Used Variator Pulley for sale (647)

Condition: good (used), V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -V-belt pulley: 4-groove pulley SPB 200/4 Iisdpfelu N D Ssx Aa Iec -V-belt width: 17 mm -Taper bushing mount: Ø 55 mm (can be replaced) -Quantity: 1x pulley available - Price: per piece -Dimensions: Ø 207 x 82 mm -Weight: 11.2 kg/pc.

Condition: good (used), V-belt pulley, belt pulley -V-belt pulley: Pulley 4 grooves Iedpfx Aasm T Ahao Ieic -V-belt width: 17 mm -Intake: Ø75 x 140 mm -Dimension: Ø260 x 140 mm -Weight: 15 kg

Condition: good (used), V-belt pulley, pulley -Large selection of V-belt pulleys -Offer available upon request Iijdpfx Asb A Id Uja Ijc

Condition: good (used), Flat belt pulley, belt pulley, drive pulley, roller pulley Isdpewuzk Hefx Aa Ijic -Pulley: Flat belt pulleys 7 pieces -Width 70 mm -Hole: Ø 18 mm -Dimensions: see photos -Shipping/Price: complete -Dimensions box: 430/210/H115 mm -Weight: 11 kg

Condition: new, DEMAG traverses with rope pulleys for P Train / DR / MDR / DH Iodpeu U Nhvefx Aa Ieic

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: 6 pieces diameter 180 mm. / inside 40 mm. 2 pieces - 260 mm. / 45 mm. 6 pieces - 260 mm. / 90 mm. Iedpfeu U Rayox Aa Ioic 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm.

Condition: new, as new and unused, ex-stock, 6 units available, unit price €500 Isdpfx Aoyc Em Toa Ieic

Condition: used, Variator pulley, vario timing pulley, vario pulley, PIV gearbox, vario gearbox, variable speed pulley, variable pulley, expansion pulley, adjustable V-pulley Iodpfx Aashm Nxas Ioic -Manufacturer: Marzorati, Vario pulley with thrust bearing type PE 3 -Outer pulley diameter: 180 mm -Diameter inside: 28 mm -Dimensions: Ø180 x 145 mm -Weight: 3.2kg

Year of construction: 2008, condition: good (used), Indoor crane, crane, electric wire rope hoist, hoist, motor cable winch, motor winch, tackle, pulling winch, pulley block -Manufacturer: Verlinde, control for electric wire rope hoist type VT202116 -Control voltage: 48 V -Frequency converter: Variator VT Iiodpfowmk Ekox Aa Ijc -Individual components: see photos -Delivery/Price: complete -Dimensions: 630/310/440 mm -Weight: 30 kg

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Stop position: TDC Voltage: V 380 Frequency: 50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: Iiedpfxewaiw Sj Aa Ioc • Safety guards with safety keys; • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Condition: used, Pulley Diameter 700mm Max sawblade width 35mm Table size 980mm x 700mm Max blade length 5120mm Table Tilting 0 to 35 degrees Isdpfx Aezd Uuhea Ioic Throat capacity 600mm Max. Cutting height 350mm Adjustable rip fence 4 Hp motor and starter Weight 435kg

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Iijdpfxetqfv Ie Aa Ijc Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Isdpfx Aaoyatkbe Ijic Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Pulley Diameter 700mm Max sawblade width 40mm Table size 765mm x 1000mm Table Tilting 0 to 35 degrees Throat capacity 680mm Max. Cutting height 485mm Adjustable rip fence 4 Hp motor and starter Iisdpfswl H Daox Aa Ioc DC brake Serial number 80210

