Used Band Saw Semi-Automatic for sale (33,046)

Condition: new, neu ca. 4-6 Monate ab Auftrag Türkei 12200 € 234.24 € Schwenkrahmen 3660x27x0,9 mm 20-100 m/min 320 mm 300 mm 320x300 mm 640 mm Ijdpfx Asynmxhokpstn 0.37 kW 2 kW 0.12 kW 1900 mm 850 mm 1300 mm 770 kg Roller material feed with encoder and NC control blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity Itedpjv Iccfefx Akpen • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: used, Year of construction: 2007, cutting diameter 400 mm Isdpfx Akezfqh Hopetn saw band length 4715 mm cutting width 1,3 mm main drive motor 7,5 kW Roller conveyor length 4000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm total power requirement 14 KVA weight of the machine ca. 7,5 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, cutting diameter 330 mm saw band length 4115 mm Iedpfx Akszfqhmopetn cutting width 0,9 mm main drive motor 3,7 kW Roller conveyor length 5000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm total power requirement 13 KVA weight of the machine ca. 1,8 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Itjdpsgwt Rvefx Akpsn

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Manufacturer - Vigo Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Itsdpfx Aker I Ddkspsn Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 21700 € 416.64 € Doppelsäulenführung 4900 x 3,4 x 1,1 mm 15 - 120 m/min 325 mm 320 mm 400 x 320 mm rund 280 mm, rechteck 240 rund 180 mm, rechteck 180 650 mm 0.55 kW 3 kW 0.12 kW 2425 mm 1050 mm 1600 mm 1250 kg Iedpfxjz Afcgo Akpstn Linear guides Sensitive cutting pressure control Bi-metal saw blade (34 mm) Coolant system Thermal overload protection Hydraulic-mechanical blade tensioning Saw blade brush Hydraulic clamping of the vise Optical height adjustment Heavy-duty gearbox Band inclined at 2° Infinitely variable cutting speed Digital display for miter angle Hydraulic locking of the miter adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27600 € 527.16 € Doppelsäulenführung 5750 x 41 x 1,3 mm 15 - 120 m/min 460 mm 460 mm 520 x 460 mm 585 mm 0.55 kW 4 kW 0.12 kW 3000 mm 1200 mm 1800 mm 1650 kg Roller feed with manually adjustable stop with micro switch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Mechanical upper clamping Iedpfx Akeynnhqepetn Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 16700 € 320.64 € Schwenkrahmen 4800x34x1,1 mm 15 - 120 m/min 360 mm 360 mm Itodpsw Np N Eofx Akpjn 510x360 mm rund 360 mm, quadrat 360 rund 250 mm, quadrat 220 rund 280 mm, quadrat 260 860 mm 0.37 kW 3 kW 0.12 kW 2650 mm 1210 mm 1870 mm 1450 kg Hydraulic vice Inverter for contious variable band speed Continuously adjustable saw arm lowering speed Hydromechanical blade tension can be read via pressure gauge Control panel Chip brush Coolant equipment Operating instructions in German or English

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 22700 € 435.84 € Doppelsäulenführung 4800x34x1,1 mm 20-100 m/min 380 mm 380 mm Itodpfx Aoynng Tjkpon 430x380 mm 590 mm 0.55 kW 3 kW 0.12 kW 2900 mm 950 mm 1660 mm 1342 kg blade brush control panel hydraulic vice optical adjustment switch hydromechanical blade tension inverter mechanic top clamping material limit shaft coolant pump saw blade security switch gearbox pressure adjustment 1,2 meter roller table user manual in GERMAN or ENGLISH

Condition: excellent (used), Year of construction: 2013, cutting diameter 400 x 260 mm saw band length 4640 mm cutting width 400 mm Itedpfx Ajymqwljkpen total power requirement 8 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,6 x 1,8 x 1,8 m

Condition: new, neu ca. 14 - 16 Wochen ab Auf Isdewiqx Ajpfx Akpotn Türkei 46400 € 886.24 € Doppelsäulenführung 6800x41x1,3 mm 20-100 m/min 560 mm 820 x 540 mm rechteck 550 x 540 mm rechteck 360 x 540 mm rechteck 550 x 540 mm 880 mm 1.1 kW 4 kW 0.12 kW 3800 mm 1750 mm 2350 mm 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available, additional price)

