Used Ultrafilter Ecoair Smf 30/30 for sale (24,120)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Bedpfxeu Tln Ns Afmjdf Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC Bdsdpsxb Eg Nsfx Afmjf workpiece weight 4500 kg table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Bdedpey Urtfjfx Afmef Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 262, Year of construction: 2019, operating hours: 3,423 h, load capacity: 3,000 kg, lifting height: 5,190 mm, free lift: 1,600 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,375 mm, remaining battery capacity: 100 %, battery voltage: 80 V, tire condition: 100 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: CE marking, UVV, cabin, lighting, seat heater, sideshift, STILL RX 60-30 Electric Forklift – Fully Refurbished with a NEW Battery and 12 Months Warranty Powerful. Reliable. Ready for immediate use. For sale is a high-quality STILL RX 60-30 electric forklift with extensive special equipment, high lift capacity, and a hydraulic fork positioner with telescopic forks. The vehicle has been professionally refurbished, is in very good technical and visual condition, and will be delivered with a new traction battery. Your advantages at a glance: ✅ Fully refurbished vehicle ✅ New 80 V traction battery ✅ 12 months warranty on the vehicle and the new battery ✅ Lifting height up to 5,190 mm ✅ Hydraulic side shifter with fork adjustment and telescopic forks ✅ Comfortable full cab with heating ✅ Extensive safety equipment ✅ Immediately available Technical data Manufacturer: STILL Type: RX 60-30 Load capacity: 3,000 kg Mast: Triplex free-lift mast with full free lift Lifting height: 5,190 mm Overall height: 2,375 mm Free lift: 1,600 mm Comfort and safety features The full cab with heating, air-suspended comfort seat including seat heating, and modern multi-lever control ensures comfortable working, even during long shifts. In addition, the vehicle has numerous safety features such as: LED work lights front and rear STILL SafetyLight 4PLUS FleetManager access system Shock detection Warning light when reversing Panoramic mirror Road traffic act (StVZO) compliant lighting Special highlight: Telescopic forks with fork adjustment The installed attachment enables hydraulic fork adjustment as well as extendable telescopic forks from 1,350 mm to 2,350 mm. This makes the vehicle ideal for loading and unloading trucks, handling various types of load carriers, and use in warehouse and production areas with changing requirements. Scope of delivery Fully refurbished STILL RX 60-30 New 80 V traction battery Charger Operating manual 12 months warranty Bsdpfxozd Nyrs Afmedf Selling price: €24,890.00 net plus transport costs An immediately operational premium electric forklift with high lift capacity, high-quality equipment, and a new battery. The ideal solution for companies that value reliability, efficiency, and high productivity. We will gladly prepare an individual offer for you, including transport to your location.

Condition: ready for operation (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 520-003956, Lisec spacer bender Printer for spacers not available Bsdpfovktytex Afmedf

Condition: used, mileage: 241,000 km, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 10,000 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 8,000 kg, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, General information Year of manufacture: 2023 Registration number: 50-BXD-4 Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Front axle: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Rear axle 2: Lift axle; Max. axle load: 8000 kg; Steering; Tyre profile left: 60%; Tyre profile right: 60% Weights Empty weight: 14.375 kg Carrying capacity: 13.625 kg GVW: 28.000 kg Maintenance APK (MOT): tested until 11/2026 = Additional options and accessories = - Air horn - Alcoa rims - Aluminium fuel tank - Coupling Ringfeder - Heavy duty engine brake - Lock diff - Outside temperature display - Rear air suspension - Refrigerator - Sleeper cab - Visor Bdsdpfx Afjznb Ipsmof = Remarks = 750 L Aluminium Fuel Tank Silo Heitling 30M 3 Volume 30,000 L Year of manufacture 2010 RTI Compressor Year of manufacture 2023

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 09/2027, total width: 880 mm, total length: 690 mm, input frequency: 50 Hz, electrical fuse: 16 A, Dough kneader Kemper F 30 SL Dough kneader – dough mixing machine Kemper, model: F 30 SL with stainless steel bowl and kneading arm very robust technology! Flour dust cover 2 speeds with timer Machine is mobile only available from us, DGUV V3 certified Connection: 400V, 16A CEE plug Dimensions: 880 x 690 x 1135/1480 mm, W x D x H Used machine Visit our large exhibition of bakery machines! Bodpjy Nv A Tjfx Afmodf

