Used Tiede Crack Detector for sale (748)

Condition: good (used), clear span: 2,700 mm, total length: 22,365 mm, load per truss pair (max.): 1,500 kg, shelf height: 2,200 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 22,365 mm Number of bays per racking row: 08 units, each 2,700 mm Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per bay: 09 units Number of pallet spaces per row: 72 units Total number of pallet spaces: 72 units Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 500 kg Included in the scope of supply: 09x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,200 mm high 1,100 mm deep 32x Pallet racking beams, used Material color: yellow Beam type: HN85|20 Dwjdpfx Aajzupayo Isc Box profile: 85 x 50 mm Connector: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 64x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 36x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Dwjdpfx Aaozxup Ij Ijc Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Condition: used, mileage: 135,500 km, power: 120 kW (163.15 HP), first registration: 06/2024, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2026, color: grey, gearing type: mechanical, number of seats: 3, total length: 7,550 mm, total width: 2,270 mm, total height: 3,310 mm, loading space length: 4,910 mm, loading space width: 2,200 mm, loading space height: 2,340 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, RENAULT MASTER – PR+PL – SLEEPER CAB – AIR CONDITIONING – CRUISE CONTROL – TOP CONDITION ----VEHICLE HISTORY IN EXCELLENT CONDITION! GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----VEHICLE DATA MILEAGE: 135,500 km WHEELBASE: 4.24 m Dodpfx Aaszfdide Ijwc 3-SEATER TRANSMISSION & DRIVING SYSTEMS 6-SPEED MANUAL TRANSMISSION START/STOP AUTOMATIC CRUISE CONTROL LANE KEEPING ASSIST COMFORT & INTERIOR AUTOMATIC CLIMATE CONTROL ELECTRIC WINDOWS HEATED SEATS MULTIMEDIA & CONNECTIVITY NAVIGATION SYSTEM MULTIMEDIA SYSTEM BLUETOOTH SLEEPER CAB & ADDITIONAL EQUIPMENT SLEEPER CAB WITH 2 WINDOWS 3 STORAGE COMPARTMENTS AIR COMPRESSOR AXLE 1 TIRES: 225/65 R16 AXLE 2 LEAF SPRING SUSPENSION TIRES: 225/65 R16 CARGO AREA DIMENSIONS LENGTH: 4.91 m HEIGHT: 2.34 m WIDTH: 2.20 m WINDSHIELD CRACKED ----EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least EUR 500.00 / EUR 1,000.00 will be charged for sales to EU and third countries. Subject to changes, errors and prior sale! You can find more vehicles on our website: Sales are made exclusively according to our terms and conditions – see website. Important note – important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of § 145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: good (used), Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking bays: 01 unit Length per racking bay: 19,559 mm Number of fields per racking bay: 07 units Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per field: 09 units Number of pallet spaces per bay: 63 units Total number of pallet spaces: 63 units Based on: Load handling equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of supply: 08x Pallet racking uprights, used Material color: green Frame profile: M94 Profile dimensions: 76.2 x 74.7 x 2.3 mm including cross and diagonal braces, base plates Dwodpfx Aaezu Nwrs Isc The uprights are pre-assembled (bolted framework) Height: 2,710 mm Depth: 1,050 mm 28x Pallet racking beams, used Material color: yellow Box profile: 116 x 40 mm Beam type: GNA 116x40 SEG5 Connector: 5 hooks clear width: 2,707 mm max. load per pair of beams 2,400 kg, with evenly distributed load. 56x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 32x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 16x Shims, used Design: completely galvanized for leveling the racking uprights that are installed on uneven ground 01x Load sign with information on field and bay loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: ready for operation (used), KUKA 1FK7103-5AF81-1YY3-Z S17 servo motor, serial number: YFV950655147011 - Connector with a small crack at the thread, used, in good condition, 100% functional, scope of delivery as shown in the photos. Djdozvaf Nopfx Aa Iowc

Condition: used, Year of construction: 2004, operating hours: 19,000 h, machine/vehicle number: D35601, The Senzani CM5 is a continuously operating, vertical cartoning machine from Senzani Brevetti, specifically designed for the precise packaging of individual items such as capsules, pouches, or smaller packaged products into pre-glued folding cartons. Machine features: Dwjdpfx Aszp Iw Hoa Isc Operating principle: Continuous motion for high process stability. Application: Vertical filling of pre-glued cartons, often combined with counting and dosing systems (coffee or tea capsules, lawn seeds, muesli, or pet food). Integration: Seamless integration into fully automatic primary and secondary packaging lines is possible. The machine operated for almost 19 years at Flechtorfer Mühle, where it was only used to fill one product. After being taken over by a birdseed company, it successfully completed a test run. Following the sale and a longer period without power, a software update from Senzani is necessary, costing approximately €12,000. A metal detector is included in the offer. A pendulum cup feeder can be purchased separately to ensure consistent feeding.

