Used Roll Moulders - Plants for sale (10,858)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. Gjdpoh U Rzgefx Amujub SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, mileage: 100 km, first registration: 01/1996, overall weight: 8,000 kg, color: red, loading space length: 5,080 mm, loading space width: 2,420 mm, Year of construction: 1996, Equipment: crane, * Hooklift container body with Meiller crane Gsdpfjy R Hyrex Amuoub * Ex-fire department * Crane: * Meiller MK 77 RS/2 * 2080 kg at 3.95 m * 1515 kg at 5.6 m * 1070 kg at 7.25 m Container body: Hüllenkremer KA 18GX Capacity: 7.3 m³ Permissible load: 8,000 kg Rear tailgate, can be opened Cover tarp, aluminum side panels Vehicle number: MULDE Whatsapp No.: You can find more vehicle offers at: ONLINE CONSULTATION / ONLINE VIEWING / ONLINE PURCHASE AGREEMENT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY AVAILABLE AT EXTRA CHARGE Delivery service available on request. International customers have the option to make a down payment and collect the vehicle at a later date. NET export possible (for vehicles with VAT deduction). We are happy to handle your vehicle registration (Düsseldorf) as well as the creation of customs/export plates or transfer plates (5 days). Complete export processing possible (export declaration). Vehicles with TÜV used vehicle inspection reports available. On request, we are pleased to offer our GPG Used Vehicle Insurance with tailored solutions for you and your vehicle. Trade-in possible. For further questions, we are happy to assist you by phone. Opening hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00 Changes, errors, and prior sale reserved. Offers are non-binding. All information is subject to change and provided without warranty. Vehicle descriptions do not constitute guaranteed characteristics.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 56,000 h, functionality: fully functional, type of input current: AC, power: 10,000 kW (13,596.20 HP), input voltage: 11,000 V, fuel: domestic gas H, Equipment: documentation/manual, 5 CHP units of 2 MW each with Caterpillar engine generator sets, each rated at 2.5 MVA, 10.5 kV generator output, operating hours range from 26,000 to 54,000. Fuel types: natural gas and methane. The units have been decommissioned and fully preserved by the operator. Each unit comes as a complete small building, including heat extraction systems. Full documentation and maintenance records are available. Site inspections can be arranged at short notice. Available until late 2026 from Western Europe. The units are immediately ready for relocation, with dismantling to be carried out by the buyer. Gujdpfx Asy R Ebbomujb Asking price: €1,459,000 (USD 1,699,000) for all 5 units. The units will be sold as seen and must be relocated from the site by the buyer.

Condition: used, Roll Forming Line Dreistern with Accessories Machine Bed Features: - Production direction: right to left - Axis spacing: 130 mm - 18 driven stations - 1x 9.2 kW DC motor Roll Former Stand Features: - Tool width per stand: 135 mm - Working shaft diameter: 30 mm - Working shaft connection: 20 mm with keyway - Fixed lower shaft - Axial adjustment - Adjustment range UW-OW: 60 - 100 mm Scope of Delivery: - Machine bed - Strip butt welding device - Entry table - Straightening unit - DC motor - Control panel Guedpsy Sm Sdefx Amueb - Operating console - 2 straightening roll holders - 3 gearboxes - 9 roll former stands - 36 universal joints Was operating flawlessly in production until dismantling at the customer's plant. Coil decoilers and punching machines are also available from us as used equipment. For the reinstallation of the system, we can support you with: - Planning - Mechanical overhaul - Control system retrofit - Painting - Safety concept - CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Roll Forming Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: right to left Centre distance between axes: 330 mm 22 stations 18 driven stations (18 gearboxes) Quick-change plates Mechanical quick release clamps Coolant and lubricant piping 2 x 18.5 kW Bosch motors Roll Forming Stands Features: Tool width per stand: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower shaft to upper shaft (UW-OW): 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower shaft to upper shaft ratio (UW-OW): 1:1 Scope of Delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening unit 18 gearboxes 18 forming stands 2 Bosch motors 36 drive shafts The machine was running flawlessly in production until it was dismantled at the customer's site. Control system is not included. Decoilers and punching units are also available as used machines. The line can be easily extended with additional stations. We can support you with the reassembly of the line, offering: Planning Gjdpfxsy Sm A Ae Amujub Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling Line Dreistern P3.100 with Accessories Gjdpfjy Sm Apox Amusub Machine Bed Features: Production direction: left to right Center distance: 330 mm 18 stations 16 powered stations (16 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 2x 18.5 kW Bosch motors Profiling Frames Features: Tool width frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower to upper shaft: 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower to upper shaft ratio 1:1 Scope of Delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Special straightening unit 16 gearboxes 16 profiling frames 2 Bosch motors 32 cardan shafts The machine was working flawlessly in production until dismantling at the customer's site. Control system not included. Coil decoilers and punching units are also available used. The line can easily be extended with additional stations. We can support you with reassembly of the line: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: ready for operation (used), Year of construction: 2017, Number of boring spindles 4 St. Working width 230 mm Gujdjyhfhnjpfx Amujb Working height 160 mm Feed motor 11 kW Feed speed 60 m/min. Control Memory Plus