Condition: used, total height: 3,270 mm, total length: 2,700 mm, total width: 2,250 mm, Colour: Green Weight: 4.000 kg Price: On request Itodpfx Akjz Rz E Sopjn - Serial number: U5624 - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1200 - Max. cutting to feed roller opening [mm]: 450 - Max. cutting to stop opening [mm]: 330 - Max. cutting height [mm]: 320 - Table width [mm]: 1000 - Table length [mm]: 1150 - Max. band saw width [mm]: 130 - Voltage [V]: 400 - Current consumption [A]: 46.5 - Fuse [A]: 63 - Power [kW]: 22.0 - Transport dimensions: 2700mm x 2250mm x 3270mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Iedjfg E Hzepfx Akpstn Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: used, Year of construction: 2004, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope Isdpezczhtsfx Akpjtn of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 1978, cutting diameter / mm saw band length 8800 mm cutting width / mm total power requirement / kW weight of the machine ca. / t Iedpfx Aksy S Drbspotn required space / m

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm Itjdpfxofg E H De Akpon band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Iodpjd H Hmhofx Akpjtn Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Year of construction: 1995, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 25 mm Itodpfx Akozp Iu Sspjn dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: new, 460 mm 460 mm 460 x 460 mm saw band length 5450 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,2 t dimensions 2,675x 2,15 x 2,05 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity Ijdpfsfg E Hvox Akpotn and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, 330 mm 330 mm 400x330 mm saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 2,35 t dimensions 2,23 x 2,15 x 1,8 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation Itedpfefb Nbgox Akpen • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 46700 € 891.97 € Doppelsäulenführung 8200x41x1,3 mm 20-100 m/min 810 mm 750 mm 910x750 mm rund 600 mm, quadrat 600 rund 360 mm, quadrat 360 725 mm 4 kW 0.12 kW 4020 mm 1600 mm 2450 mm 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH Itedpfoynm Rkex Akpjn OPTIONS: Hydraulic vertical clamping Micro cooling unit Laser liner

Condition: new, Year of construction: 2026, Do you cut hardened or stainless steels on a cheap abrasive saw? Upgrade your production to a high-safety, PLC controlled, industrial hot saw. S200 is a semi-automatic abrasive (hot) cutting system designed for cutting stainless and hardened steels, as well as matrix-type materials like rubbers, threads, carbon fibre, which require high RPM cutting. Suitable for single or (bundled) multiple tubes cutting at once. Full pneumatic liftable guard (including tunnels 900 mm either side) preventing saw access and safely capturing all sparks from the cutting process. Opening and closing of the guard with a press of a button for a full unimpeded saw table access with safety switch disabling the saw on lifting of the guard. Saw cooling by forced air circulation and convection design. Optional vacuum extraction system for dust collection. • Ø200 mm abrasive cutting disc with 1.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • Precision machined and balanced high-RPM spindle and drive unit • Precision 90° cuts with smooth performance and long service life. • 2x vertical clamps with adjustable clamp pressure Itsdpfx Asmcbk Uekpon • Adjustable feed control of up / down cutting cycle. • Rapid blade changeover system minimising time. • Air gun and LED interior light • 1× Ø100 mm attachment points for dust collection • Optional 2.2 kW vacuum extractor Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture

Year of construction: 2020, condition: new, Available from stock Strip dimensions: 4420 x 34 x 1.1 mm Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm bundled cutting: 180 - 280 x 50 - 160 mm Isdpfeiryf Sex Akpotn Cutting speed: 35 - 85 m/min Motor power main drive: 3.75 kW Engine power hydraulic pump: 0.75 kW Motor power coolant pump: 0.125 kW table height: 755 mm Weight: 1680 kg Dimensions W x D x H: 2400 x 2120 x 1840 mm

Condition: new, Semi-automatic band saw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Itodpjfibd Tofx Akpen Belt drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Properly sized flywheels. Heavy-duty belt guides made with sealed guide bearings and adjustable carbide inserts. Belt tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm. Cutting angle: 60° left, 60° right. Adjustable stop for making cuts of the same size. Brush-type belt cleaning device. Hydraulic power unit motor: 0.37 kW. Electric pump: 0.09 kW for belt cooling. Vise, jaw height: 200 mm. Vise, jaw length: 185 mm. Worktable height: 760 mm. Machine weight: 820 kg.