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 14-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo driven sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 14 heads; weighing range (single dump): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 85 cycles/min; bag sizes: L(40-300)xW(60-220)mm, (double film pulling possible for longer bags); suitable film width: 140-460mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Dwodpfx Ajv Nnbpea Ijc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, VFFS machine with integrated free-fall metal detector for checking vertically falling products and with 10-head multihead weigher for bulk materials and granulates. Compact design without platform stand. Suitable for form, fill and seal of pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; pneumatic sealing unit for end sealing; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications multihead weigher: number of weighing heads: 10 heads; weighing range (single dump): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge flap: single flap; surface finshing: plain surface (optional for surcharge dimpled surface); product contact parts from: AISI 304 (optional for surcharge AISI 316). - Specifications free-fall metal detector: sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to the forming collar. - Specifications VFFS machine: max. speed of the machine in neutral: 65 cycles/min; bag sizes: L(40-350)xW(70-270)mm, (double film pulling possible for longer bags); suitable film width: 160-560mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; air pressure: 0.4-0.8MPa. Dwodpev Nnbvjfx Aa Ijc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, X-ray inspection system for middle-sized bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 410 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 80 kVp, 1.25 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; conveyor belt height: 850 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system L900xW920xH1825 mm; weight: 350 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dwjdpfx Aasv Nm Inj Isc

Year of construction: 2025, condition: new, X-ray inspection system for middle-sized bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 410 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 80 kVp, 7 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; conveyor belt height: 850 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: L900xW920xH1825 mm; weight: 350 kg. Dwsdpfxev Nm Ius Aa Isc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, X-ray inspection system designed for large trays, boxes, large bags. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 600 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 150 kVp, 7.5 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; X-ray beam: horizontal scan; conveyor belt height: 750 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 60 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: L1800xW1300xH1900 mm; weight: 580 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dwjdpev Nm Izsfx Aa Ioc

Year of construction: 2025, condition: new, X-ray inspection system specially designed for glass bottles. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 85 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 150 kVp, 7.5 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; conveyor belt height: 1100 ± 30 mm; conveyor speed (dependent on product dimensions): 10 –100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system: : L3500xW1300xH1795 mm; weight: 700 kg. Dwedpfxsv Nm Nfj Aa Isc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder - Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 10 cycles/minute; bag width: 250-450mm; bag length: 250-500mm; compressed air: 0.2m³/min, 6.5bar; power: 220V, 1 phase; dimensions of the machine: L1150xW950xH1570mm. Dodpfxjv Nllrs Aa Iewc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Horizontal packaging machine, DUPLEX MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Duplex version with higher cycle rate. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 25 cycles/minute; bag width: 100-300mm; bag length: 100-350mm; compressed air: 0.4m³/min, 6.5bar; power: 220V, 2kW, 1 phase. Dwodpev Nllxjfx Aa Ioc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: like new (used), overall weight: 6,400 kg, maximum load weight: 650 kg, load capacity: 500 kg, Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate Dwodjrrwdbopfx Aa Ijc Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. Suspension: Rigid type centrifuge on inertia plate. Lid: with 3 manual opening closures, lid opening by means of a hydraulic piston (includes hydraulic power unit), a flat sight glass, an inclined sight glass, cake scraper, N2 inlet fittings and with washing tube and loading tube connections Transmission: 37 kW ATEX electric motor Securities: pneumatic lid opening safety piston, lid safety piston detector. lid open detector. detector for tachometer on machine and motor (includes connection box)

