Used Schechtl Max 200 & Msb 200 for sale (35,855)

Condition: new, Year of construction: 2026, Quick reverse movement, high cutting capacity with low power Strong steel welded frame structure Maintenance-free guides and bearings. Iedpfx Ajl Exypsmisib Operating pedal, safety buttons Front material support up to 920 mm 5m 32Amp cable to power the machine CE certificate Automatic stop with digital position readout, length 0 - 750 mm with pneumatic sheet support system with rear material pick-up compressed air connection required min. 6 bar

Year of construction: 1982, condition: excellent (used), Make: STRIFFLER Isdpfx Aefdxd Esmisib Type: 2766 Year of construction: 1982 Dimensions: approx. 0.8 x 0.8 x 1.2 m All information without guarantee. A demonstration is in our showroom at any time

Condition: like new (used), Packaging line for shrink bags The line consists of: Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxWxH): 1060x440x200 mm Machine dimensions (LxWxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7.0 kW; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel housing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption: 50 l/min at 6 bar Automatic water supply control Water drainage Automatic water level control Integrated scale protection Timer for preheating water Iiedpfx Asy Iv Iajmijb

Condition: new, maximum load weight: 36,156 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Year of construction: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical data Speed: 80 km/h Total weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Empty weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading area length: 13,600 mm Fifth wheel height loaded: 950->1,050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Total width: 2,540 mm Technical description Loading area: Loading area in extendable design with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Cut-outs in the outer frame of the loading area for hanging tensioning straps. (LC 2000 da N) Seat supports: JOST seat supports (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles: SAF axles: SAF axles CD, air-sprung, with disc brakes (377 mm), with lifting/lowering function. (ET 120). The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually. Axle tool. (± 80kg) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel construction made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat in a single color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint possible. Electrical system: Electrical system in accordance with EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included Yellow-red air couplings on the galvanized front connection panel. 2 pieces of brake shoes with holder. 2" kingpin A galvanized steel bulkhead approx. 2200 mm high. (± 105kg) EN12642-XL Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer. Iedpfx Ameg Sk Tveijib European reflector signs (red-yellow) on the rear of the trailer. Loading area with approx. 38 mm thick hardwood floor. (± 320kg) 10 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. (± 30kg) 1 spare wheel holder under the loading area on the right in the direction of travel. Tires 435/50 R 19.5 as selected by the manufacturer. A mud flap ( ) on the rear of the trailer. Manual and description on USB stick. A bracket for a rotating beacon on the rear of the trailer. One bracket for a rotating beacon on the gooseneck and on the rear panel on the left and right the warning signs including a socket. An INOX toolbox across the loading area. (1000x400x2500) (± 135kg) 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' container or 1 x 40' container, an additional locking point is provided in the pull-out for a 45' container. (± 90kg) 4 pairs of WADER container locks. (± 60kg) 10 pairs of galvanized plug-in stanchions approx. 100 x 50 mm, 1,000 mm high. (± 220kg) 3 pairs of stanchion pocket strips, mounted across the loading area, for plug-in stanchion

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data Isdpfx Asudvt Rsmisib + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: reconditioned (used), Currently, two identical machines are still available. Mechanically redesigned machine with new LTG StoreControl L control system. External dimensions: Height 5,200 mm (adjustment possible for an additional charge) Width 1,600 mm Depth 2,800 mm 38 beams, each with a payload of 250 kg with clear usable dimensions: W = 1,300 mm D = 825 mm H from 55 to 750 mm Total machine load capacity up to 2 x 10,000 kg Start of the access opening at 875 mm above the top floor, then 875 mm high Color: GRAY/BLUE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur. Performance data: Vertical drive 1 x 3.5 kW / 400 Volt Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Iedpsd Hxpvofx Amisib Delivery and installation currently primarily in Germany, Austria, and several neighboring countries.

Condition: new, Our best seller, as long as it comes to making many kinds of springs, including torsion, double-torsion, extension & wireforms. Cheap in price, but valuable in terms of production rates, accuracy and possibilities. Isdpfji Ik D Eox Amioib

Condition: new, The CR 35 (up to Ø 3.5 mm) completes the range between the CR 23 (up to Ø 2.3 mm) and the CR 45 (up to Ø 4.5 mm). The machine has between 12 and 16 axes, below are the 12 basic axes: - wire feed - wire rotation - nozzle rotation - servo spinner - 8 independent slides (8 axes) Optional (up to 4 axes): Iijdpovbdq Rofx Amieb - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for lifting the second (German-type) extension spring eyelet. Maximum feed speed: 54 m/min. Machine dimensions: 2.36 x 2.10 x 2.10 m. Machine weight: 2,300 kg. If you have any further questions, please do not hesitate to contact us.

Condition: used, 200 running meters Pallet Rack Schäfer Palflex Used equipment in good condition, see pictures. Height: 6.5 m Depth: 110 cm, galvanized Bay load: 24,000 kg Beam length: 4.1 m, orange Load capacity per beam/level: 3,000 kg Negotiation price: €17,900 net ex stock The offer includes: + 49 pre-assembled frames, depth 110 cm, height 6.5 m + 288 beams, length 4.1 m, load capacity per level 3,000 kg + 576 safety locking pins + 196 concrete anchors Iijdpfjvfnnzex Amieb Used corner guards available immediately at an extra charge of €15 each net! Load capacity plates, documentation etc. are of course included. Additional accessories are available in the accessories catalog. Goods are in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information upon request. Over 5,000 running meters of pallet racks from various manufacturers always in stock. (Specifications, information and pricing subject to change and prior sale! Please see our Terms & Conditions. All prices ex VAT ex stock.)

Condition: excellent (used), Professional face mill from the renowned brand GARANT (Hoffmann Group), designed for high-performance machining. Overall diameter: 200 mm. Mounting hole: 60 mm. Equipped with indexable inserts – easy handling, suitable for work under heavy industrial conditions. Very good condition, the tool is ready for use. An ideal choice for use in machining centers and industrial milling machines. Iiedpfxow Sav Uj Amisb

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg IPE4MAX Ijdpfx Amowcl Uloijib The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Technical information • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar Iisdewc Rk Eopfx Amisb TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Isdpotu Truefx Amisib Мы говорим по русски! Viewing please only by telephone arrangement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v Iedpfstu T I Uox Amijib The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: excellent (used), Year of construction: 2006, Viessmann Vitorond 200 Output: 160 kW Burner: Weishaupt oil or gas burner available upon request Viewing by prior telephone arrangement only! Preferred sale to dealers, tradespeople, or for export. Iodpfx Amsmnqc Hjioib All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. We will, of course, handle all formalities Loading possible

Condition: new, For sale: Robust, precision industrial coupling from the renowned Japanese brand C-max / Fuji Seiko Co., Ltd. Model: 51288015900 Production date: 17.01.2006 The coupling is intended for use in CNC machinery, drive systems, industrial automation, spindles, and rotary axes. Equipped with a four-point mounting flange and sleeve mounting with locating balls. Iiodpfjw Rdvijx Amiob ⸻ Technical data: • Outer diameter: 81.03 mm • Flange diameter (bolt hole spacing): 63.04 mm • Total length: 52.96 mm • Inner sleeve diameter: 31.46 mm • Locating element with groove: 50.75 mm ⸻ Manufactured from high-grade steel, stored as warehouse stock – condition very good, minimal storage marks. Original manufacturer's packaging with Japanese label. /////Price per piece/////

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 Iiodeya Nf Ijpfx Amieb THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, Iijdeh R Tvtepfx Amieb chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, color: other, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. Iiodjy Dpl Repfx Amisb *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit Ijdoyfua Uspfx Amijib

Condition: excellent (used), COMPLETE TETRA PAK LINE MODEL TBA9 200ml SLIM FILLER TBA9/200S, V120, YOM 1993, 52.000 RUNNING HOURS TSA 36 STRAW APPLICATOR U-form TETRA PACKER TCBP 50-030 WRAP AROUND TETRA MULTISHRINK TMS 63-050V, packing 2X3 CONVEYORS SYSTEM THE LINE IS STILL IN PRODUCTION Iiedpfovvn Ayox Amijb

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Iisdpfswk Dvqjx Amisb The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Please state your offer price. Iiedpfx Amowk Dycoieb Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 31 kVA, controller manufacturer: Fanuc, controller model: i Series, total height: 300 mm, total length: 3,447 mm, total width: 2,835 mm, table width: 200 mm, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (3+2) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Ijdpfjy St Sdox Amijib Machine Type: 5 Axis (3+2) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 3+2 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 3+2 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications Manufacturer: Doosan Model: DNM 200/5AX Year: 2013 Machine Type: 5 Axis (3+2)CNC Vertical Machining Centre Axis Configuration: 3+2 / 5 Axis Control: Fanuc i Series X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Tool Capacity: 30 Station ATC Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Machine Dimensions: 3447 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine This used Doosan 5-axis machining centre is supplied with an excellent package of equipment, including: Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 3+2 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 3+2 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 1998, functionality: unexamined, 1ST MACHINE TOSH S.R.L. TOSH LOGICA 200 Industrial Pad Printing Machine – 1998 Heavy-duty industrial pad printing machine manufactured by TOSH S.R.L. Italy, designed for precision multi-application tampography and industrial component printing. The LOGICA 200 is a larger-format automated pad printing system suitable for demanding production environments requiring accurate and repeatable print registration across industrial products and components. Machine Details Manufacturer: TOSH S.R.L. – Italy Model: LOGICA 200 Year of Manufacture: 1998 Serial Number: 07980248 CE Marked Industrial pneumatic/electronic operation Features Large-format pad printing system Enclosed guarded print area Heavy-duty industrial construction Integrated electronic controls Precision shuttle/work table Pneumatic print head operation Adjustable tooling/fixture platform Industrial production capability Applications Ideal for: Automotive component printing Industrial product branding Promotional product manufacturing Electronics housings Plastic moulded parts Technical component marking High-volume tampography operations Condition Used industrial condition with cosmetic signs of workshop use and age-related wear. Machine removed from working production environment. Electronics and control boards remain installed. Included TOSH LOGICA 200 machine Installed control system Integrated work table/shuttle assembly Safety guarding Components and fittings shown in photographs Shipping & Inspection Loading assistance available. Inspection welcome by appointment. Worldwide shipping can be arranged at buyer’s cost 2ND MACHINE Kent Pad Printer Canada Inc. KENT Pad Printer – Industrial Pneumatic Pad Printing Machine Industrial pad printing machine manufactured by Kent Pad Printer Canada Inc., suitable for precision tampography and component marking applications. Compact and robust pneumatic-operated system designed for reliable industrial printing onto plastics, metals, promotional products and engineered components. Machine Details Manufacturer: Kent Pad Printer Canada Inc. Machine Type: Pad Printer Voltage: 230V / 50–60Hz Power: 30W CE Marked Pneumatic operation Bench/floor mounted industrial unit Features Industrial pad printing system Adjustable print table/work platform Pneumatic print head operation Safety guarding installed Electronic control interface Compact production footprint Heavy-duty cast construction Suitable for repetitive production work Applications Ideal for: Promotional product printing Plastic component marking Automotive parts printing Electronics branding Industrial product coding Small parts tampography Batch production environments Condition Ijdpfx Amey Shxfjijib Used industrial condition with visible cosmetic wear from workshop use. Machine appears complete with controls, guarding and pneumatic components installed. Included Kent pad printing machine Installed control panel/interface Adjustable work table Safety guards Foot pedal/control accessories shown Components visible in photographs Shipping & Inspection Inspection welcome by appointment. Loading assistance available. Worldwide shipping can be arranged at buyer’s expense.