Used Winding Machine, Lathe, Paint Shop, for sale (67,692)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: Nwsdpfxewzl Hxs Aaaof * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, DEMONSTRATION MACHINE WOODTURNING DAYS 2025 For sale is an as-new HAGER STAR 200 MAX lathe SET with external turning device. The demonstration machine is in very good condition. Technical Data: Nwjdpfxjwnqmko Aaaof - Center height 200 mm - Center distance 640 mm (expandable*) - Stepless speed 300 – 2,900 rpm - Hollow spindle D = 15 mm with internal taper MK2 - Tailstock quill travel 100 mm - Motor 2 HP / 400 V (with 230 V plug!) - Weight 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, woodturning lathe, woodturning, turning chisel, woodturning, turning, machine, Hager Reference: R-A0117 44051+44033

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER STAR 200 MAX lathe with a center distance of 640 mm. The exhibition machine is in its original condition, so you have the full guarantee. Nwedetpnzdopfx Aaajf Technical data - Center height 200 mm - Center distance 640 mm (extendable*) - Stepless speed 300 - 2,900 rpm - Hollow spindle D = 15 mm with inner cone MK2 - Quill travel 100 mm - Motor 1.5 kW / 2 HP / 400 V (with 230 V plug!) - Weight 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: as good as new (ex-display), Year of construction: 2022, EXHIBITION MACHINE Nwedpjvbcm Refx Aaaef For sale is a new TEKNATOOL Comet 2 DR lathe including base frame with a maximum center distance of 400 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data: - Center height 150 mm - Center width approx. 400 mm (extendable) - 3 speed levels (belt levels): 250 - 680 / 530 - 1,420 / 1,380 - 4,000 rpm - Digital display for speed - Spindle connection M33x3.5 with ASR (Euro) drain safety groove - Spindle and tailstock MK2 - Motor 0.6 kW / 0.75 HP - Forward / reverse rotation - Knife support 150 mm - Weight approx. 32 kg - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, turning machine, turning, turning knife, woodturning, turning, machine

Condition: excellent (used), Year of construction: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 lathe with a center height of 250 mm. The machine was used in our in-house lathe courses, is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) drain safety groove - Spindle bore (diameter) 20 mm - Tailstock quill 150 mm / MK3 - Hand rest upper part 300 mm - Weight 270 kg - Length x width 1,800 x 640 mm - Motor 2.2 kW (3 HP) - Speed 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Nodpfx Aertqi Ieaaswf Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, woodturning bench, turning, woodturning knife, woodturning, turning, machine Reference: DH25500-K

Condition: ready for operation (used), Year of construction: 2006, working width: 150 mm, overall weight: 150 kg, Conveyor Belt 2500 mm Manufacturer: Makor Type: TEP 2500 Powered conveyor belt from a finishing line (positioned in front of a Makor profile spraying machine), Length approx. 2500 mm Belt width: 150 mm Pass-through width (with existing side guides): max. approx. 320 mm Feed speed steplessly adjustable via variator Equipped with stable, adjustable side guides Dimensions approx. 2500 x 550 mm (LxW) Weight approx. 150 kg Documentation available Nwedpfextnfrsx Aaasf

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, working width: 400 mm, total length: 2,150 mm, total height: 1,600 mm, total width: 1,000 mm, working height: 950 mm, input voltage: 400 V, year of last overhaul: 2025, power: 1.5 kW (2.04 HP), warranty duration: 12 months, compressed air connection: 8 bar, - DEMO machine from our technicial center for special price! - Nwedpfxjffc Rae Aaaef Since 1970 Ceetec A/S produces wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our brush painting machine A250 is equipped with flood nozzles for painting all around and with up to 8 brushes (each 2 per side) and can paint wood for interior and exterior on all four sides in one shift. Speed: 16-42m/min max. height: 250mm max. width: 250mm resp. 380mm (A380) min. length: 800mm It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: used, functionality: fully functional, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea bunului identificat in prezentul anunt Prima licitație va avea loc la data de 08.04.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 15.04.2026, 22.04.2026, 29.04.2026, 06.05.2026, 13.05.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 06.04.2026 între orele 09:00-12:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar la nr. de telefon 0763 478 619 și să își exprime intenția de participare, anterior datei stabilite. Pe parcursul organizării ședințelor de licitație publică, lichidatorul judiciar va mai organiza zile de vizionare, care vor fi aduse la cunoștință persoanelor interesate. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA pentru bunurile de până la 5.000 euro și de 1.000 lei+TVA. pentru bunurile de peste 5.000 euro. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Nwjdpfx Aajyfhccoaef Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: used, Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Spindle speed driven by speed variator Njdpfxexuf Hve Aaaswf Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: excellent (used), Livio Macchia 08 LPT lathe part grinding machine Two grinding units Oscillating polishing brushes Nsdeydn Amjpfx Aaaowf Template-guided operation

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli OMK300 + UF 150/220 Turning length: 300 mm Nsdpoycv Emjfx Aaaewf Maximum square bar: 100x100 mm Minimum square bar: 20x20 mm Copy turning operation Drilling transfer UF 150/220

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, For sale is a used lathe from the Czech manufacturer TOS, model SU 100, with extensive equipment as shown in the photos. Nedpev Epk Defx Aaajwf Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as shown in the photos: 1 x 4-jaw chuck 2 x steady rest 1 x travelling steady

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? Nwjdpfx Aasxa Hzxsaof We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process. Njdpfx Ajxa Hx Roaaswf

Condition: like new (used), DEMONSTRATION MACHINE For sale: MIDI2 Plus lathe demonstration machine with a center height of 178 mm, including PRO DDMIDI-105 machine stand! The lathe has only been used briefly for demonstration purposes at Hödnerhof. Therefore, it is considered as new and comes with full warranty / guarantee. Technical Specifications: - Center height approx. 178 mm / turning diameter 355 mm - Distance between centers approx. 400 mm (expandable with optional bed extensions) - Speed ranges: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-rotation safety groove* - Tailstock with interchangeable quill, 100 mm MK2, trapezoidal thread and measuring scale! (Optional: Interchangeable quill with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg Nwjdpfx Aou Szlzsaajf The machine is located in Kuchl, A-5431. Subject to prior sale! (No shipping possible) Related terms: wood lathe, turning machine, lathe, woodturning, wood turning tools, woodturning, machine Reference: DDMIDI2-PLUS-VH

Condition: excellent (used), functionality: fully functional, Genini Miniautomatic Pass-Through Lathe Turning machine from square timber Main spindle with a two-speed motor with a power of 4.9/5.9kw Hydraulic pump motor with a power of 1.5kw Maximum length of square timber 950mm Maximum turning length 120mm Maximum turning diameter 80mm Two supports with profiling knives 1 front spindle for drilling or front profiling Nsdpfxex T A Ukj Aaaewf 1 roughing turning knife Machine weight approx. 1800kg

Condition: excellent (used), functionality: fully functional, Genini ROTOUR 100 lathe automatic Max working length: 300 mm Max turning diameter: round Ø 140 mm, square 100×100 mm Nwsdpfex Tz Trsx Aaajf Spindle motor: 15 HP Spindle speeds: 2050-2800-4100-5600 rpm Pump motor: 3 HP Grinding motor: 0.5 HP

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Complete DTR documentation Main engine with a power of 3/4kw Nwedpox Thw Defx Aaajf Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister TWISTER XL woodturning lathe with a center distance of 800 mm. The demonstration machine is in its original condition, so you receive full warranty. Technical data - Center height: 250 mm - Swing over bed: 490 mm (up to 900 mm with optional outboard turning device!) Nwsdpfetpxx Ijx Aaajf - Center distance approx. 800 mm (extendable!) - Spindle fitting M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Frequency inverter (2 belt speeds): - 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale), trapezoidal-thread leadscrew - Motor: 2 HP - Weight: approx. 290 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight forwarder: Austria: € 125 incl. VAT Germany: € 150 incl. VAT South Tyrol: € 180 incl. VAT Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, woodturning tools, wood spinning, turning, machine Reference: R-A0117

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is a near-new Drechselmeister MIDI PRO benchtop wood lathe with a center distance of 450 mm. This demonstration unit is in its original condition and therefore includes the full warranty. Technical specifications: - Center height approx. 178 mm (swing over bed 355 mm) - Center distance approx. 450 mm (extendable!) - Speed ranges: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) safety groove* - Tailstock with exchangeable quill MK2, 100 mm - Motor: 0.7 kW / 1 HP (230 V) - Forward/reverse operation - 4-prong drive center and live center MK2 - Tool rest 250 mm (shank 25.4 mm) - Faceplate 95 mm - Assembled machine weight approx. 67 kg - Weight of individual components (for easy transport, e.g. to markets): - Headstock 27 kg - Bed 26.4 kg - Tailstock 7.5 kg - Complete tool rest 6.2 kg The machine is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Shipping via freight forwarder: Austria: € 60.00 incl. VAT Germany: € 70.00 incl. VAT South Tyrol: € 95.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, bench lathe, wood lathe, woodturning, turning tools, wood turning, machine Reference: R-A0117 Njdpfjtpn Tlsx Aaajwf

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive full warranty coverage. Technical Specifications - Center height: 180 mm - Swing over bed: 358 mm (can be extended with optional outboard turning attachment – depending on workpiece) - Center distance: approx. 560 mm (extendable) - Spindle connection: M33 x 3.5 with ASR (Euro) anti-loosening groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Total length: 1,345 mm - Weight, freestanding version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Nwjdpfstphy Ajx Aaaof Shipping by carrier: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, woodworking lathe, turning, woodturning, turning tools, wood turning, machinery Reference: R-A0117

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. This showroom machine is in its original condition, so you receive the full warranty. Technical specifications: - Center height: 200 mm - Swing over bed: 395 mm (up to 700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (with trapezoidal thread), prepared for ER-25 drilling quill - Motor: 1.5 kW / 2 HP (230 V connection) - 2-stage brake switch Nwjdpfxetpnaws Aaaef - Weight, bench model: 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can handle your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: as good as new (ex-display), DISPLAY MODEL For sale is an as-new Drechselmeister MIDI 2 PLUS lathe with a maximum turning diameter of 355 mm. The display model is in its original condition, therefore you receive the full warranty. Nwodpotpn Srsfx Aaaef Technical Data - Center height approx. 178 mm / Turning diameter 355 mm - Distance between centers approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection: M33 x 3.5 (taper MK2) with ASR (Euro) anti-release groove* - Tailstock with 100 mm MK2 quill, trapezoidal thread, and graduated scale! - (Optional: quill with ER25 collet system for drilling) - Motor: 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please provide your full address in the contact form so we can handle your inquiry professionally! Thank you, your NEUREITER team Related terms: woodturning lathe, lathe, turning machine, woodturning tools, wood turning, turning, machine Reference: R-A0117

Condition: new, AUTOMATED PAINT SHOPS Nodody Ez Ispfx Aaaewf These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, glazing, coating, washing and similar system requirements.

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. - Digital speed display. - Hardened steel edge of the hand rest. - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 Nwedpfxotuuv No Aaajf - Tool rest / tailstock bore: 17 / 17 mm - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: - Driver tip - center point - face plate - Hand rest - Punch with brass tip - Key for spindle lock