Condition: used, mileage: 200,000 km, power: 315 kW (428.28 HP), axle configuration: 4x4, color: white, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. number). Mercedes-Benz Actros 1843 LS HAD 4x4 semi-trailer tractor unit. !!! 2 units available !!!, A1C front axle 7.5 t, A1H hydraulic auxiliary drive (HAD), A1Y front axle, straight version, B1B electronic brake system with ABS and ASR, B1F heater, electronic compressed air supply unit, B1H electric compressed air supply and control, medium, B2A disc brake, on front and rear axles, B2D disc brakes with partial protection, B2X parking brake, electronic, B5J brake and electrical connections, low, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5P frame, bolted, C6C steering, 1-circuit, C6I power steering pump, regulated, C6Q stabilizer bar, front axle, C7F front underrun protection (ECE), aluminum, C7T integral rear, C8B rear axle fender, 2550 mm vehicle width, C8H fender, 3-part, with EC splash guard, C8I splash guard (EC), front, C8W omission of underbody paneling, aerodynamic, D0L smoker's package, D0S compressed air connection, in the cab, D0U smoke detector, in the cab, D1C driver's air suspension seat, comfort, D1N co-driver's functional seat, D2N seat back, release, driver's seat, D2Y seatbelt control, D3B comfort bed, lower, D4T curtain, transverse in front of bed(s), D4Y sun visor, side, driver's side, D5Y rubber floor mats, driver's and co-driver's side, D6F air conditioning system, D6I waste heat utilization, D6M hot water auxiliary heater, cab, D6Z construction site filter, D7G storage compartment cover, driver's and co-driver's side, D7R storage flaps, above the windshield, D8A roof hatch/ventilation flap, roof, E6Y reversing warning system, combined with hazard warning lights, E7F cable remote control for air suspension, F2C floor variant, tunnel 320 mm, F2G cab width 2.30 m, F2M cab, 420 mm mounting height, F2U ClassicSpace, F3C cab mounting, comfort, air-sprung, F3W cab tilting device, mechanical-hydraulic, F4H cab rear wall without window, F4X external storage compartment flap, left, F4Y external storage compartment flap, right, F5Y A-pillar trim, F6D windshield, tinted, with band filter, F6I front mirror, heated, F6Q air horn, F6T MirrorCam, F7Y cab entry, left/right, movable, F8B 2 remote control keys, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, G0K driving program economy/power, G0R transmission torque arms, optimized for assembly, G0T Predictive Powertrain Control, G2B transmission G 211-12/14,93-1,0, G5A single-plate clutch, G5G Mercedes PowerShift 3, H2C saddle coupling dimension +600 mm, I4A wheel arrangement 4x2, I5A 18.0-tonner, I6D semi-trailer tractor unit, I6I vehicle production plant, Wörth, I6X air suspension, rear axle, J1O tachograph digital, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeakers, 2-way system, J2U navigation system, J3Z axle load measuring device, J6C multimedia cockpit, interactive, K2P tank 390l+130l hydraulic oil, left, 650x700x1365 mm, aluminum, K3V AdBlue tank 60 l, left, L1D automatic high beam/low beam and turning light, L1I fog lights, LED daytime running lights, L2H side marker lights, flashing, L2R 2 LED rotating beacon lights, L3A work lights, lower, L3C work lights, cab rear wall, upper, L4Z stone guard grille, metal, for headlights, M0C underbody panel, against dust swirling, M0Q noise regulation, according to UN-R 51.03 level 2, M5V High Performance Engine Brake, M6L air compressor, 2 cylinders, M7I insect protection grill Dwjdpfozdbn Asx Aa Iec

Condition: new, TECHNIC Single-Disc Floor Scrubber/Polisher Choose the professional TECHNIC series – one purchase, many applications! The TECHNIC JH-005 model is a powerful, versatile single-disc scrubber/polisher designed for heavy-duty cleaning, deep cleaning, and polishing of various floor types (PVC, porcelain stoneware, terrazzo, concrete, linoleum, stone, and many others). TECHNICAL SPECIFICATIONS OF THE TECHNIC SCRUBBER: Model: JH-005 Manufacturer: TECHNIC Series: Professional Power supply: 1 / 230 / 50 (Ph/V/Hz) Connected load: 1100W Disc rotation speed: 154 RPM Power cord length: 12m Steel handle and control grips: Yes Machine weight: 48kg Brush/pad working diameter: 410mm Noise level: ~60dB Machine dimensions (H x L x W): 122cm x 55cm x 40cm TECHNIC SCRUBBER EQUIPMENT: 1 x Hard PPL brush (0.8mm) 1 x Medium PPL brush (0.5mm) Dedpfez A Trtjx Aa Iswc 1 x Soft PPL brush (0.3mm) 1 x Pad holder with plastic drive plate 6 x Americo-type scrubbing pads (6 hardness levels) 1 x Cleaning solution tank 1 x Drain hose for the head 1 x Power cord holder 1 x User manual (Polish and English) APPLICATIONS OF THE TECHNIC JH-005 SCRUBBER The machine is ideal for use in: cleaning companies (routine maintenance and deep floor cleaning), schools, government offices, hospitals, clinics, office buildings, warehouses, production halls, workshops, hotels, guesthouses, restaurants, commercial facilities, shopping malls, shops. Thanks to interchangeable brushes and pads, a single machine allows you to: scrub and deep-clean, refresh and maintain, prepare surfaces for protective coatings. ADJUSTABLE HANDLE: The polisher features an adjustable handle, allowing the height to be precisely tailored to the operator's stature. This enables the machine to be operated in a natural, upright position, significantly reducing fatigue in the back, shoulders, and arms during extended use. An ergonomic handle setting also ensures better machine control—making it easier to maneuver near walls, in corners, or along narrow corridors. Proper handle height improves not only comfort but also steering precision, directly impacting work quality and safety. The JH-005 model stands out due to its steel handle and grip assembly; this sets it apart from many other polishers on the market, where these components are often made of plastic. The handle is the part most vulnerable to damage, as it is used to guide, lift, transport, and often lean the machine against walls. The use of steel significantly increases resistance to cracking, breakage, and deformation, thereby extending the machine's overall service life. Thanks to the handle's robust metal construction, the TECHNIC scrubber is more durable, safer to operate, and better equipped for intensive professional use.

