Used Insize Granite Surface Plate for sale (18,573)

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: Dwjdpfjycxgmox Aa Hjb - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. - in checked conditions - machinevideo - ?v=XdcxLlr_nWc Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? Djdpfx Aozn Ahdsa Hjwb - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° Dsdpjzycpxofx Aa Hewb back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW Dwedpoxabvqsfx Aa Hjb weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear Dwodpfx Asxyln Rsa Hsb * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 1992, functionality: fully functional, Machine comes from a plant closure Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg Dwjdpfxszimx Ao Aa Hjb dimensions of the machine ca. 4100 x 3200 x 2600 mm Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: good (used), Year of construction: 1990, Year of manufacture: 1990 Control type: CNC Grinding length: 600 mm Grinding width: 200 mm Workpiece height: 375 mm Table load: 100 kg Grinding wheel dimensions: 250x25x51 mm Dedpfx Aaei Hn U Uo Hswb Operating speed: 1-24 m/min Speed: 4200 rpm Drive motor: 5 kW Total power consumption: 7.5 kW Machine weight: approx. 3.2 t Space requirement: approx. 3.7 x 2.1 x 2.1 m

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. Dedpfozuxt Aox Aa Hswb For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), functionality: fully functional, 2x 2.92m2 Plate Heat Exchanger and Miscellaneous Spares (Unused) 1x plate type condensate blowdown cooler, surface 2.9M2 SA-516 GR.70N material 13 barg design pressure -20 / 150 deg c design pressure 12 plates E1958 Tag 1x plate type process steam condensate cooler, surface 2.9M2 SA-516 GR.70N material 14 barg design pressure Dwsdpfx Aaozwx Tnj Hjb -20 / 150 deg c design pressure 12 plates E2901 Tag 2x tightening bar E1958 SL002, E2901 SL002 Part No 10x gasket EPDM E1958 SL001, E2901 SL001 Part No 2x startup & commissioning spares E1958-1, E2901-1 Part No

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Dwsdpfxjzxxgwe Aa Hjb Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dsdpfx Aaey En Dne Hjwb

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Dedpfx Aoizka Ioa Hswb Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Crossfeed 0.1 – 20 mm Cross travel rate 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding wheel spindle speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent lift • Electro-magnetic clamping plate L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 piece grinding wheel with flange • Control panel • Lighting • Coolant system with belt filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 D - 44143 Dortmund - Wambel

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate, pallet changer -Mounting plate: with a carriage with clamping device -Quantity: 1 piece (a second plate is still available ID 21154) -Wagon dimensions: 1450/810/H1120 mm -Weight: 490 kg -Width: 1465 mm -Length: 4930 mm -Working height: 850 mm -Sheet thickness: 35 mm -Plate height: 300 mm -Plate with: supporting ribs -Groove width: 52 mm -Slot spacing: 292 mm -Transport dimensions: 4930/1670/H850 mm -Weight: 5900 kg Dwedpfxod Ehfmj Aa Hsb

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate, pallet changer -Quantity: 1 piece (a second plate is still available ID 21153) -Width: 1465 mm -Length: 4930 mm -Working height: 860 mm -Sheet thickness: 35 mm -Plate height: 315 mm Dwjdpfod Ehflsx Aa Hjb -Plate with: supporting ribs -Groove width: 51 mm -Slot spacing: 292 mm -Transport dimensions: 4930/1640/H860 mm -Weight: 6155 kg

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Condition: Guide slightly worn, now only suitable for rough cutting Features and technical specifications: - Cutting length: 4,300 mm - Max. clearance height: 2200 mm - Max. trimming height: 2100 mm - Max. vertical scoring height: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW Dsdjzk N Hxopfx Aa Hewb - Saw blade speed: 4,500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Specifications and technical data: Cutting height: vertical 2,150 mm, horizontal 2,070 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow roof-tooth Saw blade speed: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Dimension readout for: – horizontal cuts: via scale and strip-cutting stop - vertical cuts: via scale from 0–1,300 mm Extraction connection: 100 mm 5 material support rollers, per metre of cutting length 1 feed roller and 1 discharge roller Pneumatic workpiece clamping device between the support rollers 1 centre support element, per metre of cutting length Torsion-free, free-standing machine frame pneumatically retractable slatted frame Round bar guide, vertical and horizontal Finely adjustable folding stop Fine adjustment for horizontal saw cuts via handwheel Strip-cutting stop Manual programming rail with 5 groove blocks Pneumatic lowering of the saw unit Pneumatic saw head locking mechanism Control panel on the saw unit: start button, stop button Control panel with template holder Electronic digital display for the saw unit Electronic digital display for the folding stop Automatically swivelling saw head Location: Flörsheim Dwsdpfxozk Nwqe Aa Hob Availability: at short notice

Condition: used, Sheet metal trolley, welded steel construction Second-hand Djdpfjzk Nr Iex Aa Howb Single-sided loading platform made of plywood 5° tilt Side rail height: 915 mm Trolley powder-coated in RAL 5010 gentian blue Permanent or surface-protected impact- and scratch-resistant Tyres made of thermoplastic rubber on plastic rims with precision deep-groove ball bearings, grey, non-marking Thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm) 200 x 40 Load capacity (kg) 500 Weight (kg) 47.5 Dimensions (WxDxH, mm) 1500 x 680 x 1200 Availability: at short notice Storage location: Flörsheim

Condition: used, Control Siemens In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dwedpjzzrhtofx Aa Hjb Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Faceplate (28665) Diameter: 305 mm Manufacturer: TG Dwjdpfoxazn Hsx Aa Hjb Height: 90 mm T-slot width: 18 mm Jaw height: 48 mm Center bore diameter: 178 mm Bolt circle diameter for mounting screws: 178 mm For M12 screws Weight: 34 kg

Condition: used, total width: 2,300 mm, total length: 3,500 mm, total height: 3,100 mm, Colour: Green Empty weight: 6.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 2000 - Z-axis travel [mm]: 400 - Table width [mm]: 1600 - Table depth [mm]: 300 - Magnet width [mm]: 600 - Magnet depth [mm]: 200 - Max. grinding wheel diameter [mm]: 355 - Options: Knife Sharpener - Transport dimensions: 3500mm x 2300mm x 3100mm (l x w x h) - Transport weight [kg]: 6000kg Financial information Dwedpfx Aajzwvwde Hob VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2001, overall weight: 8,500 kg, total height: 350 mm, total length: 5,000 mm, total width: 2,500 mm, plate height: 350 mm, plate width: 2,500 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - DTR MACH-ID 9790 Make: STOLLE Type: DTR Dodpfjzw E Hzex Aa Hswb Year: 2001 8 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Floorplate Length: 5000mm Floorplate Width: 2500mm Height: 350mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 36mm Weight a plate approx.: 8500kg Number of matching pieces: 1 Length: 5000mm Width: 2500mm Height: 350mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 8,000 kg, total height: 370 mm, total length: 5,000 mm, total width: 2,250 mm, plate height: 370 mm, plate width: 2,250 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - RDT MACH-ID 9791 Make: STOLLE Type: RDT Year: 1990 12 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Floorplate Length: 5000mm Floorplate Width: 2250mm Height: 370mm No. Of T-slots: 7 Distance from T to T-slot / Jump:320mm Dodpfx Aozw E A Nsa Hswb T -slot size: 41mm Weight a plate approx.: 8000kg Number of matching pieces: 1 Length: 5000mm Width: 2250mm Height: 370mm Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, overall weight: 3,900 kg, total height: 300 mm, total length: 3,520 mm, total width: 2,000 mm, plate height: 300 mm, Floorplate Length: 3520mm Dwsdpozw Ezrjfx Aa Hjb Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 3900kg Number of matching pieces: 1 Length: 3520mm Width: 2000mm Height: 300mm Weight: 3900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000 Djdpszw Eyzjfx Aa Hjwb     Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new,