Condition: used, empty load weight: 4,802 kg, maximum load weight: 13,198 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2023, next inspection (TÜV): 12/2026, suspension: air, tire size: 265/70 19,5, tire condition: 80 %, color: grey, Year of construction: 2023, front tire size: 265/70 19,5, rear tire size: 265/70 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 40755 Hueffermann, Hook Lift Trailer * Year of manufacture: 2023 * ABS, Anti-lock Braking System * Air suspension * Pneumatic coupling head (red + yellow) * Storage/toolbox * Galvanized * Inspections: HU / AU valid until 12/2026 * Suspension type: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 4,802 kg * Payload: 13,198 kg * Permissible total weight: 18,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 80% -- 80% - Tire size: 265/70 R19.5 * Tire condition 2nd axle: 80% -- 80% - Tire size: 265/70 R19.5 * Tire sizes: 265/70 R19.5 * Front loading * Tipping function Disclaimer: Changes, prior sale, and errors reserved. More photos and videos available on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Preparation of all (export) documents Gedpeyic Hnjfx Amujub * Ordering of export/customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TüV inspections, registration service * Transfer and delivery of commercial vehicles Contact our trained staff—we will be happy to advise you.

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, side roll diameter: 190 mm, working width: 1,550 mm, sheet thickness steel (max.): 9 mm, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, swiveling upper roller, – Capacity 1550 x 9 mm – Electrically adjustable rear roller – Electrically adjustable lower roller (material clamping) – Digital display for rear roller movement – Digital display for lower roller movement (material clamping) – Hardened rollers – Conical rolling – Swing-out upper roller – Braking motor Gedpfx Amsy Rh H Tjujub – Emergency stop – Documentation – 400V