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Model - RMC10. ✅ Serial number - 18109. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. Iisdpfx Aajx Dbkcj Ijc ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: excellent (used), Here we offer you an FRT MicroSpy Mobile. Device designation: FRT MicroSpy Mobile, Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable optical profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements to be performed "on-site" to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts. Excellent resolution values. Excellent reproducibility. Non-destructive measurement. Handles and adjustable support feet. Low weight (approx. 5 kg). FRT Technical Specifications: Device: MicroSpy Mobile xy-travel 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical cross-roller guide Drive: DC motor with ball screw Travel (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3 mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height variation (per axis): < 2 µm / 50 mm (of which not reproducible): < 0.5 µm Right angle XY: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel Position measuring system Measuring system resolution Axis wobble Coarse adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point distance xy: 1 µm Sample size: - Sample weight: - Min. measurement speed: 1 µm / sec Max. measurement speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring system: approx. 5 kg Footprint measuring system: approx. 0.3 x 0.3 m² Dimensions control unit (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Power supply EU version: 110 - 240V, 50 - 60Hz, 16A Power supply US version: 110 - 240V, 50 - 60Hz, 16A Power consumption: typically 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel Iedszdnqcspfx Aa Isic 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cable for cold devices 1 x Mouse (PS/2) 1 x Keyboard 1 x Monitor 19'' TFT Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ Iisdpfjy Spl Hjx Aa Ioc - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, Manufacturer : SPXFLOW Lightnin Model : Mi5P10 Year : 2015   Type: Pneumatic mixer / stirrer Diameter of the mixing head: 240 mm Length of the stirring shaft: 915 mm Shaft diameter: 25 mm Required pressure: 6 bar Speed variation: mechanical Manual lifting system / counterweight Lifting stroke: 1290 mm Maximum container width: 980 mm Dimensions:> floor to agitator (lower position): 0 mm Dimensions: floor to> top of mixing unit (raised position): 1255 mm Dimension : 1110 x 1300 x 3270 mm Isdpfx Aajzbyp Ho Ioic   Technical documentation available Video showing the machine in operation in our workshops

Condition: excellent (used), Year of construction: 2020, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 808482, Excellent condition 2020 Rollomatic ShapeSmart NP50 CNC pinch & peel grinding machine. Fully operational and under power. Includes latest software package, Comat coolant filtration/temperature control system, Marcus checking system, loader pallet sets, ultra precision collets, grinding wheels, tooling and accessories. Immediate availability, inspection and demonstration welcome by appointment. The high-speed tool loader, designed by Rollomatic and integrated into the basic machine, was developed with fast setup and ease-of-use in mind. This is achieved by using pre-calibrated cassettes and clamps to hold different diameters without resetting the position. Rollomatic automatic loaders are known to be the fastest and most reliable in our industry. Ijdpfey Udwvex Aa Isic Fast to set up Capacity up to 1’000 parts Robust, low maintenance design Checking and measuring the part immediately after machining is essential to guarantee the quality of the production. The post-process measuring system immediately transmits the compensation value that may be necessary to achieve production within the planned tolerances. Accuracy & reliability Compensation of the grinding wheel position Constant production quality The Smart Touch Probe is a contact measurement system that allows the blank position to be defined before grinding and avoids variations during production. The system also compensates for machine thermal drift caused by changes in ambient temperature. Runout compensation and core diameter measurement Setting assistance Superior stability during the production process Elimination of scrap during unattended production The StickSmart® is an automatic sticking system for in-process cleaning of grinding wheels. The «stick», mounted in a holder, is used to regenerate superabrasive grinding wheels to maintain their cutting performance. Extends the working life of the wheel Extends unattended production cycles with high-performance wheels Reliable and safe automatic process for the operator. Efficient, economical and safe solutionSimple and efficient, the right-side door has been designed to facilitate the work of the operator when changing the orientation of the grinding wheels. Ergonomics for the operator Secure opening Guaranteed tightness

