Used Avermann Avos Bp 1411-60 for sale (22,123)

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1250 mm Cjdperyal Asfx Ad Ishc -Shots: 15/12 mm see photo -Quantity: 1x transport rollers available -Dimensions: Ø 60 x 1250 mm -Weight: 5.2 kg

Condition: used, Gears, spur gears, bevel gears, worm gears Codjit Rmiopfx Ad Ishc -Gear: bevel gear type E 080 B -Translation: i 24 : 1 -Shaft: Ø 12 x 25 mm -Hollow shaft: Ø 12 x 65 m -Dimensions: 140/60/H90 mm -Weight: 1.5 kg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Chedpsh D If Hefx Ad Ioc Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: good (used), The scope of delivery includes: 1x used shelf connector Chodpji Euu Rsfx Ad Iec Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm for a shelf spacing of: approx. 500 mm Suitable for a frame profile: 120 mm Profile dimensions: approx. 60 x 40 mm Borehole diameter: approx. 10 mm Weight: 1.75 kg/piece.

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Chodsgrzh Ejpfx Ad Iec Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Codped Sg Hcsfx Ad Iohc Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: - 3 Mandrels Chjden Smq Iepfx Ad Isc - Mandrel retraction unit - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Included in the scope of delivery: 1x shelf connector, used Material color: white For a shelf spacing of: approx. 850 mm Profile dimensions: approx. 60 x 40 mm Headplate dimensions: approx. 140 x 116 mm 8x screws M10 x 35 mm 8x nuts M10 8x washers M10 Cjdpfxodl D T Ij Ad Ishc Two single shelves placed one behind the other are connected with shelf connectors to form double shelves. Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions - Shelf testing Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems - Delivery with our own fleet (without unloading)

Condition: used, DECKEL MAHO DMC 60 U 5-axis universal machining centre, built 2002. Travels 600 x 700 x 600 mm with rapid traverse up to 40 m/min. The 12.000 rpm motor spindle in SK 40 DIN 69871 delivers 28 kW (40% ED) / 19 kW (100% ED) and is carried by an automatic universal swivel milling head with controlled B axis, working together with an NC rotary table to give full 5-axis capability. Siemens SINUMERIK 840D 3D path control. Rotary pallet changer with 2 pallets of 630 x 500 mm, 600 kg each, plus clamping hydraulics for hydraulically actuated fixtures on the rotary table and pallets. 60-pocket SK 40 magazine with horizontal double-gripper changer. Fitted with internal coolant supply and a 900 l coolant tank, chip conveyor, RotoClear rotating viewing window and Blum laser tool measurement in the work area. Cedpfxjznffre Ad Ishc

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head Cjdpfx Adszqyw Is Ijhc -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numroto 3D Simulation Software, Chjdpfx Ajyv Hv Rjd Iec Numroto 3D Collision Detection Software, Numroto Form Cutter Software, Pallet loader CNC handwheel Control cabinet cooler, automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. X axis travel: 800 mm Y axis travel: 270 mm Z-axis travel: 660 mm B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow

Condition: used, machine/vehicle number: 14022, Rotor diameter: 350 mm Rotor width: 620 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 620 x 450 mm Drive motor: 22 kW Chodszp Slzjpfx Ad Isc

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 1,500 kg, empty load weight: 353 kg, Fork Positioner Load center: 600 Condition: Ready for use and fully functional Chsdpjzt Drnofx Ad Iec Technical condition: very good Description: German SH Fork Positioner P1-ZVB 15 No.: R0813 Year of manufacture: 2014 Manufacturer: SH Anbaugeräte Type: P1-ZVB 15 Serial/part number: 2013-600385 Load capacity: 1,500 kg Load center: 600 mm Center of gravity: 270 mm Mounting dimension: 200 mm Weight: 353 kg Design: hydraulic fork positioner Condition: ready for use and fully functional Visual condition: very good Technical condition: very good This attachment is a hydraulic fork positioner. The fork spacing can be conveniently adjusted hydraulically directly from the driver's position and adapted to the respective load. Due to the width of the mounting, this version is more commonly used on reach trucks. The actual compatibility with the respective forklift should be checked before use, particularly with regard to mounting width, suspension, load capacity, and hydraulic connections. The attachment is in very good used condition, fully functional, and ready for operation. Fast and uncomplicated transport can be arranged upon request! This advertisement serves solely to identify the attachment. A detailed description of the condition and possible features is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. If you have not found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site. English SH Fork Positioner P1-ZVB 15 No.: R0813 Year of manufacture: 2014 Manufacturer: SH Anbaugeräte Type: P1-ZVB 15 Serial / part number: 2013-600385 Capacity: 1,500 kg Load center: 600 mm Center of gravity: 270 mm Lost load center: 200 mm Weight: 353 kg Design: hydraulic fork positioner Condition: ready for use and fully functional Visual condition: very good Technical condition: very good This attachment is a hydraulic fork positioner. The fork spacing can be conveniently adjusted hydraulically directly from the driver's position and adapted to the respective load. Due to the width of the mounting, this version is more commonly used on reach trucks. Compatibility with the respective forklift should be checked before use, particularly regarding mounting width, carriage connection, capacity and hydraulic connections. The attachment is in very good used condition, fully functional and ready for operation. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Chedpezii A Refx Ad Ijc Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Csdozimgajpfx Ad Ishc Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), Year of construction: 1989, Veneer press Manufacturer: Bürkle Type: U60 Year of manufacture: 1989 Plate dimensions: 2,200 x 1,250 mm Opening width: 400 mm Pressing pressure: 60 tons Specific pressing pressure: 2.2 kg/cm² Heating: Electric Motor power: 0.75 kW Emergency stop device: Emergency stop cable Weight: 3,000 kg Dimensions: 2,750 x 1,380 x 1,785 mm Chsdpfxjztnhmo Ad Ijc

Condition: used, Year of construction: 2013, number of controlled axis 6 STK workpiece weight 60 kg throat 820 mm weight of the machine ca. 0,665 t dimensions of the machine ca. 30 m³ The KR 60-3 industrial robot is a front-runner in its class thanks to its high flexibility and long reach with optimum load capacity. KUKA robot type: KR 60-3 Installation position: Floor Number of axes: 6 Maximum load of the robot: 60 kg Maximum reach: 2230 mm Repeatability: ± 0.06 mm Control system: KR C4 Weight approx. 665 kg Robot movement speed Axis 1: 128 °/s Axis 2: 102 °/s Axis 3: 128 °/s Axis 4: 260 °/s Axis 5: 245 °/s Axis 6: 322 °/s Axis range (in º) Axis 1: ±185 ° Axis 2: -135 ° / 35 ° Axis 3: -120 ° / 158 ° Cedpjzupmgofx Ad Iohc Axis 4: ±350 ° Axis 5: ±119 ° Axis 6: ±350 °

Condition: excellent (used), Year of construction: 2002, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg Chodpfx Adezvfluo Iec - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, Spindle moulder manufactured in 2008. This Colombo AM 60 features a robust design suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the Colombo AM 60 spindle moulder we have for sale. Contact us for further details. • Control: Computer / PLC-controlled • Display: 12" colour LCD-TFT • Interface: RS232 • Operating system: Windows • Saw unit – blade diameter: 400 mm • Saw spindle diameter: 30 mm • Saw blade speed: 3,000 rpm • Saw motor power: 3 kW • Tenoning spindle diameter: 50 mm • Effective spindle length: 600 mm • Max. tool diameter: 320 mm • Effective travel: 550 mm • 1st profiling spindle diameter: 50 mm • 1st profiling spindle effective length: 600 mm • 1st profiling spindle max. tool diameter: 200 mm • 1st profiling spindle speed: 6,000 rpm • 1st profiling spindle motor: 7.5 kW • 1st profiling spindle effective travel: 550 mm Codpfozvcqbsx Ad Ishc • 2nd profiling spindle diameter: 50 mm • 2nd profiling spindle effective length: 600 mm • 2nd profiling spindle max. tool diameter: 220 mm • 2nd profiling spindle speed: 6,000 rpm • 2nd profiling spindle motor: 2.2 kW • 2nd profiling spindle effective travel: 550 mm • Glass bead spindle diameter: 35 mm • Glass bead spindle effective length: 20 mm • Glass bead tool diameter: 200 mm • Glass bead spindle motor: 2.2 kW • Tape/feeding carriage speed: 1–80 m/min • Safety enclosure: Sound-insulated safety guarding