Condition: used, SMA Sunny Tripower STP 25000TL-30 Solar Inverter, 25 kW Available quantity: 11 units Manufacturer: SMA Solar Technology AG Model: Sunny Tripower STP 25000TL-30 Bodpfx Afszn Aytomodf Device type: Solar inverter Condition: used Year of manufacture: 2016 Rated AC power: 25,000 W Apparent power: 25,000 VA DC maximum voltage: 1,000 V MPPT voltage range: 390–800 V Max. DC input current: 33 A / 33 A Max. PV short-circuit current: 43 A / 43 A AC rated voltage: 380 / 400 / 415 V (3~) Grid frequency: 50 / 60 Hz Max. AC output current: 36.2 A Degree of protection: IP65 Protection class: I Surge voltage category: III Weight: max. 61 kg

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Coupling: torsionally flexible shaft coupling for splined shaft -Shaft: Ø 28 mm -Toothed shaft: Ø 30/27 mm, dimensions see photos -Number: 2x couplings available Bjdpfx Afezld Nksmedf -Price: per piece -Dimensions: Ø 115 x 150 mm -Weight: 4.4 kg/piece

Condition: used, Year of construction: 2000, operating hours: 4,513 h, lifting height: 3,700 mm, fuel type: diesel, mast type: duplex, fork length: 1,090 mm, fork width: 1,050 mm, total height: 2,390 mm, total length: 2,650 mm, total width: 1,240 mm, color: orange, Empty weight: 4.440 kg Lifting capacity: 3.000 kg - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 10479 - Operating hours: 4513 - Lifting capacity: 3000kg - Lifting height: 3700mm - Overhead clearance: 2390mm - Fork length: 1090mm - Maximum fork width: 1050mm - Minimum fork width: 250mm - Number of wheels: 6 Wheels - Attachment: Side-shift - Options: Work lights, Air tires, Joystick, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Toyota 2Z Bdedpfx Aeziybwjfmef - Transport dimensions: 2650mm x 1240mm x 2390mm (l x w x h) - Transport weight [kg]: 4440kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), machine/vehicle number: 10403, Standart Machine 4-head Bjdpfxozqr Sdo Afmjdf

Condition: new, maximum load weight: 37,619 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,240 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t Ramps | Top Specification Location: Germany Condition: New / Unused Availability: Immediately --- Description For sale is a brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low-loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps — ready for immediate use. --- Technical Data Dimensions: - Overall length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm Bdjdpfx Aex Efzujfmsf - Overall width: 2,550 mm (+600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights: - Permissible gross weight at 80 km/h: 48,000 kg - Permissible gross weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - Kingpin load: up to 18,000 kg --- Chassis & Axles: - 3 BPW axles, air suspension, drum brakes - 1 trailing axle at rear - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tyre pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area: - Foldable 40t access ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + chequer plate over wheel arches --- Load Securing: - Multiple 8,000 daN and 13,400 daN lashing points - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - 450 mm front wall, side and rear walls made of aluminium --- Body & Chassis: - High-strength S700 MC steel - Partially metallised (Zn/Al 85/15) — strong corrosion protection - Rear angle: 10°, 500 mm - 2" kingpin - Mechanical landing legs at front - 45t supports at rear --- Equipment: - 2× toolboxes - All-round warning beacon - LED lighting - Rear work lights - Wheel chocks - 9×2 extensions (up to +300 mm) - Stake box - Reflective strips on sides & rear --- Colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Condition: used, Year of construction: 2020, _____KTS 30 Special / Crane-Manure Tank Saddle Trailer, 3-axle, 30 cbm tank capacity - V2A stainless steel tank, DIN 1.4301, manufactured in-house - Nova-Gray powder-coated frame - Tank diameter 2200 mm - Manhole at the rear - 3 baffle plates specially welded - Rinsing system for stirring the contents - 2 x hose storage, aluminum - Tire size 385/65 R 22.5 - 3 axles, SAF with air suspension - ABS - EBS - Disc brakes with special off-road protection - Wabco braking system with spring brake accumulator and parking brake - 1st axle as a lift axle with starting aid - 2nd axle rigid - 3rd axle trailing steering axle with automatic locking from 30 km/h and when reversing - Automatic filling shut-off via float and indicator at the front - Free filling and venting - 6 x polyethylene fenders - 2 x LED work lights at the rear - Aluminum support legs - Underrun protection with truck tail lights - 1 x lockable storage box on the left, water tank with soap dispenser for hand washing on the right - Document holder - Ge-Ka couplings for filling at the suction arm - Compressed air discharge at the suction arm for suction hose - TÜV inspection - Surcharge for tank with 31.7 cbm - KTS surcharge for 31.7 cbm tank instead of 30.0 cbm (longer chassis required) - All KTSPROFI package, KTS 30 light - Simplest operation by pressing a button - Fully automatic interlocking of the tank ventilation valves - No possibility of incorrect operation - With overpressure and underpressure valves - Ventilation valve and suction valve as pneumatic flat gate valves - Main control panel at the rear left in a stainless steel housing with laser-engraved control panel - Additional control panel at the front left, level indicator at the rear with cover - Automatic pump shut-off when full - Pump Vogelsang 6 cbm KTS 30 - Vogelsang rotary lobe pump VX 186-260, 6,000 liters / min. - Injection system and interchangeable housings - Docking funnel at the top, 8 inches with knife gate valve (KTS) - with pneumatic actuation (flat gate valve) for all vehicles - Pump mounting parts in stainless steel 1.4301 - instead of galvanized version - Flat gate valve under the tank, KTS 30 - Flat gate valve under the tank for discharging with KTS 30 (MANDATORY !! for KTS docking funnel at the bottom and if there is the possibility of transferring liquid) - Overflow tank, KTS - made of stainless steel with swivel flap and drain valve - Additional LED headlight at the front (2 pieces) - 2 LED spotlights at the front, mounted under the hose trays on the right and left - Transfer crane 6" KTS short - Transfer crane in 6" up/down, right/left, approx. 6 m long. Only for emptying! - Slide dome cover 600 KTS 30 - Slide dome cover 600 pneumatic for KTS 30 - Storage location: BNP PARIBAS LEASE GR Bjdpfx Aezpgriefmsdf

