Used 1500L 1.4435 Pharmaceutical Process Vessel for sale (21,369)

Condition: good (used), Cleveland KGL40 kettle Stainless, 40gallon, jacketed cooking kettle, adjustable temperature controls, steam jacketed, 1Ph Laedpfjrywtusx Ampea

Condition: good (used), Year of construction: 1994, Short/ Nest Line Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer 5. Extruder Lsdpfoh Dxgzjx Ampeaa 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product 12. Comand pult 13. El Cabinetsž NOTE - Action price - 30.000 EUR

Condition: not inspected (used), Year of construction: 2008, operating hours: 32,164 h, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item between 23/03/2026 and 27/03/2026! The machine is also equipped with a cutting function (see pictures)! TECHNICAL DETAILS Maximum tensile strength stainless steel: 600 N/mm² Sheet thickness stainless steel: 0.5 mm – 1.25 mm Typical sheet thickness stainless steel: 1.0 mm Maximum tensile strength steel: 410 N/mm² Laedpfx Ameycqucspja Sheet thickness steel: 0.5 mm – 2.0 mm Typical sheet thickness steel: 1.5 mm Maximum tensile strength aluminium: 265 N/mm² Sheet thickness aluminium: 0.5 mm – 3.0 mm Typical sheet thickness aluminium: 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Maximum diagonal: 2,800 mm Maximum centering dimension: 2,500 mm MACHINE DETAILS Hydraulic System Base machine oil capacity: approx. 500 dm³ Shear lift table oil capacity: approx. 20 dm³ Cooling System (Closed) Cooling unit R81: approx. 175 liters Cooling unit R101: approx. 260 liters Service Connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross-section: 4 × 25 mm² Pre-fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supply units: 220 V AC Open Cooling System Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed Air Required pressure: 6 – 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Dimensions & Weight Required space (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Up to approx. 3,000 mm Total weight (without oil): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot has been modified for use with a magnetic lifter SCOPE OF DELIVERY Available manuals Various spare parts in wooden crates

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Due to a change in production, we are selling our still very new Fessmann Smoke/Cooking Unit T3000, oil-heated Year of manufacture: 2022 Internal dimensions (Stock size): 100 cm Trolley size: 198x104x102 cm Control system: FoodCon.2 Touch 12" Incl. cooling register and 3.3 kW refrigeration unit Automatic pneumatic door opener Voltage: 400V Front door hinge left Smoke inlet: top >> All technical details and description are attached. The complete system package from 2022 consists of the following components: >> incl. matching friction smoke generator: RR325 M Suitable for beech/oak/spruce wood >> incl. matching cold dryer from Beko, model DPRA50 >> incl. suitable 3.3 kW refrigeration unit for outdoor installation Lodpfsyycgysx Ampoaa The unit is available from 01.04.26. Original price complete system incl. refrigeration unit, cold dryer, and friction smoke generator: approx. €85,000 Dismantling and provision of a forklift for loading can be carried out by the seller. Organization of transport is the responsibility of the buyer. The system is fully functional and in perfect technical condition. The unit can (currently) be inspected while in operation. ..... An official invoice with VAT shown will be issued. Price is net, plus VAT. Sale is exclusively to businesses within the meaning of § 14 BGB, excluding any liability for material defects. No warranty is provided. Sale as inspected/as seen.

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Laodswunwyjpfx Ampoa Detailed technical description available upon request!

Condition: excellent (used), Flake ice machine on stand, can produce up to 3.2 tonnes per day of flake ice. Lovely condition. 3 in stock. Lajdjh Nnd Rjpfx Ampsa

Condition: excellent (used), Year of construction: 2018, Source Technology PowerHeater and FlexiCut machines. Direct from meat-free facility, used for making vegetarian 'chicken style' products. In excellent condition and rarely available for sale as used machines. New price of these machines is £750,000 Lasdpfx Amst Rh T Dspsa

Condition: refurbished (used), functionality: fully functional, Angle automatic grinder Laska WW-130/2 - Hopper capacity approx. 300 liters - 2 x working screw and feed screw speed - Foldable hopper - electrically locked - Push-button control - Contactor control - Built-in control cabinet - Maximum output approx. 4,000 kg/h - Power 16 kW / 32 A / 400 V / 50 Hz with thermal overload protection Lodpsywnzwefx Ampsaa - Cutting set: New - stainless steel (inox) - Machine completely reconditioned in 2026 !!! Condition as new !!! Machine made of stainless steel, completely overhauled - as new condition!!! Option: Mast lift for 200 liter standard trolley, stainless steel. Separation device with separator knife, separator disk & drainage hose, stainless steel. - Subject to prior sale -

Condition: used, Year of construction: 1996, functionality: fully functional, We are offering this used Finnpower TP2020BIF2/AM sheet metal processing center, year of manufacture 1996, fully operational and ready for use. The machine is currently still in full operation and will soon be replaced. Lasdpfoyzfh Njx Ampea Manufacturer: Finnpower Model: TP2020BIF2/AM Year of manufacture: 1996 If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2016, condition: used, Manufacturer : STAES Model : VC HICA Type : Process tank Year: 2016 Circulation / mixing pump : SPX W+ 50/8 160 STD Material : stainless steel Tank / Vessel Volume: 200 L Operating pressure: Atmospheric Temperature : -10 °C to +100 °C   Jacketed Lsdpfx Ameykcayepsaa Volume : 5,6 L Operating pressure : 0 / 3 bar Temperature : -10 °C to +100 °C jacket pressure drop : 0,2 bar

Condition: excellent (used), functionality: fully functional, total length: 1,700 mm, total width: 900 mm, total height: 1,500 mm, Wolfking C-160 UNI Grinder capacty up to 6000 kg / hour 160 mm hole plates Ledsyvimlepfx Ampoaa Very strong and reliable grinder for long life time.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Serial number -  1213255 ✅ Date of manufacture - 1992 ✅ Rating 500-000 General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. Ledpsxb Alvsfx Ampsaa ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview Laodpfx Aoydh Agjmpja The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Year of construction: 2019, condition: good (used), functionality: fully functional, The Labu Three-Vessel-Brewhouse is entirely made of stainless steel and consists of: Cooker, Lauter tun, Whirlpool and Electronic controls. Ledpfxoup Ez As Ampeaa The design of the Labu Three-Vessel-Brewhouse facilitates the parallel and nearly simultaneous production of two brews. Because of this double-batch principle, the space requirements, connected wattage and the acquisition costs are lower than those of conventional systems. A double-batch can even consist of different beer types, because the two brews are processed independently. For more information and a detailed description of the double-batch brewing process, please refer to the site of labu.

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Manufacturer: Stork Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good Lodpfx Amowdibxopoaa

Condition: excellent (used), Year of construction: 2020, The intestine/gall-bladder remover is part of the evisceration process, installed immediately behind a Nuova evisceration system or a veterinary inspection station, depending on local veterinary regulations. A viscera shackle transports the viscera pack through this remover. The machine is in very good condition and was manufactured in 2020 Laodpewdiazofx Ampja Iajbtt Shdjtv E D Aefer

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Ijbtt Shev Avvuedfjar Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Width (Z2): 3092 mm Laodewdidmspfx Ampsa Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Lajdpewdic Aefx Ampea Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Shackle pitch: 6" Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Iebttsv Au Nge Shdfoar Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: used, Suhner Needle Injector Model: S120F- 45 Lodpfx Ameygxrdepoaa With filter Ex fish factory, last used on salmon

Year of construction: 2005, condition: ready for operation (used), Three cable processing machines from a complete extrusion line are available. 1) Spindle pay-off Ka-Be-Ma AS400, spool flange diameter range: 140mm-400mm, min. core diameter: 90mm, max. spool width: 300mm, max. spool weight: 50kg, conductor diameter range: 0.1mm-1mm, max. pay-off speed: 600m/min, tensile force: 0.5N-20N, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 1000kg. 2) Cooling section Ka-Be-Ma T-KW-UKW-A-1,5, Zone 1: Process: immersion cooling, temperature range: 70°C-80°C, length: 2000mm. Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C. 3) Dual take-up Ka-Be-Ma DWST400-1, spool flange diameter range: 305mm-400mm, min. core diameter: 156mm, max. spool width: 282mm, conductor diameter range: 0.1mm-1mm, speed: 600m/min, tensile force range: 0.5N-1.5N, max. spool weight: 80kg, machine dimensions X/Y/Z: approx. 1200mm/1550mm/1450mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Lajdjyxq Upepfx Ampea

Condition: good (used), functionality: fully functional, input voltage: 380 V, PSV sausage stuffer. 25 liters. 380V. Lsdsytxhropfx Ampoaa

Condition: good (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 781921, For sale is a used mixer (paddle mixer) with a lifting tipper for standard trolleys from April 2022, in very good condition. This mixer was used for approximately 10 hours in April 2022 and has not been used since. The manufacturer is Laikidis from Greece, and the machine was purchased from Barsso in Belgium. Dimensions are visible in the pictures. All certificates, wiring diagrams, and operating manuals will be provided upon request. All pictures were taken upon delivery of the machine; the current condition shows minimal signs of use. Lajdsyvrabspfx Ampea

Condition: used, Year of construction: 2000, machine/vehicle number: LC572, Technical Specifications & Performance Data Engineered for continuous olive oil extraction and seamless downstream packaging, this second hand line pairs traditional granite milling with modern separation. It can interface with a used bottling line for edible oil in PET or glass containers, supporting efficient industrial packaging workflows. Throughput: up to 2,500 kg/h (≈2.5 t/h) of olives, continuous duty Year of manufacture: 2000 Condition: READY FOR OPERATION Primary process stages: reception and elevating conveyors, washing/deleafing, four-wheel granite stone mill, malaxation (4 stainless tanks), vibrating screen, Barracane 4015 decanter centrifuge, Alfa Laval final separator (approx. 2000 L), centralized electrical panel Key components (sample): Various Equipment – Barracane 4015 decanter (2000), elevating conveyor, stainless malaxers with gear-driven paste pumps, Alfa Laval polishing separator Container types downstream: PET and glass as standard; compatibility with metal cans possible upon integration Typical oil packaging range downstream: 250 ml to 5 L (format depends on connected filler/capper) Materials in contact: food-grade stainless steel in malaxers, enclosures, and wetted parts Advanced Automation & Control Systems A centralized electrical panel manages motors, pumps, and malaxation temperatures for stable, repeatable extraction. The control architecture supports integration with bottling functions such as rinsing, filling, capping, and labeling for beverage production environments. Centralized start/stop, emergency stops, and status indicators Temperature control for malaxers to preserve organoleptic quality Variable-speed drives for conveyors and pumps to balance flow to the decanter PLC/HMI-ready I/O for line supervision, recipe management, and alarms Electrical supply: three-phase industrial standard (e.g., 400 V, 50 Hz) with protective breakers Lasdpfx Amew Ag T Ajpja Production Line Integration Capabilities Designed for easy pairing with downstream oil bottling equipment, the line can feed buffer tanks or directly supply a used bottling line for PET or glass. Interfaces support quick connection to rinsers, volumetric or weight-based fillers, cappers (ROPP, screw), labelers, and date coding/traceability modules typical of industrial packaging systems. Sanitary tri-clamp and flanged connections for rapid hook-up Flexible flow control to match filler speeds and minimize bottlenecking Compatible with conveyors, accumulation tables, and case packing systems Format agility for common edible oil SKUs without major hardware changes Machine Condition & Maintenance History In READY FOR OPERATION condition, this second hand Barracane-based system shows robust mechanical integrity and clean stainless surfaces in process-critical areas. Regular servicing has preserved performance of the granite mill, malaxers, and separator set, allowing immediate deployment and straightforward commissioning within an existing plant. Operational Performance & Versatility The granite stone mill ensures gentle crushing, while controlled ...

Year of construction: 2015, condition: ready for operation (used), This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. Application Types Lsdex D Ra Hepfx Ampsaa CNC Wood Machining

Year of construction: 2025, condition: ready for operation (used), Main Drive Spindle Speed 24000 RPM Spindle motor power 9 kW Ljdpfx Aex D Dnwempoaa Number of axis 3 This 3-axis QUICK CNC UE-481PL was manufactured in 2025. It features a robust heavy-duty base, a large working area of 2100 x 3050 x 200 mm, and a 9 kW HSD milling spindle capable of 24,000 rpm. Additional highlights include a 12-fold linear changer, dual 250 m3/h Becker vacuum pumps, and a wireless control panel. If you are looking to get high-quality CNC machining capabilities, consider the QUICK CNC UE-481PL machine we have for sale. Contact us for more information. Application Types CNC Wood Machining