Condition: refurbished (used), functionality: fully functional, inspected and tested Cedpfxozvfarj Ad Ijhc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516309Y00331, Year of construction: 2021, operating hours: 7,593 h, load capacity: 3,500 kg, lifting height: 6,640 mm, free lift: 1,790 mm, fuel type: electric, mast type: triplex, fork length: 1,400 mm, TECHNICAL DETAILS Lifting height: 6,640 mm Free lift: 1,790 mm Lifting capacity: 3,500 kg Fork length: 1,400 mm Maximum fork width: 1,150 mm Minimum fork width: 240 mm Number of wheels: 4 MACHINE DETAILS Mast type: Triplex Drive: Electric Battery brand/type: 05 EPZS 0700 SC Battery year of manufacture: 2021 Battery capacity: 700 Ah Battery voltage: 80 V Battery tray length: 1,030 mm Battery tray width: 850 mm Battery tray height: 790 mm Operating hours: 7,593 h Dimensions & Weight Chedszuln Hspfx Ad Ijc Dimensions (L x W x H): 2,520 x 1,300 x 2,920 mm Unladen weight: 5,950 kg EQUIPMENT Side shift Non-marking tires Work lights User manual CE marking

Condition: used, Year of construction: 2006, operating hours: 6,714 h, machine/vehicle number: Z8006-1004, lifting height: 26,000 mm, color: other, Equipment: all wheel drive, Power internal combustion engine: 73 HP (54 kW) GVW: 16.870 kg Engine type: Deutz Diesel Mast: articulated arm Lifting capacity: 227 kg Working height: 2.577 cm CE mark: yes = GENIE Z-80/60 ARTICULATED 4x4 DIESEL BOOM LIFT W/JIB – 2006 = - 4x4 four-wheel drive - Articulated boom lift - Included JIB - Working height: 2577 cm - Platform height: 2377 cm - Horizontal outreach: 1829 cm - Up/Over clearance: 883 cm - Platform rotator: 160° - Vertical JIB rotation: 130° - Basket capacity: 227 kg - Diesel Deutz engine - Turntable rotation: 360° continuous - Empty weight: 17.489 kg - Overall width: 249 cm - Stowed height: 300 cm - Stowed length: 1127 cm - Gradeability: 45° - Serial number: Z8006-1004 - Year of manufacturing: 2006 - Hours on meter: +/- 6714 hrs - CE Certified See more pictures and product video on our website. Price is excluding VAT. Visit our website for more photos and a product video. Listed price is excluding VAT. We are open Monday to Friday from 07:30 to 18:00. Closed during weekends. Csdpfx Adewixqys Ishc All specifications, dimensions, and weights are approximate and subject to change without prior notice. Please note: the indicated hours may increase slightly, as this machine is part of our active rental fleet. Errors and omissions excepted.

Condition: new, Year of construction: 2025, Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2; max. speed of the machine in neutral: 60 cycles/minute; power: 220V, 2.6kW; compressed air: 0,2m³, 6bar; machine dimensions: L3000xW950xH1600mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Csdpfx Ajv Nkyujd Ijhc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, mileage: 10,636 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,330 kg, empty load weight: 700 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 11/2015, emission class: none, suspension: other, Year of construction: 2015, operating hours: 10,636 h, driver cabin: other, fuel: electricity, The Linde P 60 Z tow tractor is a powerful three-wheeled electric vehicle designed for efficient towing tasks in industrial environments. First registered on 23 November 2015, this used vehicle has accumulated 10,636 operating hours or kilometers to date. Its striking red design and robust technical specifications make this model stand out. Chjdpfswu Ig Uox Ad Ioc The tractor features a single seat, making it ideal for individual tasks in the logistics and transport sector. Its electric drive ensures environmentally friendly and cost-effective operation. The permissible total weight is 1,330 kg, allowing for solid transport operations. An inspection can be carried out without prior appointment. Further information and contact details can be found on the specified website. Sale to businesses only (agriculture, freelancers, small and large enterprises) or export. Errors and prior sale excepted.

Condition: used, mileage: 14,800 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,330 kg, empty load weight: 700 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 09/2017, emission class: none, suspension: other, Year of construction: 2017, driver cabin: other, fuel: electricity, Control unit defective! The Linde P 60 Z tow tractor is a versatile and powerful assistant for internal transport. With only 14,800 km on the odometer and first registration in September 2017, it offers an attractive combination of a modern model year and manageable mileage. The three-wheel design ensures high maneuverability and precise handling, making it ideal for warehouses, logistics and production areas. A reliable and practical tow tractor for companies that value efficient transport processes, compact dimensions and proven Linde quality. Chedpfxozdvwqs Ad Iec For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.