Used Dust Cyclone, Dust Separator for sale (10,823)

Condition: used, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer:Si Smiths Industries, hydraulic pump hydraulic unit -Type: 102680-13-24 -Voltage: 24 V Bjdeul H Ebepfx Ac Tsdg -Pressure: 160 Bar -Dimensions: 160/130/H330mm -Weight: 10.1 kg

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Bdsdpjua Tbwefx Ac Tjg Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: reconditioned (used), Fully refurbished and tested. Very good condition. Bedpfx Ajuccrkoc Tsdg Complete with tools for bowl cyclone foundation plate vibration damping feet owm - operating water module controlcabinette (not tested or reconditioned)

Condition: new, Year of construction: 2025, DCV6000E Industrial Dust Collector The DCV6000E is an advanced industrial dust collector designed for the efficient extraction of wood chips, shavings, and dust from multiple workstations simultaneously. Engineered for continuous, heavy-duty operation in manufacturing environments, it delivers consistent suction performance and maintains excellent air quality throughout the production facility. Its reinforced construction and dynamically balanced impeller ensure quiet, reliable, and low-maintenance operation. Key Features Exceptional extraction capacity of 6,000 m³/h, ideal for operating multiple machines simultaneously Ø250 mm inlet port providing high airflow capacity and compatibility with centralized dust extraction systems 28 polyester filter cartridges with 5-micron filtration and a total filtration area of 14 m² Bjdpfx Acouc U Nbj Tedg Ceiling-mounted design for space-saving installation and easy system expansion Sealed waste bag replacement system for clean and convenient maintenance Energy-efficient operation thanks to an optimized fan blade design and a highly airtight extraction system Construction and Technology The DCV6000E is built with a heavy-duty hardened steel housing designed to withstand deformation and minimize vibration. At the core of the system is a dynamically balanced metal impeller, reducing noise while ensuring stable operation under high airflow conditions. The large-surface polyester filter cartridges effectively capture dust particles as small as 5 microns. An optional HEPA filtration system is available for applications requiring the highest air quality standards. Performance and Efficiency Powered by a 3.8 kW (S1) motor operating at 3,000 rpm, the DCV6000E achieves an air intake velocity of 28–32 m/s. This enables efficient dust extraction for multi-machine woodworking lines and automated production systems, regardless of workload intensity. The unit is designed for continuous-duty operation, maintaining stable performance throughout extended production cycles. Applications The DCV6000E is ideally suited for furniture manufacturing plants, industrial woodworking facilities, CNC production lines, and other environments where large volumes of wood dust are generated. The unit is compatible with: Sliding table saws and panel saws Wide belt sanders Edge banders and planers CNC woodworking machines Standard Equipment 28 polyester filter cartridges (5-micron filtration) Galvanized steel housing Metal impeller and extraction chamber Sealed waste collection bags Optional Equipment HEPA filter Extraction hoses and system manifolds Waste container fill level sensors Technical Specifications Specification Value Motor Power (S1) 3.8 kW / 400 V, 50 Hz Motor Speed 3,000 rpm Airflow Capacity 6,000 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø250 mm Air Intake Velocity 28–32 m/s Total Filtration Area 14 m² Number of Filters 28 Filter Material Polyester, 5 microns, Filter Class "G" Overall Dimensions (L × W × H) 2000 × 625 × 2150 mm Weight 262 kg

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Bdsdsuc U N Uspfx Ac Teg Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Optional Equipment HEPA filters Ceiling-mounted extraction system Additional suction pipes and connectors Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: new, Year of construction: 2026, SCV11300TC VIBER BIG-BAG – Advanced Industrial Dust Extraction System with Dual BIG-BAG Waste Collection The SCV11300TC VIBER BIG-BAG is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. The unit stands out with its use of two high-capacity BIG-BAG collection bags, significantly improving waste management efficiency. Equipped with advanced filtration and protection systems, it provides effective extraction of sawdust, dust, and chips even during long-term continuous operation. Main Advantages of the Machine Two BIG-BAG collection bags – a unique market solution that increases waste storage capacity. VIBER system – automatic filter cleaning ensures constant extraction performance. TC housing – fully enclosed, sound-insulated construction reducing noise and vibrations. DAMAGE PROTECT system – mechanical protection preventing rotor damage caused by larger particles. REHEAT system – heat recovery from exhaust air, improving the energy efficiency of the facility. Design and Technology The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced rotor, ensuring stable, reliable operation and high extraction performance of 11,300 m³/h. The housing has been designed for effective acoustic insulation and maximum suction system tightness, resulting in cleaner and warmer air in the workplace. Precision and Work Efficiency Bdjdpfx Asudav Nsc Tsg Thanks to 64 polyester filters with filtration efficiency down to 5 microns, and the possibility of installing an additional HEPA filter, the unit provides safe and highly effective air purification. The high suction speed (28–32 m/s) enables efficient removal of chips and sawdust from multiple workstations simultaneously. Applications The SCV11300TC VIBER BIG-BAG is an ideal solution for: woodworking plants, furniture factories, operators of panel saws, edge banders, and sanding machines, industrial installations requiring a central dust extraction system. Standard Equipment VIBER system – automatic filter cleaning Two BIG-BAG collection bags Control cabinet with operator panel TC housing with acoustic insulation DAMAGE PROTECT protection system Optional Equipment HEPA filter for extremely fine particles BIG-BAG filling level sensors Automatic fan reverse system Technical Specifications Parameter Value Power supply voltage 400 V Motor power 11 kW Motor speed 3000 rpm Filter type Polyester, 5 microns / filter category "G" Filter dimensions Ø160 × 960 mm Number of filters 64 pcs Filtration area 30 m² Inlet diameter 350 mm Outlet diameter 500 mm Extraction capacity 11,300 m³/h Negative pressure 3000 Pa Air velocity 40 m/s Noise level 80 dB Number of BIG-BAGs 2 pcs BIG-BAG capacity 1250 L each / 2500 L total Dimensions (L × W × H) 3250 × 1100 × 3700 mm Weight 820 kg

Condition: used, functionality: fully functional, The separator is for sale from the company trio-technik ; Filling via funnel with a plexiglass cover L: 900mm W: 700 mm H: 700-1200mm Inclination max. 20 degrees Speed const. Bsdpfx Asuhzvlec Todg Discs can be adjusted

Condition: ready for operation (used), Separator mounted on a stainless steel frame, with feed pump, discharge pump, sludge pump, circulation tank, stainless steel pipes and valve, wired with control box. For the purification of contaminated water. Large water phase, small light phase and dirt phase. No emptying machine !!! Must be opened for cleaning. Time: approx. 5 min. Ready for immediate use. Bdodjqzxzgopfx Ac Tog We are happy to answer further questions by e-mail!

Year of construction: 2026, condition: new, We also offer leasing and financing options. Feel free to contact us! Bjdpfxeqvmpfo Ac Tjdg For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Bedpfx Acen Nw Nts Tedg Filter unit Inverter Lime dispenser Noise suppressor

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Bedpfx Aepcf Etoc Tjdg Total weight: 6480 kg Adjusting the device belt and tension

Condition: new, Year of construction: 2025, Suction nozzle diameter: 350mm maximum volume flow: 8000 m³/h nominal volume flow: 6927 m³/h negative pressure: 2600 Pa at 21,4 m/s in dusty condition Volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 72 db Chaff bag volume: 640 l Filter cleaning: mororic Engine power: 11 kW Extinguishing device: yes Machine length: 4165 mm Machine width: 1270 mm Machine height: 2595 mm Bedjpfat Tepfx Ac Todg Weight: 900 kg

Year of construction: 2016, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2016. The Miltenyi Biotec CliniMacs Plus Instrument P/N 44085 is a cell separation system designed for clinical-scale enrichment of target cells or depletion of unwanted cells from blood products. It automates cell separation in a sterile system, enabling the separation of target cells from unwanted cells and collecting the fractions in different bags. The system is widely applicable in regenerative medicine, adoptive immunotherapy, and graft engineering. It magnetically labels cells in the Cell Preparation Bag and separates them, providing high purity and excellent yield. With optimized protocols, the system combines reproducibility with ease of use. Specifications: Dimensions: 70cm x 60cm x 90cm (w x d x h) Weight: Approximately 35 kg Input Voltage: 100-240 V~ Power Consumption: 350 W Monitor: 10.1 TFT Touchscreen Types of Starting Material: Leukapheresis, bone marrow Processing Steps: Cell depletion and enrichment via magnetic cell separation Good working condition. Please check out our other listings as well. Bjdpfx Acjt E Hl Is Tedg

Condition: used, Mobile Dust Extraction Fritz Moeller Bedpfxoddxl Es Ac Tjdg

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump -Force/Torque: 19.3 Nm/bar -Speed: from 5 to 500 rpm -Max. pressure: 315 bar -Swallowing volume: 1265 cm³/rev -Dimensions: 500/500/H550 mm Bjdsb A Hrdopfx Ac Tsdg -Weight: 246 kg

Condition: new, Year of construction: 2026, To separate and sort after the specific weight from light and heavy fraction. Bdodpebbr Iiofx Ac Teg Useable for grain, nuts, etc. see PDF. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Technical data: Power consumption 1x15 kW option 2nd 15kw Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Bsdpfsvz Az Iex Ac Tsdg Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: new, Year of construction: 2026, The magnetic separator is an industrial device designed for continuous purification of coolants and oil-based fluids from ferromagnetic particles generated during machining processes. In closed-loop systems, it effectively removes metal chips and fine particles from the working medium, stabilizing cooling and lubrication parameters while reducing wear on pumps and installation components. Magnetic coolant separator – key benefits in maintaining clean machining fluids In production environments, coolant operating in a closed circulation system is constantly exposed to metallic contamination. Ferromagnetic particles act as an abrasive material – accelerating pump wear, causing deposits in channels and nozzles, and reducing the stability of the lubricating film. As a result, the risk of surface scratches increases, machining quality decreases, and downtime related to filtration and coolant replacement becomes more frequent. A magnetic separator for machining fluids solves this problem by automatically and continuously capturing metal particles without interrupting the production process. This allows the working medium to maintain consistent operating parameters, while the cooling system remains stable even under intensive working conditions. What do you gain by implementing a magnetic separator in a coolant system? Continuous coolant cleanliness – without the need to stop production. Protection of pumps and circulation components by reducing abrasive particle contamination. More stable machining quality (fewer scratches and improved process repeatability). Extended coolant service life and reduced disposal costs. Lower failure rates and reduced maintenance costs of filtration systems. Improved waste management – automatic removal of collected chips outside the working area. Why is magnetic separation more effective for removing ferromagnetic particles? Unlike traditional mechanical filters, which require periodic cleaning and may experience reduced flow due to filter clogging, magnetic separation operates continuously with minimal maintenance requirements. A magnetic coolant separator removes ferromagnetic particles consistently, maintaining stable fluid flow and high machine availability. Design and operating technology The device has been designed to mechanically and continuously separate metallic contaminants from process fluids. The main working element is a stainless-steel magnetic drum, which rotates and attracts ferromagnetic particles from the flowing coolant. The collected contaminants are then removed and transported outside the working area. The removal of collected particles is carried out by a shaft system: Magnetic shaft – responsible for capturing and holding metal particles during the separation process. Rubber-coated pressure shaft – stabilizes the removal of contaminants and assists in directing them into the waste container. Standard equipment Magnetic separator with stainless-steel magnetic drum Rubber-coated pressure shaft Working tank Electric drive Technical specifications Parameter Value Width of rubber-coated pressure shaft 140 mm Diameter of rubber-coated pressure shaft 65 mm Width of magnetic shaft 140 mm Diameter of magnetic shaft 110 mm Inlet connection 50 mm Outlet diameter 53 mm Motor power 0.25 kW Capacity up to 25 l/min Bodpfsycc Rpsx Ac Tsdg Weight 35 kg

Condition: good (used), Year of construction: 2019, Esta Dustomat 62 Dust Extractor The best-selling, certified dust extractors The professional-grade Dustomat 21-67 series meets the highest standards. These units can be used both as mobile units at individual workstations and centrally for simultaneous extraction at multiple locations. Depending on the unit size and the nozzle diameter of the processing machines, extraction can be performed simultaneously at up to six locations. The permanent filter cartridges are cleaned manually, with a motor, or with compressed air, depending on the unit model. • Compact and powerful • Low operating costs • Easy dust disposal • Can be used as a mobile single-station or central extraction system • Suitable for almost all types of dust • Optional certification for special applications Areas of application: - Single and multi-station extraction in industry and trade - Free-flowing dusts - Dry shavings Bdedjyftxvopfx Ac Tog Special features: - Four filter cleaning methods: manual, motorized, pneumatic, and jet cleaning - Cleanable permanent filter cartridges (dust class M) - Post-filter cassettes (dust class H) available as an option Manufacturer: Esta Type: Dustomat 62 Connection voltage: 400 V Connection diameter: 160 mm Drive power: 3 kW Filter area: 9.6 m² Dust collection container: 200 liters Mobile collection container Max. negative pressure: 4,600 Pa Max. air volume flow: 1,850 m³/h Dimensions: 1,830 x 782 x 2,040 mm Year of manufacture: 2019 Weight: 265 kg Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Bedpfx Asylb Ixoc Tsdg Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Washing machine which can wash a tote bin and its lid at the same time. Excellent condition. Bodpfx Asv Ihgvoc Tedg

Year of construction: 2024, condition: used, Applications and use: The separator is best suited when a light excavator needs to handle heavy, stubborn materials. It is derived from the wider TSC.154 and features the same drive and bearing assembly, resulting in increased power output on a smaller screening surface. The built-in star discs are 5 mm thicker than the standard discs and are additionally fitted with welded-on wear protection. The disc separation gap is 20 mm, resulting in a screened particle size of 0-25/30 mm, ideal for producing backfill material. Price does not include the mounting plate. Bsdpfx Acsw Rkxqe Tjdg Adapters for excavators can also be custom fabricated and supplied upon request. Price on request. For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 30 - 45 m³/hr Leak oil connection required: no

Year of construction: 2024, condition: used, machine/vehicle number: TSC.153.042, Wolf Bucket Separator Terra-Star Compactline TSC.153 continually astonishes customers with its high throughput. The TSC.153 requires only 20 to 30 seconds for a capacity of 0.95 m³. With 50 fillings, this results in well over 45 m³ per hour. The ability to quickly and easily change the shafts makes the Terra-Star Compactline series unique in the market. Bdjdpfx Acsw Rqz Eo Teg The separator is equipped with screening shafts and star discs with a separation gap of 15mm – producing a grain size of 0-20/25 mm. Tools in the wear zones are armoured with hardfacing wire. Price without adapter For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 34 - 50 m³/h Drain line connection required: 2

Year of construction: 2021, condition: used, machine/vehicle number: TSC.153.028, Wolf bucket separator Terra-Star Compactline TSC.153 continuously impresses customers with its high throughput. The TSC.153 requires only 20 to 30 seconds to process a capacity of 0.95 m³. With 50 fills, this results in well over 45 m³ per hour. The ability to quickly and easily convert the shafts makes the Terra-Star Compactline series unique on the market. The separator is equipped with screening shafts, star discs with a separation gap of 30mm – producing a grain size of 0-35/40 mm. In wear zones, the tools are reinforced with hardfacing wire. Bdjdpfsw Skvrex Ac Teg Price without adapter For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 34 - 50 m³/h Leak oil connection required: no

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Bdsdpfx Acsxnqauo Tog Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse