Used Foster Epsg500H R134A for sale (168)

Year of construction: 2009, condition: new, Carrier chiller 19XR7070LF475 ,YEAR 2009, 290h run hours , Duedpfxeb Tulwj Afkeu 3100KW/1000ton cooling capacity, turbo compressor, Siemens Softstarter, R134a, high Efficient , 400V 50Hz, commissioning and service available.

Condition: used, BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ss, good condition. Duedpfeb Itipsx Afksu

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Duodpfxexyhdbs Afkju Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Condition: excellent (used), Year of construction: 2014, operating hours: 4,293 h, MANUFACTURER ATLAS COPCO Dsdpfsylwlmjx Afkouu MODEL GA30FF S/N API325798 YEAR 2014 POWER (kW) 30 OUTPUT (m3/min) 5.4 PRESSURE (bar) 7.25 HOURS (DOC/TOTAL) 4293 FREQUENCY INVERTER no INTEGRATED DRYER yes, R134a 0.54kg HEAT EXCHANGER no COOLING (AIR/WATER) air ON RECEIVER TANK no

Condition: excellent (used), Year of construction: 2015, MANUFACTURER: DRYTEC MODEL: SD1800 SERIAL NO.: 3414MA12150 YEAR: 2015 POWER (kW): 3.14 CAPACITY (m3/min): 30 PRESSURE (bar): 16 OPERATING HOURS (DOC/TOTAL): Dujdpfxsykvmtj Afkju FREQUENCY INVERTER: BUILT-IN DRYER: R134a, 7kg

Condition: excellent (used), Year of construction: 2018, MANUFACTURER: ATLASCOPCO TYPE: GA11VSDFF PLUS S/N: API265155 YEAR: 2018 Dodpfeyh Rxpex Afksuu POWER (kW): 11 OUTPUT (m³/min): 1.95 PRESSURE (bar): 12.75 OPERATING HOURS (DOC/TOTAL): FREQUENCY CONVERTER: yes BUILT-IN DRYER: yes, R134a 0.39kg

Condition: like new (used), Technical Specifications Brand: TRANE Model: RTAD 100 Cooling Capacity kW/h: 336 kW/h Cooling Capacity Kcal/h: 288,960 Kcal/h Evaporator: Shell & Tube Condenser: Aluminum Fin & Copper Tube Air-Cooled Condenser Compressor: Trane Helical Rotary Screw Compressor Model: 2 x CHHP0L2TKJ0N069A Control Panel: Trane Adaptive Control Refrigerant: R134a Refrigerant Charge: 30 + 32 kg Number of Refrigeration Circuits: 2 Dujdpezadhdefx Afkju Number of Condenser Fans: 6 Power Supply: 400V / 3Ph / 50Hz Dimensions (mm): 4426 x 2260 x 2068 Weight (Kg): 2940

Condition: reconditioned (used), Title:RHOSS TCHVBZ 2630 – 621 kW Water-Cooled Chiller | Bitzer Screw | Refurbished Headline: Industrial-grade Rhoss water-cooled chiller, fully refurbished and field-tested. Equipped with 2× Bitzer screw compressors, Carel Smart Controller, and energy-efficient R-134a refrigerant — engineered for demanding industrial cooling applications. TECHNICAL SPECIFICATIONS Specification Value Brand / Model RHOSS TCHVBZ 2630 Type Water-Cooled Chiller Condition Refurbished / Tested Cooling Capacity 621.6 kW (534,500 Kcal/h) Refrigerant R-134a Compressors 2 × Bitzer Screw CSH8581-125Y-40P Evaporator Shell & Tube – DN150 Connection Condenser Shell & Tube – DN125 Connection Control System Carel Smart Controller Dimensions (mm) 4070 × 1300 × 1960 Weight 3,297 kg Location Seyhan / Adana, Türkiye Dsdpey Umf Nsfx Afkouu TECHNICAL OVERVIEW Industrial-grade Rhoss water-cooled chiller — fully refurbished, field-tested, and verified to meet international performance standards. Equipped with high-efficiency Bitzer screw compressors and a Carel Smart Controller for stable, energy-efficient, and long-term operation. Optimized for demanding industrial applications where reliability and uptime are critical. WHY CHOOSE THIS UNIT Fully refurbished and performance-tested Equipped with high-efficiency Bitzer screw compressors Reliable and durable for continuous industrial operation Energy-efficient R-134a refrigerant Backed by professional after-sales service and spare parts inventory Fast commissioning and on-site technical consultation available ABOUT ÖZSAYIN COOLING SYSTEMS With more than 40 years of experience in industrial refrigeration, Özsayın Cooling Systems provides complete turnkey solutions: Supply of new or refurbished chillers (10 – 2,500 kW) Short- and long-term rental options On-site installation, commissioning, and maintenance Extensive spare parts inventory for global brands (Carrier, Trane, Daikin, York, Bitzer, Rhoss, Climaveneta, McQuay, etc.) 24/7 technical service and engineering consultancy RENTAL OPTION AVAILABLE This unit is available for short- or long-term rental under flexible terms. Contact us for a customized quotation and technical consultation tailored to your project requirements. CONTACT Mr. Samet Özsayın – Özsayın HVAC Technologies Seyhan / Adana, Türkiye Last Updated: 26.08.2025 HASHTAGS / KEYWORDS #ozsayin #bitzer #rhoss #watercooledchiller #industrialchiller #r134a #coolingsolutions #hvacturkey #chillerrental #refurbishedchiller #screwcompressor #carelcontroller

