Used Bravo Pasto Turbine Trt 120 Trittico Used Bravo for sale (50,520)

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE Ljdpfozi Duhex Aigjrr A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: good (used), functionality: fully functional, Velox 350 crosscut saw with roller conveyor approx. 5000 mm Machine ready for immediate use 1.5 kW, 380 Volt 2 speeds Double mitre cuts possible Transport available at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers. Lrjdpfxst Ta Uro Aigsr

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,794 h, load capacity: 2,000 kg, lifting height: 122 mm, fuel type: electric, construction height: 1,419 mm, fork length: 1,200 mm, empty load weight: 706 kg, total length: 2,391 mm, drive type: Elektro, construction width: 770 mm, Low lift truck Load center: 600 Lsdpfx Aiozhydpsgjrr Condition: Reconditioned without warranty Technical condition: very good Battery Volt: 24V Battery Ah: 250Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of construction: 2017 Battery condition: 60 - 80% Description: Inspection and UVV new Tandem load rollers, electric steering, drawbar can be operated from all sides, suspension of the driver's platform, fixed driver's platform, ISM module

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,398 h, load capacity: 2,000 kg, lifting height: 122 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 733 kg, total length: 1,919 mm, drive type: Elektro, construction width: 770 mm, Low-lift pallet truck Load centre: 575 mm Technical condition: very good Lredpezhyf Tofx Aiger Battery voltage: 24V Battery capacity: 390Ah Battery manufacturer: Jungheinrich Battery type: Lithium-ion Battery year: 2021 Description: Inspection and UVV (accident prevention) newly conducted Features: Initial lift, lithium-ion technology, mini display, access via PIN code, electric steering, tandem load rollers, tiller operable from all sides.

Condition: ready for operation (used), Diameter range: 45 – 100 mm Height range: 20 – 115 mm Production capacity: up to 150 pcs/min Lodpfoyyq I Esx Aigjrr

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 9714-4549, warranty duration: 6 months, year of last overhaul: 2026, total length: 1,270 mm, total width: 800 mm, total height: 130 mm, tank capacity: 180 l, empty load weight: 570 kg, power: 8 kW (10.88 HP), electrical fuse: 32 A, Used machine 6 months warranty Completely disassembled, mechanically overhauled, and repainted by our technicians Electrically reinstalled by a specialist company for control systems Advantages: + Solid construction, perfect condition, very smooth operation + Mobile machine, on height-adjustable feet, with a fixed bowl + Bowl and spiral made of stainless steel + Flour dust hood, with automatic shut-off + Equipped with two new original DIOSNA timer switches + Bowl rotation direction: left/right + Complete overhaul in our workshop, according to German quality standards + All electrical work carried out by a local company specializing in control system construction + Only high-quality original parts are used + Machine has been inspected and approved by our master baker and pastry chef + Delivered with German operating manual Technical data: - Flour capacity: max. 75 kg - Dough capacity: max. 120 kg - Bowl volume: 180 liters - Bowl diameter: 750 mm - Bowl height (top edge): 805 mm Lodpfsivdykox Aigsrr - Motor power: 8 kW (kneading spiral & bowl drive) - Connection values: 380V - 3Ph - 50Hz - 32A-CEE-plug - Dimensions: 80 x 127 x 130 cm (WxDxH) - Max. height with hood open: 189 cm - Net weight: 570 kg

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Lredoitcu Eepfx Aigjr Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Meta (Thyssen) Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: orange INP profile: 120 x 58 mm Agraffe: 3 hooks Clear width: 2,700 mm Maximum load per pair of crossbeams: 3,000 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized Ledpfx Aisibmhfsgerr For securing the longitudinal supports against unintentional lifting.

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal shears with stop and stable base -Cutting insert length: approx. 160 mm Ljdpfxsibw Dxj Aigsrr -Lever arm: with rack and pinion transmission -Lift-down device: infinitely adjustable -Overall dimensions: 1000/780/H1870 mm -Transport dimensions: 1000/780/H1300 mm -Weight: 100 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Handover in the current condition, as inspected -Receptacle and handwheel for adjustment are missing -Manufacturer engine Prym type: AD80KZ4 -Manufacturer gearbox Prym type: L8-U16 -Motor power: 0.55 kW -Speed range: 24-120 rpm -Motor: adjustable -Construction: B3 -Drive shaft: Ø 24 mm -Dimensions: 535/230/H220 mm -Weight: 28 kg Lodpfx Aechbv Dsigorr

Condition: good (used), Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: Scoring sheet materials, laminates, ... -carbide-tipped Ljdpsb D I Diefx Aigerr -Weight: 0.3 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg Lrodpfjb A Ntbsx Aigor

Condition: used, Rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Actuator for: gate valves, locks, ball valves ... -Construction: hollow shaft -Diameter hollow shaft: 120 mm -Number: 3x drives available -Price: per piece Lodpocnzruefx Aigjrr -Dimensions: 1700/500/H650 mm -Weight: 450 kg

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Knetspirale kneading tool Spiral for Diosna spiral Lrjdpfx Aijcphnqegjr Model: SP 120D stainless steel More Knetspiralen upon request!

Condition: used, Heating, gas and oil burners, burner control, burner flap control, flue gas flap control Lrjdpfjhibmgex Aigsr -Burner control: Flap control burner -Type: unfortunately no type designation -Shaft: Ø 12 x 25 mm -Hole spacing: 50/65 mm M6 -Dimensions: 120/120 / H140 mm -Weight: 1.5 kg

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec Lsdpfx Aiek S Dt Tegsrr - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: good (used), Clamping angle, clamping aid Lodpfxelg H I Se Aigerr -Clamping angle: for workpiece clamping -Wall thickness: 41 mm -Groove width: 25/22 mm -Dimensions: 150/120/H218 mm -Weight: 9.7 kg

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Lsdpfx Aiov Nzpgjgorr Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: good (used), Year of construction: 2017, operating hours: 11,956 h, functionality: fully functional, machine/vehicle number: 669613, overall weight: 1,192 kg, load capacity: 120 kg, arm reach: 3,500 mm, This is a KUKA KR 120 R3500 prime K industrial robot with a KRC4 controller, manufactured in 2017. We would also be happy to offer you this robot as a fully refurbished unit! The controller includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt Ljdpfx Aiozgxategerr RemoteService SafeOperation UserTech

Condition: good (used), Year of construction: 2018, Desk, work table, assembly bench, assembly table, workbench, multi-purpose table -Manufacturer: Ceha, Multi-purpose table type PM-120-60 Lsdoywuvzjpfx Aigerr -Width: 1200 mm -Depth: 600 mm -Height: 720-750 mm -Load capacity: 100 kg -Table: easily disassembled / storable -Number: 11 tables available -Price: per piece -Transport dimensions: 1200/600/H72 mm -Weight: 16 kg/pc.

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence Ljdeymyp Rjpfx Aigorr - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,230 h, load capacity: 1,200 kg, lifting height: 2,900 mm, fuel type: electric, mast type: simplex, construction height: 1,943 mm, fork length: 1,150 mm, empty load weight: 907 kg, total length: 756 mm, drive type: Elektro, construction width: 770 mm, High-lift pallet truck Load center: 600 Mast type: Standard Technical condition: good Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 213Ah Battery year of manufacture: 2023 Description: Thorough cleaning, black paint refresh, new wheels/rollers, new inspection, new acceptance test according to FEM Ljdpfxeyh R Rfe Aigerr Impulse control, CE certificate

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Lodpfx Asy Nrynjigorr

Condition: used, Year of construction: 2017, load capacity: 12,000 kg, lifting height: 2,900 mm, total length: 4,950 mm, Electric forklift Raniero AC 120-6 Drive Electric Year built 2017 Lrjdpfx Aoy Nfk Heigor Lifting height (mm) 2,900 Lifting weight (kg) 12,000

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L - Ultrasonic generator Martin Walter MW 2000 WMI - The previously installed printer is missing Ledpfxezlnb Rj Aigjrr - One or two air hoses are leaking - A test camera is missing - Shipping is possible for an additional charge.