Used Hyundai R320 Nlc-7A Kettenbagger Oq80 for sale (618)

Condition: new, feed pressure 8 bar Effective free air delivery 235/165 L/min Receiver capacity 50 / 10 l / bar weight of the machine ca. 37,5 kg. Number of cylinders 2 Stk. motor 230V / 1,5KW V / KW range L-W-H 790 x 400 x 730 mm This oil-free and compact Hyundai compressor has a low weight and super-quiet Iedpfou Imp Hex Afueih operation. Very quiet, about 53-60dB !! (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator.

Condition: used, mileage: 65,810 km, power: 127 kW (172.67 HP), first registration: 08/1985, overall weight: 12,200 kg, fuel type: diesel, color: green, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,380 mm, loading space length: 4,300 mm, loading space height: 500 mm, total width: 2,380 mm, total height: 1,900 mm, Equipment: all wheel drive, tail-lift, MB 1017 A as flatbed with crane Atlas AK 1403 D - 3t Good condition, crane is fully functional – all hydraulic lines are intact. The cab and flatbed are free from rust-through. All-wheel drive 4x4 with off-road reduction, center and rear differential lock, 5-speed manual transmission, engine brake. Fixed tow coupling, 3-seater, driver’s cab with roof hatch, leaf suspension front and rear, tires 10 R 22.5 Towing capacity 12,300 kg with continuous braking system Starter batteries new and recently inspected – the truck is ready to start and immediately operational. Ijdpjxfd Adofx Afuoih Flatbed dimensions: 4300 x 2380 x 500 mm (LxWxH) +++ Subject to errors, modifications, and prior sale

Year of construction: 2014, condition: used, working temperature 30 ° cooling capacity 7,4 kW Iedpexb Egcjfx Afuoih fill weight 1,82 kg operating pressure 20/8,6 bar volume capacity 9,44 Kubikmeter/h volume capacity 2900 pro Min. volume capacity 28,5 bar weight of the machine ca. 160 kg dimensions 675 x 835 x 1250 mm Temperature control unit with built-in water tank

Condition: used, mileage: 1 km, first registration: 01/2023, wheelbase: 3,250 mm, color: white, gearing type: mechanical, emission class: euro6, PIAGGIO NP6 LPG, DUAL-WHEEL VERSION, 325 TOP LOADING CAPACITY: 4 PALLETS VAN EXTERNAL LENGTH: 3200 EXTERNAL WIDTH: 1800 INTERNAL HEIGHT: 1700 TUBULAR CHASSIS 18MM MULTI-LAYER FLOOR DUAL REAR DOOR WITH A SINGLE RECESSED HANDLE NEW, AVAILABLE FOR IMMEDIATE DELIVERY, READY FOR REGISTRATION... AT OTHER LOCATIONS OF OUR GROUP, WE ARE AN OFFICIAL MERCEDES-BENZ DEALER. TRUCK, NAPLES BRANCH (NA) DOMENICO ESPOSITO, EBOLI BRANCH (SA) OFFICIAL FORD TRUCK DEALER, DOMENICO TRUCK SRL MARCIANISE BRANCH (CE) NAPLES BRANCH (NA) EBOLI BRANCH (SA) AND OFFICIAL PIAGGIO COMMERCIAL DEALER, DOMENICO ESPOSITO. Ijdohy Syrspfx Afusih WE OFFER A WIDE SELECTION OF USED COMMERCIAL/INDUSTRIAL VEHICLES FROM MULTIPLE BRANDS (FIAT, HYUNDAI, DAF, MERCEDES-BENZ, RENAULT, PEUGEOT, IVECO, MITSUBISHI, SCANIA, MAN, NISSAN, ISUZU, FIXED PLATFORM, CRANE, DUMP TRUCK, CURTAIN-SIDED, BOX, TAIL LIFT, REFRIGERATED VEHICLE, INSULATED WITH REFRIGERATION UNIT, VAN). - POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. TEL. 0- OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM, SATURDAY 8:30 AM/2:00 PM.

Condition: used, mileage: 83,000 km, power: 127 kW (172.67 HP), first registration: 09/1985, fuel type: diesel, overall weight: 12,200 kg, color: green, Equipment: all wheel drive, Used vehicle * Vehicle no.: - * All-wheel drive 4x4 * Flatbed 5.1m x 2.4m x 0.6m * Leaf suspension * 5-speed manual transmission * 3 seats Iisdpfslxllpjx Afuoh * Tires 10 R 22.5 * Reduction gearbox * Differential lock * Excellent condition ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale only to businesses or for export. The above-mentioned data, photos and equipment list serve solely for the general identification of the vehicle and do not constitute a guaranteed characteristic in the legal sense of sales law! All details and equipment information are supplied WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! The equipment list does not form part of the contract and must be checked on-site in detail by every interested party before conclusion of purchase. Later complaints will not be accepted.

Condition: used, mileage: 279,000 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, overall weight: 6,700 kg, first registration: 12/2015, loading space length: 4,900 mm, loading space width: 2,120 mm, color: yellow, brakes: retarder, Year of construction: 2015, Equipment: ABS, air conditioning, crane, IVECO DAILY 70C17 Platform 4,90m / 4x2 Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 20015 ? MILAGE: 279 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION ? HAND-ADJUSTABLE RUNNINGS ? ALUMINUM FLOOR PLATFORM: 490 x 212 cm (L x W) CAPACITY: 3 000 kg TOTAL WEIGHT: 6 700 kg WHEELBASE: 380 cm TIRE SIZE: 225/75R16 SUSPENSION: FRONT: SPRING BACK: AIR Iiodpfxondmmls Afujh TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: good (used), Plummer block housings, bearing blocks for shredders, crushers, water mills, chippers, cutting mills, granulators, and cutting granulators -Quantity: 1 piece heavy-duty steel pillow block housing -Type: Bearing block, inner diameter: 320 mm -Axis/Center of housing: 190 mm -with: shaft seal discs Iiedpfxjdaa Hus Afush -Quantity: 1x bearing block available -Suitable for: Bearing abbreviations 22236/22330/23064/23138/23236, not included in the scope of delivery -Suitable for: Bearing abbreviations 22236K/22330K/23064K/23138K/23236K, not included in the scope of delivery -Dimensions: 560/190/H395 mm -Weight: 228 kg

Condition: used, machine/vehicle number: 7052446 E 80686, Outreach: 250 mm Iiedpsbnygqjfx Afujh Welds steel sheet, approx.: 2.5 + 2.5 mm Wire: 12 + 12 mm Ø Control in 6 steps Welding time can be adjusted continuously Manually operated

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Iiedpfx Aorm Ilfefujh Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: refurbished (used), functionality: fully functional, load capacity: 120 kg, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Iijdpfx Aerqf Tcefuoh Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), functionality: fully functional, load capacity: 210 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: Iodpfx Aorqf Tksfusih - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), functionality: fully functional, load capacity: 16 kg, controller manufacturer: Kuka, controller model: KRC2 / 4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! Ijdpfx Afsrqgb Iousih If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), functionality: fully functional, load capacity: 240 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Iedpfx Aforqgfkjusih Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), functionality: fully functional, load capacity: 150 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: Iisdpfx Aerwnphofujh - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Iisderx Rxtjpfx Afush Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: new, empty load weight: 750 kg, maximum load weight: 2,250 kg, overall weight: 3,000 kg, loading space length: 5,400 mm, loading space width: 2,070 mm, tire size: 195/50r13c, Car transporter or multi-purpose transporter from the manufacturer HULCO, model CARAX-2 3000, 540x207. As standard equipment, the Hulco car trailer features an aluminum floor, lashing eyes on the outside of the frame, retractable ramps under the loading area, a sloping rear, low chassis, a sturdy welded steel frame, a support wheel, and a V-shaped drawbar. We also offer accessories for Hulco car transport trailers, such as a tarpaulin cover, wheel chocks, a rear support set, a drawbar box, car lashing straps, and a lock. --- You can find all our cost-effective offers on our website. Iedpjh Rlvdofx Afusih Germany-wide delivery is possible (except to the islands)! Please ask us for prices. --- PKW-Anhänger-Center Ahrens, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Collection times: Monday - Friday – [Time] Collection is not possible on Saturdays!

Condition: reconditioned (used), Year of construction: 1987, machine/vehicle number: 1277/8-71, functionality: fully functional, Connected load: 380V, 7A Iiedpfsh U Sqrox Afueh Cutting length: 4300 mm Cutting height: 1925 mm Frame height: 2210 mm Machine height: 2500 mm Room height: 2540 mm Edge trimming height: 1870 mm Passage height: 1940 mm

Condition: ready for operation (used), Fanuc A06B-0371-B077 AC servo motor, with A860-0365-T001 serial pulse coder, I64, serial number as shown in the photo, mounting hole spacing: 71 x 71 mm, drive shaft diameter: 10-11 mm (tapered), used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Isdpfx Aei D H Egofuoih

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as shown in the photo, used, display film damaged (see photo 2), otherwise shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Iiodsi D Ukuspfx Afujh

Condition: ready for operation (used), Nestal TAC / TEX 110.240.6185a / TEX 110.240.6187a electronics module, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iiedei Eb Ubepfx Afush

Condition: new, functionality: fully functional, power: 116 kW (157.72 HP), fuel type: diesel, wheelbase: 4,100 mm, color: white, emission class: euro6, number of seats: 7, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, onboard computer, IVECO DAILY 35-160 Double cab, 7 seats Model year 2024 Iiedeud Axmjpfx Afujh BRAND NEW FROM FACTORY READY FOR IMMEDIATE DELIVERY TO BE REGISTERED Engine: 3.0 L, 160 HP Zero kilometers 6-speed manual gearbox Wheelbase: 4100 mm Twin rear wheels Quad-leaf spring suspension Semi-elliptic spring + leaf spring Digital BLUETOOTH (DAB) radio Air conditioning / electric windows Digital comfort instrument cluster Removable spare wheel support USB charging port AT OTHER GROUP LOCATIONS, WE ARE OFFICIAL MERCEDES-BENZ DEALERS D.E. TRUCK S.P.A. NAPLES LOCATION (NA) DOMENICO ESPOSITO S.P.A. EBOLI LOCATION (SA) OFFICIAL DEALER FOR FOTON TRUCK, PIAGGIO COMMERCIAL and MAXUS DOMENICO ESPOSITO S.P.A. EBOLI (SA) and NAPLES (NA) LOCATIONS - POSSIBILITY OF CUSTOM FINANCING OR LEASING OPTIONS ON SITE FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS ZERO DOWN PAYMENT PHONE: -0823 1686306 -335 6713062 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA S-WAY -5500-V8-650-580-730-S500-S 500-S500Stralis-MAN-NISSAN v8-Intarder-770S-Limited Edition-660 S semi-trailer-semi-trailer refrigerated tipper - Lamberet-schmitz ISUZU-FLATBED-CRANE-TIPPER-CURTAIN SIDER-BOX-TAIL LIFT-REFRIGERATED UNIT-INSULATED WITH FRIDGE-VAN)

Condition: ready for operation (used), Fagor MOVCA 725 length scale version 07A 18A SN: 1301019391 with NMVC reading head version: 18A - total length: 82.5cm, used, good condition, 100% functional, scope of delivery as per photos Iodpfx Aot Nbzljfusih

Condition: used, Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder -Manufacturer: Hohner, Encoder rotary encoder -Type: 267AB 25 -Shaft: Ø 10 x 15 mm -Quantity: 1x encoder available -Dimension: 66/58/H60 mm -Weight: 0.3 kg Iiodpfxsq Adqgo Afuoh

Condition: good (used), CNC control, operator panel, logic unit, path control -Manufacturer: Heidenhain, logic unit railway control -Type: LE 407 A 236 484 10 -Individual components: see photos Iisdpfx Ajpz Sf Eofueh -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Condition: used, Stack electrodes, welding electrodes Iiodpfod Iygmjx Afujh -Stable electrode: 4.0 x 350 -Type: FINOX 4337 AC -Weight: 5.1 kg