Condition: used, mileage: 125,884 km, power: 353 kW (479.95 HP), first registration: 06/2019, axle configuration: 6x2, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: cruise control, = Additional options and accessories = - PTO = More information = Front axle: Steering Empty weight: 12.130 kg Carrying capacity: 13.870 kg GVW: 26.000 kg = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. Gusdpfsydcrcex Amuob You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, mileage: 635,000 km, power: 330 kW (448.67 HP), first registration: 05/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,500 mm, total height: 3,700 mm, Equipment: ABS, air conditioning, had accident, * Motorschaden, Motor dreht, startet nicht,? Engine broken? * Mercedes Benz Arcos 2545 6x2 Palfinger T20 * hydr. Verriegelung * hydr. Unterfahrschutz * Radstand 4,80 m * Euro 6 * Telligent Automatik Getriebe * Retarder * Klima * Federung: Blatt/Luft/Luft * Liftachse * Lenkachse * ABS * Sonnenblende * Lufthörner * Euro 6, * Arbeitsbeleuchtung * DL- Anschlüsse, Duomatik AHK * Staubox * 1 Liege * Differenzialsperre * el. FH, el Spiegel, * Luftsitz * Dachluke * Bluetooth * Reifen: 315/80R22,5 ca. 30-70-60% Guedey R Hfhspfx Amuob * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: good (used), Year of construction: 2019, 1 used horizontal grinding machine Manufacturer: Granlund Gjdpfey Nxd Tjx Amuoub Model: 650 XB Year of manufacture: 2019 Operating hours: 2905 Control system: Fanuc Series 31i - B Technical Data Max. workpiece length (mm): 300 Ring groove diameter (mm): 120–650 Grinding wheel diameter (mm): 356 Grinding wheel width (mm): 75 Quill stroke tailstock (mm): 45 Equipment Automatic grinding wheel dressing device 2 x tailstock Paper band filtration system Oil mist extractor Control cabinet with cooler Grinding wheel balancing stand Dimensions: 3800 x 2800 x 2200 mm Weight: 4500 kg Special Features Deep grinding can be carried out on soft blanks. This means that there is no need to produce or purchase pre-milled can blanks, as the machine completes the entire process. The machine is equipped with an automatic grinding wheel dressing cycle, including automatic compensation for wheel diameter and cutting speed.

Year of construction: 1997, condition: used, Manufacturer: G.B.P Snc ItaliaType: three-roll millMaterials: stainless steelModel: R80Year: 1997Power: 0.37 kW3 cylinders, Ø 80 x 250 mm Gujdpfxey D Ug Ho Amuob

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Stop skirt incl. 1 pair of rolls Gjdpoy Iha Uofx Amuoub Forward/reverse operation via foot switch

Year of construction: 2018, operating hours: 4,000 h, condition: like new (used), Lanner Vetamat SFT350/063-DS32 Chip Processing System with Push-Bottom Centrifuge 100% operational, low operating hours, excellent condition, currently still installed and can be inspected on site, immediately available Manufacturer: Lanner Anlagenbau GmbH Model / Type: Vetamat SFT350/063-DS32 Machine type: Chip processing system / chip centrifuge / chip de-oiling system Year of manufacture: 2017 Commissioned: 2018 Condition: Used Control system: Siemens S7 Country of origin: Germany Original value (according to info): €183,771 net Availability: Immediate, system needs to be dismantled at short notice Technical Data: System type: Lanner Vetamat SFT350/063-DS32 Centrifuge type: DS32 push-bottom centrifuge Conveyor: SFT350/063 hinge belt conveyor Chip crusher: Lanner S50GF Lifting and tipping device: MD-3 / Vetamat Lifting and tipping device capacity: max. 500 kg Infeed hopper: wear-resistant manganese steel Infeed hopper volume: approx. 280 liters Tank capacity: approx. 250 liters Max. centrifuge throughput (acc. to offer): approx. 375 l/h Motor power DS32 (acc. to datasheet): 5.0 kW Weight DS32 (acc. to datasheet): approx. 1,650 kg Dimensions DS32 (acc. to datasheet): approx. 4,230 x 1,320 x 2,290 mm Dimension D (acc. to datasheet): 750 mm Operating modes: Automatic and manual operation Documentation (acc. to offer): Operating instructions, circuit diagram, parts lists, project planning Throughput capacity by material (acc. to Lanner documentation): - Steel / Stainless: approx. 375 kg/h - Aluminum: approx. 125 kg/h - Cast iron: approx. 560 kg/h - Brass: approx. 280 kg/h - Grinding sludge: approx. 250 kg/h Actual throughput depends on material, chip shape, and coolant used. Equipment / Scope of Supply: - Lanner Vetamat chip processing system - DS32 push-bottom centrifuge - S50GF chip crusher - SFT350/063 hinge belt conveyor - MD-3 / Vetamat lifting and tipping unit - Hopper approx. 280 liters - Tank approx. 250 liters - Coolant separation box - Siemens S7 electrical cabinet - Hydraulic unit with hydraulic oil - Coarse material lock - Inspection hatches - "Hopper" cleaning unit - "Conveyor" cleaning unit - Pump with hose and dispensing gun - Sediment baskets with Ø 2 mm perforation - Drip tray - Level sensors - "Chip wagon present" sensor - "Chip wagon level" sensor - Float switch for external tank / oil drum full - Material preselection switch - Coolant selection switch - Operator console / control cabinet with indicator lights and controls Description: For sale is a used Lanner Vetamat SFT350/063-DS32 chip processing system, year 2017. The system is designed for processing metalworking chips. It reliably separates coolant or oil from metal chips, enabling efficient de-oiling and drying of the chips, and recovery of cutting fluid / oil. Gjdpfjy N Axusx Amueub The system consists of a DS32 push-bottom centrifuge, an S50GF chip crusher, an SFT350/063 hinge belt conveyor, a lifting and tipping device, tank, coolant separation box and a Siemens S7 control system. According to documentation, the machine is suitable for short, free-flowing metal chips and metal sludge. The system is not suitable for bar ends, workpieces, scraps, waste, extremely long chips, stringy chips, or oversized coarse parts. The unit was commissioned in 2018 and is in flawless condition. The original stated purchase price was €183,771 net. Inspection possible by appointment. The system must be removed immediately due to new machinery investments.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Guedpfx Amorq Hmzouob Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: used, Year of construction: 2010, operating hours: 13,800 h, power: 1,600 kW (2,175.39 HP), For sale are 3 MTU cogeneration modules / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These plants are ideally suited for decentralized energy generation and combined heat and power (CHP) applications. Technical specifications (per documentation): * Electrical output: 1,600 kW Gujdsyt H H Nepfx Amusb * Thermal output: 1,746 kW * Gas power: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW * Voltage / Frequency: 400 V / 50 Hz Operating hours: * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h The scope of supply, as per documentation, includes a comprehensive range of auxiliary equipment and system components, including: roof-mounted air cooler, auxiliary cabinet, control cabinet, exhaust heat exchanger, water heat exchanger, pipework and ducts with chimney, oil storage room with 3 tanks and piping, as well as electrical cabling. These plants represent an attractive solution for operators, resellers, and projects in the fields of energy supply, industry, or for spare parts recovery.

Condition: used, material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m SPECIAL DEAL as is where is, WITHOUT putting into operation, in given condition mechanical roll feed drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included Gedpsvuuntsfx Amuoub max. no. of strokes approx. 1500 / min

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Year of construction: 2016, operating hours: 360 h, KIMERA SRL KM 0010 Small MULTIMIX / Concrete Mixer / Large Version • Manufacturer: KIMERA SRL • Model: KM 0010 Small MULTIMIX • Year of manufacture: 2016 • 360 operating hours • Maximum production output: 25 m³/h • Maximum batch size per cycle: 4 m³/h • Large configuration • Mobile concrete batching plant • Mobile complete system – ideal for transport by truck or trailer • Immediately ready for operation – no foundation required • Independent control unit with operator panel, USB port, start/stop/emergency stop • Premium grid covers & conveyor technology for material loading and mixing process Guedpfx Amsyxqf Ijusb • Safe and robust construction for jobsite environments • Suitable for dry and wet mix production directly at the jobsite • Efficient & precise – saves material and time through inline dosing • Total weight: 1,400 kg • Length: 600 cm • Width: 300 cm • Height: 300 cm • German machine • Immediately operational • This offer is non-binding and subject to change. - Prior sale reserved, - Errors and/or typographical mistakes excepted. - Sale subject to our General Terms and Conditions.

Condition: good (used), 3-Roll Plate Rolling Machine Type R55 Gjdpfx Amoy Rx Dceuoub Working length 1020 mm Maximum sheet thickness 1.25 mm Good, fully functional condition.

Condition: new, fuel type: diesel, axle configuration: 3 axles, color: yellow, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, * Mercedes-Benz radio Guodpjq A E Eijfx Amuob * DAB radio * Bluetooth * Sun visor * Rear window ----* Predictive Powertrain Control (PPC) * Active Brake Assist 5 * Traffic sign assistant * ECO-Roll * Crawl mode ----* HYVA roll-off body * Type: 20-47-S * Year: 07.2022 * Rockinger jaw coupling ----* Tire dimension front: 315/80 R 22.5 * Tire dimension rear: 315/80 R22.5 * Fuel tank: 400 ltr * AdBlue tank: 70 ltr. ----Internal vehicle number: 7553----Errors and prior sale reserved.

Condition: used, mileage: 270,000 km, power: 213 kW (289.60 HP), first registration: 03/2020, fuel type: diesel, empty load weight: 6,900 kg, maximum load weight: 8,600 kg, overall weight: 15,500 kg, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,240 mm, loading space length: 4,500 mm, loading space width: 2,350 mm, loading space height: 700 mm, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), hydraulics, immobilizer system, navigation system, onboard computer, soot filter, traction control, trailer coupling, - MAN TGM 15.290 BL 4x2 Multihook Roll-Off Tipper, suitable for both City containers with 900mm hook height and standard containers with 1570mm hook height; hook height hydraulically and continuously adjustable! - Cab currently blue, repaint in customer’s desired RAL color at a flat TGM rate available - Manual gearbox - Automatic climate control - Engine brake with cruise control - PTO (power take-off) - Radio with navigation system - Heated seats - Differential lock - LED work lights - Fog lights - Reversing camera - Trailer hitch with towing jaw and air connections - Matching roll-off containers available for immediate delivery as an option. Roll-off tipper body "Multihook" for containers 3.6m-4.8m, compliant with DIN 30722-1 and DIN 30722-3 - Suitable for both city containers (900mm hook) and commonly used standard (1570mm) - Lift/tilting capacity: 10,000 kg - Gross weight: 15,000 kg, unladen weight: 6,695 kg, payload: 8,305 kg - Hook height: 900–1570 mm, hydraulically adjustable - Mechanical hook safety lock - Push arm - Hydraulic container locking - Heavy-duty rollable container supports Gujdpfx Aeyv Rxvjmusb - Remote cable control (mounted on A-pillar), plus controls on the device - Emergency stop function - CE certificate and kit box - Body painted in black RAL 9005 - Toolbox - Errors and intermediate sale reserved! - More info, additional XXL photos, and directions on our website: - For inquiries in English please call ... Automatic climate control, navigation system, front heated seats, VAT deductible, wind deflector, ESP, ASR, ABS, service records, sunroof, radio, phone w/ hands-free, onboard computer, cruise control, heated mirrors, front power windows, electronic immobilizer, central locking with remote, electronically controlled suspension, trailer hitch, fog lights, power steering, rev counter, diff lock, interior filter, outside temperature display, tinted windows, electrically adjustable mirrors, tachograph, suspension: leaf/air, cab: day cab, air-suspended cab, air-suspended driver seat, heated seat, work lights, auxiliary lights, heat-insulating glazing, PTO, tipper hydraulics, one owner, emissions class Euro 6, diesel, rear-wheel drive, HSN 1516, electronically controlled braking system (EBS), particulate filter, main and emissions test renewed before sale, available for rental, fine dust badge: 4 - Green, hands-free kit.

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons Guodpfx Aswkaalomuob The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1990, functionality: fully functional, working width: 250 mm, planing height: 125 mm, spindle diameter: 35 mm, GUILLIET four-sided planer with 250 mm table width, reinforced motors, long table Guodpfxey Sk Ayo Amueb

Condition: used, Year of construction: 2000, machine/vehicle number: 90816, Technical specifications: 1st shaft: lower horizontal, 2nd shaft: right spindle moulder, 3rd shaft: left spindle moulder, 4th shaft: upper horizontal, 5th shaft: lower horizontal, 6th shaft: universal, ATS control, any width, maximum width: 230, maximum height: 120. Gujdpfjxp U R Hjx Amujb