Used Anayak 1080 for sale (346)

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. Hjdpfx Ajpy Dxrsbajp With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions Hsdoyvhwiepfx Abasp - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: used, Year of construction: 2003, Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm Hsdpfjtug S Dox Abajp total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, Height 500 mm (top edge of rollers) Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm Hjdpfoxppnmsx Abasp SPINDLE: 11-15 kW; 221,5 Nm COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: +20 -50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW HIGH PRESSURE COOLANT: 25 Bar CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Condition: excellent (used), Year of construction: 2012, operating hours: 1,080 h, fuel type: electric, Year of manufacture: 2012 Drive: Wheel GVW: 3.075 kg Hodpfx Aboy S Up Rjasp Dimensions (LxBxH): 410 x 150 x 190 cm Mast: articulated arm Lifting capacity: 200 kg Working height: 1.220 cm Technical condition: very good Visual appearance: very good Manufacturer: Niftylift Type: HR12NE Year of manufacturing: 2012 Weight: 3075 KG Hourmeter: 1080 Drive: Electric, 4x2 Product number: 25073 Platform height: 10,20 m Working height: 12,20 m Platform measurements: 110x65 cm Maximum outreach: 6,10 m Total measurements LxWxH: 410x150x190 cm Max. platform load: 200 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 10.500,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, Technical details: Hedpfxju Icdys Abajp sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: used, Year of construction: 2018, functionality: fully functional, - Year of manufacture: 2018 - Fully operational - Made in Poland - Operating manual, CE certificate included TECHNICAL SPECIFICATIONS: - Four drilling units - Suitable for drilling both long and short components - First drilling unit: five drills - Second drilling unit: five drills - Third drilling unit: five drills - Fourth drilling unit: six drills - Adjustable drilling units, right and left - Three horizontal pneumatic clamps Hodpfx Ajw Iqdzjbasp - Three vertical pneumatic clamps - One centering pneumatic clamp - Motor rotation (right): 3000 rpm - Motor power: 5 kW - Spindle stroke: approx. 160 mm - Table height – working level: approx. 1000–1080 mm - Rated voltage: 3x400 V - Air pressure: 6 bar - Air consumption: 10 Nm3/h / 2m3/h Dimensions: - Length: 2300 mm - Width: 1700 mm - Height: 1500 mm - Weight: 750 kg

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Hodpfx Abovbqv Hsasp Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: used, machine/vehicle number: 3045, turning diameter over bed:870 mm turning diameter over slide rest:520 mm Hedpfxocxxmio Abaop turning length:2100 mm turning diameter in the pit:1080 mm lenght of the pit:430 mm turning speeds:24 turning speed range:8 - 1000 U/min spindle bore:103 mm x-axis:x = 1830, x² = 160 mm y-axis:415 mm longitudinal feeds::104 feed::0,1 - 61,6 mm/U feed::0,0038 - 2 19/64 Zoll/U face feeds:104 face slide feeds::0,3 - 18,4 mm/U face feeds:0,0012 - 47/64 Zoll/U thread pitch -number:72 Stück thread - mm pitch:0,5 - 240 mm thread - inch:60 - 1/8 inch. thread - module:0,125 - 60 mm face slide travel:450 mm upper slide:160 mm rapid traverse longitudinal:5140 mm/min rapid traverse cross:2570 mm/min tailstock adjustment out of the central pos.:10 mm quill::Morse 6 quill stroke:280 mm frequency:50 Hz voltage:380 V control voltage:220 v rated current:Sicherung: 50 A rated current:30 A total power requirement:13 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:4,1x1,5x1,9 m

Condition: good (used), Code: 0299 Brand: SCM Hsdpfsyi E T Tex Abajp Model: S 630/E - CE Standard Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Min/max working height 3/300 mm Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000

Condition: good (used), Code: 0372 Brand: CASOLIN Model: TOP 530 Automatic thickness planer for wood, joinery, furniture, customer-made furniture, wooden joinery, doors, panels, timber framing, sawmills, plastics, composite materials and various Features: Cast iron work table supported by 4 ground columns with inner rise screw syncronously which guarantees the greates rigidity, the work surface of thicknessing table, worked with a particular processing, guarantees excellent performance of guidance and sliding of the workpiece Automatic locking of thicknessing table Shaft with 4 replaceable cutters ‘TERSA’ Rear pressure roller adjustable to 3 positions Steel feed rollers Technical data: Max working width 530 mm Work table dimensions 530 x 1060 mm Max working height 300 mm Min working height 3 mm Useful thickness 8 mm Hedpsy Hvudefx Abasp N° 4 replaceable cutters ‘TERSA’ Shaft rotation speed 5000 rpm Feed speed 4-7-11-17 mt/min Main motor 5,5 Hp Automatic table lift Suction inlet diameter 160 mm Overall dimensions mm 960 x 1080 x 1100 h Weight kg 970

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Type: TPS 118 Logistics Semi-Trailer Chassis: Central Axle Trailer Outer frame slightly inclined, new design with "Load-Lock profile" for securing tie-down straps 2-speed gear support leg at the front Plastic toolbox Platform height: 1080 mm Coupling: Central axle trailer Drawbar with tested 40 mm drawbar eye, logistics version Drawbar mechanically adjustable in height via threaded spindle, below floor level, max. adjustment range 200 mm Drawbar mechanically adjustable in length from approx. 1950 - 2300 mm, can be mechanically locked at approx. 50 mm intervals, drawbar length set to approx. 2100 mm Axles & Suspension SAF/BPW axles, selectable by the manufacturer "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking System 2-line pneumatic braking system Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle 24 Volt EBS, electronic braking system with EBS plug at the front, with connection cable with raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 4x 235/75 R17.5, brand selectable by the manufacturer Hedjzcp E Tspfx Abaop 4x steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length: approx. 7,300 mm Superstructure Front wall / corner posts at the front Through-loading system with front portal doors, 2-leaf, each with 2 internal rotary bolt locks, corner posts made of steel, release mechanism for side tarpaulin Ramp, approx. 2,400 mm wide, 1 x divided, approx. 350 mm long for resting on the tailgate, load capacity approx. 1,800 kg, incl. support for the tailgate (drawbar length then approx. 2100 mm, for tailgate length of 1800 mm, the coupling offset from the truck must be at least 20 to max. 240 mm). Note! Usable internal length is reduced by the ramp! Side Walls Center Rails 2 pairs of sliding rails that can be moved along the entire length, with 4 pockets and a long pocket at the bottom Insert strips 5 rows of wooden insert strips (in combination with side walls, 4 rows) Rear Wall / Corner Posts at the Rear Corner posts at the rear made of steel, extending to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf, each with 2 internal rotary bolt locks Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning fasteners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Sliding tarpaulin, rear end lift that can be folded up, with the tarpaulin sliding from back to front, tarpaulin color: white Optimal rain gutter at the rear, above at the end beam, above the doors Country of Registration / License Plates Germany with Dekra approval and certificate (according to §13 EG - FGV) Fliegl manufacturer certificate for the structural strength of the superstructure according to EN 12642 XL prepared for single-line license plate holder Reflective strips: white, continuous on the bottom of the side tarpaulin and at the top in the corners Reflective strip

Condition: new, Year of construction: 2025, The Senfeng NT series profile lasers is a profile laser with 3 jaw plates and a horizontal machine frame. Suitable for medium to large production requirements with light to medium industrial requirements. Hjdpfx Asvvh Tlsbasp The NT series can be extensively equipped with loading and unloading systems and can be equipped with up to a 6 kilowatt laser source. Because the NT series is equipped with a 3rd jaw plate, you can achieve up to 0 mm tailing and high accuracy when processing longer length profiles. With Senfeng we offer fiber lasers at a competitive price with service from our own mechanics. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install this with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. Technical data: - Laser Wave length: 1020 nm – 1080 nm - Maximum tube length: from 3200 - 15200 mm - Maximum profile weight: 700 kg - Tube cutting capacity: Ø 10 - 350 mm - Tube cutting capacity: 10x10 - 350x350 mm - Speed of rotation of the chucks: Depending on the size of the chucks - Speed of the axes: Depending on the size of the chucks - Operating voltage: 400V / 50Hz ± 5% - Tailing (residual material): 0 mm - Cutting gases: Oxygen, Compressed air, Nitrogen ===== In addition, the machine is equipped with the following options: - Control: TubePRO - Follow-up supports controlled by a ball screw. This means that unequal profiles are continuously supported and you can process material more accurately - Valve for collecting small pieces. This is opened and closed in the control with an air cylinder - Pneumatic jaw plates, for fast and precise clamping - Various automations possible - Aviation aluminum beam - Cutting head: Depending on the power - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer - Automatic lubrication unit

Condition: good (used), TECHNICAL INFORMATION: Hjdpforpnf Rox Abaop Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm Regulating wheel dimensions (od x id x width): Ø304.8xØ152.4x204 mm Manual plongeé Main engine power: 20 Kw Voltage: 380 V Height: 1700 mm Length: 2000 mm Width: 1080 mm Weight: 4315Kg approx. machine + 60 Kg drawer

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Hedpfx Abou Awaleasp Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Year of construction: 2016, condition: ready for operation (used), This SCHMIDT Electric Press 343 was manufactured in 2016. It features a stroke of 100 mm, tool dimensions of 150 x 100 mm, and a maximum speed of 150 mm/s. The press force monitoring and two-hand operation ensure safety and precision. Ideal for tasks requiring up to 2.5 kN pressing force with a maximum of 4 kN. The machine is in very good condition, almost like new. Contact us for more information about this machine. Additional information • Condition: Very good, almost like new • Features: • Press force monitoring • Two-hand operation • Electronic rack and pinion drive • Sensors for force and displacement measurement • Press force: 0.5 tons, 2.5 kN at 100% duty cycle, 4 kN max • Stroke: 100 mm • Max speed: 150 mm/s • Tool dimensions: 150 x 100 mm • Pam stroke: 0-100 mm • Pam speed: 200 mm/s max Hsdpfox D Ncaox Abaep • Working height: 1080 mm • The machine operates reliably via safe two-hand control and has only been used for testing purposes.

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 3,500 kg, fork length: 1,100 mm, Fork positioner Condition: Ready for use and fully functional Technical condition: good Description: Year 2016, sideshift, capacity 2000 kg, opening range 400-1080 mm, width 100 mm, forks 1100 mm, MOUNTING: Linde STANDARD 393, inside 317 mm, outside 380 mm, length 690 mm, ID OS1596 Hsdpfx Abjw Egmbeasp

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch Hsdjy Twfqopfx Abasp - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: used, machine/vehicle number: 25287, Year of construction: 2017, operating hours: 14,720 h, load capacity: 1,600 kg, lifting height: 3,140 mm, free lift: 1,470 mm, fuel type: gas, mast type: duplex, construction height: 2,130 mm, Equipment: sideshift, .: 25287 Device details: Year of manufacture: 2017 Load capacity: 1600 kg Lifting height: 3140 mm Read operating hours: 14720 h Free lift: 1470 mm Mast type: Duplex Mast height: 2130 mm Length/Width/Height: 2230 / 1080 / 2120 mm Operating weight: 2855 kg ---- Equipment: * Non-marking tires * Non-marking tires * Protective roof * 3rd valve * Roof cover * Full free lift ----- Attachments: * Sideshift * Load backrest ---- Additional device information: Bluespot Flashing beacon Seat heating Extra roof protective grid ---- The operating hours are generally read off the display. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments and sweepers immediately available for you. Of course, also for rent! Hjdpfotw Daujx Abajp We are happy to buy your OLD one. Do you have questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to seeing you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer transactions, the device is sold as is, not reconditioned. All information without guarantee, errors and changes reserved.

Condition: new, machine/vehicle number: 9088, Year of construction: 2024, operating hours: 1 h, load capacity: 1,750 kg, lifting height: 6,000 mm, free lift: 2,100 mm, fuel type: gas, mast type: triplex, construction height: 2,720 mm, Equipment: sideshift, Manufacturer warranty 12 months or 1000 operating hours. .: 9088 Device details: Year of manufacture: 2024 Load capacity: 1750 kg Lift height: 6000 mm Read operating hours: 1 h Free lift: 2100 mm Mast type: Triplex Mast height: 2720 mm Length/Width/Height: 2300 / 1080 / 2210 mm Operating weight: 2850 kg ---- Equipment: * Protective roof * 3rd valve * Front work lights ----- Attachments: * Side shifter * Load backrest ---- Hodpfx Aotw Al Nebaop Further device information: ---- In general, the operating hours are read from the device. We are happy to offer the suitable transport for you. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as is, not reconditioned. All information without guarantee, errors and changes reserved.

Condition: new, machine/vehicle number: 9087, Year of construction: 2024, operating hours: 1 h, load capacity: 1,750 kg, lifting height: 4,500 mm, free lift: 1,370 mm, fuel type: gas, mast type: triplex, construction height: 2,210 mm, Equipment: sideshift, strong warranty 12 months or 1000 operating hours. .: 9087 Device details: Year of manufacture: 2024 Load capacity: 1750 kg Lift height: 4500 mm Read operating hours: 1 h Free lift: 1370 mm Mast type: Triplex Mast height: 2120 mm Length/Width/Height: 2300 / 1080 / 2210 mm Operating weight: 2760 kg ---- Equipment: * Protective roof * 3rd valve * Work lights front ----- Attachments: Hsdpfxjtw Alve Abasp * Sideshift * Load guard ---- More device information: ---- Operating hours are always counted as read hours. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments and sweepers immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 a.m. to 4:00 p.m. you can reach us. We look forward to hearing from you! We speak English Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as is, not reconditioned. All details without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 25168, Year of construction: 2018, operating hours: 18,892 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,450 mm, fuel type: gas, mast type: triplex, construction height: 2,130 mm, Equipment: sideshift, .: 25168 Device details: Year of manufacture: 2018 Load capacity: 1600 kg Lifting height: 4620 mm Read operating hours: 18892 h Free lift: 1450 mm Mast type: Triplex Mast height: 2130 mm Length/Width/Height: 2210 / 1080 / 2110 mm Operating weight: 2870 kg ---- Equipment: * Protective roof * 3rd valve * Work light front * Work light rear ----- Attachments: * Sideshift ---- Further device information: ---- Operating hours are generally read values. We are happy to offer you suitable transport. Another 250 – 300 forklifts, attachments, and sweepers available immediately for you. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! Hodpfx Abotw A Nheasp We speak English. Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as-is, not refurbished. All details without guarantee, errors and changes reserved.

Condition: used, machine/vehicle number: 25291, Year of construction: 2016, operating hours: 10,173 h, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,480 mm, fuel type: gas, mast type: triplex, construction height: 2,120 mm, Equipment: sideshift, .: 25291 Device details: Year of manufacture: 2016 Load capacity: 1600 kg Lifting height: 4620 mm Operating hours read: 10173 h Free lift: 1480 mm Mast type: Triplex Mast height: 2120 mm Length/width/height: 2230 / 1080 / 2120 mm Operating weight: 2960 kg ---- Equipment: * Non-marking tires * Protective roof * 3rd valve * Windscreen * Roof cover * Full free lift * Front work lights * Rear work lights ----- Attachments: * Side shift ---- Other device information: ---- The operating hours are generally hours read. We would be happy to offer you the right transport. Another 250 - 300 forklifts, attachments and sweepers available for you immediately. Also available for rent, of course! We would be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! Hsdpfxotw A U Ro Abaop We speak English Prior sale and errors in this offer are expressly reserved. In the dealer's shop, the device is sold in its current condition, not refurbished. All information is provided without guarantee, errors and changes reserved.

Condition: used, Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 5,000 rpm, SPINDLE TAPER ISO 50 X LONG. TRAVEL MM.6000 Hedpfewz H Rfox Abaep Z SADDLE TRAVEL MM.1250 Y VERTICAL TRAVEL MM.2000 SPINDLE SPEED RPM.5000 FEEDS MM/MIN.8000 SPINDLE MOTOR POWER KW. 37 CNC HEIDENHAIN iTNC 530 REMOTE HAND WEEL FLOOR PLATES 7000x2000- 15 TON/MQ. TABLE 1080 X 7220 X H 820 MM ATC.40 CHIP CONVEYOR ROTATING HEAD IN CONTINUOUS TUPC 0,001°x0,001° COOLANT THROUGH THE SPINDLE 20bar FUNCTION RTCP FPT AUTOCAL EXTERNAL COOLANT TANK HEIGH & LOW PRESSURE WITH PAPER FILTER N.2 AUTOMATIC HORIZONTAL DIVIDERS WITH 2 SUPPORT TABLES N.1 PIECE PROBE

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 1125 mm stroke 250 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1100 x 900 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 100 mm die cushion area 700 x 400 mm table height over floor 960 mm side window 700 mm Hedpfoyx Il Esx Abasp ram surface 1080 x 900 mm oil volume 1000 l power requirement 35,0 kW weight 23,0 t Dimensions (WxDxH) 2,5 x 2,3 x 4,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick), hydraulic drawing cushion in table, cutting impact cushioning No foundation pit necessary