydraulic core pulls Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler 16x mold heating circuits

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Redpfx Abjx Up Rne Ejcd Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive Rcjdpezqdibjfx Ab Esd C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Rcedpfx Aozqdagjb Eed Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm Rsdoxwva Eopfx Ab Eocd - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive An inspection can be arranged at any time by appointment.

Condition: used, Year of construction: 2007, screw diameter: 40 mm, Clamping force: 80 t Year of manufacture: 2007 Injection unit: 250 Screw diameter: 40 mm Specific injection pressure: 1390 bar Injection volume: 185 cc Tool closing system: 800 Clamping force: 80 t Distance between columns: 370 x 370 mm Ejector force: 40 kN Tool height: 250 mm Opening stroke: 440 mm Ejector stroke: 150 mm Weight: 3180 kg Year of manufacture: 2007 Control system: Selogica Redpfx Abszqarxe Eecd Tooling: 2 x hydraulic core 5 heating zones for the mold Rotameter

Condition: excellent (used), Year of construction: 1998, Min. tool mounting height: 200 mm Max. plate distance: 550 mm Column spacing: 270 x 270 mm Screw diameter: 15 mm Clamping force: 400 kN Includes temperature control unit Includes handling robot The machine is in very good condition and is operational. Rodszkfh Sspfx Ab Eecd

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Rodpfx Abozkfd Tj Eecd Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Delivery does not include attachments/accessories. The machine is in very good condition and is powered on.

Condition: used, Year of construction: 2010, machine/vehicle number: PR28, Used SACMI OIMA 350T injection molding machine - Year 2010Technical Specifications & Performance DataThis injection molding machine for PET preforms is a high-output cell engineered for beverage production and industrial packaging applications. Manufactured by OiMA, it combines robust clamping performance with precise injection control and a complete set of auxiliaries for reliable second hand operation within a used bottling line context.Manufacturer: OiMA S.p.A.Model: 6500.350Application: PET preform production for beverage packagingClamping force: 350 tonInjection volume: 4500 cm³ per 100 MPaInstalled power: 436.58 kWPower supply: 400 V, 50 HzMachine mass: 20,000 kgPress year: 2014Mold: SACMI PPM 072 H, 72 cavities, 34 g preforms, neck type Alaska Blue PRE 342Year: 2010Mold temperature: 8–12 °CMold mass: 9,720 kgAuxiliaries included: Sytrama REV 156 PET take-out robot; Plastic System dehumidifier; Plastic System hopper H6000H; Plastic System mold-area dehumidifier DSH 2004 MIC DISP; conveyor; palletizing systemMaterial processed: PETAdvanced Automation & Control SystemsThe cell integrates a Sytrama REV 156 PET robot for automatic take-out and part handling, supporting stable cycle times and consistent product quality. The machine is equipped with an electric charging unit and hydraulic accumulators for fast, repeatable injection phases. Operator-friendly controls and interlocked safety guards help streamline setup and routine operation.Automated take-out and transfer via Sytrama robotAccumulator-assisted injection for stable, fast cyclesIntegrated dehumidification and material handling for resin conditioningElectrical specifications: 400 V, 50 HzEngineered for quick, repeatable mold changes and efficient maintenance accessProduction Line Integration CapabilitiesThis injection cell can operate as a standalone preform production unit or be integrated upstream of stretch blow molding in a PET production line. The included dehumidifiers, hopper loader, conveyor, and palletizing system simplify in-plant logistics and align with broader bottling equipment and packaging machinery workflows.Standalone or inline operation with PET packaging linesDehumidification and hopper loading optimize PET resin preparationConveyor and palletizing system support downstream handling and warehousingIdeal for beverage production environments targeting consistent preform supplyMachine Condition & Maintenance HistoryThis second hand injection molding machine is presented in operational condition and ready for immediate use after standard site preparation and commissioning. The core press is year 2014, with the SACMI mold and auxiliaries from 2010, providing a balanced mix of robust mechanics and proven proce... Redpjzktdbefx Ab Eocd

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Rcodpfxoy Snaps Ab Eod Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Ausstattung: .Kernzug -Roboter

Condition: used, -Model: Regamat R92 -Manufacturer: Winkler -Serial No.: 52217 -5-row dough molding machine Ndey Tdxujwydabsgja -Ready for weighing: 35–85g -Voltage: 400V -Power: 2.8kW -Year: 2000 Rsdpfx Abjwydabe Ejcd

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Rcodpfx Asxgi Etob Ejd Steuerung: CC100 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Rcsdpoxg H Hbefx Ab Ejd Typ: VICTORY 80/25 TECH Baujahr: 2004 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Rcsdpeu Eu Tnjfx Ab Ejd Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: excellent (used), SCM contura in excellent condition Rcjdpfx Aet E T I Neb Eod

Condition: used, Year of construction: 2006, functionality: fully functional, The PowerShot allows for large quantities of chocolate to be deposited, with or without pre-mixed ingredients. In addition to its top quality, the PowerShot impresses with its performance in dot, band, or one-shot depositing. The working width is 1300 mm. Key data: • Type: Bühler depositor PowerShot, one-shot/drop depositor • Working width: 1,300 mm • Year of manufacture: 2006 • Bühler commercial number: 064200.010 • Design: complete V4A stainless steel, weight approx. 1,000–1,500 kg • Condition: mechanically complete; currently not connected, without software/control (display missing). With connection and programming, it is likely to be functional according to our assessment. • Control cabinet/machine: untouched – nothing has been removed or modified. We have deliberately removed the covers so that no pests can nest and we can regularly inspect everything. Rodsxdt Dhspfx Ab Eecd • Location: Upper Austria (AT), loading on site possible. No modifications have been made to the control cabinet or the machine; the covers have been removed to prevent pests from entering and to allow us to regularly inspect everything.