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 9 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 130 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: New Front tire type: Superelastic Bedpfxovla S Ss Afmodf Front tire size: 28X9-15 Rear tire type: Superelastic Rear tire size: 6.50-10 Fork positioner, 3rd valve, 4th valve, front work light, roof protection, soot filter, full cabin, CE certificate, safety light. Image serves as a symbolic representation.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 475 h, load capacity: 336 kg, lifting height: 3,000 mm, fuel type: electric, drive type: Elektro, High-lift order picker Mast type: None Technical condition: good Battery condition: 80 - 100% Bdjdpfjvg Tlbjx Afmsf CE Certificate,

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Bdjdpfjzn Hx Tex Afmef

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine HURCO BMC 30 M, year of manufacture 1997 Control system: ULTIMAX 3 dialog Travel distances: X 762 mm, Y 458 mm, Z 610 mm Table: 500 x 1000 mm Spindle speed: up to 8000 rpm Spindle mounting: SK40 Bodpezlbytsfx Afmjdf Magazine capacity: 24 positions with 24 tool holders Coolant system included. The machine was used for milling plastics. Machine is ready for operation. Machine documentation is available.

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Bdodpfx Asvlz Arefmef Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Bdsdpfx Afodx R Tfjmof Location: In stock at 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works Bdodpfx Afsi Amnpsmof - available for immediate delivery -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Bjdpfjh D If Hox Afmsdf Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, Holzkraft FS 30 Classic Tersa Planer-Jointer with Tersa cutterhead and planer knives - quick-change system The Tersa planing knife system enables knife changes in seconds and ensures particularly quiet operation. Helically toothed steel infeed roller for consistent and even wood feed. Extra-long planer tables. Large fence can remain in its position when the planer tables are opened. Planer tables open towards the rear. High machine weight. Powerful industrial motor. Robust steel and cast iron construction. Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. chip removal: 4 mm Dimensions of thickness table: 565 * 300 mm Min./max. working height: 3/230 mm Feed speeds: 7 m/min Planer spindle diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 hp) Dust extraction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized fence Bedpfebuldyox Afmodf Available from stock in Bitburg - immediately available -

Condition: used, Second-hand machine Second-hand Ganner Compact 30 row drilling machine Bsdpfx Aezk Nwdsfmsdf Features and technical specifications: 2 drilling beams, each with 15 spindles Pitch 32 mm Drilling unit position adjustment 0–650 mm Distance between rows of drill holes: at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Maximum workpiece clamping height: 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 16 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center of gravity: 500 Bdsdpfx Afszmklhemsf ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: SE 6.50 10 Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: ready for operation (used), Bosch SM 20 / 30 GTC - SM 20/30 GTC pulse inverter, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bjdpfx Asi D Udcefmsdf