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Maximum swing 660mm Swing over cross slide 660mm Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm Djdpfxszuy Tdj Aa Iowc

Condition: used, mileage: 55,449 km, power: 92 kW (125.09 HP), first registration: 11/2006, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: automatic, emission class: euro3, loading space width: 1,740 mm, loading space length: 3,350 mm, loading space height: 1,870 mm, Year of construction: 2006, total length: 5,651 mm, total width: 1,974 mm, total height: 2,800 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, Well-maintained Ford Transit 125 T350 panel van L3/H3 with automatic transmission and shelving system +++ Steering wheel paddle shifters +++ Ex-government vehicle from the German Federal Police, regularly serviced with a full service history. This vehicle was used exclusively to handle breakdowns of fleet vehicles outside the facility. It was always kept in a dry, heated facility and is therefore in excellent condition. Features: - Automatic transmission with steering wheel shift paddles - Air conditioning - ABS - 2 airbags - Individual front seats with armrests - Electric mirrors - Central locking with remote Dsdeyumpajpfx Aa Ijwc - Rear doors with 270° opening angle - Rear step - Side sliding door with window - High, closed rear wing doors - Roof-mounted rear strobe lights Cargo area: - Wooden flooring with shelving system - 220V external power supply with fuse box and on-board sub-distribution - Roof cutout with Plexiglas insert for daylight in the cargo area Full service history, last inspection at 54,064 km Very good all-season tires from DOT 2018, 7.5/8.0 mm tread depth, no signs of cracking (vehicle was stored indoors, shielded from UV light) Cargo area dimensions: 3350 x 1740 x 1870 mm (L x W x H) This Transit drives well and the automatic transmission shifts smoothly; also an ideal base for a camper conversion. +++ Subject to error, modifications, and prior sale +++

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, height adjustment type: electric, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 700 rpm, total width: 1,480 mm, total length: 4,440 mm, total height: 2,700 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, Vertical glass drilling machine with two opposing spindles – the hole is drilled from both sides at once, with no blow-out on the exit side and no need to turn the sheet. Brand new, made in Poland, CE. Batch drilling up to 20 holes – the cycle is programmed once, then the machine runs it on its own Automatic glass thickness measurement (±0.4 mm) – the PLC calculates spindle depth by itself Bar positioning accuracy ±0.7 mm – minimises cracking and chipping Hole chamfering – electronically controlled 7" HMI panel – operator training approx. 3 hours Modular design – servicing without dismantling the machine 10 years of remote online support from purchase, 12-month warranty Specifications: Dimensions 4,440 × 1,487 × 2,793 mm · weight 1,900 kg · spindle speed 700–2,800 rpm · max. drilling height 1,050 mm · max. sheet weight 200 kg · pneumatic clamping · drill cabinet for 70 bits · thin-wall bits 1/2", L=75 mm · float glass Dwjdszyb Sropfx Aa Isc EXPOGLASS® – Polish manufacturer of glass processing machinery, 12+ years on the market.

Condition: like new (used), TECHMI Automatic Filling and Capping Machine – Stainless Steel TECHMI automatic filling and capping machine, designed to integrate the operations of product dosing/filling and subsequent placement and closing of caps or capsules onto containers in a single machine, for use in industrial packaging lines. The equipment features a compact configuration with automatic container transport, filling stations, and a capping system, allowing both operations to be performed sequentially and automatically. Its enclosed design with transparent guards also provides safety and visual access to the work area. Primarily constructed from stainless steel, it is particularly suitable for professional installations in the food and packaging industries. MAIN FEATURES -Manufacturer: TECHMI Dwodpox S E Spefx Aa Ijc -Type: Automatic filling and capping machine -Integrated operations: filling + capping/closing -Automatic operation -Continuous container feeding -Automatic positioning at workstations -Dosing/filling system -Automatic cap or capsule placement system -Closing head -Automatic transfer between operations -Integrated infeed and outfeed conveyor -Primarily stainless steel construction -Control panel/HMI -Adjustments for format adaptation -Complete enclosure with transparent guards -Compact design for inline integration -Industrial construction for continuous operation PROCESS Containers enter automatically via the conveyor and are positioned at the different stations of the machine. In the first phase, the product is dosed into the container. Subsequently, the filled container is transferred to the capping section, where the cap or capsule is placed and closed. Once both operations are completed, the closed containers are automatically discharged to the next stage of the line. Can be integrated with: Container feeders Product preparation and feeding systems Cap feeders/orienters Conveyors Weight checkers Detectors and inspection systems Labeling machines Coders Case packers End-of-line equipment APPLICATIONS Particularly suitable for food industries, canning companies, sauce, cream, puree, condiment manufacturers, and other packaging companies that require automating filling and closing operations. The exact product configuration, dosing volume, container format, and cap type will depend on the equipment and format currently installed in the machine. The combination of TECHMI filling and capping in a single automatic unit provides a compact solution to reduce transfers between equipment and automate the packaging process. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Price quoted per unit. Professional LeCroy 9354AL digital oscilloscope designed for advanced measurements and diagnostics of electronic circuits. The device is equipped with 4 measurement channels, a 500 MHz bandwidth, and a high sampling rate, making it suitable for research laboratories, electronics service centers, industrial automation, and R&D departments. Technical specifications: • Manufacturer: LeCroy • Model: 9354AL • Type: digital oscilloscope • Bandwidth: 500 MHz • 4 measurement channels • Sampling rate up to 2 GS/s • Acquisition memory up to 8 Mpts • BNC inputs • Built-in CRT screen Condition: Dwedozaf Skspfx Aa Ijc Used device, fully functional. The oscilloscope starts up correctly and displays waveforms. Normal signs of wear and tear are visible, resulting from use and storage. Note: One of the plastic housing elements at the back has a crack. The damage is purely cosmetic and does not affect the device's operation or performance parameters.

Condition: used, mileage: 37,167 km, power: 125 kW (169.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263271 Former non-binding recommended retail price of the automobile manufacturer: 85,917 € 1st owner, accident-free, with service booklet, non-smoking vehicle ---- HIGHLIGHTS & PACKAGES * Winter package * Charging package for instrument panel * Cargo compartment package 2 * Smoker package * Auxiliary electric heater ASSISTANCE SYSTEMS * Blind spot assist * Mercedes-Benz emergency call system * Breakdown management * ECO start-stop function * Cruise control * Headlamp assist * Rain sensor * ATTENTION ASSIST * HOLD function * Active brake assist * Traffic sign assist * Active lane keeping assist * Parking package with reversing camera * Crosswind assist ENGINE, GEARBOX & CHASSIS * 9G-TRONIC AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * Communication module (LTE) for digital services * MBUX multimedia system Dwedpjzr Tgxefx Aa Iec INTERIOR * Coat hooks in the driver's cab * Interior ceiling light(s) in the front/rear area with door contact switch * Lashing rails on the side wall to the roof frame * Cargo compartment lighting via motion detector * Grab handles for entry for driver and front passenger * Grab handle for entry to the sliding door of the cargo compartment on the partition * Semi-automatic TEMPMATIC climate control system * USB socket 5 V * Entry handle on the rear left corner pillar * Climate zone 1 (cold/comfort) * Entry handle on the rear right corner pillar * Wooden floor * Lashing rails on the side wall to the side protection * Multifunction steering wheel * Seat heating for driver * Seat heating for front passenger * Load anchoring rail system * Storage compartment above the front windshield * Pre-wiring for electrical system, configurable special module * Maturin black fabric * Cup holders in front * LED light strip in the cargo compartment * Comfort roof control unit * Airbag driver * Airbag front passenger * Comfort driver seat * Front passenger seat (double seat) * Comfort headrest for driver * Partition wall, continuous * Speedometer km/h * Steering wheel adjustable in inclination and height * Leather steering wheel * Cable duct on the side wall * Storage compartment under the cockpit * Cable duct on the rear portal LIGHT & VISION * 3rd brake light * Adaptive brake light TECHNOLOGY & SAFETY * Hill start assist * Parking brake, electric * Jump start contacts * Seatbelt warning system for front passenger seat * Seatbelt warning system for driver's seat * Outside temperature display * Seat occupancy detection for driver's seat * Anti-theft and burglary alarm system EXTERIOR * Rear doors, double-wing, opening to the side wall * High roof * WET WIPER SYSTEM * Step at rear door * Sliding door, right * Side marker lights * Exterior mirrors, electrically foldable * Heat-insulating glass with band filter on the front windshield * Exterior mirrors, heated and electrically adjustable * Towing eye, rear * Acoustic package * Interior panelling of cargo compartment up to roof height (wood) OTHER EQUIPMENT * Mercedes-Benz MobiloVan with DSB and GgD * without increase/decrease in permissible total weight 3,500 kg * Van * 3.5 tonner * Wheel arches, loadable * Fleece battery 12 V 92 Ah * Step lights * Front axle with increased load capacity * Electrical system for trailer socket * Additional construction measures * Generator 14 V / 250 A * Signage / printed material in German * Basic * Noise reduction measures * Vibration dampers * Vehicle HVO compatible * Head unit Europe/CIS/Mongolia Addit

Condition: excellent (used), Year of construction: 2022, operating hours: 54 h, functionality: fully functional, machine/vehicle number: 3W2I324202513, Equipment: charge status display, lighting, ALIEN-X The latest C-arm version introduced to the market in January 2019 (our unit manufactured in 2022). The system is designed to have a working performance similar to an angiography unit or a stationary hemodynamics unit; therefore, it will not be affected by the high temperature of the X-ray unit or other components. The C-arm movement is both motorized and manual. Isocentric active anti-collision system geometry on the FPD and X-ray side. Compact and stable with a perfectly balanced C-arm, which is safe for all movements. Excellent maneuverability thanks to two large anti-static steering wheels. Latest generation start & stop system with excellent ergonomics and easily recognizable (color-coded) steering wheels. Durable cable connections between the C-arm and the trolley, resistant to mechanical damage, special paint for quick cleaning and disinfection. Generator power: 25kW Detector: 3030 X-ray tube: dual focus 0.3-0.5 mm Anode speed: standard and high speed available Control console: no. 2 synchronized ETS15-18 (on the C-arm and on the trolley) ETS15-18: real-time images and reference images displayed C-arm movements: manual – motorized – hybrid C-arm position storage: no. 4 arbitrary positions Anti-collision systems: active systems on both the FPD and X-ray tube side Adjustable monitor: 4K Small-sized trolley: separate from the C-arm Foot pedal New EPB power supply systems X-ray tube Alien X uses the latest generation of X-ray tubes with a titanium, zirconium, and molybdenum (TZM) plate. The advantages compared to using pure molybdenum plates are: better resistance to deformation, higher recrystallization temperature, and higher thermal resistance. Dwsdpfxsz Dft Eo Aa Isc Anode capacity 400 kHU 104 kHU/min anode dissipation High anode rotation speed Dual focus 0.3-0.5 mm 1200 W dissipation in the housing WAD + EHC WAD (Water Aided Dissipation): X-ray tube cooling system; through the combination of dielectric oil management within the radiology complex, coolant, and an advanced heat exchanger, there are no fans in the sterile field. EHC (Eurocolumbus Heat Control): real-time control of the heat generated with immediate actions to change frames/s and/or pulses and/or imaging and radiological parameters to ensure optimal system operation and avoid overheating. Manual with motorized drive – HYBRID The Alien X C-arm movement can be done both manually and with a motor; manual movement is easy, and the system can be operated simply and ergonomically thanks to dedicated handles. Hybrid movement allows the combined use of both movements. Motorized horizontal movement is also available as an option. This option is mandatory if the EIC package is required. EPD anti-collision system However, it should not be overlooked that a flat detector must have certain important features, regardless of the technology used, namely: 16-bit DQE ≥ 75% MTF ≥ up to 55%

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Djdpfx Aezg Tzxja Iswc Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.