Used Compair Compair Regatta 160A for sale (173)

Condition: used, mileage: 24,460 km, power: 175 kW (237.93 HP), first registration: 10/2007, fuel type: diesel, empty load weight: 16,755 kg, maximum load weight: 1,245 kg, overall weight: 18,000 kg, axle configuration: 4x2, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, front tire size: 385/65R22.5, rear tire size: 315/80R22.5, Equipment: ABS, additional headlights, cabin, central locking, compressor, cruise control, differential lock, low noise, onboard computer, power assisted steering, Vehicle location: Bovenden, registration no. house, swivel seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, switch 6, ABS (anti-lock braking system), constant throttle, power take-off, differential lock, work lights, rotating beacon, storage box, fire extinguisher box, leaf spring suspension, low-noise G1, U-protection, side aluminum driving protection, roof hatch, emergency stop, foldable, 4-point hydraulic support, radio remote control, environmental badge green, compressor radio remote control, green environmental sticker, compressor Superstructure: 8.5m AMV lifting platform with CompAir compressor and radio control 7.5t front axle, rear axle H7 13t disc wheel 233, ABS, disc brakes with full protection on front and rear axle, rear axle stabilizer, steel bumper, configurable special module (PSM), additional thermal insulation, pollen filter, on-board diagnostics 1, automatic daytime running lights, flame arrester, transmission oil cooling, rear engine output for hydrp. SAE-B max 200Nm, auxiliary drive MB 60-2 MPA low position, N speed. Working height 8.5m, max. load 1,000kg Approx. 1510 operating hours! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ljdpfevhh Duox An Uoab - .

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General specifications: ----- Drive motor power: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Lodpfx Ajhga S Djn Uoab Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE150 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 Lsdpfxohga Sco An Usab CE150-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 110 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Laodpswbuyzofx An Uob

Condition: used, machine/vehicle number: Prüfstand Antrieb, performance 110 KW tension 400 V Ledpfjdfm Nrjx An Ujab speed 1,500 to 5,000 rpm adjustable motor with - frequency converter - incremental encoder, line choke, network filter - external fan emergency stop device manual control unit *frequency converter:* type: VCD 4 S 160A AZ/NS serial number: BKQ4S160AN20A-1 output: 207 KVA motor performance up to 160 KW total weight approx. 1,000 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SEW400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Stock: approx. 29 linear meters – Price is per meter! Type BD2C-3-400-SB3 / 400 Amps – 5-pole – L1 L2 L3 N PE – copper – no aluminum conductors! Lasdpjw Etm Iofx An Ujb Rated voltage Ui max. 690V, frequency 50 – 60 Hz Busbar lengths: 17x 3.25m, 1x 2.25m, 5x 1.25m Price per meter includes connectors, end caps, and mounting brackets Feed-in and distribution boxes in 16-32-63-125-250A are available as options Dismantling was carried out by a certified electrician. Busbars are in excellent condition!!!! Please inquire for your required lengths or accessories! In stock, available immediately!!! Attention: 100A, 160A, 250A, and 400A busbars are also available – please inquire!!! ----- Old Klöckner Moeller BD1 system still available! Busbars, elbow sections, feeders, and distribution boxes for the old Klöckner Moeller BD1 / BD 1 system in stock!!! Are you also looking for a crane system?

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 68178, Technical characteristics: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse in Z: 30 m/min - Standard closed workpiece automation via gantry loader and individual nest conveyor system Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Continuous power (100% duty cycle): 38 kW - Continuous torque (100% duty cycle): 300 Nm Tool Turret with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm - Torque capacity per driven station: 70–100 Nm Electrical Equipment Laodpexwk Iwofx An Ujb - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Total dimensions: Length = 3,390 mm; Width = 2,850 mm; Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy workpiece loading/unloading - CNC control: Siemens 840D SL - High precision: Positioning accuracy in X and Z axes by Heidenhain linear scales - Main spindle (Weiss): High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Live tooling via Sauter turret: Extends machining capability to include drilling and milling - Cooling and paper filter unit: DGS System GMBH, 950L - Chip conveyor: DGS System GMBH - Hydraulic power unit: Rexroth, flow Q = 13 l/min, max. pressure = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation available: Yes Machine Condition: NOT WORKING - Loading/unloading sliding doors defective - Linear scale X axis (2 units) - Turret position sensor (furT30) - Spindle clamp/unclamp sensor - Emulsion solenoid valves (4 units)

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 66101, Technical Specifications: Work Area - Maximum diameter of the clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / X-axis rapid traverse: 60 m/min - Z-axis travel: 250 mm / Z-axis rapid traverse: 30 m/min - Y-axis travel: +100/-90 mm / Y-axis rapid traverse: 30 m/min - Standard closed workpiece automation: Pick-up station from individual nests, conveyor system Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Power (continuous duty): 38 kW Lasdpfx Asxwk S Asn Ujb - Torque (continuous duty): 300 Nm Tool Holder with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm, Torque capacity: 70–100 Nm per driven station Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Overall dimensions: Length = 3,390 mm, Width = 2,850 mm, Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimized for efficient chip removal and straightforward loading/unloading - Control system: Siemens 840D SL - High precision: Positioning accuracy in X, Y, and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Integrated systems for part feeding and removal - Live tooling (Sauter turret): Enables drilling and milling operations - Cooling & paper filtration unit: DGS System GMBH, 950 L - Chip conveyor: DGS System GMBH - Hydraulic unit: Rexroth Q = 13 l/min, pmax = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation: Available Machine Condition: NOT WORKING - Pick-up pneumatic cylinder - Turret indexing motor - Door closing pneumatic piston - Door safety switch (Euchner) - Z-axis linear scale - Siemens power supply

Condition: new, Year of construction: 2026, neu 2026 080186 prompt, Zwischenverkauf v Türkei 81476 € 1309.77 € 1 69300 € 135 to 3050 mm Y1 / Y2 / X und RAchse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 120 mm/s 500 mm 500 mm/s 350 mm/s 250 mm 900 mm 150 l 15 kW 4250 mm 1700 mm 2850 mm 9580 kg Special campaign Special price and SKY 22 control free of charge Standard accessories: 4 axes (Y1, Y2,X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size Lodpfx Anowirtnj Ujab - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010/A /75°/0.8/105, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SEW1000A, Complete Klöckner Möller - Siemens BD2 - 1000A Busbar System available! Stock: 34 running meters - Price is per meter! Type BD2C-3-1000-SB3 / 1000 Amps - 5-pole - L1 L2 L3 N PE - copper conductors only, no aluminum! Voltage Ui max. 690V, frequency 50 - 60 Hz. Busbar length: 10 x 3.25m, 1 x 2.25m. Price per meter includes connectors, end caps, and brackets. Feeder and tap-off boxes 16-32-63-125-250A are optionally available. Disassembly was carried out by a qualified electrician. Busbars are in top condition! Please inquire about your required lengths or accessories! Stock item, immediately available! Laodpfx Aew Etmbon Ueb Note: 100A, 160A, 250A, and 400A busbars also in stock – please inquire! ----- Old Klöckner Moeller BD1 system still available! Busbars, corner pieces, feeder units, and tap-off boxes for the old Klöckner Moeller BD1 / BD 1 system in stock! Are you also looking for a crane system?

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 106000809860, battery voltage: 24 V, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Voltage: 24 V Input current: 5.6 A Lasdpeyk Eutofx An Usb Output current: 150 A Frequency: 50 Hz FEATURES REMA 160A battery connector 16A plug All dimensions are approximate. No liability is assumed for typing or measuring errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY with payment confirmation by email! Collection WITHOUT prior notice Monday to Friday, 7:00 a.m. to 4:30 p.m. If the mast is too high for transport, it can be dismantled upon request. If the machine is not collected within the agreed time, a storage fee of €20 per machine per day will be charged (the outstanding payment must be settled before collection).

Condition: used, Year of construction: 2009, functionality: fully functional, Offered is a turning and milling machine EMAG VLC 800 MT with tool changer. The machine has a turret with 12 tool positions (VDI 50) and a milling spindle with tool changer for up to 96 tools. The tool magazine can be loaded during processing, which reduces setup time and allows the use of sister tools. The proven EMAG turret is available for turning operations on the machine. On the multifunctional VLC 800 MT production center, workpieces up to 800 mm in diameter can be completely processed in a single clamping. The following components will be sold with the machine: - Pick-up station - Extraction unit (IFM) - Coolant system with belt filter - Chip conveyor CONTROL Siemens 840D MACHINE CONNECTION Mains voltage: 400V AC 50 Hz Connected load: 92kW Rated current: 143A Max. backup fuse: 160A Ljdpfx Aow Au U Uon Uoab The machine is sold on an “as seen” basis, without any warranty claims. The machine will be available from November 2025, machine is in production until Oktober. The machine can be completely overhauled on request. Please do not hesitate to contact us fot further information.

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator Lodpfx Anjxal A Uo Ueab + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, input voltage: 460 V, power: 60.2 kW (81.85 HP), input current: 85 A, input frequency: 50 Hz, Equipment: type plate available, GWK Compact Chiller, Industrial Cooling and Heating Unit, weco 48.1 wzttx + twd 6, weco e b 5x15 w m25 pt 4x x c x Technical Data: Operating voltage: 400/460V AC ±10 % Rated current: 85A Max. circuit protection: 160A Frequency: 50/60Hz Control voltage: 24/230V Electrical connected load: 60.2kW Ledpfxex Apzmj An Usab Wiring diagram no.: 489885 Rated cooling capacity: 15/18kW Max. operating temperature: 80°C Refrigerant: R449A Max. fill weight: 10kg CO₂ equivalent: 13.97t Global Warming Potential: 1397 Max. operating overpressure Psh: 23bar Max. operating overpressure Psl: 10bar Compressor volume flow: 140/168m³/h Compressor speed: 1450rpm Compressor final pressure: 29.5bar Important Note: Contains fluorinated greenhouse gases covered by the Kyoto Protocol!

Condition: excellent (used), functionality: fully functional, type of input current: AC, power: 47.7 kW (64.85 HP), input current: 80 A, GWK Compact Chiller, Industrial Cooling and Heating Unit, weco 48.1 wzttx + twd 3, weco e z 3x10 w m25 pt 5 x x c x General Information: Compact industrial cooling and temperature control unit for regulating process media. Designed for high-temperature process cooling and temperature control applications. Technical Data: Operating voltage: 400/460V AC ±10 % Rated current: 80A Maximum pre-fuse: 160A Frequency: 50/60Hz Control voltage: 24/230V Electrical connected load: 47.7kW Wiring diagram number: 489948 Rated cooling capacity: 10/13kW Maximum operating temperature: 90°C Refrigerant: R449A Maximum filling weight: 13.6kg CO₂ equivalent: 19.07t Global Warming Potential: 1397 Max. operating overpressure Psh: 23bar Max. operating overpressure Psl: 10bar Compressor displacement: 102/121m3/h Compressor speed: 1450/1750rpm Compressor final pressure: 29.5bar Important Note: Laodox Apxfepfx An Uob Contains fluorinated greenhouse gases covered by the Kyoto Protocol!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, input voltage: 400 V, power: 65.9 kW (89.60 HP), input current: 102 A, GWK Industrial Cooling and Heating Unit, weco 48.1 wzttx + twd 18, weco e b 20 w m20 pt 5x x c x Technical Data: Operating voltage: 400/460V AC ±10 % Rated current: 102A Max. pre-fuse: 160A Ledjx Aprlspfx An Ujab Frequency: 50/60Hz Control voltage: 24/230V Electrical connected load: 65.9kW Circuit diagram number: 489850 Rated cooling capacity: 20/25kW Max. operating temperature: 30°C Refrigerant: R449A Max. charge weight: 10kg CO₂ equivalent: 13.97t Global Warming Potential: 1397 Max. operating overpressure Psh: 23bar Max. operating overpressure Psl: 10bar Compressor displacement: 140/168m3/h Compressor speed: 2900/3500rpm Compressor end pressure: 29.5bar Important note: Contains fluorinated greenhouse gases covered by the Kyoto Protocol!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 52400 € 990.36 € 60 to 1250 mm 3 (Y1, Y2, X) Lsdpfxowird To An Ueab 265 mm 1050 mm 450 mm 530 mm hydraulisch 200 mm/s 10 mm/s 110 mm/s 650 mm 500 mm/s 900 mm 104 mm 100 l 7.5 kW 2300 mm 1550 mm 2850 mm 4700 kg Standard accessories: 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 94120 € 1778.87 € 175 to 4050 mm Y1 / Y2 / X Achse 265 mm 3600 mm 450 mm 530 mm hydraulisch Laedowiqr Nopfx An Ujb 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW 5250 mm 1700 mm 2850 mm 12780 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57920 € 1094.69 € 60 to 2050 mm 3 (Y1, Y2, X) 265 mm 1700 mm 450 mm 530 mm hydraulisch 200 mm/s 10 mm/s 110 mm/s 650 mm 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 100 l 7.5 kW 3200 mm 1550 mm 2850 mm 5600 kg 650 mm 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... Lodpjwirivsfx An Ujab optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 69320 € 1310.15 € 100 to 3050 mm Y1 / Y2 / X Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 180 mm/s 10 mm/s 120 mm/s 500 mm/s 900 mm 104 mm 11 kW 4200 mm 1670 mm 2850 mm 8500 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC CONTROLLED CROWNING TABLE upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Laedpfx Aswirdmen Ujb Quick Release Clamping

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 137900 € 2606.31 € 220 to 6050 mm Y1 / Y2 / X Achse 265 mm 5100 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 1050 mm 154 mm 250 l 22 kW 7500 mm 1770 mm 3350 mm 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF:- more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... PRICE FCA TÜRKIYE optional equipment: R-axix Z1/Z2/R-axes DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) Laedpfx Aewiq R Son Uob CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 100920 € 1907.39 € 220 to 4050 mm Y1 / Y2 / X Achse 265 mm 3600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 22 kW 5250 mm 1770 mm 3000 mm 14750 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping Ledpfx Answirwgs Uoab

Condition: new, Coolers, models Kaeser, Atlas Copco, Compair COOLER – Atlas Copco GA all models COOLER – KAESER all models OIL COOLER Lodpfjx I E Ayox An Usab