Used Esta Esta Filtower F-160 W3 Filtration Tower for sale (39,416)

Condition: used, functionality: fully functional, mileage: 80,622 km, power: 115 kW (156.36 HP), first registration: 10/2006, fuel type: diesel, empty load weight: 4,600 kg, overall weight: 6,500 kg, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: parabolic leaf (spring), Year of construction: 2006, Equipment: ABS, additional headlights, air conditioning, Firefighting vehicle decontamination: Renault Mascott 160 DXi Registered: October 24, 2006 80,622 km (odometer change at 75,000 km) Double cab, 4-seater + storage rack Curb weight: 4,660 kg; Gross vehicle weight: 6,500 kg Tow bar with tow bar 3,500 kg Overall dimensions: 745 cm x 215 cm x 310 cm (L x W x H) Box dimensions: 415 cm x 215 cm Interior box height 205 cm Wheelbase 460 cm Twin tires Aluminum box body Integrated ladder on the side Fully walk-in box Ncjdpfx Aaewh Nx Ssaor Hand crane on the "roof terrace" Air conditioning External power socket 220 V sockets Electrical front door / electric mirrors Rear warning system Area lighting Rear tail lift (500 kg) Foldable protective walls at the rear Refrigerator 4-cylinder diesel engine, 2953 cc; 115 kW First-hand vehicle Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 1,122 h, load capacity: 16,000 kg, lifting height: 2,410 mm, free lift: 140 mm, fuel type: diesel, mast type: triplex, construction height: 3,130 mm, fork carriage width: 2,500 mm, fork length: 2,440 mm, empty load weight: 25,500 kg, total length: 6,840 mm, drive type: Diesel, construction width: 2,535 mm, Heavy-duty forklift - Diesel Load centre: 1200 Fork width: 250 mm Fork thickness: 105 mm ISO class: Terminal West Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyre type: pneumatic Front tyre size: 12.00 - 24 Front tyre condition: 80 - 100% Rear tyre type: pneumatic Nsdpfxexx E H Dj Aaaocr Rear tyre size: 12.00 - 20 Rear tyre condition: 80 - 100% Sideshift, fork positioner, (Open range outside edge to outside edge = 925 mm to 2,260 mm) (Open range inside edge to inside edge = 430 mm to 1,760 mm)

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground Nedpfoh Alh Rsx Aaaocr - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Year of construction: 2009, condition: good (used), Section of tubular ultrafiltration able to treat about 36 mc/g of product Nsdetv Dx Espfx Aaaocr

Condition: good (used), Year of construction: 2009, Section of Double-Stage Reverse Osmosis able to treat about 60 mc/g of product Ncedpfotv Drlox Aaaer

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,049 h, load capacity: 16,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: electric, mast type: duplex, construction height: 3,695 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Duplex Condition: Refurbished with warranty Njdpfextg E Rex Aaajcr Technical condition: very good Front tires type: Pneumatic Front tire size: 12.00 x 20 Front tire condition: New Rear tires type: Pneumatic Rear tire size: 12.00 x 20 Rear tire condition: New Battery voltage: 120V Battery capacity: 1204Ah Battery year: 2020 Description: TOP CONDITION!!! PERFECT CONDITION!!! Sideshift, fork positioner, Air-suspended driver's seat, rear-view camera 3rd valve, 4th valve, rear working lights, front working lights, heater, road approval (StVZO), full cab, CE certificate, twin tires, safety light, interior mirror, exterior mirrors, wipers, LED,

Condition: not inspected (used), throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm Nedpfxjuhn Uhj Aaaocr The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, throat depth: 500 mm, Manufacturer: Fase Ncsdpfxouhn Tko Aaasr Full: 116 kVA Version: 500mm The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: good (used), Year of construction: 2010, The Poly-Clip FCA 160 double clipper is a professional machine for closing artificial and natural casings in the meat and food industry. Manufactured by the renowned manufacturer Poly-Clip System GmbH & Co. KG, it is characterized by reliability, solid construction, and high performance. The machine is designed for continuous operation in production facilities, ensuring fast and precise closure of calibers while maintaining the highest standards of hygiene. Technical specifications: Manufacturer: Poly-Clip System GmbH & Co. KG Model: FCA 160 Power: 4.0 kW Power supply: 3x400V, 50/60Hz Current consumption: 6.0A Ncedpfew Swqisx Aaajr Operating pressure: 5–7 bar Weight: 625 kg Machine dimensions: 150 × 120 × 190 cm Clip counter: 46841 Manufactured in: Germany Additional equipment: Work table Set of spare parts Advantages of the Poly-Clip FCA 160 clipping machine: Solid and reliable design. Precise and fast closing of casings. Easy to use and highly ergonomic. Suitable for intensive use in industrial conditions. The set includes additional equipment for immediate implementation in production. The Poly-Clip FCA 160 clipping machine is a proven solution for meat and food processing plants where quality, efficiency, and durability are important.

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 2067, Working width max. (mm): 800 Ncedpfx Aspvi U Reaaer

Condition: used, Year of construction: 2006, machine/vehicle number: MKF4810-cp, functionality: fully functional, power: 80 kW (108.77 HP), volume flow: 64,000 m³/h, intake manifold diameter: 150 mm, filter area: 480 m², total height: 4,000 mm, total length: 14,850 mm, total width: 2,670 mm, Equipment: CE marking, We offer this used Modesta stationary extraction system, year of manufacture 2006. Specification: • Used high-efficiency negative pressure extraction system, brand Modesta • Capacity approx. 64,000 m³/h • 480m² filter surface • Filter bag diameter 150mm; wide spacing between bags for material load • Expansion chambers for optimal pre-separation and low material load on filter bags • 16x 4.0 kW fans 2700-2200 Pa; total power 80kW • Chain conveyor • Compressed air cleaning • Dry-type fire extinguishing line connection • Dimensions: (LxWxH 14.85 x 2.67 x 4.00m) • Including control cabinet Ncodpjyywhxofx Aaaer • Year of manufacture 2006 • CE / ATEX / NEN compliant EUR 10,000 ==

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Ncodpfx Aoh Ek Daoaajr The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Ncsdemhhf Sjpfx Aaasr

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth Njdpfx Aaemhh Dtoascr 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with sliding carriage, maximum travel 500 mm -Depth adjustment: 0 - 6 mm -Drive: 0.5 kW -Adjustable speed: 1200 - 8000 rpm -Angle: 45° -Accessories: Widia milling head, diamond grinding wheel, vacuum cleaner Ncjdpfeyn N Ilox Aaasr -Dimensions: 490/870/H1150 mm -Weight: 106 kg

Condition: excellent (used), For sale: Sterling Fluid Systems ZTIC 040160 industrial pump with Siemens 3kW motor. A robust, professional unit designed for use in industrial installations, water circuits, and technological systems. ⚙️ Technical specifications: - Pump manufacturer: Sterling Fluid Systems - Model: ZTIC 040160 - Type: AA ODC B2 KX - Motor: Siemens IE1 - Power: 3.0 kW - Voltage: 230/400V (3~) - Frequency: 50 Hz - Speed: approx. 2835 rpm - Protection class: IP55 - Insulation class: F - Connection: flanged 🛠️ Features: - Centrifugal pump for water and industrial liquids - Heavy-duty industrial construction - Reliable Siemens motor - Flanged version – easy installation in piping systems - Designed for continuous operation 📦 Condition: ✔️ Used ✔️ Very good technical condition ✔️ Freshly painted ✔️ Normal signs of use visible 📌 Applications: - Industrial systems - Heating and cooling systems - Water circulation Nodpfx Asyz Dxmoaascr - Manufacturing plants - Agriculture 📦 Set includes: - Pump with Siemens motor - As shown in the photos 🚚 Shipping: - Shipping by courier or pallet possible - Personal collection also available - Assistance with transport arrangements is offered

