Used Salvamac Legend 400 for sale (17,107)

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Redpfxoph Uk Ns Ad Rjcb Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Rcedpfx Adehyc Nws Rob Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l Rcsdpfx Ajin Et Ned Reb pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm Rcjdpfxeg Iihwj Ad Reb g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: new, Cantilever shelf, double-sided, new goods Data: - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly. Rcedpfx Adoy Uh R Tj Reb

Condition: good (used), Binder FED 400 Heat Cabinet Heat Cabinet / Drying Oven / Laboratory Furnace Industrial model with forced convection Manufacturer: Binder GmbH Model: FED 400 Design: Heat cabinet with forced convection For sale is a pre-owned Binder FED 400 heat cabinet from an industrial facility closure. This heat cabinet is suitable for laboratory, research, development, quality assurance, materials testing, as well as industrial applications. The unit features electronic temperature control, forced convection, and a stainless steel chamber in a robust industrial build. Technical Data (according to nameplate / manufacturer specifications): Manufacturer: Binder GmbH Model: FED 400 Version: E2 Serial-No.: 15-21306 Made in Germany Electrical Data: Operating voltage: 400 V Frequency: 50 / 60 Hz Power supply: 3 N~ Nominal power: 3.40 kW Current: 7.4 A Protection class: IP20 Temperature Data: Temperature range: up to 300 °C Forced convection Safety device according to DIN 12880 Class 2.0 External dimensions approx.: Width: 1235 mm Height: 1025 mm Depth: 765 mm Chamber dimensions approx.: Width: 1000 mm Height: 800 mm Depth: 500 mm Chamber volume: approx. 400 liters Weight (manufacturer information): approx. 145 kg Equipment: Binder FED 400 heat cabinet Forced convection Digital temperature control Electronic controller Stainless steel chamber Double-leaf doors Removable shelves Rear exhaust port Industrial and laboratory design Condition: Used equipment with typical signs of age and use. Visual condition as shown in photos. The device is from ongoing operation. Scope of delivery: Binder FED 400 heat cabinet Removable shelves Scope of delivery as pictured Rsdpfjy R Axqox Ad Rocb Notes: Inspection possible by prior appointment. Actual technical data, dimensions, weights, and features may vary. Information without guarantee. Subject to prior sale. Commercial sale – sold without warranty.

Condition: used, mileage: 998,389 km, power: 294 kW (399.73 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/65R22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 600 l, color: orange, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: other, total length: 8,990 mm, total width: 2,500 mm, total height: 3,900 mm, Year of construction: 2007, Equipment: parking heater, = Additional Options and Accessories = - Radio/CD = Further Information = General Information Cab type: Globetrotter Technical Information Number of cylinders: 6 Rcsdpfey Udnbjx Ad Rob Axle Configuration Tyre size: 385/65R22.5 Front axle: Tyre tread: 40%; Reduction: single reduction; Suspension: parabolic suspension Rear axle: Tyre tread: 30%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 7,517 kg Payload: 11,983 kg Gross vehicle weight: 19,500 kg Layout Number of sleeping berths: 1 Condition Damages: none = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We handle used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: good (used), Year of construction: 2015, Internal item number: 26008 Universal Milling Machine Wagner FTA 400 Year of manufacture: 2015 Travel paths: X 400 / Y 200 / Z 380 mm Spindle mounting: SK40 Speed range: 50 - 2000 rpm Table size: 750 x 320 mm Workpiece weight: max. 285 kg Main drive: 2.2 / 3.0 kW Feed: 50 - 450 rpm (stepless) Quill diameter: 90 mm Redpsymwpbsfx Ad Rscb + Hydraulic machine vice + Safety enclosure (UVV-compliant) + Coolant pump + Operating manual Dimensions (LxWxH): 170 x 170 x 190 cm Weight: 1300 kg The machine comes from an educational institution and is in well-maintained condition. You are welcome to inspect the machine under power in over 500 m² of heated storage space.

Condition: new, functionality: fully functional, machine/vehicle number: HR14346, Year of construction: 2026, load capacity: 4,500 kg, lifting height: 18,000 mm, fuel type: diesel, mast type: triplex, construction height: 3,040 mm, power: 85 kW (115.57 HP), fork length: 1,200 mm, empty load weight: 14,100 kg, total length: 7,260 mm, drive type: Diesel, construction width: 2,420 mm, Rotatable telehandler Chassis number: HR14346 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Hydrostatic Condition: New device Technical condition: New Front tires type: Solid rubber Front tires size: CAMSO A8 158 4LR1 4057020 14PR Front tires condition: New Rear tires type: Solid rubber Rsdpfx Adsyn Tcme Rscb Rear tires size: CAMSO A8 158 4LR1 4057020 14PR Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours STVZO, full cabin, CE certificate, interior mirror, exterior mirror, joystick, seat, battery 2x12V wheel chocks TÜV preparation

Condition: used, mileage: 858,893 km, power: 294 kW (399.73 HP), first registration: 07/2016, fuel type: diesel, tire size: 385/55, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2016, Equipment: air conditioning, central locking, cruise control, electric window regulation, fridge, power mirror, = Additional Options and Accessories = - 12-volt socket - Aluminum fuel tank - Armrest - Radio/CD player - Spare wheel - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Axle Configuration Axle brand: Anders Brakes: Disc brakes Front axle: Tire size: 385/55; Max. axle load: 8000 kg; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70; Dual tires; Max. axle load: 11,500 kg; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Air suspension Weights Unladen weight: 7,473 kg Payload: 12,027 kg GVWR: 19,500 kg Interior Number of seats: 2 Maintenance APK (Technical Inspection): valid until 01.2027 Identification Rcedpfx Aoy Taftod Reb License plate: 28-BHK-5 Product Safety Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Condition: excellent (used), mileage: 664,783 km, power: 294 kW (399.73 HP), first registration: 10/2000, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2000, Equipment: ABS, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - 1 sleeping place - Armrest - Disc brakes - Front suspension: Leaf - High sleeping cabin - Open roof - Rear suspension: Air - Sleeper cabin - Sper = More information = Tyre profile: 50% Brakes: drum brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Rjdpoy T Etcofx Ad Rjcb Technical condition: very good Visual appearance: very good

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: CPTXI400, type of input current: three-phase, input voltage: 380 V, ground cable length: 5,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 10,000 mm, welding current at 100% duty cycle: 400 A, welding current (min.): 30 A, welding current (max.): 400 A, The CPTX machine with inverter technology Industrial machine for simple welding tasks High ignition reliability Infinitely adjustable 100% duty cycle Increased power 30-400 AMP 100% 400 AMP Duty-Cycle including: PRO5000 4 Meter Welding Torch Earth work lead 70mm² 5 meter Rcjdpfx Aey Tuc Tjd Reb 10 Meter Interconnection Hose 24 Months warranty Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, all stainless steel Rcjdoy Ichmopfx Ad Rob mobile with outfeed conveyor belt width 400 mm dimensions: (L x W x H): ± 2.390 x 800 x 2.285 mm power 13 kW weight 850 kg

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Rcjdjvvi N Iepfx Ad Rob

Condition: used, total height: 1,850 mm, total width: 1,200 mm, total length: 1,300 mm, Colour: Grey Empty weight: 1.050 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 3.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 400 - Table length [mm]: 750 - Table width [mm]: 300 - Tool holder: SK40 - Main spindle power [kW]: 2.2 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 1600 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 1300mm x 1200mm x 1850mm (l x w x h) - Transport weight [kg]: 1050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Rcodpfxjx Hiibe Ad Rob

Condition: used, all stainless steel nett belt length 3.000 mm Rsdpfxjy H Dc Ne Ad Rjcb nett belt width 400 mm mesh width ± 8 mm suitable for thermal oil heating (= 120 kW) with top hold down belt oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with electrical hoists suitable for fire protection overall length : ± 5.400 mm overall width : ± 1.500 mm New electric control box with new electrical components

Condition: used, Year of construction: 2002, Trimmer Heidelberg TR 400 Year: 2002 Rsdpfx Aey I Rprjd Rocb - Sets of knives: Excluded

Condition: used, Year of construction: 2002, Stitching unit Heidelberg HM 400 Year: 2002 Rcjdpfx Adoy I Rn Us Rsb - Stitching heads: Excluded

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main Spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet Changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-Axis Switching time 90°: 2.5 sec Pallet changeover time: 6.0 sec Tool Changer Number of tool positions: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent magazine slots free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS CNC control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Footprint approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling device High-pressure coolant system Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Rcsdpfsy R U Ecsx Ad Rjb Note: Shaft for loading must be provided by the buyer.

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,5 t dimensions of machine L x W x H 7,0 x 1,70 x 1,70 m - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, Rsdpfjxwp Ehjx Ad Rscb faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen Redpfx Aox I Sfnjd Rscb number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA weight of the machine ca. 5,7 t dimensions of machine L x W x H 3,65 x 2,03 x 2,1 m Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm Rcodpfx Ajtqqrzed Rob capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: used, Year of construction: 1996, grinding diameter 5 - 255 mm grinding length 400 mm centre height 130 mm grinding length at plunge grinding 50 mm control SINUMERIK 805 grinding spindle speed 25 - 1400 U/min Rcodjtqqtrjpfx Ad Rob work piece spindle speed 0 - 500 U/min feed of grinding spindle slide cross 0 - 5000 mm/min table speeds 0 - 5 m/min grinding wheel diameter 450 mm total power requirement 10 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Redjy H I Ngepfx Ad Rscb Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Colour: Grey Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Material of press plates: Aluminium - Number of cylinders [pcs]: 10 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Rodpfswng S Aex Ad Rjcb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels