Used Heating Element 5.0-6.7 Kw for sale (45,287)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Giodpovf E Avefx Ai Nsu Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2021, 2x Atlas Copco Heat Pump Compressor With Spares (Unused 2021) Godpfx Aijzb N Dyj Nsiu Atlas Copco heat pump compressor 1 with coupling Atlas Copco heat pump compressor 2 with coupling Oil system Run down tank With spares as seen in asset list Download asset list below for more details Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. BPDD and EUS forms can be downloaded below.

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Dunli, axial fan -Type: YMF.A4T-630S-7FIIIS01 -Power: 1.4 kW at 1400 rpm -Voltage: 380 volts -Fan wheel: Ø 630 mm / see photos Quantity: 1 piece available -Dimensions: 805/805/H265 mm Giedpfxsylhwgs Ai Nsu -Weight: 36 kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: VEM, electric motor type KR 112, 1/4 Giodpfezbr R Aox Ai Neu -Power: 3 kW -Speed: 1430 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP 44 -Dimensions: 360/248/H255 mm -Weight: 37 kg

Condition: good (used), Year of construction: 1982, Oven, heating oven, heating chamber, heating cabinet, hardening oven, annealing oven -Manufacturer:Artur Nolzen, Chamber dryer oven type KTS 53/30/70 -Temperature: max. 1100 °C -Chamber size: 710 x 535 x 300 mm -Heating output: 25 kW -Automatic temperature control Gijdpozbrx Hefx Ai Nou -Individual components: see photos -Dimensions: 1630/1530/H1700 mm -Weight: 1698 kg

Condition: good (used), Year of construction: 1987, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos -Setup dimensions: 2510/1600/H3760 mm Gijdpfx Aieryalbe Neu -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor -Type: Elmo-G 2BH1 807-1AC17 -Drive: 5.50 kW Gijdsyh Hiwopfx Ai Nou -Speed: 2920 rpm -Dimensions: 680/500/H520 mm -Weight: 122 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, worm geared motor Godpfxszbqqns Ai Neiu -Manufacturer: Motovario worm gear type NMRV/030 -Speed: 17 rpm i 080.0 -Engine: Neri Motori type T5034 -Power: 0.06 kW -Hollow shaft: Ø 14 x 63 mm -Protection rating: IP55 -Dimensions: 235/100/H130 mm -Weight: 3.5 kg

Condition: new, GEA WTT GBS 700M-U-86 Plate Heat Exchanger New, unused plate heat exchanger from stock. Suitable for industrial refrigeration, heat transfer, and process applications. Manufacturer: GEA WTT GmbH Type: GBS 700M-U-86 Part Number: 12509184 Serial Number: 10-120106888-0001 Design: Brazed plate heat exchanger Gedpfx Aiszb Nvis Nsiu Number of plates: 86 Version: G1, G2, G3, G4 Temperature range: -200 °C to +200 °C Max. operating pressure side 1: 30 bar Max. operating pressure side 2: 30 bar Volume side 1: 9.66 l Volume side 2: 9.89 l Volume side 3: 0.00 l Refrigerant: All refrigerants except ammonia Country of manufacture: Germany Condition: NOS (New Old Stock) Location: Kusel

Condition: good (used), Three-phase motor, electric motor -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Voltage: see nameplate Gedpfxjd Tgape Ai Nsiu -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Design: B3 -Dimensions: 360/270/H205 mm -Weight: 30 kg

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece Gisdpfxozbk Tio Ai Nou -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW Giodpjzbk Iyjfx Ai Neu -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: RGM-Ruhrgetriebe, geared motor, angle geared motor Gsdpfezbignsx Ai Nsiu -Speed: 55 rpm -Type: GC 57/30-SN5 -Voltage: 180/200V 3000rpm -Transmission: Z9 5FRG i= 55 -Shaft: Ø 12 x 30 mm -Quantity: 1x geared motor available -Dimensions: 285/190/H120 mm -Weight: 4.9 kg

Condition: good (used), Three-phase motor, electric motor -Manufacturer: Siemens-Schuckertwerke, electric motor type OR624-4 -Power: 3.0 kW -Speed: 1425 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: P33 Gjdpfjzbif Rex Ai Neiu -Dimensions: 370/290/H250 mm -Weight: 40 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Godpjzbhdlofx Ai Neiu -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 150 bar -Flow rate: 42 l/min -Motor: Lammers 4.0 kW / 1440 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 630/520/H960 mm -Weight: 206 kg

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Giodpfxji Dfids Ai Nou Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, With proven CDF surface ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Gijdpfxjxyl Ecs Ai Neu Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Godpfsbunq Hsx Ai Neiu Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Gisdpfx Ajdvltysi Neu Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Godpfedwh E Asx Ai Noiu Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: good (used), Gear motor, electric motor -Speed: 114 rpm Gedpfx Ajdff I Iji Nsiu -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 430/230/H185 mm -Weight: 18.7 kg

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm Gjdpjypcryefx Ai Neiu -Weight: 288 kg

Condition: used, power: 0.55 kW (0.75 HP), rotational speed (min.): 178 rpm, rotational speed (max.): 2,900 rpm, input voltage: 380 V, input frequency: 60 Hz, Robust SEW geared motor for industrial applications. High smooth running and strong performance with 0.55 kW – ideally suited for mechanical engineering or conveyor systems. SEW-EURODRIVE WF30 DT80K4/TF/ACM/AT Gear type: Bevel gear unit WF30 Power: 0.55 kW Voltage: 380–500 V / 50–60 Hz Current consumption: 1.90 A Speed: 2900–178 rpm Torque: approx. 3.75 Nm at 1400 rpm Giodpfx Asw Hgilji Nju Design: IM M1B Protection class: IP54 Insulation class: F Lubricant: SEW PG 400 S/NH-CL – 0.24 L Dimensions: Ma 28/33 Weight: 14.2 kg Duty type: S1 – continuous operation Power factor: cos φ 0.99 Mounting type: foot-mounted Origin: Germany Price refers to one motor. Approx. 52 units available in total. Partial quantities possible. Shipping & collection possible.

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Frame size 200L Motor speed 2955 rpm Godpfx Aijyhq Awo Nsiu Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Excellent condition – new, unused from stock clearance

Condition: excellent (used), functionality: fully functional, Silverson 150l Inline Lab Mixer With Brook Hansen 0.75kW Motor Complete on trolly for easy transportation. Gijdpfx Asym Al Isi Neu Removed from "blue chip" pharma company in Cork. IE