Condition: new, For sale: high-quality industrial Siemens SIMOTICS motor. Condition: new, unused, original packaging (warehouse stock, may show slight marks from storage). 🔧 Technical data: Manufacturer: Siemens Model: 1FE1093-6WU11-1BN2-Z Serial number: YFJ86378498 001 Type: 3-phase motor (servo / torque motor) Voltage: 425 V Current: 43.0 A / 60.0 A Ncsdjyx I Slepfx Aaaor Power: 16.8 kW / 21.5 kW Rated speed: 1600 rpm Max speed: 7000 rpm Max torque: 165 Nm Rated torque: 86 Nm Protection class: IP00 Insulation class: 155 (F) Duty type: S1 Cooling: water-cooled (8 l/min, max 25°C) Standard: EN 60034 Temperature sensor: KTY84-130 📏 Construction: direct drive (torque motor) high-precision manufacturing intended for industrial applications without gearbox 💡 Applications: CNC machines drive axes industrial automation production lines 📦 Included: Siemens motor original packaging

Year of construction: 2003, condition: used, Standard accessories Nodpfx Asci Tnweaajcr

Condition: used, turning diameter over bed 360 mm turning diameter over slide rest . mm turning length 750 mm 3-jaw chuck Durchmesser 160 mm tail stock Multifix turning speeds max. 2500 U/min quick change tool holder System Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Nsdpfjyqv A Ijx Aaaecr Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Technical specifications for the pallet rack stand: Shelving system: Arestant Type: AS Included in delivery: Nedpfx Aaewa Tcroaocr 1x pallet rack stand, used Material color: blue Profile dimensions: 80 x 77 x 1.8 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (screwed framework) Height: 4,500 mm Depth: 1,100 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Ncjdpfx Aaok Uyrioaor Material color: light blue total length: approx. 1.600 mm profile dim.: U 50 x 28 mm number of holes: 2 pcs. hole Ø: approx. 11 mm Weight / pc.: approx. 1,800 kg General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the locking pin: System: Arestant Type: AS Ncjdpfx Aow Hbhpsaaer Scope of delivery: 10x locking pins, used Material color: fully galvanized Weight: 0.018 kg/unit For securing longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipping beyond this is subject to additional costs, which can be individually requested from us depending on the delivery location or scope of delivery.

Condition: good (used), Included in the delivery: 01x Base plate, new Ncjdpfjxgp E Tsx Aaasr Manufacturer: Arestant NS Type designation: STD Base Plate BP80 Material finish: Sendzimir galvanized For frame profile width: 80 mm Material thickness: 6.00 mm Total width: 118 mm Total depth: 150 mm Height: 45 mm Number of mounting holes: 03 pcs. Hole diameter: 13 mm Weight per unit: 0.83 kg / pc. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be requested from us depending on the delivery location and scope of supply.

Condition: excellent (used), • Model: WIDAX WULMIX-HE LINE M68 Ø160 R16 • Mounting: SK40 DV40A SE40 050 tool holder • Diameter: Ø160 mm • Number of insert pockets: large – full set • Insert type: 058 (reusable, replaceable) • Condition: very good, teeth and body without damage, ready for use • Precisely balanced steel body • Manufacturer: WIDAX – Made in Germany • Ideal for CNC milling machines and machining centers with SK40 spindle Ncedpfx Aexmu A Doaasr

Condition: good (used), functionality: fully functional, roll diameter: 48 mm, roll width: 48 mm, roll pitch: 85 mm, total width: 600 mm, total height: 620 mm, total length: 4,750 mm, conveying length: 4,750 mm, construction width: 600 mm, construction height: 620 mm, empty load weight: 80 kg, TAF item number: 1000005688 Manufacturer: Nestaflex Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,400 x 600 x 620 Width incl. drive: 600 Conveyor length in mm: from: 1,400 to: 4,750 Conveyor width in mm: 500 Conveyor height in mm: from: 620 to: 950 Load capacity between 2 feet: Number of feet: 4 Roller type: steel Rollers per axle: 5 Roller spacing in mm: 85 Nedpfx Aox Dmx Ejaaocr Roller diameter in mm: 48 Net weight: 80 kg Condition: used / fully functional Function test: OK