Condition: excellent (used), operating hours: 151 h, functionality: fully functional, overall weight: 2,080 kg, empty load weight: 2,080 kg, color: grey-black, loading space length: 4,015 mm, loading space width: 2,060 mm, loading space height: 1,960 mm, container length: 13.9 ft, Equipment: cooling unit, Bundeswehr Military Container Year of manufacture: 2007 External dimensions: Length 423 cm / Width 218 cm / Height 205 cm. Internal dimensions: 411 / 210 / 196 cm I HAVE 2 UNITS FOR SALE. The container is equipped with an air filtration system, heating, and air conditioning (R134A refrigerant). The equipment is practically new; inside there was an installation with a diving compressor for pressurizing helium for military use. Dsdjw S Dkpepfx Afkouu The container is equipped with an oxygen content sensor and a complete electrical installation. This unit features all amenities, making it suitable for use as a bunker or shelter insert in case of wartime threat. When placed underground, this container can ensure survival even during a total apocalypse. The container is in excellent technical condition; the entire ventilation system has been powered for only 131 hours, and the air conditioning has operated for approximately 15 hours.

Condition: used, functionality: fully functional, Haskris R100 Chiller. R100 has the following advantages: -reliability -efficiency -accuracy and informativeness -easiness in operation Eletrical 208/23V 1P 60 Hz Refrig R134A Refrig Charge 3 lb Min.Circuit Ampacity 12,5 Max. Overcurrient Prot 15 Pump Motor 1/3 HP Compressor RLA 7 Fun 0,7 Djdpsuax Icsfx Afkeuu Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 270L Vertical Air Receiver + IZBERG N10S Air Dryer This complete set includes the LUFT 1000 INVERTER screw compressor, a 270-liter vertical air receiver with full compressed air accessories, and the IZBERG N10S refrigerated air dryer. Designed for professional use, this system is ideal for industrial plants, workshops, and pneumatic installations that demand high performance, energy efficiency, and reliability. The LUFT series screw compressors by the Polish brand CORMAK incorporate the latest advancements in pneumatic technology, paired with high-quality components and materials. Low operating costs, user-friendly operation, robust construction, and high output ensure efficient and hassle-free performance. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g CORMAK 270L Vertical Air Receiver – Key Features: This 270-liter vertical air tank with an operating pressure of 11 bar is a reliable solution for storing compressed air in industrial environments. It acts as both a buffer tank and a stabilizer for compressor operation. Professional Pressure Vessel Construction – Made from high-grade, 4 mm thick steel, resistant to both pressure and corrosion. UDT Certification & CE Marking – Compliant with EU safety and quality directives. Operating Pressure of 11 bar – Suitable for most pneumatic systems, including those with higher pressure requirements. High Storage Capacity (270 L) – Ensures steady air supply and reduces compressor cycling frequency. Multi-connection Ports – Equipped with five outlets in 1¼", 2", and ½" sizes for versatile system integration. Durable Finish – Internal and external anti-corrosive coating ensures long service life. Space-Saving Vertical Design – Ideal for facilities where floor space is limited. Ideal for: Manufacturing facilities Automotive and industrial workshops Pneumatic tool and machine operation Dusdpfxjxazlro Afkeu Compressed air systems requiring stable pressure and high efficiency This comprehensive compressed air solution offers excellent energy efficiency, stable pressure control, and long-term reliability, making it a perfect fit for demanding industrial applications.

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 500L Vertical Air Receiver + IZBERG N10S Air Dryer This professional compressed air set includes: The LUFT 1000 INVERTER screw compressor (7.5 kW, direct drive, with frequency inverter), A 500-liter vertical air receiver with fittings, The IZBERG N10S refrigerated air dryer. This system is designed for industrial facilities, workshops, and all pneumatic applications that require reliable, efficient, and energy-saving compressed air solutions. The LUFT series by the Polish brand CORMAK represents the latest in pneumatic technology, combining innovation with high-quality materials and components. Low operating costs, user-friendly design, robust construction, and high performance ensure efficient and trouble-free operation even in demanding conditions. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g 500L Vertical Air Receiver – Technical Specifications: Parameter Value Tank Capacity 500 liters Operating Pressure 11 bar Wall Thickness 4 mm Dusdpfsxa Ah Uox Afkeu Diameter Ø 600 mm Height 2098 mm Weight 145 kg Number of Connections 6 Connection Sizes 1¼", 2", ½" Dimensions (H x D) 209.8 x 60 cm

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger Dodpfxjmt Dbhe Afkeuu In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. Dodpomt Dcfsfx Afkouu The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Year of construction: 2016, condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Dujdpjhgr Ihsfx Afksu Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Dsdpfxohgfnbe Afkeuu Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Djdpfxohg Rcxj Afksuu Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Dujdpshgg Rrofx Afkeu Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana