Used 200 Litre Bowl Cutter. for sale (19,357)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 2,000 mm, filling opening length: 1,020 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, year of last overhaul: 2026, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational Bodpfey Uruvex Ammsdc • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, twin shaft paddle mixer Bdsdpsy Sz Imjfx Ammec mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: new, new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc. Bdsdpsy Sz Iasfx Ammsc

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, hydraulic flat cylinders Bodpfxewxtw Tj Ammjdc -Manufacturer: FAG, single-acting light alloy cylinder with spring return, stroke 210 mm -Type designation: LZM 25/200 PN500 8607 -Stamp diameter: 63 mm -Lifting capacity: 25 t -Pressure range: max. 500 bar -Dimensions: 140/110/H365 mm -Weight: 12 kg

Condition: excellent (used), The system is suitable for conveying, loosening, and gently mixing bulk materials, granules, powders, or similar materials. The special screw geometry with mixing/paddle sections not only transports the material but also moves and mixes it during the conveying process. Technical data: * Manufacturer: Waeschle / Wäschle Bedpfxszabrms Ammodc * Type: DST 200 * Year of manufacture: 2001 * Screw diameter: approx. 200 mm * Motor power: 2.2 kW * Design: Stainless steel * Function: Conveying, loosening, mixing * Immediately available from stock

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 Bodsgabu Uepfx Ammsdc with counterholder and base plate.

Condition: used, machine/vehicle number: 008628, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 80 mm Bjdpfxszakc Ue Ammodc No of Grippers: 6

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. In stock and immediately available. Specifications: Material Grade: 316L Stainless Steel Bodpfx Ajyh I Tqjmmjdc Dimensions: 1110mm diameter X 1230mm straight side

Condition: excellent (used), LDS Dactron COMET USB Shaker Control System Type: COM 200 Manufacturer: Brüel & Kjaer / LDS Dactron For sale is a used LDS Dactron COMET USB Shaker Control System, Type COM 200, for controlling electrodynamic vibration testing systems. The system is suitable for random, sine, and shock tests in laboratories, industrial settings, automotive applications, as well as research and development. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Data 2-channel shaker control system USB interface Supply voltage: 100 – 240 V Frequency: 47 – 63 Hz Current consumption: 0.5 A Suitable for: Random tests Swept sine tests Shock tests Electrodynamic vibration testing systems Software / Functions Installed software according to system display: Shaker Control Version 8.1001 Library Version 6.3120 Unlocked module: Value Swept Sine Activated option: Real Time Data Exchange Connections USB port BNC connectors Power connection Further connections, see images Calibration Calibration data according to label: Calibration Date: 2010-09-21 Due Date: 2011-09-21 The calibration has expired. A new calibration can be performed by the buyer if required. Condition Used equipment from an industrial application. Optical condition, see images. Normal signs of use and storage are present. The device was switched on. The indicator light and software display are active. Further functional or calibration tests have not been performed. Scope of delivery LDS Dactron COMET USB COM 200 controller Power cable / connection cable according to images Accessories according to images Scope of delivery includes only the items shown in the images. Notes Bedpfxjy Ugrps Ammsdc Inspection possible by arrangement. Loading and shipping possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. Bsdpfx Aoxawctsmmsdc This is an exchange spindle, which means a used part is required in return. If you have any further questions, we are happy to assist you.

Condition: ready for operation (used), 40 mm x 40mm x20 mm cutting €3 each Bjdpfxeyhnqlo Ammjdc

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light Bjdpfowp Eblox Ammjdc saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Condition: good (used), Year of construction: 1980, Joint cutter, diesel joint cutter, asphalt cutter Bjdpfxsb A Hv Ds Ammodc -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Condition: used, Year of construction: 2016, Type: KMRS-200 Serial number: 17508-001 Year of construction: 2016 Capacity: 700 pc/h Belt width: 325 mm Bdodpfx Ameypbzajmsc Diameter cutting ring: 270 mm CIP unit: hot water min. 60 degrees Celsius Compressed air: 5 Bar, 3.5 Nm³/h Power: 3 x 400V, 50Hz, 2kW Dimensions: 1600 x 1150 x 1500 mm

Condition: used, Year of construction: 2022, Manufacturer: NOMA Nowicki Model: Typhoon KN-60 Year: 2022 Condition: Used Bsdpfx Amjy Th Uiemodc Serial number: 5202220 Stock number: 3374 Bowl: 60 liters Bowl speed: variable speed, 2 - 15 RPM Knives: variable speed, 200 - 6000 RPM Mixing: 2 mixing speeds, reverse Power: 3 x 400V, 50Hz, 21kW Dimensions: 1100 x 1600 x 1200 mm Weight: 1325 kg Equipped with a temperature indicator and a central lubrication system.

Condition: used, axle configuration: 3 axles, first registration: 06/2019, total length: 13,420 mm, total width: 2,460 mm, total height: 2,600 mm, suspension: air, tire size: 385/65/22.5, color: other, Year of construction: 2019, Equipment: ABS, = Additional Options and Accessories = - Box container - Rear doors - Air suspension = Additional Information = Axle configuration Tire size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Weights Unladen weight: 9,916 kg Bedpfxszakzkj Ammedc Payload: 29,084 kg GVWR: 39,000 kg Functional Body brand: THERMO KING SLXI200 Refrigeration unit: Diesel and electric (7956 operating hours diesel; 345 electric) Condition Damage: None Identification License plate: QAJK338

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Bdodpfx Ameu R S Ersmec Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: ready for operation (used), Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Bjdpfx Amjx Erpnomjdc

Condition: not inspected (used), functionality: unexamined, overall weight: 70 kg, total length: 1,800 mm, total width: 900 mm, total height: 150 mm, drive type: motorgetrieben, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe, between June 23, 2026, and June 26, 2026! TECHNICAL DETAILS Operating type: Motor-driven Bdedey D Nkajpfx Ammec MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 900 x 150 mm Weight: 7 kg External reference: 4

Condition: used, Year of construction: 2023, operating hours: 725 h, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 10.050 kg Mast: articulated arm Bjdpfx Amoy Rw E Ssmjdc Lifting capacity: 230 kg Working height: 2.000 cm Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2023, operating hours: 675 h, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 10.050 kg Mast: articulated arm Lifting capacity: 230 kg Bodpfx Amey Rw Iasmedc Working height: 2.000 cm Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2016, operating hours: 3,950 h, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Mast: articulated arm Lifting capacity: 230 kg Working height: 2.028 cm Max. horizontal reach: 1200 m Rental currency: EUR Please contact Bart Matthijs for more information Bdedpfx Aexzapxjmmec

Condition: new, Year of construction: 2024, operating hours: 75 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 7.530 kg Mast: articulated arm Lifting capacity: 250 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Bsdpfewux Ebjx Ammjdc

Condition: excellent (used), Brüel & Kjaer LDS Dactron Laser USB LAS 200 Type: LAS 200 LDS Dactron Vibration Testing and Shaker Control System including Acer laptop with installed software For sale is a used LDS Dactron LASER USB Shaker Control System, Type LAS 200. The system was last used in an industrial vibration testing facility and is suitable for electrodynamic shaker systems, vibration tests, resonance tests, random tests, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjær Type: LASER USB Model: LAS 200 Made in U.S.A. Software / Functions Installed software: Shaker Control Version 8.1001 Library Version 6.3120 Activated modules according to software display: Random Sine on Random Random on Random Bdjdpfxjy T Iv He Ammec Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Further activated options: Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Technical Data 8 active input channels 2 output channels Sampling Rate: 96 kHz A/D Resolution: 24 Bit USB Mode: 2.0 Input Type: Volt / ICP / TEDS Suitable for electrodynamic vibration testing systems and industrial shaker systems. Calibration Calibration data according to system display: Last calibration: 09/20/2023 Displayed due date: 09/19/2024 Dimensions / Weight Controller approx.: 430 x 350 x 90 mm (W x D x H) Controller weight: approx. 6 - 8 kg Scope of supply LDS Dactron LASER USB Controller Acer laptop with installed software Connection cables / accessories as shown in the pictures Condition Used equipment from industrial use. Optical condition see pictures. Normal signs of wear and tear and storage. System starts, software can be opened and the hardware has been recognized. No further tests were performed. Notes Sale exclusively to commercial customers. No guarantee or warranty. Subject to prior sale, errors and changes. We will be happy to answer any further questions by telephone or message.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, input frequency: 50 Hz, type of input current: three-phase, Universal Mixer – Fortschritt Universal machine Mixer, Type 15 Bowl capacity approximately 15 liters With 180° tilting function Bodpfoyunk Ejx Ammjdc DGUV V3 certified – available only from us Connection: 400V, 16A CEE plug Used machine We have other machines in stock!