Used Automatic Glass Edge Grinding Machine for sale (77,195)

Year of construction: 2016, operating hours: 16,568 h, condition: used, machine/vehicle number: 84037, Travel ranges (X/Y/Z): 800x500x400 mm, weight: 5,300 kg, with magnetic clamping plate, approximately 80x40 cm. Bedpfxjzhaz Ie Altedd

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Point thinning device Dressing attachment Bdodsgy Ti Depfx Altjd MARCELS MASCHINEN CH

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Bdodpfx Alexy Tm Ioted

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons Bdjdpoym Tuaefx Alted

Condition: excellent (used), With DRO With internal grinding attachement Center height 240 mm Distance between centers 2500 mm Grinding wheel 700 x 200 x 305 Bdsdjzhmfyopfx Altod Grinding wheel speeds 890 / 1'120 rpm Workpiece spindle head 90° rotation Taper in tailstock MK5 Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), Grinding range 650x450x325mm Table size 600x350mm Magnetic plate 600x400mm Size of grinding wheel diameter x width x bore 400 x 80 x 127 mm Grinding wheel speeds 1400 / 2800 rpm Misc. accessories Bdjdpfx Ajzhl Rnjltsd MARCELS MASCHINEN CH

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Bdodpfswka N Tsx Altjd Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Bdjdoyulfajpfx Altjd Table size: 750 x 300 mm Abrasive belt dimensions: 2600 x 150 mm Belt back panel: 850 x 200 mm Belt speed: 20 m/sec. Table stroke up to 200 mm Motor: 3.0 kW Oscillation motor: 0.25 kW Extraction connection: 100 mm Oscillation drive with geared motor Height-adjustable cast iron table with double column guide Sanding unit infinitely tiltable up to 45° Dimensions (LxWxH): approx. 1720 x 760 x 1160 mm Net weight: approx. 180 kg Availability: short notice Warehouse location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Bodpfx Aew Tfw Holtjdd Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min. Bdedpfewka Tljx Alted Power consumption approx. 11 kW With heated infeed fence With quick-heating glue pot Pneumatic roller end trimming up to 3 mm With cross-cut saw for edge thicknesses up to 5 mm Milling station optionally equipped with combination indexable insert cutters for radius, straight, and chamfer milling Outrigger, foldable and extendable to the front With undercarriage With integrated extraction system Dimensions (L x W x H): 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm Bdedpfx Alswkba Tjted - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Bdjdow I U Drspfx Altjd Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Bjdpfx Alew I U E Ajtjdd Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Bsdpfxewka H Sj Altsdd Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm Bdedowka S Iopfx Altsd - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Single-side edge sanding machine Manual conversion from solid wood to veneer sanding Patented device with foldable stops With sanding belt oscillation Manual tilting of the sanding unit 0-45° by scale Motor: 2.2 kW Oscillation stroke: 5 mm Work table: 400 x 1100 mm Bsdpex Rv Dysfx Altedd Sanding belt width: 150 mm Extraction connection: 100 mm Footprint: 600 x 1080 mm Weight: approx. 400 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim Bsdpfsvymdqox Altsdd

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Bdjdpfow Nadgex Altod Gluing, max. 8 - 55 mm Incl. rotating control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. program-controlled chamfering, radius and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. surface pull blade Incl. grooving unit Incl. edge trimming unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1991, Used machine Used profile sanding machine of the company Arminius type ST 10 Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Bsdpjw I Unksfx Altjdd Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Location: Röllbach

Condition: used, Year of construction: 2009, Used machine Bdodpfx Alsv R Nk Uetjd Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down Bsdpfxjwkbcbj Altjdd - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Bodpjw I H Rkefx Altjdd Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar Bdedpozc Agksfx Alted - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 for pre-coated edge material Edge material up to 1.3 mm with roller guillotining Bedpoxc Rl Hefx Altsdd with flush trimming with knife with top/bottom flush and bevel milling with HF motors Location: Röllbach Availability: short term

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 12/2022 Features and technical data: DESCRIPTION • Grinding unit tiltable by hand crank • The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results • Oscillation can be switched on or off as needed • Sanding platen with graphite coating for longer belt life • Height-adjustable sanding table to utilize the entire belt width • Auxiliary table for sanding radii with integrated extraction ports • Sleeve sanding device with attachable work table • Spring-loaded belt tension automatically compensates for belt length differences • Equipped with adjustable stops, ideal for veneer sanding • Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Product length approx. 1700 mm Product width/depth approx. 1000 mm Product height approx. 1150 mm Net weight approx. 300 kg Drive power Oscillation motor power: 0.11 kW Extraction connection Extraction port diameter: 2 x 100 mm Bdjdow I Uvzepfx Altsd Work tables Table length: 950 mm Table width: 450 mm Table height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Tilt range of grinding unit: 0–45° SCOPE OF DELIVERY • 1x sanding belt K100 • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Standard tool kit • Mitre gauge Location: Hochheim Availability: Immediately