Condition: ready for operation (used), functionality: fully functional, The Lakidis PL900 mixer is an industrial double-blade mixer designed for food processing professionals seeking fast and uniform product homogenization. Particularly suitable for the meat, poultry, fish, and processed food industries, it allows for the creation of a homogeneous mixture while preserving the quality of the raw materials. Thanks to its counter-rotating double-blade system, the Lakidis PL900 ensures efficient distribution of spices, marinades, sauces, and additives throughout the mixture. The blades rotate in opposite directions with a slight vertical offset, which promotes optimal homogenization. As a result, the quality of batches is improved, and production variations are reduced. Furthermore, the speed and direction of rotation can be adjusted according to manufacturing needs. Its construction entirely in stainless steel guarantees a high level of hygiene and facilitates daily cleaning. The front discharge system allows for rapid emptying into standard 200-liter containers, while the pneumatic lid ensures safe production operations. Moreover, its robust design allows it to operate in demanding industrial environments with excellent reliability. Finally, the Lakidis PL900 mixer represents a high-performance solution for companies wishing to increase their mixing capacity while maintaining consistent quality. As a used, inspected, and reconditioned piece of equipment, it offers an excellent performance-to-investment ratio for food industry manufacturers. Technical specifications: Brand: Lakidis Model: PL900 Type: Industrial double-blade mixer Tank capacity: 900 L Mixing system: counter-rotating double blades Ijdpfxezcni De Aa Ieic Motor power: 11 kW Loader power: 1.1 kW Construction: all-stainless steel Discharge: front, to 200 L container Length: 1800 mm Width: 1150 mm Height: 1700 mm Width with loader: 2000 mm Height with loader: 2400 mm

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg Iijdeyhckmspfx Aa Isc MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: used, Cutting length 3000mm Cutting height 160mm Advance speed by electronic variator Guide with programming Motor 15kW 400V Ijdozbxxmopfx Aa Isic

Condition: used, Year of construction: 2015, Manufacturer : SPXFLOW Lightnin Iedezak Ikepfx Aa Ieic Model : Mi5P10 Year : 2015   Type: Pneumatic mixer / stirrer Diameter of the agitator: 320 mm Length of the stirring shaft: 915 mm Shaft diameter: 25 mm Required pressure: 6 bar Speed variation: mechanical Manual lifting system / counterweight Lifting stroke: 1680 mm Maximum width of a container: 950 mm Floor>-to-agitator height (lower position): 65 mm Floor-to->top height of the agitator (top position): 1740 mm Dimensions: 111 x 130 x 327 cm   Technical documentation available Video showing the machine in operation in our workshops

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Here are the most important technical data and features at a glance: Technical Data Iiodpfjzdqdlex Aa Ijc Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Distance spindle - table min. 132 mm / max. 724 mm Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 900 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 660 mm, overall weight: 3,050 kg, table load: 1,250 kg, number of axes: 3, This 3-axis Other SHEFFIELD Endeavor 9.15.7 was manufactured in 2003. It features an X-axis travel of 900 mm, Y-axis travel of 1500 mm, and Z-axis travel of 660 mm. The machine is equipped with a granite table and brushless linear motors on the X and Y axes. If you are looking to get high-quality measurement capabilities, consider the Other SHEFFIELD Endeavor 9.15.7 CMM machine we have for sale. Contact us for further details. • CE Marked • Maximum 3D Speed: 39 m/min • Maximum 3D Acceleration: 1.7 m/s² • Voltage: 240 V • Accuracy Standard: DIN EN ISO 10360-2 • Specified Accuracy Temperature Range: 15°C – 25°C • Volumetric Length Measuring Error (MPEE): 2.8 + L/263 µm • Volumetric Probing Error (MPEP): 3.0 µm Iisdpjzcwfbofx Aa Ijc • Maximum Hourly Temperature Gradient: 2°C/h • Maximum Daily Temperature Gradient: 5°C/24h • Maximum Spatial Temperature Gradient: 1°C/m • Permissible Ambient Temperature Variation: ±5°C • Granite Table • Threaded Inserts: ISO M8 x 1.25 • Air Bearing Axes • Brushless Linear Motors on X and Y Axis • Renishaw High-Resolution Linear Scales • Geometric Error Compensation • Automatic Volumetric Temperature Compensation • Probe Head: Renishaw PH10MQ • Probe Head Weight: 645 g • A-Axis Indexing Range: 0° to 105° in 7.5° Increments • B-Axis Indexing Range: ±180° in 7.5° Increments • Positioning Repeatability: 1 µm • Maximum Extension Length: 300 mm • Probe Head Mount: M10 Thread • Probe Connection Thread: M8 Thread • Probe System: Renishaw TP20 • Reference Sphere Diameter: 19 mm • Parallel Port Sale WITHOUT Software License